How to drum reset Brother Hl-2130 / 2030 / 2040 /2070 / 1440 / 2150 / DR-2255

/ enerjiburomak How to drum reset Brother Hl-2130 / 2030 / 2040 /2070 / 1440 / 2150 / DR-2255
Resetting the Toner Alert
Ensure the printer is turned off.
Open the printer front cover.
Hold the Go button while turning the printer on.
When the Toner, Drum, and Error LEDs are on and the Ready LED is off, release the GO button. All of the LEDs will turn off.
Press the Go button two (2) times. The Toner, Drum, and Error LEDs will turn on.
Press the Go button six (6) times.
The Error LED should now be flashing, close the front cover.
Resetting the Drum Alert
After changing a drum unit in a Brother HL-2130, the printer’s page count needs to be reset. This will turn off the drum warning light on the printer.
Simply open the front cover, and hold the GO button until all four LED’s are lit. Release the GO button and close the front cover.
brother toner reset,
brother drum reset,
Brother hl-2030 drum reset,
Brother hl-2130 drum reset,
Brother hl-2040 drum reset,
Brother hl-2070 drum reset,
Brother hl-1440 drum reset,
Brother hl-2150 drum reset,
Brother hl-2030 toner reset,
Brother hl-2130 toner reset,
Brother hl-2040 toner reset,
Brother hl-2070 toner reset,
Brother hl-1440 toner reset,
Brother hl-2150 toner reset

[@heatherfaulkner79]

Sorted my problem, thank you!!

[@santiagohelt7143]

Funcionó en mi Brother HL 2130, estuve todo un dia entero renegando porque no funcionaba, y la solucion era asi de sencilla como mostraste en el video, Like y te sigo gracias

[@itz4u]

Hi, very informative video. It worked up to point. I have a Brother HL 2040. I did as you did in your video but all that happened was that after I closed the front panel, and click the 'GO' button again, the printer goes into warm up mode , the Yellow light goes on for the drum and toner and the rollers start rolling and doesn't stop. When I tape on the 'GO' button the red light make a clicking sound for every tap but nothing happens except the rollers in the back and top just keep rolling and the Yellow toner and drum stay lit. I have to unplug it and repeat it over but the same thing happens Thanks It went from all lights on till just the problem I have now so I know something progressed

[@yenigonzalez5143]

Muchas gracias. Pude solucionar mi problema.

[@alprsln6740]

thanks a lot brother

[@faridyahia3257]

Thanks

[@josebacasanova]

It works. Thank you !!

[@Twobitsdotcom]

Worked on my HL-5040. Thanks!

[@MahmutAltindal]

EyvAllah

[@veerchaudhary6651]

Thanks bro it's work.

[@Agustina-mr1oe]

Gracias!!!!!!

[@jgonzalezvazquez]

¡Muchas gracias!

[@zwitter242]

Buen trabajo, lo que no enseña Brother lo muestras tu.

[@JuanTeDDi]

Sos un crack

[@oliviahollenstein1082]

how i solve the problem error? is there a video?