Milo explains the use of a pressure pot to create castings which are completely bubble-free!
@lasarith23 жыл бұрын
So … better to air on the side of caution…
@imaginationworkshopstudio4 күн бұрын
The sculpture or Relief is called Creation by Michelangelo Buonoroti
@smoothon4 күн бұрын
Please contact Smooth-On technical support for assistance with your inquiry.
@MileyonDisney3 жыл бұрын
I L-O-V-E Smooth-On products! I've used plenty of them. One I haven't used, but would love to own, is that on-its-side pressure pot. Too bad I can't afford it right now. Some day!
@erik_riv3 жыл бұрын
Thank you very much for the tip Master Milo! 👌
@smoothon3 жыл бұрын
Thank you for watching!
@marcussoderstedt3 жыл бұрын
Amazing as always Milo, great step by step tutorial!
@smoothon3 жыл бұрын
Thank you for watching! Don't forget to subscribe!
@lazyho22693 жыл бұрын
Smooth-On Master Milo.
@baruchspinoza49793 жыл бұрын
Smooth-On sells a product called Aquacon. For molds that are too bulky for a pressure chamber, would rinsing the silicone mold with a coating of Aquacon before pouring in the gypsum system be of significant help?
@awesomearizona-dino3 жыл бұрын
Thanks, i can use this info in my moldmaking.
@smoothon3 жыл бұрын
Thank you for watching! Don't forget to subscribe!
@j.danaclark893 жыл бұрын
That flashing light in the left of the shot during the beginning of the video look like a flux capacitor.
@allaze-eroler3 жыл бұрын
it is the case, they mentioned that in their previous videos if i recall correctly
@DeniseLeegreenjuicemystic Жыл бұрын
I purchased this same model from your location. Can you make a video showing me how to mount and level the pot in both ways please. Thank you I cannot find anyone to help me.
@smoothon Жыл бұрын
This is a great idea! We will forward it to our video team. In the mean time, can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/
@SlabbinNCabbin2 жыл бұрын
Can you disconnect the air pump, and still leave the pressure in the pot? For longer cure times, like four hours..
@smoothon2 жыл бұрын
You will want to keep the pump attached, in case there are slight leaks in the hose or fittings.
@mohammedalhirz862 жыл бұрын
Does the prssure pots can be used for the silicone to reduce the bubbles ?
@smoothon2 жыл бұрын
You can pressure mold, but care needs to be taken to ensure that distortion does not occur.
@The_NASA_GUY3 жыл бұрын
Is the mixture a substitute to plaster of Paris?
@smoothon3 жыл бұрын
This is a much stronger material than plaster of paris.
@Daall-kw7hm Жыл бұрын
When I use the blender there are a loooot of bubbles even if I put them in the mold and vibrate it they never end , any solution for this problem 😢
@smoothon Жыл бұрын
Can you send us a tech ticket? Our team can help you - www.smooth-on.com/support/ticket/add/agree/