How To Do STRING PORTAIT ART | Basics of String Art | Thread Portrait | Thread Art

[@venkateshpendota7936]

Most of the channels won't share such detailed explanation. I found interest in doing this. Thank you

[@GenieCrafts]

Thanks. I am happy that it helped you.

[@kishoremuniramu]

I found my master, best tutorial on KZbin.

[@GenieCrafts]

Thanks a lot 😊

[@MoonlightRomantic]

Thank you! Many useful tips, good intro into the thread art.

[@GenieCrafts]

Welcome 😊

[@nandinisaxena7412]

How to know where to place the first nail and in what direction should numbering go and distance between the two nails?

[@GenieCrafts]

Normally algorithms consider 3 O’ clock as starting point and nails go in clockwise order. For distance calculation please check out this video kzbin.info/www/bejne/aJrPlZ6ooMqmm6ssi=0hV0xhRVbYMlY8Ul

[@ParthBhavsar_thepianoguy05]

Finally got the answer to my curiosity 😍😍😍

[@GenieCrafts]

😊

[@rogeriosouto6261]

Thanks for sharing! You are wild! Fantastic...God bless you!!

[@GenieCrafts]

Thanks a lot 😊

[@kulprakashsinghmogliwale]

Can you share a tutorial on string art app

[@VeenaMn-or7sn]

Online class will be available for string art

[@GenieCrafts]

Yes please contact on 9819048334

[@rpathyarts]

Nice,, it was a good explanation👌👌🙏🙏

[@GenieCrafts]

Thanks ☺️

[@mishthijain]

Superb work . Thanks for uploading video Please guide how to create template for portrait? Is there any app ?

[@GenieCrafts]

Please watch subsequent video

[@ShaikHumera-9052]

Superb Bro 😍

[@GenieCrafts]

Thanks ☺️

[@NIKHILKumar-xg7pk]

Tell me how to Create Templtes 🙏🙏 It's look so awesome 💜

[@GenieCrafts]

Video coming soon 😊

[@vivekdwivedi5914]

It looks awesome....

[@GenieCrafts]

Thanks bro 😊

[@manasaravi2312]

Hello genie, I want to show you my work, where can I drop you the picture. and thank you for teaching

[@GenieCrafts]

Please share on [e-mail]

[@artistpremofficial]

Unbelievable 😍

[@GenieCrafts]

Thanks 😊

[@artistpremofficial]

What is this card board length brother?? 30 cm or 50 ?

[@GenieCrafts]

This is 34 cm diameter mdf board

[@artistpremofficial]

@@GenieCrafts thank you bro 😍

[@GenieCrafts]

@artistpremofficial welcome

[@deeproy2478]

Most useful channel 🥺❤️

[@GenieCrafts]

Thanks 😊

[@ram-t2u]

Bro can you plzz tell best app for string art to numbering?

[@GenieCrafts]

There is no best app. I work with the sites I have mentioned in my videos. It’s quite possible that one site might work for a photo and other does not. So try different sites

[@Kenny_klever]

Plz make video for the tamplets. How to make it.

[@GenieCrafts]

Please refer to this video kzbin.info/www/bejne/fYOwnaeDraqWo68

[@kingsta1194]

Hello sir can you tell me where to start markimg in square hardboard

[@GenieCrafts]

That will depend upon design and you can use a scale to evenly put marking to hammer in the nails. In case you are making portrait, then you will need to draw a circle and use the process I have already explained in my video

[@kingsta1194]

@@GenieCrafts thanks sir 💥

[@aleenaponatt1010]

Oh my god!!! So nice... you deserve millions of views and likes😍

[@GenieCrafts]

Thanks a lot dear 😊

[@devarakondanithyajyothsna375]

What are all the exact things you have used bro like board(its diameter and from where we can get that exact diameter board), nails(no of nails how to choose, is it like everytime 180 nails only or how to choose), thread and how did you mark the nails exactly at 2 degrees interval

[@GenieCrafts]

All things covered in subsequent videos. Please watch videos under String Art playlist on my channel

[@devarakondanithyajyothsna375]

Yeah thank you so much just now joined as a member

[@vlogeritsme]

Pin iron ka he ye badame Rusted lagajatahe usike liye kya kare

[@GenieCrafts]

All nails get rusted over time. So I use galvanized nails from cable clips which do not get rusted for long by time. Or if you can get SS nails of right size, then best

[@vlogeritsme]

@GenieCrafts tq

[@anburaj-zw2uq]

What is the diameter for the circular canvas

[@GenieCrafts]

18 inch

[@hussainchikhly5322]

how to decide that how much big board we should take and how we can decide the number of nails be inserted in the board?

[@GenieCrafts]

All ur answers in this video kzbin.info/www/bejne/aJrPlZ6ooMqmm6ssi=9A2TUNd1odMK7vtD

[@kulprakashsinghmogliwale]

Board size for 240 nails

[@GenieCrafts]

Please watch this video on my channel kzbin.info/www/bejne/aJrPlZ6ooMqmm6ssi=VwZAul3F_Dw7DxK0

[@gigantica000]

In some tutorials the instruction is not to let the line cross the next line, but is see you do. Sometimes you do open, sometimes crossed, you think it dont matter?

[@GenieCrafts]

Don’t understand your question. Can u explain or elaborate a bit more.

[@GenieCrafts]

Mathematically it’s not possible to cross the previous line with next line but the lines will criss-cross eventually as it’s unavoidable

[@gigantica000]

@@GenieCrafts kinda difficult for me to explain in English. I mean from the start you go from 0 to 101 to 179 but the lines crossed. Shouldn't you go around 101 the other way so the lines stay open?

[@GenieCrafts]

Ok. I understood now. Ideally yes, the loop around the mail head should be in such a way they the lines do not cross. But it does not really affect the final look that much. If we follow this principle the final look is slightly more pleasing

[@shivi_drawing]

Ye template siquin kese bnaye??? Plz iska video link send kare

[@GenieCrafts]

Check out string art playlist on my channel. You will find videos for template creation there

[@sanushas9345]

Instead of white background can I use black background with white threads?

[@GenieCrafts]

The template generated is for white background only. If you will use black ground then either you will have to use coloured thread or you will have to use white thread. If you will use white thread then you will get a negative image portrait. How it will look with coloured threads you will have to experiment and find out

[@sanushas9345]

@@GenieCrafts okay..so better I can use black thread ryt?

[@GenieCrafts]

@@sanushas9345 yes black thread on light background

[@techfeeder1]

What is the radius of board. does it change if we use board of different size

[@GenieCrafts]

For this radius was 34 cm. With bigger. Oats you can create more realistic portraits as you will be able to accommodate more nails on a bigger board

[@dilsharasheed9065]

Hi.... What thread are you using? Is it ordinary sewing thread?

[@GenieCrafts]

Yes ordinary polyester sewing thread. I’m this particular portrait I used weight 40 or 60 thread

[@rangrez_byvaish]

Hey can I know if I could use STITCHING THREAD

[@GenieCrafts]

Yes you can but y use good quality thread please

[@athiram9884]

Hello sir,Won't it go bad after a certain limit.. It shouldn't go bad when it is customised... Can you give me an idea for that... including packing? Please tell

[@GenieCrafts]

You mean board will go bad?

[@athiram9884]

@@GenieCrafts No Sir, That's what was meant when dust caught on the thread and the work went bad

[@athiram9884]

@@GenieCrafts When we give it as a gift, why don't we give it in a way so that it doesn't go bad? Can you make a video about the things to pay attention to while customizing it?please sir😍

[@GenieCrafts]

You actually need to frame it once you have finished the portrait. That way the portrait remains in closed box and does not gather dust or moisture. But you will need frame with a little depth to accommodate for the thickness of board and nail height outside the board

[@GenieCrafts]

Will make a video on that also in coming months

[@udayprakashk1581]

Brother can you make a video of Square board instead of Circle?

[@GenieCrafts]

Coming up in January

[@kostefbeats]

Diameter of nail are also important? What size on the vidoe? Thank you!!!!

[@GenieCrafts]

Unless you are using too thick nails it does not matter much. Normally I use 1 to 1.5 mm diameter nails

[@sathyamshubhavav8434]

Please do provide the product links for the other Materials too..!

[@GenieCrafts]

For board try itsybitsy.in or Amazon Online. Rest I buy from local shops

[@sathyamshubhavav8434]

@@GenieCrafts i am not able to find the right thread. If possible I request you to suggest one online product link for the Thread alone.

[@Natedawg1313]

Great video! Is there a software or something that I can generate the algorithm for any picture?

[@GenieCrafts]

Please refer to this video kzbin.info/www/bejne/fYOwnaeDraqWo68

[@losangchampa7160]

Thank you for this video! I was just wondering if there's anywhere I can buy a prenailed canvas online. I don't mind making my own but its just a little tedious.

[@GenieCrafts]

I know that there are some vendors who do provide this but not sure exactly who sells it. Alinedeco sells it I guess

[@gabyduranortega3985]

Hi! How do you keep the strings from falling apart when you take a break? How can you secure your work? Thnaks!

[@GenieCrafts]

Tie a knot on whatever nail you are. I think in one of my videos I have shown how to tie the knot without breaking the thread

[@gabyduranortega3985]

@@GenieCrafts tysm

[@GenieCrafts]

Welcome

[@irasavchuk1709]

Hello👋🏼 this is just fantastic. you are well done and thank you for such instructive videos. Can you help what nails you use, what size and how deep should they be and how many cm above the board? the space between the nails should be enough for the thread to shift only or should there be some certain margin to keep the image?

[@GenieCrafts]

Thanks a lot. All of your questions are covered in subsequent videos that I posted after this video. You can refer to the string art playlist on my channel. But still here are my replies in order 1. I use nails from 7 mm wall cable clip 2. The nails should penetrate at least 1 cm to be sure that they will not pop out due to string tension. They should be at least 8-10 mm above board in case you are using a dense design. If u r using thicker threads then it should be at least 1.5 - 2 cm above board. So it’s actually a factor if ur materials and requirement 3. Space should be enough to shift the threads.

[@ravishriwastaw9281]

How to parched hard board, from any online platform to parched same board

[@GenieCrafts]

Itsybitsy.in

[@premsagarb]

Hi bro... great work 🎉

[@premsagarb]

And i hv one doubt. .. Should the space between the nails must be only 1 cm? Or is it ok with 5 mm?

[@GenieCrafts]

Thanks ☺️

[@GenieCrafts]

As long as u have enough space between nails to weave the thread, any distance under 1 cm is ok

[@premsagarb]

Thanks a lot...btw which thread better to use cotton thread or polyester thread?

[@GenieCrafts]

@pskar4376 please refer to this video kzbin.info/www/bejne/Z5y5fqWJbLiKla8si=hCesqYgIQPJTeMnb You will have to subscribe to Rising Genie membership to get access to the video

[@payalparmar_]

Thanks a lot. Your videos are always useful. Can you please share the link to buy this circular board?

[@payalparmar_]

I found that in the description. Thanks a lot!!!

[@GenieCrafts]

Great 😊

[@GenieCrafts]

Thanks 😊

[@vibhanshumishra6711]

Sir where i can get the board online i don't find any board of 1cm thickness online...pls help me out

[@GenieCrafts]

This particular board you can find on itsybitsy.in

[@UCB-xb2gg]

Hii bro, how to calculate sheet size and nails

[@GenieCrafts]

Entire process of calculation explained in below video kzbin.info/www/bejne/aJrPlZ6ooMqmm6ssi=_qgQ5DybrCdApz_d

[@shaiksharuk2453]

How to get that loops In which app we got that numberss

[@GenieCrafts]

Please see the next video I have published after this video. Details in that video and some other videos I have published

[@mr_soundear]

Genie, what is the thickness of your thread which is use in your string art ?

[@GenieCrafts]

In this one I used weight 60 thread

[@poemasdeamor.3840]

bro how do I get the template of one with the sequence of number for the portrait of the person I want?

[@GenieCrafts]

Please watch this video kzbin.info/www/bejne/fYOwnaeDraqWo68

[@sriramrenikuntaarts]

How did u make the board edge curve design

[@GenieCrafts]

The board came that way.

[@aswathyachu4251]

What is the board you used and where did you get it from... Please replay

[@GenieCrafts]

1cm thick mdf board. Got it from itsybitsy.in

[@nikitashah911]

Cant find board can we do it on canvas hard board?

[@GenieCrafts]

Yes

[@cingizibrahim1488]

Hi. Please help me, how you get this coordinate list? How can i get this list for my ön portrate?

[@GenieCrafts]

Please check out this video kzbin.info/www/bejne/fYOwnaeDraqWo68

[@cingizibrahim1488]

@@GenieCrafts thank you very much

[@GenieCrafts]

Welcome 😊

[@vinayakgole4471]

Heyhh I loved your work .....can you give me a favour ......actually i want the same board as you used in your work or in your video's ...can you tell me where is the shop ..I want to purchase the board and materials....

[@GenieCrafts]

The shop is in Mumbai. Online store www.itsybitsy.in

[@vinayakgole4471]

@@GenieCrafts im also from mumbai ❤️......shop ia located near in ghatkopar?

[@GenieCrafts]

@@vinayakgole4471 Kurla phoenix mall and ghatkopar r city mall

[@vinayakgole4471]

@@GenieCrafts thank you so much brother .....❤️❤️

[@achalsaubhari]

is 220 size ok , the one our moms use to stitch buttons

[@GenieCrafts]

Yes

[@remi47393]

Very nice ! İ can use 30cm in diameter ? 👏

[@GenieCrafts]

Yes you can use. Just ensure that there is enough gaps between nails to loop the thread

[@vignesh.d.y4269]

Sir which type of thread you used for this ?

[@GenieCrafts]

Polyester sewing thread weight 80 or number 80

[@KavyaKanagaraj-k1q]

@genie crafts how to order the board and Which size?

[@GenieCrafts]

Online on Amazon or itsybitsy.in. Minimum size 18 inch diameter

[@selveakumar9451]

Bro how many inch is the board and can you share tha board where you brought

[@GenieCrafts]

18 inch board. Got from itsybitsy.in

[@anburaj-zw2uq]

​@@GenieCrafts name of the product

[@GenieCrafts]

Mdf board

[@vennelaakamaraj9177]

Can we use 19 inch round canvas ?

[@GenieCrafts]

Yes, theoretically u can use but I have never checked if the ring if the canvas will hold under the tension of the woven threads. I have seen other artists so it though, so you can give it a try

[@rangrez_byvaish]

Hey another doubt, I selected 180 number of pins only but in the instructions it also says 276, 281. What about that?

[@GenieCrafts]

That should not be possible. Please regenerate template once again

[@mishthijain]

Bro please tell how to generate number templates

[@GenieCrafts]

Please watch the subsequent video

[@mishthijain]

@@GenieCrafts please share the link

[@GenieCrafts]

@mishthijain please check out this video kzbin.info/www/bejne/fYOwnaeDraqWo68si=2utsoj8_8aR_a1Kl You will need to join Rising Genie membership on my channel to access this video

[@toyboygifthouse01]

How to take print for that number please tell me

[@toyboygifthouse01]

I mean that 0-180 on that board

[@GenieCrafts]

I manually add that in my nail placement diagram and then take print of it

[@pawanprajapati3572]

Wowww brother

[@GenieCrafts]

Thanks 😊

[@kulprakashsinghmogliwale]

Can we use 1inch nail

[@GenieCrafts]

Too big in my opinion. 3/4th inch is fine

[@ikshitgupta2407]

Brother how can I konw where to take zero

[@GenieCrafts]

For a circular frame any nail can be zero

[@niladhrysinha6137]

What kind of thread is best that we can use? Any suggestions?

[@GenieCrafts]

Please check out this video on my channel kzbin.info/www/bejne/Z5y5fqWJbLiKla8si=pU5kildaJDCbCPL2

[@niladhrysinha6137]

​@@GenieCrafts But for that I have to take membership 😢, I am a student as well as a beginner, can you please tell me only the name of the thread? Please brother?

[@GenieCrafts]

@niladhrysinha6137 I already told you the name of thread - polyester thread. Also I understand a lot of my subscribers are college going students and hence the membership fees of Rising Genie membership is only ₹59 a month. Extremely affordable.

[@shreyaspadmasali6532]

How many nails do you fit in this? In numbers

[@GenieCrafts]

180

[@rjbgmcuts7979]

How to draw a circle How to calculate its dimensions

[@GenieCrafts]

Use big compass to draw the circle. To calculate centre. Place board on a large paper, and draw the circle around it. Then cut the circle on paper. For the circle in half and then again fold it in half. The intersection point of two folds is centre of the circle and from there you can check the radius from centre to circumference

[@priyazgiftandvlog]

For 200 nails how i should mark this

[@GenieCrafts]

Please check out this video kzbin.info/www/bejne/b6SmgpilrZydbqcsi=qasSZRiqwX6itheP

[@manasaravi2312]

if the template starts from 131, it should start 131 and not 0, right?

[@GenieCrafts]

Yes ur starting point will be nail no 131

[@rambaburambabuteparthi8704]

Board size, app name, nail gap???? Any pic same size?

[@GenieCrafts]

All details in the videos in this playlist on my channel kzbin.info/aero/PLwVs4pEtJFqibqQhwLwMjORAhXlW13puz&si=neIeiJw2dZdEmF14

[@jyothichede1529]

Can you please give the dimensions of the wood which you have you used please?

[@GenieCrafts]

18 inch diameter mdf board of 11 mm thickness

[@sowmiyaj6050]

How can we know the numbers ,Is there any app fr numbering

[@GenieCrafts]

Please check out my other videos. I have covered this

[@niladhrysinha6137]

Can you please give us link of that thread?

[@GenieCrafts]

I get from wholesale market. I don’t have the link

[@Time-lapsebySardar]

Sir what is the size of board ? Kindly tell me plz

[@GenieCrafts]

18 inch diameter

[@G2JS]

Here is the life lesson...try ,try, succeed..⚡️⚡️🔥🔥🔥u made it man...😎 awesome...

[@GenieCrafts]

Thanks man 😊

[@ayushinagesh5537]

can please share the link for canvas

[@GenieCrafts]

Please check out on itsybitsy.in

[@dharanivelusamy6476]

Thank you so much sir

[@GenieCrafts]

Welcome 😊

[@neenaazizz]

Please share the link of the board

[@GenieCrafts]

Itsybitsy.in

[@sanushas9345]

How many nails are better for portrait design? More nails or lesser nails?

[@GenieCrafts]

180 at the minimum

[@sanushas9345]

Can I use 224 nails? Will it rouin the portrait?

[@GenieCrafts]

@@sanushas9345 you can use 224 nails. Just ensure there is enough gap between nails to easily loop the threads and the distance between the nails is same

[@sanushas9345]

0.004 (0.12mm) Diameter Thread is this thread good to use?

[@GenieCrafts]

Threads go by weight. I use weight 80 thread for portrait. Any thinner it might break

[@remya2001]

Which type of thred used

[@GenieCrafts]

Polyester sewing thread

[@rajspeaks7478]

Will this work in small cardboard or a canvas?

[@GenieCrafts]

Smaller the canvas, thinner the thread you need. But after a point you cannot use thinner thread as it will break under tension. The thinnest thread you can use is regular polyester sewing thread. Also, I would not suggest to go below 18 inch diameter

[@rajkrishnatamakhu8008]

Sir, what would be the appropriate diameter for 240 pins?

[@GenieCrafts]

I think minimum diameter should be 25 inch diameter

[@rajkrishnatamakhu8008]

@@GenieCrafts thank you sir, and last time I tried it the image mirrored, is it cause I numbered the pins anticlockwise?

[@GenieCrafts]

Yes. Number the pins clockwise

[@rajkrishnatamakhu8008]

​@@GenieCrafts thank you sir 😁

[@gifta_holics]

What can be the diameter for 250 nails and 300 nails? And how to find the diameters?

[@GenieCrafts]

Minimum 70-100 cm

[@raseemriyas2889]

Number of nails devided by 6.28 will give you the radius multiply it with 2 for diameter.

[@calmsleep8490]

Can i do this in a 12 inch bord

[@GenieCrafts]

Yes. But output might get too dense

[@calmsleep8490]

What about using normal sewing thread on 12 inch board

[@GenieCrafts]

@calmsleep8490 you will use normal sewing thread only but it will still be dense as the board diameter will be small. Also you will be able to accommodate lesser number of nails

[@s.sachin9894]

Please share the link of mdf board

[@GenieCrafts]

Please checkout on itsybitsy.in

[@s.sachin9894]

@@GenieCrafts it's in inch . I don't know how to select. Please tell me the price range ,so I will select . Big fan from Tamil Nadu 😍

[@GenieCrafts]

@s.sachin9894 search for “mdf round 18 inch”

[@YZ-mb2sr]

What kind of thread should I use to make string portrait art, pls?

[@GenieCrafts]

You need a strong thread. Normally polyester threads or nylon threads are good. But nylon threads are very slippery to handle and if accidentally you lose grip of the thread, a lot of previous loops will unravel. With polyester less work in undone. Also the thread weight should be 80. Any lower the thread will be too thick and the entire portrait will become very black, even on areas where very less threads are passing. Any higher there are chances of thread breaking. But if you are able to acquire a high tensile thread of higher weight, it will be even better

[@YZ-mb2sr]

@@GenieCrafts Thank you so much. It's really helpful advice 🥺❤️

[@GenieCrafts]

Welcome 😊

[@jayprajapati9691]

Can 126 pins are okay for 30cm diameter circular board?

[@GenieCrafts]

The problem that I have seen with less number of nails is that the template is not clear. Hence for portraits I don’t go below 180 nails. For any other design any number of nails work

[@jayprajapati9691]

@@GenieCrafts okay but the board size i have is 30 cm diameter so by 180 pins the distance is very less i.e. 0.5 cm approx. So what should i do can you suggest?

[@GenieCrafts]

@@jayprajapati9691 such small board is not ideal for portrait making. Even if you somehow adjust 180 nails and make the portrait it will come out very dense. Minimum diameter for portrait should be 45-50 cm

[@shreiakshithaa8528]

Can I use 1mm thickness thread for this potrait string art?

[@GenieCrafts]

1 mm thread is too thick for portrait. What i need is 0.25 mm to 0.5 mm thickness thread for portrait. With 1 mm thickness you will need very big board to compensate for the dense space that will be created by thick thread. Also threads are measured in weight. For portrait weight 80 is ideal thickness. Higher the weight, thinner the thread.

[@shreiakshithaa8528]

@@GenieCrafts thank yo soo much

[@GenieCrafts]

Welcome 😊

[@_music2.0]

Thank you so much

[@GenieCrafts]

Welcome 😊

[@ankitajain3476]

How v get to know where to mark 0

[@GenieCrafts]

It does not matter. You can mark 0 anywhere.

[@vijithpv6361]

How to get the templates to do the thread art

[@GenieCrafts]

Please check subsequent videos. I have explained how to generate template

[@Riimpi]

What is the length of the nails? Can you please share the link of correct nails and thread?

[@GenieCrafts]

I use nails from 7mm cable clip. They are approximately 2 cm long. I buy them from local shops, but you can easily get them online

[@Riimpi]

@@GenieCrafts Thank you Genie... We can always count on you whenever we are stuck in any doubt... Thank you so much 😊

[@GenieCrafts]

@Riimpi welcome 🤗

[@Riimpi]

Can you please also tell how did you remove the nails from the plastic part without damaging the nails?

[@GenieCrafts]

@Riimpi that’s easy. Hold the plastic part between fingers, hold the nail with pliers and pull. They come out easily

[@vennelaakamaraj9177]

How to measure for 200 nails please do help me with this information

[@GenieCrafts]

Please refer to this video kzbin.info/www/bejne/aJrPlZ6ooMqmm6ssi=D_fLZ8QMeZwJRht5

[@vennelaakamaraj9177]

I am not able to access the video

[@vennelaakamaraj9177]

Can you help me how to nail 200 nails and what is the mdf diameter I should use. Please do help me

[@raseemriyas2889]

​@@vennelaakamaraj9177 for 200 nails the diameter would be 63.63

[@Deepanshu0505]

Where did u get these numbers in series?

[@GenieCrafts]

Please refer to this video kzbin.info/www/bejne/pqCtf3h4ra2Ihtk

[@ankithasivaji1649]

Where can i download template

[@GenieCrafts]

Please refer to this video on how to prepare the template - kzbin.info/www/bejne/fYOwnaeDraqWo68

[@Apni_kaksha_by_ayushi]

Whats the size of nails nd board

[@GenieCrafts]

18 inch diameter board. Nails from 7mm cable clip

[@Apni_kaksha_by_ayushi]

Nd perfect thikness of board nd from where we can place order for this nd thread

[@Apni_kaksha_by_ayushi]

In this u use 180 nails nd if I want to create large size how to identify the perfect size of board

[@Thambolam_Short]

•What board is that? •board size?

[@GenieCrafts]

Mdf board. 34 cm diameter

[@Thambolam_Short]

Tnx😇

[@sylwiaratajczyk8534]

This is fantastic. But it just looks like pure Maths. How to determine the code?! I did t understand this part

[@GenieCrafts]

Not to worry. My channel has got you covered. Refer to these videos and all your questions will be answered kzbin.info/www/bejne/fYOwnaeDraqWo68 kzbin.info/www/bejne/rqC3Xmqwa9Z0qs0

[@diljitht6361]

That board will get on online?

[@GenieCrafts]

I did not find the same thickness online. Mine was 1 cm thick. Max I got online was 7 mm thick which should also work but I have not tried it. Also I did not do very intensive search online. So chances are you can find online

[@diljitht6361]

Okei.tnq😍💫

[@GenieCrafts]

@@diljitht6361 😊

[@abdomazar4178]

How do I get the numbers to make a portrait?

[@GenieCrafts]

Video coming tomorrow. Please enable notification to my channel. Video will be live at 11:00 am tomorrow India time. There is another video on this on my channel but the website used in that video is not working for everyone. Here is the link - kzbin.info/www/bejne/pqCtf3h4ra2Ihtk. I suggest you watch video coming tomorrow as it is better than my original video on the same process