How to Download And Install All Canon Printer Driver for Windows 10/8/7 From Canon

[@MDTechVideos]

Did I help you? Consider a one time contribution to support new daily content on this channel. www.paypal.me/MDTechVideos

[@Shyeena]

Canon states it does not have updated Drivers for Windows 10 for the older models. Mine is 2016. No driver exists on the Canon website. I've tried every suggestion, like using a Windows 8 driver. However, my Windows 10 has rejected ALL DOWNLOADS! For INCOMPATIBLITY!

[@hazim9529]

@@Shyeena MEMES. THE DNA OF OUR SOUL

[@chaesa9657]

Your paypal is error I depositted $80,000 but it stated error so i will rather donate this to others.

[@InsyirahVetstudent]

Hi i've been trying this it went well but at the end of the installation of the driver it keep on saying the printer is not detected after a while so i need to turn on and off my printer ..do you have any solution for this? Please help

[@yosiefdawit2801]

Its a shit

[@lunatic8163]

Out of all the videos I watched to install this printer. Yours is the only one that helped me.

[@MDTechVideos]

Glad to help!

[@gerharddewit4872]

Thank you. This hit the target for what I was looking for. This is not just a 10min unboxing and talking about it type of video. It shows you how to install the driver to actually get operational. Thanks!

[@MDTechVideos]

Glad it was helpful!

[@jibrankhaliljami]

I have followed the instruction and reached at the point where it was showing the msg for connecting the printer to laptop. You pushed the cancel button because you did not want to install the driver but I connected the printer with laptop and it detected the printer and start installing the remaining but it stayed they like forever. Never went farther. . What seems to be the problem. I have also changed the USB cable twice. Please guide me through

[@jibrankhaliljami]

@Rvmb not yet

[@matthewyoakum2108]

i had the same exact issue. i must have canceled and restarted the installation at least 5 times and kept getting stuck on that connection to printer page... i had to go into My Devices and forget that printer, turn off my PC, turn it back on, and power back on the printer. after that, my PC recognized the drivers and the printer.

[@jibrankhaliljami]

@@matthewyoakum2108 I'll try it and let you know he really

[@buttered_toast6404]

@@matthewyoakum2108 this worked like a charm 👍

[@ayeshabayat9300]

@@matthewyoakum2108 done this after a whole day of trying and it worked .. thanks bro

[@deemims6499]

This was so helpful. My Driver is now available and I am printing away. I didn't have to wait for the Geek Squad to call me after waiting for hours to hear back from them. Yay!

[@MDTechVideos]

Glad I could help

[@laydeelyncid2196]

Hi, my printer is not connected to the computer. Done downloading MP driver and Winwar. How to resolve this?

[@GideonBelete]

Canon will not issue drivers for this model to support the Windows 10 operating system. The Windows 7 drivers should function in the Windows 10 environment with some limitations which are currently unknown to Canon.....Any Ideas?

[@christiaanmeyns5979]

thanks for the video, i got stuck on that very last step, the installation program asks to connect and switch on the printer, I do so, hear the "bleap" from my Lenovo laptop and then...the installation program tells me it cannot detect the printer, any advice please?

[@MDTechVideos]

Glad it helped

[@pockettraces3372]

Hey, md. it was awhile ago since you have posted this, but im trying to install the driver, and about 15 minutes in, it says printer not detected, so i turn it off, and turn it back, and then it detects it again, and about 5 minutes in, it shows the same message, and never ends up installing.

[@lyssareacts0123]

Omg thank you so much. My laptop doesn’t have a disc and I needed this for my business !!

[@dailynmarin06]

Thank you I just purchased my new printer and your video helped me connect it to my Dell laptop. Happy Thanksgiving

[@MDTechVideos]

Glad it helped, and same to you!

[@eddiemarte1611]

Thank you for this video. It really helped alot. Everything went smooth until the end. Im trying to connect through USB. First is says printer detected. Wait until the installation is complete. Then after a while it says printer not detected. I end up having to turn the power on the printer off then on again. Then it will go back to saying printer detected. Wait until installation is complete. It seems to be stuck in a loop. Any advice?

[@brownskinfriendly]

Hi Eddie I have the same issue did you figure it out

[@anjub1173]

I am in same situation please help😓😔how did u installed it......... In my screen it is showing 'the printer is detected please wait installation is completed' as a loop

[@jmsjro6]

Did y'all figure this out before I take this crap back?

[@mandyjoshi8361]

Did anyone figure this out? Please help

[@nazwazulkarnain2472]

Did anyone figure it out ? I have same issues here

[@SirochaC]

Hi, I am having issues when it comes to detecting my printer. All is plugged in correctly and printer is on and it will detect the printer but then within 5 minutes it will change to say no printer is detected and to check connections

[@WasabiLuV]

Same

[@jadealbertflores9808]

the owner of that video couldn't reply to this kind of issue, haha so disappointing

[@theobservantone47]

Darnit..not working for me ..says my laptop is connected to my Mg2500 Pixma series printer but keeps saying driver not found after i follow all of the steps unfortunately ...lonnng siiigh 😕

[@elsplace896]

Should I use the disk that came with Canon pixma mg2522 printer? When I did it like you say it ended up saying no drivers were not installed. Yet on my Windows 7 older computer it worked. But I want it to go on my Windows 10 computer I just got.

[@Dastcz]

My PIXMA iP4600 is not compatible. :(

[@ritasachik3831]

I was able to do it myself! Your explanation is simple and straightforward! Thank you so so much!!!

[@hwaniekyutie]

I always had this error that the printer cannot be detected.

[@fluffyrabbit9562]

have you solved that? Because I'm in the same problem here

[@lhynchan8699]

same problem here..

[@fluffyrabbit9562]

@@lhynchan8699 i solved it. While it says that printer cannot be detected, go to settings > devices > printers and scanners After that , click on canon mg2500 and remove device. Then the printer will once installed back automatically. And you may be able to proceed the next step.

[@chiefpriest6041]

Fluffy Rabbit you practically saved my life you have no idea 🙏🏽🙏🏽

[@144VISHNU]

@@fluffyrabbit9562 Thanks a ton for putting this up. Saved me a lot of time.

[@mauropetrucci]

Do you know what to do if the model I use is not on the list ? I have a L11121E model

[@detrabaucom6765]

Thanks so much I had to do an recover on my laptop n didn't have the CD to my canon printer..thanks for making the video now I have my printer back on my laptop n am able to print! 100% works!

[@MDTechVideos]

You're welcome!

[@vickislominski7618]

Canon no longer supports my pm250...can you recommend a reputable third party for the driver? Many thanks.

[@ebantink4843]

I want to thank you for this video - it was a huge help. I thought I had run the printer program on my new laptop - but did not realise there was a separate driver for scanning. Doh !

[@TobiiiKapadyak]

Can you help me mine always popping out no printer is detected even if it is connected

[@LorenaMartinez254]

Yeah mine too. Can someone please help

[@oratilephelelo2436]

Been struggling with my printer then i saw this video n I followed all the instructionsnow my printer is working and my laptop is able to detect it . I am super happy honestly. Will be able to do print out n write my exams . Thanks you soooo much😭😭😭😭😭😭😭😭😭❤God bless

[@coffeeuniverse3040]

im still at the step 3 where i need to connect the printer to laptop. but somehow even I already secure the connection, I still can't install the driver.

[@kathyknuteson2838]

That's where I'm getting stuck too

[@alfonsoortega5408]

try all of these. Turn off any antivirus installed. Update ur PC. Uninstall any previous printer drivers.

[@michaelhastie9729]

Love all your videos as they have helped me in the past. My latest problem is, I have a Canon Pixma MG4250 printer and it has been working great for years with NO problems, until recently. Something happen with using the scanner, usually it worked automatically, but recently when I press the scanner button, I get the message "configure scanner to PC" it no longer does it automatically. I can scan using the scan utility tray, but it will only scan one page in PDF, whereas before I could scan multiple pages within PDF. Any suggestions on how to fix this?

[@diegoruiz3356]

hi, i have a problem, i installed the drivers of windows 7 on windows 10 (Cause there aren't for w10) and I can only scan, i have no the option to print (sorry for bad englids)

[@santucn987]

Sir how to download canon Xerox machine drivers and find the models??

[@narutosasuke2994]

I did it on my pixma ip2770..though its an older type of printer..but your tutorial is very helping me to install and use it.🙏🙏thank you

[@MDTechVideos]

Glad to help.

[@ajmilazarif1376]

when the file run it say " this program cannot be used with the current operating system." what should i do? 😭

[@Khair2617]

Maybe the driver you downloaded is not compatible with the OS (operating system).

[@carmonafamily228]

Same 😫 have you made it work ?

[@JOHNCENATWILIGHT11]

PIXMA MP250 has been retired, what do i for drivers?

[@lizbethcabral3666]

Thank you! You were the only one that gave all the details and orientation to get it done!

[@MDTechVideos]

You're welcome!

[@briz2106]

Hey i recently bought this printer,i did everything you said but when i get to detection of printer it says wait for installation and stays there,then it shows the start over thing again

[@briz2106]

It shows its detected as well

[@andridariciherang1052]

I have problem with mg2500 series. It cant print my page number and some footnote. And when i print some picture the botom area wont print more than half inch either. Any sugestion how to fix it..

[@THUGBABY2010]

This video put me back in business, Very, Very Helpful. 👍

[@MDTechVideos]

Great to hear!

[@THUGBABY2010]

@@MDTechVideos Great Video thanks for the help

[@hypereric5526]

Bra mine can’t detect the printer right

[@niteshgurungutube]

Thank you for this lovely video your voice is crystal clear i followed the instructions its really helpful therefore i am subscribing you too....thanks

[@MDTechVideos]

Thanks!

[@dancerkim8922]

Wait mine came with a CD,what do I do with the CD

[@Khair2617]

Insert the MiniDisc in CD-Rom which is located at the side of the laptop and install it.

[@shashankrai1996]

just break it and follow his instructions 😂😂

[@pavaudeshi7825]

Thanks sir. Finally i did it. Because of you. Very very thank u.

[@MDTechVideos]

You're welcome!

[@becomesocial1792]

Canon g 2010 ka kaise dowload hoga

[@marybassit8246]

Hello what does it mean when it says retired?

[@barbie3056]

Hello, it keeps asking me to check if the printer is connected. I do then it connected after a little bit it tells me to check over and over again. I’m this close of giving up😩

[@gavin1996able]

Same boat

[@jayrachcarelse1846]

Same bloody story here

[@marygracesiega4753]

Same here, can someone can help us with this problem?

[@shinpark2533]

Can i connect my printer without internet connection or not???

[@wijdanetablante]

bakit po kaya di ko mahanap ang model ng canon pixma mg2540s

[@blast5558]

I do everything it shows, then on step 3 it asks to connect my printer to the computer so I do that. It detects the printer and says “the printer is detected. Please wait until installation is completed” and it just stays there. It doesn’t do anything, I left for half an hour and still stuck in the same screen

[@naiumysuguimoto2868]

my printer is canon mx860 and it doesnt accept more than windows 7. I have windows 10 what should I do?

[@qiqi1429]

i tried this and its telling me printer not detected i need help

[@ralphcarloortego4544]

how about Pixma E510??

[@an2rejkk]

It have LBP-800 i nact find driver original from cannon site not work.

[@gregweston3770]

USA does not stock TS3160 as it's for another market

[@MDTechVideos]

If you can kindly elaborate, I will try and assist.

[@oscarkawan5337]

It’s literlally isen’t doing anything at the part you clicked cancel. i plugged and unplugged the printer but nothing happend. I have retried about 6 times now. I really need help

[@masternico-vlogstv9327]

License of cannon pixma mg3070s sir

[@cutevideosandlaughtrip4426]

WHY I CAN'T FIND CANON PRINTER PIXMA TS207 PLEASE ANSWER I REALLY RESPONSE

[@carmonafamily228]

When I put run file it say this program cannot be used with the operating system, please help it says to find another program that is compatible.

[@blakelycarter643]

My printer says that it's connected on step 3 and that the installation is finishing, then it says that it's not connected, even though it's still on and plugged in. Any advice or help please? Thanks in advance and have a golden day!

[@cheyennealvaro915]

MG2540S can't be searched in here

[@francis400]

I could not get either driver set up to complete, I suggest removing as many usb connected devices to help connection.

[@mthobisindokweni3616]

how do i locate a scanned document in the computer??

[@jeevanlp397]

i have problem with canon pixma mg2570

[@crissyburke8445]

I get to the point where I downloaded the driver for downloaded and download the driver and when it's downloaded I go there and I click the folder open folder and it pulls up a little man this is for security and performance performance Windows 10 is in s mode runs Microsoft verified apps to get this app you'll need to switch out of s mode what do I do because it tells me it's not safe to switch out of s mode

[@PRO-cu4oi]

bro my actual problem is that at step 3 it does say that the printer is detected and wait until installed but it remains stuck in there.

[@louanater]

except mine failed at the last step. it connects to the printer and loads. printer makes noise. printer cannot be detected lol

[@kurtravenfernandez5100]

can anyone answe me if this all canon are compatible to my toshiba laptop?

[@FadedWorld.]

When I run the setup, it says "failed to acquire information on the driver and software. Check network connection and try again" I have downloaded the software from official cannon website as well as some other sites and they all say the same. I have tried running the setup on clean boot, tried your tutorial on Fix error please check your Network Connection in Win10, tried using a completely different internet connection, manually tried changing dns, disabled firewall, reset my router, uninstalled my antivirus, contact Nasa, jumped from a building, flew at the speed of light in the vacuum of space and the error still persists....please help!

[@shaugnmarc]

SAME!!!! I need help quick

[@shaugnmarc]

Oh I found a newer version of my installer, and it works!

[@crazyjaufoxartsandcrafts3535]

yeah its pretty strait forward and stuck on processing installation

[@Trpr-dw4wx]

When I type "mg" into the search bar, nothing happens or nothing pops up so I can't choose anything, why is that?

[@atl8935]

Cannon e4270 can't download please help me

[@janewebster2877]

Thank you for the video and to comments Fluffy Rabbit made in the replies, I’ve finally got my printer up and running. Thank you 😊

[@MDTechVideos]

Wonderful!

[@assia9191]

hello, i’m on a windows 10 pro and i’m not sure what to select when it asks for my operating system because there’s no option for windows 10 pro, what do i do?

[@hypereric5526]

64 bit windows smart ass . I came here because my printer not working right not because I don’t known how to do this

[@drearynightwritings]

I don't know why it says my cable is not connected when it is?

[@jacobmartin5233]

hey dude wanted to say thanks heaps really helped out with getting it all set up thank you very much

[@MDTechVideos]

Glad I could help

[@minepixel826]

My mp diver isnt installing

[@kalaivani5698]

Thank you so much for guidence. Already installed Thank you 🙏🏽

[@MDTechVideos]

Glad it helped

[@secret4770]

Hi sir my printer is Canon g 2010 series the documents are scanned but did not save in file what is the problem and how to solve this problem pls tell us

[@tomcork8796]

Mines not able to connect in step 3 for some reason it stays on the printer connection screen for a while then says it was not able to connect to the printer even though it’s on and is connected via USB

[@jenniiilee]

Did you figure out what the issue is? Mine is doing the same!

[@tomcork8796]

Jennifer Matthews It is connected now but I’m sorry I can’t actually remember how it did it in the end might have been from trying different usb inputs on the tower

[@stefkok8579]

@@jenniiilee im having the same problem, have u figured it out?

[@finnegan8969]

Thx man, it's really helpful and it's workin fine❤️

[@MDTechVideos]

Glad to hear that

[@ducatininja3866]

Might be an old video but still works. Cheers from NZ

[@footballtraining7372]

hy how are you ? i need driver canon lbp 1120 windows 10.

[@MDTechVideos]

Google it.

[@kenbernal9028]

hi there i cant find canon pixma MP960 in SE Asia my printers are made in japan >.

[@jeme4126]

This vedio really helped me installing my printer! Thankyou so much

[@LandsDominoes52]

If you have to disc player you should included with the disc setup

[@Baruczz]

Thank you so much! Works to my MG2510

[@MDTechVideos]

Glad it helped

[@katemchardy542]

Hello .... I found this video very very helpful and I was able to follow and download. However, no matter how many times I have tried and retried and switched off etc etc etc it will not complete the installation process. It gets to the point where it detects the printer and starts the installation but then after a fairly long period telling me that it is processing the installation then it says it is not detecting the printer has failed!! This has happened at least 20 times ......... what to do???????// Thankyou for any guidance yo can give me

[@jenniiilee]

This is exactly what mine is doing now. Did you figure out what the issue is? How he ended the video is where mine is stuck at saying it can't detect a connection.

[@katemchardy542]

@@jenniiilee oh yes. I haven't got it sorted yet. It is so frustrating. Iwas hoping that it might be because I was using my hotspot and not an actual wifi connection. I have wifi being installed tomorrow and will try again. But presumably you are using a wifi connection .. so we'll see. I will let you know.

[@jenniiilee]

@@katemchardy542 I'm not sure what I did but I did get it working eventually. Hope you get yours working!

[@jennifermolina153]

im having this problem now, if you ever did fix this problem, how did you? im so frustrated rn please help:(

[@abdulhannansaleh4333]

I'm having the same problem please help

[@diwashmunda2976]

Canon Pixma 2470 driver download ,window 7 please help me sir

[@cruzitamartinez530]

were to install the paper

[@seemagambhir6447]

Printer option not coming in this pc

[@woutb.5210]

I have a canon MP 140 and no drivers availble for win 10. Comment from Cannon : "Canon will not issue drivers for this model to support the Windows 10 operating system." Thank you canon

[@wadalalowe7676]

Very helpful, straightforward, and clear!!! Thank you so much!

[@sherryikhinmwin7531]

very helpful and worked fantastically! thank you so much you have saved my life.

[@MDTechVideos]

You're welcome!

[@bowler3458]

Thanks so much for this video. I lucked out because my printer is a MG 2520 again thanks

[@MDTechVideos]

Glad it helped

[@janmitzidelapiedra2199]

Thank you buddy 😊 i don't have cd on my canon LBP6000 it's really great that i watch this

[@MDTechVideos]

Glad I could help

[@CanalEnioValcanovaCastro]

Pixma MP280 not install in win 10

[@loftop1875]

Its says that my printer is not connected but it is !

[@tonyamthoma]

I can’t get past step 3.

[@RamboRoberto2905]

Why do you move your mouse so quicly everywhere?

[@filipacandido8464]

Que isso! Obrigada!!!! Vídeos como o seu salvam quem não sabe nada e está no aperto! Adorei !!!

[@JR-sh4on]

why do i hv Printer Connection screen for every single time when i am trying to connect my laptop to the printer after several tries? Can anyone help me please?

[@pikazu2578]

Error is coming Cant install drivers

[@pikazu2578]

Actually i have lost some data from previously installed drivers... And i want to install them again And its saying error

[@pikazu2578]

Should i uninstall previous ones

[@failegion7828]

When installing make sure there isnt a "dead" driver on control panel. Simply go to control -> drivers and devices -> remove. This is so you can get a clean install. Otherwise drivers may fail over and over.

[@ignaciopereyra3816]

You are gooooooooooood

[@jaydenabreu5011]

Still confused my drivers say f Driver unavailable I don't know what to do

[@user-sz6ub1gn6j]

@@jaydenabreu5011 no just right click on the printer and click on remove>then turn the printer off, unplug it, plugged it again, and turn it on that should solve the problem

[@Zebra_M]

Thanks my dude

[@saichesetti4176]

Thank you so much sir, you solved my problem in 7 minutes

[@MDTechVideos]

Happy to help

[@rickeyb.9072]

I truly appreciate it! Thank you sir!

[@MDTechVideos]

You are very welcome