How To Easily Build Vinyl Fence On Existing Concrete

[@xright2003]

This is how all diy tutorial videos should be like. Awesome work.

[@SWiFence]

That's a big compliment. Thanks!

[@beaudevore1990]

That seems a lot more snug and user friendly than some other types of brackets that I’ve used. Well put . Thanks Dan

[@chrism9976]

Would like to see a video for building a vinyl fence gate over a concrete opening.

[@jacksami777]

Really nice work and straight to the point!! Thanks 🙏

[@SWiFence]

You're welcome!

[@fatbomb7832]

How will this setup hold up in wind, especially on a 50' run? Where I live we sometimes get days of consistent 20-25 mph winds with gusts 40-50 mph. Seems like I watched a video a few years ago where they drilled 4 holes through the concrete, then anchored long pieces of rebar through the holes into the substrate. After setting the vinyl posts over the rebar they poured concrete in the top of each post deep enough to cover the exposed rebar. Looked like a lot of work compared to your method and not sure if it was overkill. Any thoughts?

[@rebeccam7922]

Thank you so much for posting this video and for posting the links. It was extremely helpful!!!!!!

[@SWiFence]

You're so welcome!

[@TheObserver37]

I like to take my hammer drill and drill three holes inside the 5x5 post then hammer down some rebar I sleeve the post over the rebar and then fill it with concrete like a Masonary technique works pretty good.

[@encryptow989]

When the concrete expands in the winter it will break the vinyl....tried it

[@rasputian2010]

Every time I sleeve over chaillink I use gravel or pea gravel it gives you a lot of wiggle room if they are not in line with each other like almost all chainlink fences.you can always cut up you scrap vinly to make post inserts. You should be screwing all your bottom rails in no matter what. High wind can flex it enough to pop them out even if you can't wiggle them.

[@hhova29]

Good video. I want to put a 4x6.5 gate on one side of my home that has a 8’ wide space. Has a concrete border and pavers. Would love one steel post you have on there but idk what to do about my paver floor base for the remaining 2 post I would need to install

[@chargermopar]

Around here there is sweat involved as soon as you leave the air conditioned truck. I have seen flanges mounted to concrete like that but electrolysis and rust always seems to take hold in a few years unless a rubber or asphalt soaked spaced is used. Vinyl fence is hardly ever used here but the steel or aluminum picket fences over galvanized frame is very popular. Prefab concrete fences are too, and for those you need to core through the concrete, There is a skid steer coring bit but it is slow and the core likes to get stuck.

[@mindfulmutt]

I sure wish you guys were in Utah!

[@billvarady1091]

Nice video, My niece has a house with fence posts already installed from a previous fence. The posts are not evenly spaced but close. I want to help her out and install a fence over the existing posts. Where do I get good quality fencing that I can cut to fit the spacing between the posts. The posts are already installed into a cement pad so they will be hard to remove. Pleas help.

[@frankieg8908]

Come to my home and install vinyl fencing!!! Good job!!

[@silver60618]

Hi Im trying to use this method to install a 3" aluminum post to galvanized pole. I cannot find donuts this size, is it possible to fill the void with concrete or expanding foam?

[@shariff4473]

Great video!

[@SWiFence]

Hey thanks!

[@byronwoolley8191]

Great work and having fun while doing it

[@isaiah6437]

I have a wooden fence that I am replacing w vinyl. But my posts are postmaster type posts. Is it possible to apply vinyl posts onto my existing postmaster steel posts?

[@SWiFence]

There is not an adapter to achieve this that I'm aware of.

[@Wilder9032]

And also how far apart do you recommend the donuts to be?

[@Wilder9032]

How tall of galvanized post do you use in this video?

[@pjlf5806]

Nice job!

[@SWiFence]

Thanks!

[@MYCHANNELWITHMYSTUFF]

If my vinyl post is 5 feet to the top of the post cap do I buy the 4 foot SS40 post or should I cut a 5 foot SS40 to fit?

[@SWiFence]

I'd just go with the 4'. You don't need that steel post extending up into your top rail.

[@MegaFry94]

Can you build a gate on something like this? Or what would you recommend to be a good solution for something like that?

[@SWiFence]

Yes you can. 👍🏻

[@0013619511]

Thank you awesome job

[@SWiFence]

Our pleasure!

[@serenaprendergast8750]

Cool video. Behind you next to the all vinyl fence it looks like corrugated metal inside a vinyl frame. I’m trying to come up with a solution to create a privacy fence in my new backyard. Vinyl is so expensive to surround a large space. Is it corrugated metal? Thanks

[@SWiFence]

It is! 👍🏻

[@georgebrims4973]

I wish I could find those donut things and the simple posts with flange. The big bx stores don't seem to carry them, and the fence companies kind of sneer and want to come round and quote me for an install. Any suggestions?

[@SWiFence]

Yes! Buy them from us! 😁 👉🏻 Fence Post Donut Adapters: bit.ly/SWIpipedonut 👉🏻 Self-Drilling Screws For Donuts: bit.ly/SWI-TY3-1-4x1 👉🏻 Plated Post For Concrete-Mounted Vinyl: bit.ly/PlatedPostVinyl

[@georgebrims4973]

@@SWiFence Thanks! I did actually order the donuts from your site, and they arrived today. Waiting on a couple of things to arrive at the big orange bucket store, and the project begins!

[@thomasbailey9820]

Great video

[@halflight87]

Where can I get the pipe with the plate welded to it?

[@SWiFence]

You'd have to try to find a welder locally to help you out. Or we can ship them to you. bit.ly/PlatedPostCL

[@NeilAyala11]

I want to use 2x2" steel fence post for a 5x5 vinyl post. Is there a doughnut or some sort of adapter for that?

[@SWiFence]

Do you mean 1 7/8" round steel post? If so, yes, there are adapters for that: bit.ly/178pipedonut

[@NeilAyala11]

@@SWiFence no the square 2”x2” post

[@SWiFence]

I'm not familiar with an adapter for that but it doesn't mean they're not out there.

[@fenceman95]

Give the information about the anchor bolts. Name-brand-dimensions-ect. tks

[@SWiFence]

3/8" X 3". bit.ly/concretescrew 👍🏻

[@kurtnewman4459]

Loved the vid. Thanks for working in the cold. U da boss.

[@brittfraley8416]

Where can I get these post mounts at sir?

[@SWiFence]

👉🏻 Plated Post For Concrete-Mounted Vinyl: bit.ly/PlatedPostVinyl 👉🏻 Galvanized Floor Base Plate: bit.ly/galvbaseplate 👉🏻 Concrete Screws: bit.ly/concretescrew 👉🏻 2 3/8" Donut Adapters: bit.ly/adapterdonut 👉🏻 1 7/8" Donut Adapters: bit.ly/178pipedonut 👉🏻 Self-Drilling Screws For Donuts: bit.ly/SWI-TY3-1-4x1 👉🏻 Rail Locks: bit.ly/raillock 👉🏻 Self-Drilling Screws For Rail Locks: bit.ly/SWI-TY2-8x3-4

[@dteachout1]

Where can I get that gray ribbed fencing behind you?

[@SWiFence]

If you're in Wyoming or Florida, from us! 307-578-8040 Otherwise you'll have to call around and see who has the good stuff. We source our vinyl from National Vinyl Products out of Nephi, UT.

[@jpab632]

We’ll done..!! Do work in north jersey?

[@SWiFence]

No, sorry.

[@nelsonjovanlohse8598]

what height ss40 pipe should i get for a 8ft vinyl posts?

[@SWiFence]

I would use 9' posts.

[@mannycabrera8006]

Did you end up cutting the bottom of your vinyl post so you won’t the the gap underneath the floor?

[@SWiFence]

Yes, for sure, those were trimmed down to size. 👍🏻

[@mannycabrera8006]

Ok thank you. Thanks for the fast reply aswell

[@mannycabrera8006]

Where did you purchase the metal post from and donuts?

[@mannycabrera8006]

Does this method works the same with asphalt?

[@SWiFence]

I wish it did but sadly no, concrete only.

[@craigfay7355]

Where find materials for 8 ft fence

[@SWiFence]

We don't have them listed on the website, but we will custom make 8' postmaster posts with welded baseplate to order. Give us a call at the shop. 307.578.8040

[@prophetseven728]

Cool Video. How do you not have an open space at the bottom? I want to put a small Vinyl fence on top of a block wall to block out the neighbors. As they are just storing stuff in their yard and it looks bad. Good for them. But I like not to see it at all.

[@SWiFence]

The space at the bottom is all about measuring. You can leave yourself as much or as little as you want. If you're not on concrete you have to deal with the contour of the land as well, but you can still get pretty close.

[@prophetseven728]

@@SWiFence Thanks! If you know of someone that can do this work in Los Angeles, North Hollywood. Let me know! Thanks!!!

[@christinehoppel4744]

Why don't you sell the welded base/post product?

[@SWiFence]

Give the guys at the shop a call. They'll help you out. 👍🏻 307-578-8040

[@pjmtts]

Do the donuts come in pears?

[@SWiFence]

They come in as-many-as-you-want. 😄 👉🏻 2 3/8" Donut Adapters: bit.ly/adapterdonut 👉🏻 1 7/8" Donut Adapters: bit.ly/178pipedonut

[@scottmcneely4115]

Can you build/install a gate using this same method?

[@SWiFence]

Yes.

[@rogerbettencourt9654]

If you want to skip wearing the respirator/mask you could go with an OSHA Table 1 compliant roto hammer, basically has a built in vacuum. Nice video, slightly disappointed that I didn’t get to see a bunch of tasty doughnuts 🍩.

[@popeyeyankee5477]

Have you ever heard of anyone putting a vinyl post over an old wood post? The company who installed my gate did exactly that. Should I be concerned and tell them to come back and correct it?

[@SWiFence]

We wouldn't do it that way but different contractors have different methods. The longevity of your post is going to be determined by the quality of the wood post they installed over. If it's solid and there's no signs of rot you're probably ok for a while.

[@s28278187]

I can 100 percent say in this video DAN was sober.

[@SWiFence]

Indeed I was!

[@siulcontreras4464]

👍👍👍👍

[@EliBleu]

not everyone can weld a post to a plate but thx for the other info

[@SWiFence]

If you're not comfortable doing it you should be able to find someone in your area who can weld them up for you. If you need to you can always buy them from us (www.swifence.com/plated-post-ss-40-6x6.html?id=44194424&quantity=1) (prices include freight).

[@EliBleu]

@@SWiFence Damn those are nice.. I bought some cheap alternatives but I may get these .. Can I use these with 4x4 post caps.?

[@EliBleu]

@@SWiFence ... or do you have 4x4 base plate as well??

[@SWiFence]

We do have the 4x4 version as well: www.swifence.com/plated-post-for-concrete-mounted-vinyl-fence-2-3-8.html?id=81640137 Give the guys at the shop a shout if you've got details you need to work through. 👍🏻 307.578.8040

[@RayWilliamJohansen]

would this work on wood? im trying to build a 5 foot wide fence gate on existing concrete

[@SWiFence]

Yes, but I'd go this route. kzbin.info/www/bejne/q2nEnH6EaLCLors

[@Mr.T6942]

Where do you get the donuts?

[@SWiFence]

Links are always in the description. 👍🏻 bit.ly/SWIpipedonut

[@Mr.T6942]

@@SWiFence found it after I asked lol