How to EASILY Wire a B5 S4 for manual! B5 S4 Manual Swap Part: 7

[@JakeB5]

Sorry for the wait! Got a bunch of new camera gear and still figuring out how to use them efficiently, but we are now in 4k! If you guys have any questions about wiring, leave them here! Hope you enjoy the video!

[@MrAlf24]

You're doing great man keep it up. Lots of help and great content!!

[@viggenz24]

Content is getting better and better. Nice work.

[@sreed_]

Cool visualization of this process, this should be super similar for my S6 swap

[@lasseaudi]

incredibly good job, I'm going to rebuild my audi a4 b5 2.8 triptronic now to 2.7 biturbo and 01e gearbox and rear diff 411 exchange 🙂

[@thebasspro]

hey dude quick question dude i have done my swap and was looking through the wiring and the s4 wiki and some others all mention disconnecting the brown 15 pin connector passenger a pillar "Disconnect Brown 15 pin plug in right lower a-pillar, this connects the CAN bus and K-line to TCU" my car has 2 brown 15 pins in there i cant find anywhere specifying what connector is what

[@elvisjohn3]

Excellent video. Any ECU flashing needed for the tip to 6 speed swap ?

[@JakeB5]

There is, and you can do all of that using VCDS without having to send it out to someone

[@captnpsycho8231]

My reverse sensor was not the same plug as you it seems, mine is more the 2 pin 02 Sensor style plug, not the smaller metal clip plug you typically see on injectors.

[@vusimadela6271]

I'm still struggling with my A4 b5 V6 2.4 is revving up and when I stop. It started when swap from automatic to manual . Please assist 🙏

[@joserivera7694]

Hey Jake the reverse plug on the tranny, why do you have to buy a new one, can you use that same one that's already plug in?

[@christiancarrea1961]

Why did you need to pull out tcu

[@Krankenwagen2010]

Hey bud how did you wired the wires for the speedometer to get it to work?

[@bjarnejack3470]

Do you Think it is the same witing on a a6 2.7bt 2002 modl?

[@markcrandall2758]

What part of the US are you located? I’m currently in the process of installing the pedals and need some serious help with wiring!

[@markcrandall2758]

Oh and my other concern is I have an rs4 manual transmission

[@MrAlf24]

Hey I have an '04 allroad that i want to manual swap. Same shit right?

[@rickyracer31]

Hey after I remove the tcu, I would like to remove the whole wiring harness also. Can just chase and remove? Can I cut the terminal off under the carpet with no worries?

[@joserivera7694]

X2

[@FreeePalestine1948]

Just bought a 2001 Audi S4 but needs a new engine do you recommend the 2.7 or swap it with a 4.2?

[@JakeB5]

Honestly, I would stick with the 2.7t, you can make a lot more power a lot more easier than the 4.2, but the 4.2 is pretty unique and pretty cool.

[@jerryreid813]

I have been considering this swap for a while. Do you know what transmissions are compatible for it? I know that that B5 S4 manual is an automatic match but I read somewhere that the B6 S4 manual transmission is compatible. Do you know if this is true or not?

[@ralstonnajarro5761]

You can pull out of an all road as well I believe

[@jerryreid813]

@@ralstonnajarro5761 Thanks.

[@misschellefromhell]

@@ralstonnajarro5761 Allroad 01E uses 4.375:1 rear diff. Incompatible with B5 S4 Manual diff (4.11) and B5 S4 Auto diff (3.89). 0A3 transmission from B6/B7 S4 can be made to work, and will mate with B5 S4 Auto rear diff (3.89). 0A3 is also longer than 01E, so it will only need a small spacer to fit the B5 S4 Automatic center driveshaft.

[@gamersprofile610]

YOUR SO GOOD AT EDITING BUT THAT TAG AT THE BEGINNING NEEDS TO BE THE SIZE OF YOUR FACE. BUT DONT COVER-UP THAT CUTENESS!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@ryanwatkins9801]

Your drunk 😂