i always loved the smell of the nitro as a kid & i still do
@garagebuilds10 ай бұрын
Nitro is the glory!
@O.B.C.DАй бұрын
Underrated comment
@Crabtronics Жыл бұрын
Dang bro I didn’t even realize this was your channel at first. Hell yeah dude your going after it. 💪🏼 already know more about nitro than I do 😂
@garagebuilds Жыл бұрын
haha yea bro i actually started with the pull start my first time club race lol with the kyosho rtr
@x5ilco Жыл бұрын
Just got my first RC and she fast, but soon my hobby expert said he's gonna bring out a nitro to try
@garagebuilds Жыл бұрын
Niceee! welcome to the hobby m8! you will like both the nitro is veryfun and different clutches engaging rpms and all the above!
@JosephKreinen-nr8ml11 ай бұрын
Thank you for telling me this I’m only 12 it’s been so many years since my my dads nitro car as rain ever he was 16 and now it’s mine and working❤❤❤❤
@TheInvisibleOrange26 Жыл бұрын
Make sure to adjust idle your wheels should not be spinning and engine should be constant not shut off
@aref1087 Жыл бұрын
My motor is 20 years old i was thinking its done but then i warm it up With the hair dryer and it works😂
@garagebuilds Жыл бұрын
hey if it works it works ! send it! 🏎🏁
@go_play_with_sticks11 ай бұрын
im rebuilding one from 1982 wish me luck!
@Motorhead0010 ай бұрын
@@go_play_with_sticksany progress so far?
@go_play_with_sticks10 ай бұрын
@@Motorhead00not really I cant figure out how to get the piston sleeve out and I cant buy another because the company is out of business.
@garagebuilds10 ай бұрын
@go_play_with_sticks you can put a zip tire tru the exhaust outlet while the piston is down , then turn the crank it wil push up the sleeve
@islandrc-duke19722 жыл бұрын
awesome
@bella01672 ай бұрын
👍
@yllirexhaj49434 ай бұрын
Sophisticaton
@S0u1__217 Жыл бұрын
Which starter box do u have?
@garagebuilds Жыл бұрын
dynamite
@rajgill75762 ай бұрын
My hpi savage big block doesnt have the exposed flywheel underneath ):
@garagebuilds2 ай бұрын
would have been cool if they had it . But cant beat a pull start ready to go anywere and bash!
@TheHoodVoice20242 ай бұрын
-1st you gonna fill it up with fuel 👀 THANK YOU I ALWAYS FORGET THAT PART
@andilemaa13 күн бұрын
What nitro fuel are you using ?
@garagebuilds12 күн бұрын
30% from local hobbyshop
@simplegr33n4204 ай бұрын
Is that a track star in a kyosho race kit?
@garagebuilds4 ай бұрын
Yes was definetly a great motor to learn how to race very cheap ripper lol
@simplegr33n4204 ай бұрын
@@garagebuilds yeah I’ve heard good things. I run a dynamite .21 in my 8x, it’s a solid engine and good for experimenting with port modifications
@garagebuilds4 ай бұрын
Nicee cant go wrong with that always awesome to experiment and see what works and what not good luck with the porting hope u can get some horses out of it
@davidmccartan2708 Жыл бұрын
Is it the same principle with a brand new nitro car?
@garagebuilds Жыл бұрын
yes. same 🏎🏁
@johnbravo7542 Жыл бұрын
Even more so,brand new nitro is super tight,that is what gives you the compression,he didn't say in the video to make sure your piston is at BDC bottom dead center
@kylemills3356 Жыл бұрын
Is that car a caster?
@garagebuilds Жыл бұрын
caster? kyosho mp10
@2strokercworks Жыл бұрын
Is that a mp9 tki4 or mp10 tki4
@garagebuilds Жыл бұрын
Mp10 tki2
@king_sentry10 ай бұрын
Cool channel!! I juat dont how they work getting one soon! What rc car nitro do you reccomend that runs roughly 1 hour i dpnt care about the gas price.. hehe just below 500$ or som. Pls
@king_sentry10 ай бұрын
Byw are nitro rc waterproof?
@garagebuilds10 ай бұрын
Thanks m8! there is no reason why you would run a nitro for over 1 hr nonstop unless you having a pro/expert Amain . i think about 20 min of play time at a time is great which is about 3 tanks at a time usually nitro motor at 1 tank they will run from 6-9 min per tank depending on your tune . and no they are not water proof maybe splash proof but you dont want water touching your engine or filter because it will damage it , for a starter i would recomend a kyosho neo 3.0 or a losi eight rtr which will be ready out the box other than having to do a break in
@Harvz78Ай бұрын
What servo do you have?
@garagebuildsАй бұрын
Zoom rc 540 high torque servo
@michaelinzitari7 ай бұрын
Prime first otherwise you will burn your hand. If that preheat was real you wouldn’t be touching the head like that
@SourPatchPuss Жыл бұрын
Jesus, electric seems so much easier 😂 but not as cool no doubt
@garagebuilds Жыл бұрын
i agree i do like plug n play but nitro i love it cnt beat wrenching all the time different types of clutches motors fuel its amazing #NitroPowa