How To Download Windows 10 ARM Downgrade Instead Of Windows 11 ARM - M1 Mac Parallels VHDX UUP dump

[@RazeenMujarrab]

Tips that helped me for some of the problems that I ran into. Problem 1: ISO won't get created because some brew stuff aren't installed (namely the following: - aria2c - cabextract - wimlib-imagex - chntpw - genisoimage or mkisofs) Solution: and Continuing the steps after this worked. Problem 2: The secure boot issue. It wouldn't install Windows 10 cause of that Secure boot thing Solution: Click on the parallels menu icon and click Configure and find the hardware tab. From there just click on the TPM chip and click the minus sign at the bottom (which removes it). After you remove this, if you close Parallels and restart it, it should work. That's what worked for me. Sorry if my jargon isn't up to the mark, I'm not that tech oriented. Just helping a fellow layperson out, cheers :)

[@NadixCornu]

everything is installed^ but had no luck with iso creation =(

[@RazeenMujarrab]

@@NadixCornu what is the error message you are receiving? Maybe Andrew can help with some more troubleshooting

[@NadixCornu]

@@RazeenMujarrab Hey! Thanks for response! I’m already fixed this out =) I’m just forgot to move to the folder through the terminal where the files are located 😬 Thx!

[@fadifarid5953]

After doing this it worked but removed my network connection. Did you have a solution for this possibly?

[@Xjustlookatmex]

thank you, good man, I was stuck on this uefi secure boot and couldn't get through

[@LongNguyen-yx5bs]

For people who having the secure boot problem. Remove the pvm and install again, make sure you choose customize before installation and remove tpm chip from the hardware.

[@mohammadksu]

i get into black screen install and not sure how to do it

[@flooomedia]

thanks. its working now!

[@leoprescott7470]

Hey, great tutorial but on the last step to create the ISO, i get the error 'Unable to retrieve data from Windows Update servers. Reason: EMPTY_FILELIST If this problem persists, most likely the set you are attempting to download was removed from Windows Update servers.' Some help would be greatly appreciated.

[@abrahamfranco2627]

Same

[@lizucafaur745]

Same

[@zainabbas7440]

@@lizucafaur745 same problem i hope someone can find the issue and resolve it

[@giorgosm4]

same problem :/

[@Lior.Galanti]

I had the same problem when I tried to download the latest version, tried to install different version and it worked. pick 1 that works for you sir

[@Ranee0v0]

Hello, I installed everything and got stuck at 4:28 Error: genisoimage nor mkisofs does seem to be installed I reinstalled everything and it says they are "installed and uptodate", but stilll getting this error...

[@watermelon2438]

I've got the same error. After I use uup arm64 version instead of x64 version, and everything goes in the right way...!!

[@hollywoodmi594]

Status Legend: (OK):download completed. Unable to retrieve data from Windows Update servers. Reason: EMPTY_FILELIST If this problem persists, most likely the set you are attempting to download was removed from Windows Update servers. the file list is empty :(

[@yasinyalcn5101]

I'm having the same problem too.

[@moazbilal3051]

are you solved this is problem

[@picachufairy]

did you figure it out

[@abdullahyilmaz0]

Feature update to Windows 10, version 22H2 (19045.4355) arm64. try this version, it works perfectly

[@Jammer-tl2xr]

@@abdullahyilmaz0 ty!

[@PaulBohnenstiel]

Following come's up at the end of the ISO installation and no ISO is created. Can you help me? "Unable to retrieve data from Windows Update servers. Reason: EMPTY_FILELIST If this problem persists, most likely the set you are attempting to download was removed from Windows Update servers." I've also tried the 15.10.21 version from uup

[@hometechservices6543]

Great vid. Watched many and this is very good - clear, concise and works! Only change would be to show removing the Virtual Machine TPM as part of a Customised Initial VM Build.

[@axelwindbrake3908]

Thank you so much - it was very helpful. I am not a "terminal guy" and to be honest, I was a bit scared of what it would do to my system. But in the end, everything worked out fine. Again thanks for this effort.

[@andrewtsaitips]

Thanks, I'm not a Terminal guy either, I've always valued hwo to do this as there aren't any other good video tutorials for UUP dump online, glad I could help!

[@gijsbrechtvb]

Thank you so much, super helpful! Spend a day of struggling and with got it done within 10 minutes using your video!

[@andrewtsaitips]

Glad I could help!

[@aaront8]

Just adding to help others - When I installed the Homebrew, it sat there and did nothing while installing the XCODE portion. I had to go into my settings and there was an update waiting for me to manually update it. You also need to add wimlib and cdrtools to the brew install for the download to work. After doing this, mine downloaded fine. (I am on Monterey, fyi)

[@Ranee0v0]

thanks your comment helped me!

[@OhWowTre]

ATTENTION - If you're getting the message "not a directory" after you drag the folder in the "cd" command line, you have to go in the trash bin then drag the zip folder back in the downloads folder, then double click on said zip folder to manually extract the folder from the zip, go in that folder & select that file instead. The reason why that happened is because Mac OS automatically extracts then deletes zip files once finished downloading from your web browser (based on your settings I guess). That was the problem, the directory was named differently due to the OS renaming the folder.

[@trenbolonewings]

super important to do this

[@Zukiniii]

nothing is in the bin though help

[@OhWowTre]

@@Zukiniii it depends on your mac's settings, ultimately it's the "zip folder" you have to look for, once you find that particular folder just follow the instructions & you should be good.

[@Zukiniii]

@@OhWowTre I figured it out. You just had to delete the last line lol

[@sharkerbg5953]

I still have the error and nothing is in the bin

[@exus98]

When Installing Windows 10 ARM on my M2 Mac in Parallels i get this message: This PC doesn't meet the minimum system requirements for running this Windows Version. Can anyone help me out? How to bypass this?

[@yousufsulaiman9649]

can't install home-brew its says ==> Downloading and installing Homebrew... remote: Enumerating objects: 195566, done. remote: Counting objects: 100% (556/556), done. remote: Compressing objects: 100% (401/401), done. error: 5851 bytes of body are still expected46 MiB | 98.00 KiB/s fetch-pack: unexpected disconnect while reading sideband packet fatal: early EOF fatal: index-pack failed Failed during: git fetch --force origin

[@vishnuprasad8381]

I'm getting a "no such file" error

[@sharkerbg5953]

at 3:17 it said zsh: command not found: brew

[@dailynbeyond5845]

Hi so mine says no such file or directory when I type space cd what can I do ?

[@mohammadksu]

i have the same issue

[@JimiMoore]

Same issue for me.

[@gisella756]

why does it show Status Legend: (OK):download completed. in the terminal but still no ISO file created? :

[@9_1.1]

At 4:26 it just says “zsh: permission denied:”

[@10lilzoe]

did you ever fix this

[@9_1.1]

@@10lilzoe no

[@GermyTYT]

I received an error message called" To perform this operation it'a necessary to enter the host Os administrator credential", and it's when I remove the tmp chip. Anyone?? Thanks you

[@David96cz]

Hey... I have better idea. What about putting the iso file on some file share site like mega without having to paste f**king commands into terminal like on shitty linux?

[@ricardomachado173]

Hi! In terminal after " chmod +x uup_download_macos.sh it appears the message "zsh: permission denied" Anyone can help?

[@9_1.1]

Same

[@10lilzoe]

@@9_1.1 did u ever fix

[@10lilzoe]

did u ever fix

[@sascha6681]

I think you put a space between plus and x. Should work without. And give the terminal full disk access for security.

[@coletopping9851]

When I click enter after typing "cd" and then dragging and dropping in the file it just says "cd: not a directory". Any ideas?

[@paulvanotterdijk2123]

I have the same issue!?? Did you get an answer from someone how it should work out?

[@paulvanotterdijk2123]

Drag the folder instead of the file in the first step!

[@sebastianmorales167]

@@paulvanotterdijk2123 Paul, you mean the downloaded file from UUP? I keep dragging the file and the folder and I get the same problem.

[@9_1.1]

You have to drag and drop, then remove parts of the end of the file until it just says “cd /Users/(Your Name)/Downloads/21390.2025_arm64_en-us_multi_7811e991_convert” then press return and it should work

[@LucasAndrade-qc6ri]

I download all the uup files but the ISO is not being created

[@Andrei-hh6tp]

Hello Andrew. I get this error: Secure Boot found unauthorised changes to the firmware, operating system, or UEFI drivers. To manage Secure Boot settings, go to the virtual machine configuration settings, click Hardware, and expand Advanced Settings. Could you help out please?

[@moisescho]

Mee too...... Is there any solution? The Secure Boot feature prevented the operating system from starting. - Secure Boot found unauthorised changes to the firmware, operating system, or UEFI drivers. To manage Secure Boot settings, go to the virtual machine configuration settings, click Hardware, and expand Advanced Settings.

[@vintagewander]

@@moisescho you remove the TPM chip in the configuration window, after done removing it, restart parallels and boot windows 10 up, it'll work

[@markusgallimg]

@@vintagewander Thanks so much for the tip! It works now!

[@Andrei-hh6tp]

@@vintagewander THANKS! It's working.

[@GermyTYT]

@@isaaccoriadelrio I received an error message called" To perform this operation it'a necessary to enter the host Os administrator credential", and it's when I remove the tmp chip. Anyone?? Thanks you

[@DallasTechnical]

Mine just keeps boot looping to BSOD, I disabled TPM to see if that helps but it doesn’t

[@Beflapje1981]

On last step - when launching the .sh file - i get the error: "genisoimage nor mkisofs does seem to be installed". Tried installing these packages separately (seem to be part of chntpw) to no succes. Additional error when trying to install: "No available formula with the name "mkisofs"". Tried tips by user Razeen. Tried 'brew update', 'brew doctor', uninstalled the whole thing, reinstalled the whole thing. Nada. Errors keep coming. Online there's not much to find on it. Any suggestions are most welcome.

[@watermelon2438]

I've got the same error. After I use uup arm64 version instead of x64 version, and everything goes in the right way...!!

[@rou_wnffldktm]

Hi, I've poor connection. Do you mind to upload your's Win 10 VHDX through Google Drive? And also, I would like to know if the Hyper-V can be disabled or no in Win 10 ARM. I've Win 11 VHDX and can't disable the Hyper-V. Thanks.

[@JeffreywixYouTube]

you're device is running into a problem (blue screen). After importing ISO file into parallels and starting up windows 10

[@kevinchang3780]

Hi, I have same problem. Did you find any solutions after facing this problem

[@JeffreywixYouTube]

@@kevinchang3780 Hey man. Unfortunately not! That's why I don't use it anymore :(

[@JeffreywixYouTube]

@@kevinchang3780 If you find a solution I would love to hear it :)

[@islamicinterestofficial]

Error "press esc in 1 second to skip startup.nsh any other key to continue" I'm using macbook pro m1 13 inch

[@blosetterna]

5:27 this shows up: "There is no operating system installed in this virtual machine." please help

[@bilalvert]

I had this problem when i used the latest version of windows 10 so I used one that is a little bit earlier which is 21296 I did the same steps and make sure to turn off the TPM option then restart paralells

[@jackoscar11]

this channel going straight to 1million

[@dish3513]

Hey, I came from the other video I installed the iso finally but when I try to put it in parallels it says "secure boot found unauthorized changes to the firmware, operating system, or UEFI drivers. To manage secure boot settings, go to the virtual machine configuration settings, click Hardware, and expand Advanced settings".

[@dish3513]

I got it finally thank you so much i just had to remove the tpm from it and booted it up and it started working once again thank you so much!!

[@javedice7633]

@@dish3513 How did you fix it exactly cause I'm lost

[@andrewtsaitips]

You can try this video on removing TPM from Parallels: kzbin.info/www/bejne/mJzHhH-uZZ19bLs

[@ehmcheng]

@@andrewtsaitips followed this step and now it says there is no operating system installed on this virtual machine

[@Puddingcess_CoCo]

How to remove tpm from windows 10, go to windows 10 configuration, hardware, click on the tpm and click on the - (minus) button below the tap (next to the + (plus)). That should remove the tpm and restart your windows 10

[@javedice7633]

When trying to boot up its saying "Secure Boot found unauthorised changes to the firmware, operating system, or UEFI drivers. To manage Secure Boot settings, go to the virtual machine configuration settings, click Hardware, and expand Advanced Settings."

[@andrewtsaitips]

Another person said to remove virtual TPM and then install.

[@ricardovide02]

@@andrewtsaitips That worked for me!

[@paulvanotterdijk2123]

@@andrewtsaitips Like install it all again? I got this far! Please help me with this last piece! I removed it from configurations and replaced it again but it still tells me the same like in this original post.

[@maciek878]

@@paulvanotterdijk2123 did you manage to solve it?

[@BlueSky-mw7fn]

I followed your instructions well until I started to install windows 10. I got the message that says: The Secure Boot feature prevented the operating system from starting. How to get over that ? thanks in advance !

[@7anzalaanagy341]

me too

[@lscspotting]

did you manage to fix it?

[@islamicinterestofficial]

Click on the parallels menu icon and click Configure and find the hardware tab. From there just click on the TPM chip and click the minus sign at the bottom (which removes it). After you remove this, if you close Parallels and restart it, it should work. That's what worked for me.

[@pablonourry5838]

@@islamicinterestofficial I have searched for many hours to fix this problem and I juste try your solution and it seams work, thanks !!!

[@islamicinterestofficial]

@@pablonourry5838 Love to hear that if I help you out. Good luck man for future ✌🏻

[@NeCamp0s]

THE ONLY WAY THAT WORKS FOR ME. AWESOME

[@albertalcobe2421]

Hi Daniel, how did you do it? i have prove it today and in it says permission denied. From you name i imagine you are latin? I'm from Spain. If you don't mind contact me please. Thank you.

[@NeCamp0s]

@@albertalcobe2421 Hola. Me funcionó sin problemas. En cual paso te aparece el error?

[@traviswaibel2407]

When I open the ISO on Parallels to create the new virtual machine I am getting an error "The operation failed. To perform this operation, you must enter the host OS administrator's credentials." I have removed the TPM Chip as previous recommendations advised.

[@GARYTF2]

Hello! for some reason at the end where to drag macos.sh to terminal and do the download that drops the iso. It didnt drop it in the arm 64 folder. Parrallels doesnt seem to find it automatically if it is present anyway. It says download complete at the end of it.

[@CadeBrazil]

When installing Windows, it appears as Windows 11 and does not accept the installation... I tried everything. Why is it not recognizing this ISO as w10?

[@sharkerbg5953]

Hi Andrew, I am getting an error with the CD saying “not a directory” when ever I press enter 😢

[@raresdanielrosu3589]

If anybody was able to get the iso please send a link for me to download it, it was removed from windows update

[@BalMic26]

Hey Andy, noticed you’re using a Window snap tool similar to Aero, which one is it? It seems to work very well

[@abhignaconscience358]

If anyone's got secure boot issue remove tpm and then select device manager and change attempt secure boot to [ ] empty bracket and start vm again, hope it helps.

[@fredericruciak4498]

Thank you very much. Up to now I succeeded to install windows 10 as you described on my macbook pro M1 14. Thanks also for the tip of Wander Watterson to remove the TPM chip in the configuration window of parallels to avoid the dead end message appear.

[@NadixCornu]

Hey Andrew! Thank for your video! I have an issue: after I run *.sh at the end of downloading I'm getting Status Legend: (OK): download completed and that's it - there's no *.iso file in folder 🤷🏻‍♂

[@abraztcov]

me too is there any solution?

[@NadixCornu]

@@abraztcov In my case I just forgot to move to the directory where the files are located 😬 by typing cd command in terminal )

[@gisella756]

@@NadixCornu which part is this? because I'm having the same problem :< there is no iso folder

[@yousufsulaiman9649]

bro I'm using UTM so i just want the iso file only, can you make us link where we can download it directly

[@abraztcov]

please if you have iso share it with me

[@Zukiniii]

Help! When I try to open security settings it says app can’t be opened, it says it for almost anything and I need to open security to allow my files to install

[@diljotrandhawa6320]

hey, I get this error written below on the last line of terminal.. help me : Status Legend: (OK):download completed.(ERR):error occurred. aria2 will resume download if the transfer is restarted. If there are any errors, then see the log file. See '-l' option in help/man page for details. We have encountered an error while downloading files.

[@diljotrandhawa6320]

I did what they said in terminal like going to github, etc. i have downloaded the iso file but now iam having the secure boot problem, exactly : Secure Boot found unauthorised changes to the firmware, operating system, or UEFI drivers. To manage Secure Boot settings, go to the virtual machine configuration settings, click Hardware, and expand Advanced Settings. i have tried removing the tpm in the windows 11 but when I start installing windows 10 again it shows the same message

[@diljotrandhawa6320]

iam confused, I have even removed the tpm from the created windows 10 copy in parallels control center , but when I click on the start button it shows : Unable to perform the operation because "Windows 10 (1)" is not started. help ,me iam lost

[@vladyslav_pierce]

Please tell me, how you resolved this error "(OK):download completed.(ERR):error occurred."?

[@velazquezparejaismaelharve8252]

I had the problem not a directory

[@adrianagalvezcasillas9312]

thanks for the information. it has been very useful, but I have a problem and I can not extract the ".iso" file, after performing all the steps I get the following message: This script does not and cannot support the integration of updates. Use the Windows version of the converter to integrate updates. How can I solve it? Thank you very much

[@9_1.1]

Hi, I’ve been having a problem where when I get to the step where I put “cd” and then the file at 3:56, it just says “cd: not a directory:” is there any way to fix this? Edit: Fixed it! All I had to do was remove everything at the end of the file so it ended at “convert”

[@weixuantai2770]

Hi can I find out how do you solve the above bug?

[@WeamVFX]

@@weixuantai2770 u have to leave it as convert delte the last few words

[@bogdanpetrutiu879]

Hello! I can not get past when it needs to convert the file after you type cd and put in the file directory I type the command and it keep telling me that not such file is in the directory,can you help me please?

[@bedrock5067]

Does mgsv phantom pain run in windows 11 arm ?

[@abhignaconscience358]

no need for two steps for running sh files you can directly use sh (drag and drop macos sh file) that's it one line & no need for chmod +x

[@polaxgr]

Hey thanks for the tutorial and help! up-dump website is down and can't get the iso. Any idea where else to get the latest W10arm? Thanks

[@AjitemSahasrabuddhe]

mega.nz/file/164mWBjA#ZjDj532Ljkk4GqwEfHT04DP32x7yviWwpbJHuT5qJ08

[@DanielR1-MIDI]

@@AjitemSahasrabuddhehey, this link is down. Can you please send an updated one?

[@cdlvj]

ISO image imported OK, but win 10 will not start, complains about boot disk modifying firmware. Fixed that with reading comments. Now getting Windows Build has expired. You should move to another build.

[@kishy2456]

Hello my error is saying no such file or directory but I have it downloaded and everything... is there a certin are to put it?

[@АлексейБыстров-р7к]

hi Andrew, at the point of entering the script: brew install aria2 cabextract an error occurs warning: No available formula with the name "aria2" and then comes "error" Tell me, what is the error, what should I do?

[@juanpabloherrerareyes5355]

Amazing tutorial! Very Helpful, thank you!!

[@davidorem5915]

Hello For me..during installation windows always runs into a problem and than it crash. Can you help me with that please ?

[@ActuMoto]

Thanks 🙏 but strangely whatever win10 version I choose Win11 is installed at the end…🤔

[@majorgear1021]

The horror! I am not kidding, I don't want Win 11 either.

[@UnderGreyPreassure]

Hi has anyone got to install successfully the windows 10 21H1 or H2 arm version on a m2 macbook? Cause I am getting SYSTEM_THREAD_EXCEPTION_NOT_HANDLED error right before installation.

[@mikeleschnitman9504]

"pause updates for 7 days"...so i need to pause it every 6.5days to prevent automatic upgrade to win11arm ? anyway to pause indefintly ?

[@joshcharles920]

i ran into too many problems this stuff is annoying first after i did all that if couldnt find a file to dowload next i re did everything and the next step file wouldnt load

[@shredderspencer1122]

Thank you for your video ! But I come across a problem. It says "Start PXR over IPv4". How do I solve this?

[@umeshpradhan8414]

How to troubleshoot, "no such file or directory error? Please help

[@reboxtherapy]

Is there an ARM Linux via bootcamp for m1, m2 macs, and then a virtualize via parallels or VMware of Windos 7/10 or 11?

[@MG99901]

Got to the point where ISO created. Then tried install. Got the Error "Secure Boot found unauthorized changes to the firmware, operating system, or UEFI drivers. To manage Secure Boot settings, go to the virtual machine configuration settings, click Hardware, and expand Advanced Settings." I turned off TPM then install started, but stuck at the windows loading screen after and it does not go past that... Amy ideas or tips would be appreciated. Thanks

[@MG99901]

@JH I just closed and deleted that install and tried again and it worked.

[@MG99901]

@JH Yes. Exactly the same way. Turned off TPM and then installed again and it worked the second time.

[@paulvanotterdijk2123]

@@MG99901 how did you manage to turn of the TPM? I am really sick and tired of Parallels customer service! They are useless…

[@abraztcov]

can't create iso file would you share it please?

[@davidmackenzie7797]

@@MG99901 turning off TPM worked for me too. Thanks! I just removed it from the Hardware list.

[@calmsoul852]

can't get the brew install aria2 cab extract command to work :(

[@preemo5090]

I got an error saying that I couldn't install HomeBrew and I ran the commands and it says that the commands were unknown. Could anyone help?

[@iliciepi736]

How to download 21H2 as there is only feature update? I'm trying to make bootable standalone iso, and not just an update file..

[@davein310]

Download only gives me a 4.6mb 21390 folder. Is it no longer available?

[@psycl0ptic]

Can't you just use local Group Policy windows updates - disable updates and update notifications to disable windows updates?

[@xmiha61]

i did erverything but i cant see the iso file, but i see the others, can you please help me

[@andrewtsaitips]

Try this command in Terminal: brew install aria2 cabextract wimlib imagex genisoimage mkisofs Then run the script again

[@xmiha61]

@@andrewtsaitips thanks

[@moustaphaleffad5638]

any solution for the new openssl versions ?

[@Hanzgpunkt]

Everytime i try to install win10 arm64 on my macbook m1 i'll get a bluescreen with the message "your device ran into a problem and needs to restart..." Can anyone pls help?

[@briskyt5813]

Do you know how to do it for surface laptops?

[@jackoscar11]

what an emotional roller coaster BUT IT WORKED!!

[@paulvanotterdijk2123]

Hi Andrew Tsai, thank you for your video! I had some struggle to get it running. But it runs now! The only issue I have is that the Application I downloaded which required Windows 10 still doesn't work. Could these programs still see we run on a M1 chip? BTW I never saw a worse customer service than from Parallels, but that on the side! Looking forward to your reply.

[@gijsbrechtvb]

you remove the TPM chip in the configuration window, after done removing it, restart parallels and boot windows 10 up, it'll work

[@saswwer]

When i ran script i got this error: errorCode=28 We encountered a problem while processing the option '--checksum'. [OptionHandlerImpl.cc:395] errorCode=1 Unrecognized checksum. Do you know how to fix it?

[@andorexurix2491]

Is there no way to upload the ISO to a torrent or something? I've tried so many different builds and they all end up with the same error that it can't find some random PNG file when exporting windows 10 core to the WIM.

[@andrewtsaitips]

Some alternative methods you could try: Use Windows 11 ARM in Parallels and do the same UUP download but use the Windows bat scripts instead There is a mirror of Windows 10 ARM on archive org if you Google it Let me know if one of these work!

you're king bro

[@cotys]

I am able to create the ISO file. When I run the install, I get a blue screen of death with an error that says "SYSTEM THREAD EXECPTION NOT HANDLED" I've created 4 or 5 ISOs for Windows 10 ARM. I get the same error on all of them. I did remove the TPM chip, no change. Any ideas on this thread issue?

[@bilaalraja4567]

Make sure you are using build 21390, any earlier builds will not work with the M1 chip. I too made this mistake.

[@bilalvert]

I had this problem when i used the latest version of windows 10 so I used one that is a little bit earlier which is 21296 I did the same steps and make sure to turn off the TPM option then restart paralells

[@AbdAlgani1999]

why just download iso file is that much hard? we are using linux or what

[@SunilKumar-yn7nm]

Hi, i am using windows11 on paralles desktop 19 my system Apple macbook pro M2 series. i was trying to downgrade windows11 to windows10 as i saw in video but i couldn’t make it. please i am requesting you is it possible please send the links so direct i can download downgrade version. i will really appriciate, as i want use windows 10 but i am not able use, please assist if possible. Sunil

[@rodneysoo]

i was stuck at the step after typing "ls". could anyone pls advice

[@MantheWorldHasChanged]

Didn't work said permission denied at where the chmod area

[@impactsoft2928]

can those all accounting run win 10 run on this win 10 arm....since it is x86

[@Sooigee]

On the second step of it installing after i have the iso it blue screens, any fixes? I used the windows_cmd file to get the iso file.

[@sefidin]

same here

[@danielmakary5052]

new question now that it has turned into an iso windows 10 file can you do a tutorial on hoe to turn an iso file into vhdx plz

[@OhYeaMyBoi]

You saved me! Thanks a lot!

[@gurpartapsingh9800]

Im not able to do the step at 4.03

[@mrk8921]

Dear Andrew I have some problems in the final stage. When I start to execute my sh file and terminal pop message for "Not a directory". May you kindly support at your convenience? Thanks a lot!

[@ZJrecord]

try this : system preference > security&privacy setting > privacy > developer tools > check on Terminal . then try again

[@ZJrecord]

then run this command " chmod +x uup_download_macos.sh " then drag " uup_download_macos.sh " file to terminal and press enter. It's work for me

[@ZJrecord]

u can message me privately if u want, maybe I can help. idk maybe I can help, lol.

[@mrk8921]

@@ZJrecord Dear it works! Thanks a lot for your support. Have a great day!

[@ZJrecord]

@@mrk8921 really? Haha nice

[@vishalgawde8046]

Hi, I managed to install but its Windows 10 home. I tried both options.

[@SameerKumar-tu2lv]

I followed every step but in the last step my terminal is showing you need to install aria cabextract and some other tools

[@SameerKumar-tu2lv]

i already installed aria and cabextract but still the problem is persistent

[@andrewtsaitips]

Which other tools is it asking for?

[@SameerKumar-tu2lv]

@@andrewtsaitips it is showing that aria2 and cab extract is not installed

[@7anzalaanagy341]

Hi Andrew thanks for your efforts i try to use vm to run wrapper offline which i make cartoons videos with it for my work it is my job i was use win laptop convert to mac so too hard to run it on UTM or parallels if you help me make a videos which and how run it in any good vm and which version of windows please thankfully sorry for long write

[@7anzalaanagy341]

really tired and this is my main work

[@samuelmendez9519]

Hello, I am getting the error "Failed to export Windows 10 Core to install.wim". Any ideas as to why this is happening?

[@andrewtsaitips]

I got this with specific builds which I think are bugged from UUP, try a different build.

[@vipuLM10]

how to enble show path bar?

[@TayroneOliveira]

Eii, man... thank you for video! I have a error run the command install area x86_64cpuid.s:273:10: error: unknown token in expression cmpq $0,%rax

[@christophhofmeister3883]

if I press cd and then paste the download file into terminal it says no such file or directory what can I do?

[@andrewtsaitips]

Are you dragging the file or the parent folder of that file? You can only cd into a folder.

[@christophhofmeister3883]

@@andrewtsaitips I did it like you in your video I dragged the file from my downloads from the path shown on the bottom to the terminal

[@christophhofmeister3883]

@@andrewtsaitips sorry my fault didn’t press space after cd

[@goro7641]

thank you very much, you are really cool and deserve more!!!