How to Easily Restore Plastic!

[@amazinblaze9115]

Little late to comment but man was in recovery mode and still rode it better than I could keep it up man!

[@marcust9918]

toilet footage and even a buttcrack joke, while trying not to laugh. I have heard MEK, will restore faded plastic too, haven't had a chance to try it though

[@pgmurray76]

Its hard to spray the MEK evenly. You could pour it over a surface. It is more for bonding acrylic and polycarbonate. An all metal airbrush would work nicely - while wearing a respirator. I used bond battery packs using Resin Bond by Ventex. It is MEK essentially.

[@mindovermatter3988]

Cameron you are who I want to be when I grow up, even though I'm already grown up 😂 23. Everything you do is my dream, fixing my bike's giving them so much care and attention. Paying attention to every small detail and figuring out how you can make things better. I hope things work out for me as they seem to have for you

[@duaneeldredgeELDG702]

Love the vids I took you advice and got the free sample. It made my sons crf50 look amazing. If your on a budget use a tiny bit of boiled lin seed oil on an old rag. YOU WILL BE AMAZED what it does to old plastics. 👍

[@pgmurray76]

I have to play with the Cerakote Trimcoat a little bit. I believe the hydrophobic polymers may be super useful to coat a sanded yellowed car headlight. It may or may not bond nicely to smooth polycarbonate. Seems very clear too. I'll have to try on a spare headlight. I'll leave the wipe folded and use an edge like a brush. The polymers will wick out the edge like a permanent marker providing a nice level coat. Especially on a smooth surface. It would possibly be a better or similar value than the 3M Headlight Clearcoat ($5 for two saturated folded wipes). Cerakote Trimcoat package has ten wipes inside and is not at all expensive. I've successfully reused 3M product by using it and sealing immediately. To try it once won't hurt. Regardless, I need to protect my black plastic lower panels on my car. Especially after wiping them furiously with a cotton cloth and 91% isopropanol. Cerakote Trimcoat would put them over the top in color depth.

[@GrandpaNutz]

Dinner plates and butt crack, gotta keep those things clean! Lmao! 😂😂😂

[@JJMLJ]

I'd love to see you restore an old white gas tank, like one from an XR or similar....

[@pgmurray76]

Woaa. That coating is definitely hydrophobic. The resting water in the toilet had like a 110 degree contact angle! (Yes. My eyeballs are calibrated tensiometers.) It is like the water is floating.

[@pgmurray76]

I always wax my sinks and faucets with car polish. It's like magic to clean them. I have waxed parts of a toilet too. I did the bowl where water constantly dripped. Cerakote Trimcoat will make any troublesome materials stay off the surface better than wax.

[@christianDipietrantonio]

Nice Video! I apply an Auto, Boat, & RV ceramic coating to my 2014 kx250f's plastics, fork tubes, gas tank, outer engine components , rims, etc. The coating has preformed amazing over the last year that its been applied to my bike. It makes washing the bike very easy as well as retaining color and shine!

[@Danman1972]

So, the bumper on my truck should hold up for like 50 years! I wash that bad boy once or twice a year weather it needs it or not!

[@bradleythomsen3083]

You're probably thinking, how can I add available garage space? You're in luck! I've been working diligently for months and am happy to say I've made room in my 10x10ft for that CR250. We'll be in touch.

[@charliehannan9465]

“Wow,just fricken wow “ got me 😂

[@brianwalker7771]

I wonder how well it would work on electronics. Old TV housing , Atari,Sega game consoles

[@slpn9t]

I gotta say I like your how to vids. Learning a lot from you , thanks

[@jimmadonna1436]

Cameron, thanks for getting me HOOKED ON.Cerakote. I can't wait to see if it will keep my bike looking great for years to come. WD 40 works well in the tolit, and keeps it looking good.

[@silkcustoms520]

Cameron. Your the man. Insane Skills. Raw talent. Did you ever try New Wipe for plastics, etc. stuff is Amazing and lasts for years. I used on my Dirt bike Plastics and they look Showroom.

[@jeffloucks2120]

I need to order this stuff up for my car and truck.

[@lex1945]

Seems to be really cool stuff. That would save me a lot of work!

[@r0ckworthy]

I'd like to see the Restoration Wizard Niemela do a plastic restoration video on the "retro-bright" job that restores a white plastic that has been badly faded to tan from years of oxidation and UV light. For instance an old bike's plastic coolant overflow tank, or bike plastic that used to be white but now it's become all yellowed and dingy.

[@tpghl5225]

Never thought cleaning the shitter would be so cool!

[@bradleythomsen3083]

Props for the future examination.

[@newbeginnings8566]

Firstly the hard water issue... Invest in a good quality water softener.. We did and wow the difference is so good.. The cleaning time in the bathrooms is much reduced.. Your washing machine, dishwasher, hot water heater, kettle etc will last so much.. longer... Your fiancée will appreciate softer hair, softer clothes and better bubble baths.. Next the Cerakote trim coat... Quite expensive so will it really last? Wanting to do my Audi Allroad trim with this but just hesitating as to is it worth it?

[@theziptiechanel]

yo you ripe that 110cc better than me on a 250!! respect!

[@whoknows811]

Been looking for this product

[@saltysealion]

Cameron, with the toliet paper shortage,,,, YOURE ONTO SOMETHING.

[@UlisesGlez26]

Sick product, I'm happy your toilet will stay shiny hahaha

[@GeoMan1217]

Things I've learn about you from your videos, you don't have a squeaky thing you own and you can't stand dirty.

[@sebfullick5011]

I'd like to see the finish after a couple weeks and few washes later. Would be stunned if this stuff actually lasts

[@lorollinls]

Trim coat looks good enough to give it a go on the cars and bikes. I’m not easily sold on products via KZbin, but I trust your judgement and rigorous testing lol. Thanks for the recommendation!

[@rundowngarage935]

This is some damn good content

[@kylebrackett2543]

Bro you should do a crf150r build. That bike hasn't really been build much.

[@maverick7484]

amazing inspiration video bro dont stop do this things yeah

[@spiffyvidz5898]

it probably feels so good to be riding again, no matter if its a pitbike or not

[@samiam5557]

WOW! The 'shit' actually works.....AMAZING!

[@sketchyindustrys4188]

You should try ceramic coating dirtbike plastics

[@TR-zn4pw]

Man i wanna ride that pitbike track. U should take a picture from a drone or something cause i wanna replicate it haha

[@Samuellalexandre]

Hi Cameron Can you make a video dyeing a gas tank from white to black? Thank you

[@davidgreen7342]

And blue to black

[@MJMAC]

Meguiars trim detailer works well also. Been using it on my cr250 and cars for years

[@stansabick2700]

Hit up the trim on your Subi...

[@starstencahl8985]

"I'm not healed up enough to ride a full sized bike" Proceeds to rip the 110 harder then I ever could with a big bike 😂

[@mxrider2strokebraaap54]

Nice product 👌😄 Great vid!

[@gooklogander7]

I got a Pacific northwest Cerakote ad at 12:10 😂😂😂

[@Cody-yx1kt]

Great video, and info!

[@bloodmonk125]

Definitely seems best on black plastic but I don’t think that’s anything against the product. Just an inherent thing with black plastic. Is there anything you’d suggest doing with plastics that seem to have like “spiderwebbing” on the surface. It’s still strong just looks like it’s got cracks all over it.

[@lucasguzik1936]

Let’s see some superjet vids!!

[@kurtchristopherararao5068]

this helps a lot ! thankee ! now where can i order this hehehe

[@vinski240]

When you are coming to Finland?

[@marekhorky9273]

Hello, I would like to ask if the product also works on colored plastics. Thank you

[@jarenague]

It's looks really good but that is the last part, first step would be, how to repair a plastic gas tank that have one hole leakey? : )

[@joshuahutton3997]

Hi Cameron, what would you suggest to clean/shine my 2005 RM125 disc brakes? One of those abrasive pads perhaps?

[@hurikanne]

Very interesting. Have you had any problems with the threading (small metal parts) of the tank plastics? Do you think if it is possible to remove them to redo the thread with helicoil or new? Keep us dreaming with content like that! Best regards

[@CameronNiemela]

Thanks for watching! Yes, it is possible to heli coil those inserts

[@hurikanne]

Thank you for the answer. It’s always a pleasure. Do you think I can remove them with some heat or I can do directly on the fuel tank? Best regards

[@yeeyeeyeebo3210]

You should do a pit bike build

[@Mrgoldliger]

Try to put it on the sidewalls of tires and see how it holds up

[@gavint.1558]

Next up, how to cerakote a tabletop

[@Danger_Mouse3619]

Use a heat gun or hair dryer on the plastic. The heat will eventually bring out the oils in the plastic to come out and you will see it come back to how it was.

[@cappe_yt9182]

Cerakote looks great but the price is steep, I can buy some siliconspray for 10dollars or less and use a rag for the same effect, might not last as good but is way cheaper

[@dirtbikedave]

Hahaa! Go figure. Definitely not why I came, but I am actually just about to restore my basement toilet.

[@muckcrafukhd9493]

More riding stuff🤙

[@austin_7886]

Will this work on a see through gas tank that’s faded

[@billnye198]

Looks like armorall does before drying up and ruining plastics. lol

[@fishywishyfishfisk]

Does the blowtorch technique work with colored plastic? I've got a pretty decent scratch on my rieju whoch has made the red plastic whiteish

[@connorvanhill6367]

Does this only work on black or can I do it on other colors and will it hurt graphics if I put it on them

[@EXTREMENESSBMXMOTOCROSS223]

When r u gonna do a Riding video on the cr 250

[@andrewwest1032]

When’s the riding video!!!!! 😂😂

[@The77Game]

Seems to do a great job. I would love to try it on the unpainted plastic parts on my motorcycle scooter but it would seem that it is not available in europe. And if i have to get it from USA then the price will be tripled.

[@seolennkha6120]

I restored my unpainted bumper on my car with a heat gun, works wonderfully

[@THEDUKELOVER]

how often does it have to be applied

[@dunerinaz]

I wonder how that stuff would do with RZR fender flares. They fade pretty quick and turn grey instead of black.

[@CameronNiemela]

Would work great! I've seen it last for months on something like that

[@finnrosewarne2101]

What about the coating on dirt bike boots

[@factoryminis3437]

SC1 works so good, it's like cheating. Not sure how many months it lasts, but it so easy to keep it fresh. You can make glossy or satin. I keep at least 3 cans of it all the time.

[@smallenginekid6252]

Sc1 is garbage

[@adventureswithtom8516]

Now why does Cam have an RM250 number plate huh??? ; )

[@legoandrcman8615]

hey, @cameronniemela what happens if you use this over top of graphics and decals?

[@SuperLaplander]

Nice product, too bad it seems they dont sell it in Sweden.

[@abdelkaderammari]

جيد انت مبدع

[@rushzimi3865]

Ok... we were doing fine up until the loo... would've simply taken your word for it. 🚽💩🧻😄

[@straightgoonin2308]

Just made my first turn track riding my first 250 that sat for 10 years. I got it running by watching your vids. You teach me so much and inspire me to get out there and get my hands dirty.! If you want check out my turn track on my page !:))

[@free-birdrocker8809]

Cool...

[@NoahGrandry]

Poahh! DIKKE JOHN DEERE!

[@nicholasott6268]

thanks Cameron this video will help me soooooo much!!#Camstrong#primemx

[@RY4NP]

Noisey tappets? Mine's the same

[@radsdad1]

How about treating your goggles or windshield?

[@CameronNiemela]

I believe it would be streaky on glass

[@AbcAbc-ox6pg]

What kind of devil stuff is that? Just used that, plastic looks fantastic but that stuff smells like hell, really bites my nose and I still had a cough 3 days later. That must be harmful to health. Just don't understand that there's nothing about it on the packaging?

[@eskieman3948]

Wahhh.

[@jakegarvens59]

Old coolant hoses?

[@CameronNiemela]

It'd work on those too!

[@tr1pp3r88]

“lawnmower dont care” - cameron

[@conner7095]

WD-40 worked for me too, no kidding.

[@DieKosten]

O algún producto parecido que se venda en España?

[@DieKosten]

Cómo se puede conseguir en España?

[@MiguelHernandez-qo2vz]

the video rlly changed directions at the end

[@kellywiley9007]

Lol...

[@k.snyder_812]

Yz250?🤔🤔🤔🤔🤔🤔🤔

[@danielgrantcoleman]

Omg. Please don’t cerakote your crack together. Lmao.

[@danielgrantcoleman]

Although if you do. Make sure to wash thoroughly with dawn and let it dry in the sun hahaha

[@BanjoSkrrt]

2nd i think

[@pedrofernando176]

🖒🇧🇷

[@flyinciv9523]

Y does it look so much like a condom😂

[@candyclone]

Hi :) 1st hahahaha

[@micah-hooka7275]

Don’t sand it….those stains on the old RM front number plate would effortlessly come off by using a couple Mr. Clean Erasers. Nothing works better. My 1989 CR80 was a roached basket case. All my plastics (which aren’t produced by Honda or aftermarket) came out looking brand new. I did a full nut n bolt restoration on it and it’s like the new 1989 dream bike I couldn’t stop looking at as an 11 year old at my local Honda dealership.