HOW TO DRAIN ANTIFREEZE COOLANT ON BMW E90 E91 E92 E93 RADIATOR FLUSH

[@AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzbin.info ⛐ Our Donation Link: gf.me/u/y59hvn

[@engjds]

In a moment of insanity my friend popped in steering fluid into the coolent res, he poured in about half a pint, went for a 5 minutes drive, by pouring water into the res he thinks he got it out, but didnt do a complete flush, how serious is it to get every last drop out?

[@brianszeles9117]

this dude is the sole reason my car is running

[@leomarq]

LMFAOOO! Same 😂

[@javianjohnson8746]

Man your videos are so helpful!

[@PaulPaid]

Thanks. Still waiting for you guys to start working on another Mercedes.

[@sherenzobauer3238]

have been following, very grateful ... 2006 320i e90 , unscrewed the blue drain plug, the reservoir cap removed, a hose from radiator to engine unplugged, all bleeding screws (2) loosen and yet no coolant gets out via the unscrewed blue drain plug, what else do I miss ... thanks

[@DanielHernandez-fk5qu]

Did you ever figure this out? Thanks

[@sarahjenah5859]

Nesquick box. Check in the link of the video description. LMAO. Very good explanation as always.

[@Fearlesswolf47]

Thank you very much👍 big Support from Germany

[@ThisIsMannyG]

What was the purpose of removing that suspension support plate?

[@mariohnat]

why you don't open the cylinder block drain plug to let water out from block? I'm just asking, because I think there is enough water to contaminate new coolant with old degraded one, or not?

[@reeseboi8704]

exactly what I was thinking. If you're gonna flush the coolant to this extent, should also drain out the block too.

[@Feyser1970]

3 good remarks : 1) Its not smart to run water pump on a dry system . 2) never put a jack stand under suspension, bad idea. 3 ) why don't you open the cylinder block drain plug to let the water fall out from the block?

[@mmm-mmm-good]

He wont, so i will. Your comment is very insulting. Every line is to tell this guy he is less intelligent. Why? Keep it to yourself. 1. The system was not dry when he activated the pump 2. Bmw put the jack mounts in specific positions, its not a choice 3. Why? He did it this way, you do it your way, wheres your video helping others to learn?

[@jr8184]

My guy for the win 👍

[@GPSecurity2011]

Extremely helpful

[@bradleyerasmus7478]

Hi,i have a e90 323i n52 i have changed my oil cooler but when i wanted to drain the cooling system nothing came out when i removed the radiator drain plug and the expansion tank keeps running empty.what can be the problem....thanx

[@Zekedafreak69]

I have a 2011 bmw 328i e90. Will it be okay if I put peak coolant? I don't know where they sell official bmw coolant at

[@mattporto4530]

FCPeuro got everything for German cars. I always buy my parts there. Highly recommend them. And I live close buy their headquarters.

[@jamlarna]

I have a faulty thermostat and decided to change it myself, i wasn't going to change the coolant but it turned out it was pink /not blue green 😬 so after pulling the thermostat out all the flued from the head came out so i just got as much as i could out (without draining the radiator/drain plug as i dont have a jack /ramps or anything to get underneath) so once the head was empty i reconnected everything and put the new coolant in (it was leaking from the new housing) and the coolant looks awful! Can get all the old coolant out of the rad as well, without the drain plug ?

[@JiDoubleGTV]

Its not smart to run water pump on a dry system.

[@capeofstormz5974]

Very helpful videos.Thanks

[@valentineantonioduplessis7513]

good day, i have a E90 2005, my heater does not work on the drivers side but it works on the passengers side, what could be the problem?

[@Sydewayz4.6]

love you guys

[@emilianoramirez7249]

Do I gotta use certified coolent for BMW or can I I use other ?

[@godfatherofcinema]

you are the best!

[@yoube449]

Hello i have a 2012 x3 335i suv i was going to do the flush but i don't have a drain plug. I just trying to find the easiest way to flush the radiator without making a mess.I looked all through you tube and the is no matching car like mine.

[@00Him.]

I think it's bc that car is a turbo and has an intercooler. The intercooler sits below the radiator, U need to remove the intercooler to see the radiator and the drain plug.

[@superdupermcpooper]

Has anyone counted the "OK"s he's said in this video?

[@jounistactics]

I have an intercooler that's in the way of the drain plug!

[@AdrianJayeOnline]

never put a jack stand under suspension, bad idea

[@x1xpaintx1x11]

Do you guys have a like community for questions. I have an e46 that's been a nightmare could use a few tips.

[@mastershredder2002]

Bruh, that front bumper was not primed properly before painting.

[@rayman1738]

Merci! Thx a lot for this. Good tip on how to activate that water pump

[@AdrianJayeOnline]

pls dont try and empty bme electric water pump with no water, that will be an expensive mistake

[@Rumpel22]

Why ? Electric pump can work too without water or ? There ´s nothing wrong to do without water ... in that case your ´s water pump is without any another problem. Or am I wrong ?

[@AdrianJayeOnline]

@@Rumpel22 up to 10:08 I agree with this, however there is ABSOLUTELY no need to engage the water pump to get "a little bit more water out of the car", it does nothing for the procedure and is not necessary, IF you really wanted to, top the system up with "DISTILLED" water, close everything, run bleed the pump, open and drain, a FLUSH on these car's is NOT necessary and your NOT going to get ALL THE WATER out, never, and guess what it DOESN'T matter if you don't . pumps electric or otherwise, rely on coolant and antifreeze as a LUBRICANT, BMW electric water pumps are very temperamental, I would ERR on the side of caution and skip that step, in fact iof you look up the actual BMW procedure for this, it will never tell you to "run a bleed cycle to get the last drop out, because it's not needed , not necessary and you will NOT get all the water out, and having a quart or two in the system has no negative effect,.

[@dodoshortss]

Running the pump with an empty coolant tank has no negative effect.

[@michaelherron4306]

Is it necessary to change the coolant? BMW say lifelong coolant.

[@hitman99687]

Definitely! BMW says the same for the "life-long" transmission fluid although it's very noticeable after 100k+ miles when the car doesn't shift correctly, it's so that the car isn't drivable after a certain amount of miles! - this is personal opinion but it's easy to put it together

[@THE-GO-BRO]

Handy cheers guys

[@AD-sg5tm]

Hi I have a BMW E320i with n46 engine, and this engine has no electronic water pump, so how can i bleed the system?

[@dhalsim-1]

The n46 does have an electric water pump, but I'm sure this engine was for the 318.

[@AD-sg5tm]

@@dhalsim-1 and 320i

[@dhalsim-1]

@@AD-sg5tm What year is the car? I always thought the 320 was a 6 cylinder no?

[@AD-sg5tm]

@@dhalsim-1 2007, it's 4 cylinder

[@dhalsim-1]

@@AD-sg5tm Surely they were 2.2 litre and the 318 had the 2 litre? Unless they changed the system for the newer model e90. I know the diesel version of the e46 320 was a 2 litre

[@haidarhaidar252]

Thank you so much

[@BackInTheGame.Barbershop]

Helpful

[@zakirdawood5778]

Got oil in my coolant system how do I get it out n52 engine

[@jr8184]

Drain your system And fill it up with distilled water and drive around for a bit and drain the system again and there you go fill it back up with coolant again

[@dannyquinonez1569]

Thank you

[@azndzyzaaaah7748]

Ty

[@mikeyspringer3825]

bmw 2008 335i twin turbo how to drain coolant

[@harborfreight2323]

They don't care about you or your 335i bearing no resemblance to this same white e90 in all of their videos. As long as they get the clicks and the views with their spam.

[@javierperez644]

You used peak coolant ?

[@Tetrahfy]

I haven’t put coolant on my car for years and it overheating all the time : same with my oil haven’t had that changed in years!! Still runs like a champ tho

[@javierperez644]

@@Tetrahfy bro what 😂

[@Tetrahfy]

@@javierperez644 I still drive my 535i everyday put over 50k miles on it and havent had oil changed since i bought it , the engine heater is always on high tho

[@Tetrahfy]

@@javierperez644 Where can i do the oil shop?

[@AX5Z]

@@Tetrahfy Wtf

[@juanmanjarres7606]

Great

[@tylerangel4073]

Hey guys If I had used a different coolant before and now use the Bmw brand do I have to drain the block? Or would it be okay

[@hitman99687]

Would highly recommend you drain the coolant, then refill with your new coolant so it's not contaminated

[@ClaudiuBal]

what gas pedal bruh, the water pump is mechanichal. good luck with that one :)))

[@Chosen1Ras]

7 minutes on just removing the under cover? The video Is more than 1/2 way done ?

[@tootsitroll9785]

If your in the pacific north west and seen a zipply fiber ad. Just know they are lying about their prices.

[@MrBspace1]

You say you show whole process, but you skip taking off the covers. I need to see that part.

[@jomomaonmedic9721]

Can anyone point me to the right direction my drain plug broke inside radiator what do I do???

[@hitman99687]

If any portion of the plug fell inside the radiator, it's best to just replace it so it doesn't end up damaging any other parts.

[@tannerragsdale2862]

If it broke inside, get ready to replace the radiator lol

[@bradenharris3873]

24 hours to let your car cool off💀

[@kevingonzalez3519]

I watch all of your guises videos they are so awesome but you guys are the worst at responding at comments have not seen you respond to anyone in years LOL that would be very helpful just saying we got a lot of questions