Your Nitro RC Car Won't Start What Do You Do? 2024 Version

Some very basic info on what you can do if your Nitro engine won't start.
Want to send me something? (If you're in Britain please use Royal Mail as ParcelForce keep messing up!)
My PO BOX:
Haggard RC
PO Box 1976
STANFORD-LE-HOPE
SS17 1BS
My Amazon Wish List www.amazon.co.uk/hz/wishlist/...
Join this channel to get access to perks:
/ @haggardrc
You can help me make better content by donating Via PayPal as a gift to [e-mail]!
Or you can use this link: paypal.me/RustySkull
Every penny that is donated will go into making good quality videos for all my loyal subscribers!
Many thanks to you all :)
#Nitrohelp #NitroRC #RCCars

[@Jagparts2023]

Just love the Haggard RC channel, raw, real and down to earth, I would advise anyone new to the hobby to follow the Haggard channel, no hype, no bullshit , just plain simple down to earth advise from a bloke with 20 years experiance of RC. Please keep the channel going as it is, a great help to many people out there including myself.

[@downunderdan5132]

Most valuable technique for starting (for me), before I start pulling away is to prime fuel, plug in igniter and slowly pull through compression. If all is well, it should kick back (combustion!). That means you’ve got air, fuel and glow. Good to go! If it doesn’t kick back, you can start diagnostics without getting a sore elbow. I’ve used old fuel (stored correctly), old glow plugs, all good. Usually the cause of a non start is something more simple than needing fresh fuel or a new glow plug. Engine heaters I’ve found useful but really only for break ins. I live in Australia 🇦🇺 though. Stay persistent guys! Nitro is its own reward. There’s also some great tuning flowcharts on RC Forums. Keep up the good work man. You’ve got a laid back way of discussing. 😎

[@stevenwindmeijer6556]

Haha bro the way you most of the time say " hello you lot" cracks me up! Keep it up!

[@HaggardRC]

😂😂

[@AlfieFury]

Hi haggard, I don’t comment on videos normally, but after watching the first 13mins of this video . I understand this is just your personal opinion or experience but if you’re trying to help out people new to nitro, I would definitely need to disagree with some of what you said. Nitro engines do not need to be preheated to be started and it defo doesn’t need to be above 15c or 20c degrees outside to start it without a heater. Also the factory setting on RTR cars in my experience are 9/10 are fine. This is the problem with new people trying to start nitro engines for the first time, they start messing with the setting and most of the time it’s not the setting that are the problem it’s something silly. And for someone new to rc messing with the setting they most likely don’t understand what they are doing. Example like the Ftx that you was given, this was a perfect example of someone new to nitro and they messed with the settings and made the problem. Also I don’t think it’s good that you mentioned easy start or using other flammable liquid to start it, they just need nitro fuel. Also nitro fuel it does go off and that could make it harder to start nitro engines, you should be telling people to use fresh fuel. And definitely if you’re trying to help out new people to rc. Not saying you can’t use old fuel but I’d would not recommend it. This is just my opinion and experience.

[@HaggardRC]

Nice to have your input Alfie, I think an experiment is in need don’t you? Old fuel against new fuel 😁 up for it?

[@Chris-HC]

Brilliant mate nice one. You got a shout out from Crazy Dad Nitro. He's Deleted his account bar one video 😢 stay blessed and play nice folks 👊

[@Leon-qz5lk]

When I'm stuck I go back to my engineering and mechanics from collage .When i first started nitro my RS4 evo3 didn't have the line from exhaust to fuel tank but did still run but not well and was pain to start unless it had alittle throttle.only other thing to cover would be that dreaded word a tune but there a few of ur videos they can watch for that. Great video again Haggard

[@johnhewitt6959]

Good video haggard I was exactly the same when I first started 15 to 20 years ago with nitro so put it back in the box and put it away luckily I met somebody who was into nitro and thay got it running for me and he shown and told me the basics the more newbies in the hobby the better good for stress or feeling down having a bad day go out with your nitro u forget everything and come back feeling good

[@rickgrafter]

il give you a tip take glow plug out when piston at bottom mark the crank then prime from that point will start easy

[@bobdude2360]

Great video btw. I got to say you made a lot of good points and I must admit I agree with you on the fact that nitro doesn't go bad.But it can if moisture gets introduced or if it separates and people have to remember that nitro fuel is in fact hydroscopic which means it can draw in moisture if not stored properly. So just to let new nitro folks know he is right if stored properly nitro should and could potentially last almost forever. Also like he said a lot of things in nitro come to those with patience and common sense or somewhat have a little bit of mechanical back round or knowledge of engines to say whether or not they know what they are doing. With that said keep up the good work haggard and keep burning nitro and having fun with it my rc friend across the pond your rc friend from the USA. Take care brother and God bless you and your family. ✌️ Be with you.

[@MrGrunter0]

Like most of your videos, this is another clear and descriptive one. I always find your videos informative. I don't have nito yet, only electric, but i am very keen to get into them. Ive also found from your videos some half decent running spots as im local to them. Keep up the good vids mate.

[@MR.B.1620]

I've got a little rh1006 buggy I'm going to run through these things with! I feel it could be more serious like that bearing by the flywheel but, this will eliminate other possibilities. Thanks again!!

[@s.o.sSavage]

Great idea to help people out man👍

[@fltltspike232]

Well said. As long as a smile is on your face, you’re doing it right.

[@IBurrows2112]

Cheers for this video, I've learned much from watching your videos, I do currently have a GP12 engine that is currently defying all laws of physics and I'm yet to figure the issue out!

[@alexgarrod9093]

Thanks bud very helpful

[@alexgarrod9093]

Appreciate that bud helpful

[@jayp9299]

Great video!

[@Javiii1312]

Thank you for the good info, mate. I have that issue with my sportswerks turmoil buggy it has a .21 I had to by pass the Carburetor due to it not staying running, it start and than die out, so I definitely knew it was a blockage in there, right now I am working on taking the Carburetor apart but won't probably be until Saturday, good videos man, Always a pleasure to watch. 👍

[@CrazyDad226]

How's it? Nice educational video to help some hobbiest out. 😊👍always yes sir. Much love from Crazy Dad in TN wooo. Keep up the. Great content. 🔥💪🤘😎

[@aimlockersesp7680]

Hi and hope you doin great. Can you show us how to repinch a sleeve but homemade not with tools

[@benstantay]

Give it to Ben seems to be popular

[@plewsford]

I've got some fuel that's 3 years old, gave it a good shake to mix it back up in case anything in it had settled and my engine ran on it no issues.

[@HaggardRC]

Great! I don’t talk rubbish all the time😁

[@plewsford]

@HaggardRC Not at all! Lol. Your Rovan Q short arse and the filters, have you managed to find a good one? I've got the Rovan AS1 and use the stock one, too. I bought an outer wear, but they're fiddly to put on, so threw it in the bin.

[@andrewpilkington2873]

Hi Mate, I’ve been watching the posts for a while now and glad to support the channel as it has been really helpful and an inspiration. Hoping you can help me out a little further, I got my TT EB4 S2.5 running pretty sweet after 11 years under the bed, however I have shredded the main gear not appreciating the torque the .21 Pro puts out when tuning (MY FAULT). Should I just replace with the OEM plastic 46T gear or fork out for a steel replacement? Appreciate your advice on this as I see you are running a similar setup with the OEM main gear (AD0363 46T EB RG) in this vid. Keep the vids coming! Andrew

[@HaggardRC]

Hello, always get the metal one if you can, it’s worth it because it should never strip 🤘🏻👊🏻

[@lewissmith6666]

They are the most popular thunder tiger nitro rc cars

[@fcbaker65]

I ran my motorcycle 300 miles off of 10 year old gasoline with out issues! My dad was pissed because I didnt plug the line when I got it out of the tank an it leaked out all over the garage floor ,the garage smelled bad for months after that ,it smelled like turpentine!..🤣😂

[@katychilcott9076]

any chance you could set my car like yours you set them up so fast

[@katychilcott9076]

i watched ever you tube video about rc and your the best about working on these anychance if i posted mine too you .could you set all mine up for me thanks

[@speckledjim_]

Did you call burn rooms gay ha ha ha 😂 made me laugh

[@HaggardRC]

😂😂 someone will be offended and won’t realise the British humour… you watch lol.

[@Flexiblood]

hey mate can you ring them engine heaters on 4s batterys?

[@HaggardRC]

Don’t think so I’d stick to 3s

[@bricko9821]

No bro looking to get it fixed the engine needs tuning and stuff and the part I'm looking is discontinued as far as I'm aware

[@HaggardRC]

What car is it and what part do you need?

[@bricko9821]

Kyosho pureten nitro has a rare 2 speed in it but the spur gear is on its wa out

[@bricko9821]

Hi haggard ive a kyosho nitro with a rare 2 speed needs looked at think u can fix it 😂

[@HaggardRC]

Haha funny man I can’t mend anything

[@bricko9821]

Lost all intrest in it no fuel getting to it needs a service 😂

[@HaggardRC]

You wanna sell it you mean?

[@bricko9821]

What's ur email bro

[@Drc709]

How do you break in a new nitro rc car

[@HaggardRC]

2 tanks on tick over, two tanks driving around in a circle at no more than half throttle, then 2 tanks going to full for a few seconds. Job done :)

[@Drc709]

Thank you

[@Drc709]

Tick over is at idle right

[@bobcowley3849]

Ive never heard so much rubbish in my life! All i would say to people out there if you want hassle free nitro starting get help from somebody who really knows what they talking about. Ive been using nitro rc cars for over 40 years and never had a problem. You’re not giving your viewers the correct information. Dont take my word for it just go to your local rc shop and show them this video. Im sure they will have someone who knows what they taking about there.!!

[@stormphillips4316]

Buddy hobby shop guys usually have no idea wtf they are talking about

[@bobcowley3849]

Ok if you think all model shops don’t know wtf they talking about go to a club ect ect. Shops have close ties with manufacturers granted some people who work at model shops don’t know there time of day. Look at it this way you buy new car! It goes wrong in first week who you take it too? Now I’ve spoke to much already. But if you new guys and girls are new to the hobby of nitro rc and your having problems first port of call I would say is back to the shop. If they cannot get it running right well your in a world of pain and I feel for you like I say I been using nitro cars, and helis for of over 40 years mainly cars helis last 25 years or so take it for what it is.

[@desmondtaylor5778]

All rubbish put it in the trash