How to embroider on a t-shirt

In this video I show you how to embroider directly on a t-shirt using the brother se600 sewing and embroidering machine. If you haven't purchased your se600 yet then use my amazon affiliate link below to purchase you embroidery machine today. Don't forget to visit www.allanawade.com and get some awesome embroidery designs to stitch out onto anything you wish.
Heat Transfer Warehouse www.heattransferwarehouse.com?aff=62
Brother SE600 Sewing and Embroidery Machine amzn.to/2EYEya0
Sprayway Spray Adhesiveamzn.to/2WRF2a2
Brother PE800 amzn.to/2GaieKE
Spool savers amzn.to/3eO5Wrv
Embroidery scissors amzn.to/3cLqlLZ
Fray Check amzn.to/3bEh9sK
Simthread Brother 40 Color Thread amzn.to/2zuXHk0
Tear away Stabilizer 6x6 amzn.to/3eMfinE
4x4 embroidery Hoop amzn.to/2yGcRCw
Shop A-Dubb Productions Channel Merchandise Store
❤️👉🏾allanawade.com/
For Contributions send to:
Paypal [e-mail]
Cash app $adubbproductions
Venmo @kingallanalexanderwade
For collaborations and business inquiries, please email me: [e-mail]
****************************************************************************************
Visit my AMAZON INFLUENCER PAGE where all the gear I talk about and use lives.
👉🏾www.amazon.com/shop/allanwade
Home Depot affiliate link 👉🏾homedepot.sjv.io/N3bXV
AMAZON LINKS
Shop on Amazon using my affiliate links
Silhouette Cameo 4 amzn.to/38pwo6L
Digital Heat Press 15 x 15 amzn.to/2EqjiZK
Brother SE600 Sewing and Embroidery Machine amzn.to/2EYEya0
Brother PE800 amzn.to/2GaieKE
Spool savers amzn.to/3eO5Wrv
Embroidery scissors amzn.to/3cLqlLZ
Fray Check amzn.to/3bEh9sK
Simthread Brother 40 Color Thread amzn.to/2zuXHk0
Tear away Stabilizer 6x6 amzn.to/3eMfinE
4x4 embroidery Hoop amzn.to/2yGcRCw
PANASONIC GH5 amzn.to/2QzE8u7
Rode VideoMic Pro Plus amzn.to/2HaPsvc
Rode VideoMicro amzn.to/2SC358A
RODE VIDEO MIC PRO amzn.to/2hNMyfU
GoPro Hero 8 Black amzn.to/2REitDd
SONY-FDR X3000 amzn.to/2hNRZf3
JOBY GORILLA POD amzn.to/2Et83zq
FOTODIOX GREENSCREEN amzn.to/2roav7m
IKAN iLED6 amzn.to/2DiiZyp
Dji Mavic Mini amzn.to/2ttqNh8
Delkin TRIPLE Fat Gecko Three-Arm Suction Mount amzn.to/2GyKbLh
Fat Gecko Camera and Camcorder Mount amzn.to/2GANvWm
****************************************************************************************
DON'T FORGET TO SUBSCRIBE.
🔑Subscribe to my other youtube channel
Allan Wade 👉🏾 / @allanwade
🔑Like my Facebook Business page
👉🏾 pg/adubbprod...
🔑Follow me on instagram
👉🏾 / kingallanalexander
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Also check out my business website
If you want tips and tricks and suggestions on how to make your next production better click the link below.
adubbproductions.com
#embroidery #embroiderymachine #Embroideringonashirt

[@360baller2]

This channel literally help launch my business 💪🏾💪🏾💪🏾💪🏾💪🏾

[@adubbproductions]

That’s dope to hear that I could be a part of that. Congrats on your business, i wish you much success.

[@REAPER_REMY187]

What's the name of the business

[@kadircrawford2589]

Same here mor elide yo you

[@onezshul]

How’s it going

[@TheRealMose]

Thats dope bro frfr

[@kristyvailencour6456]

Just thought I would give you a tip. When changing your thread color. Don't pull the thread up cut it at the roll and pull through. Keeps the fibers from messing your machine up over time

[@adubbproductions]

Good tip. You aren’t the first person to tell me that. It makes sense. Thank you.

[@SarahJareth]

That makes so much more sense

[@bibsbeezASMR]

What you mean cut it at roll and pull through etc? :( doesn’t the machine has the pulling thing on the side where it cuts the thread for you?

[@adubbproductions]

It does make sense and the manufactures recommend it but to this day I don’t do it. I always appreciate someone telling me to do it the correct way but I still do it the way I did it in the video. Saves thread and it doesn’t harm the machine as long as you raise the foot which releases the tension.

[@mrquez7351]

Can someone please explain what dude means exactly by “ Cutting it at the roll” etc?? I get that you don’t do it, but I’m still curious what the heck that statement even means lol

[@letitiahenry6113]

Thanks. I was wanting to embroider T-shirt’s with my son. I found you on here other day! I love this.

[@sandrariggins5504]

You did an excellent job with your patience and explaining as you go. Who would have ever thought of using material as stabilizer. Genius! Thank you

[@annevenier5568]

I just bought my SE600 and your videos are a life saver. Whenever I'm not sure what to do I look for one of your tutorials. You are awesome. Thank you so much.

[@Godsownsunshine8]

Well on some clothes with patches that's been sown on, You can see the material behind it

[@joseh9031]

Bought the machine 1 hour ago before finding your channel.. just cancelled and re ordered it using your affiliate link, hope it helps bro.

[@katie-xr6un]

how much is it?

[@katie-xr6un]

@@joseh9031 tysm can you semd a link please

[@joseh9031]

@@katie-xr6un the link i gave you is his affiliate link so he can get credit :)

[@westscott1885]

It was sold out on Amazon I was able to find it in swing design website got it delivered in 3 days

[@adubbproductions]

I appreciate that so much. You didn’t have to go threw all that but i do really appreciate that. Thank you Jose. 🙏🏾 God bless

[@martamisotti9074]

You are seriously amazing! One of the best step by steps I’ve ever watched. Everyone else bores me and then I end up confused. Thank you a million times! 😊

[@nataliehafford2553]

I've made embroideries for gifts while working for the White House in DC and your work is comparable to the 12 head machine I used. love it

[@deborahscinta6539]

I would like to see how you create a design on the software

[@adubbproductions]

Deborah Scinta Its coming. How to create a simple design with pe design 10. Maybe I’ll make it tomorrow.

[@davidjlenovich4266]

Let’s goo. Been looking for a video about how to make designs

[@Malcolmxxi]

Same I need to know how to use the design software

[@piromero2247]

@@adubbproductions 🙏🙏

[@rosalindsmall7622]

A-Dubb Productions Allan Wade in a press TV

[@lorennunley]

Thank you for this, I bought the SE600, a vinyl plotter and heat press so we can make our own garments for our other business but after watching your video. I think I’m going to work on making this another business in itself. Keep the videos coming, great work.

[@dotren1tx933]

Thanks so much for these videos. I just picked up the SE600 and it's a big change from my old standard machine :) Your videos make it easy to understand :)

[@ruthgarvin5900]

The easiest and best explanation I have watched. Just purchased an embroidery machine. I am looking forward to watching more of your videos.

[@josmos353]

Thank you sooo much for making this video. I followed it and my very first project was such a success!

[@albertaj2472]

You did a beautiful job young man a beautiful job you really did. I'm glad you chose to demonstrate how it's done.

[@janyvesdeshazier4292]

Thank God I've found this video, because I have the same sewing machine and tried to do embroidery then the needle broke and lost interest for about 8 months but always wanted to finish it and learn more about the machine I was even going to hire a personal tutor for $200 dollars while this video was playing but then I noticed that the machine looked like mines then noticed that it was my same exact model Brother SE600. There's no video that explains this machine like you. Thanks you saved me money that I can invest in you instead because you know alot about this craft. Thanks👍

[@LizA-zu7ps]

2 Years late but nice and keeping it real and informative.

[@leeleeisme4279]

I'm on a Brother Se625 looks exact like your machine. This video has answered a lot of my questions. Thank you!

[@David_Flournoy]

Best demonstration ever. Keep it up Allen. Thank you for an excellent explanation of all the steps

[@franchastermcwilliams3611]

So glad I found this channel I purchased the sawgrass 500 and an embroidery machine

[@adubbproductions]

Well i'm glad you found this channel also. Welcome, and I hope you make lots of of extra income with your new tools. I actually love my sawgrass. Im sure you will too as well as the embroidery machine.

[@Scrap3001]

I know this is an old video for you but this is where I am right now. Just what I needed. Maybe in 2 years I’ll be where you are today!!!

[@adubbproductions]

🙏🏾. Glad to help. You can do it easy and in less time.

[@derrinthompson2890]

This is so mesmerizing I can’t wait to get to point of being able to do the box patch so solid like that.

[@ellelatorre2893]

You did great. Thank you so much for this video. I now am confident in embroidering not only on t-shirts but on some stretch fabrics.

[@adubbproductions]

Thanks fro watching. I appreciate it.

[@DaMuscleB4K]

I have this same machine for over 3 months still in the box, thank you for claiming my fears I'm going to take it out and try!

[@papapiet6921]

Best video bro. Please make videos where you were learning and show us those mistakes (tensioning wrong, hoop too lose. Just for us to see the end results. And keep commenting while working that's the best. 👍🏾👍🏾👍🏾

[@deewashington2520]

Your instructions, commentary and video is simply dope! Thanks for sharing

[@ashleygirt5013]

Thank you so much for making these videos! I'm brand new to embroidery but have been wanting to get into it for a while. You convinced me to purchase the Brother se600 and thanks to your link I saved over $400!! In addition to that, your videos are so helpful and easy to follow, greatly appreciated!

[@yazmynebright5892]

If you don't mind me asking around how much did you pay for it because I found one on fb marketplace for sale so I'm comparing prices.

[@Blkbeautee]

I bought a Brother SE625 and this is the first video I have watched on embroidery.

[@sndygskylr]

WOW! You are so clear and have not missed a beat! I’ve learned so much from you already and I haven’t even used my machine yet😱😍. Thank you and I hope you have more videos so I can get started. 😊❤

[@joetke]

Instructive, helping and so entertaining. Thank You for sharing your valuable experience.

[@striderls7354]

Greeting from mexico, your videos did really help me to get started.. keep up the good work man youre awesome

[@adubbproductions]

Thank you. Thanks for watching. I appreciate it.

[@erinwytiaz9026]

Thank you so much for this! I just ruined a shirt because of how thin it is, and I was so stressed about stabilizer that I didn’t even consider using fabric instead! You da bomb!

[@adubbproductions]

Erin Wytiaz 🙏🏾. Thank you. I appreciate it.

[@angelaackerman8934]

There are many types of stabilizers; some better than others. I have even used interfacing. He has a great idea for using up a lot of scraps or old garments cut up:) Whatever works for you is fine.

[@jaeo9999]

I appreciate the video! Going to go shopping for spray glue and fabric now 👍🏻

[@larrybrown6694]

Man I appreciate u actually showing every step. Great job

[@barbkrejca]

Thanks, Allan, you are to the point, keep it simple without too much complication. You do a good job of thinking the task through and then telling the rest of us. I like your camera resolution and focus most of the time. Good luck to you.

[@adubbproductions]

Thank you. 😁 I appreciate it. Thanks for watching Barbara.

[@janetmorgan6082]

I never knew to use fabric as a stabelizer. What a great idea and recomention! Thank you so much!

[@adubbproductions]

No problem. I’m not even really sure if this is a thing. I was just out of stabilizer and needed to make this patch. Thanks for watching.

[@Lzarate]

@@adubbproductions what’s the material of the fabric? Just regular %100 Cotton?

[@Lzarate]

@@adubbproductions and why use fabric & not the tear away ?

[@mikeferretti7422]

Won't fabric feel weird for who is wearing it. I get in a pinch and if its for you

[@adubbproductions]

I’m using 100% cotton fabric because i have a lot laying around. Never use tear away on clothes that get washed. Why would fabric feel weird on the person wearing it when clothes are made of fabric?

[@TheCanadianDailyofficial]

I love my se600 . It is an amzing machine, still learning it and your vids really help man! keep them going. Thanks Bro.

[@rachelsmith5215]

This is a great video! Thanks! You make it look so easy. Using fabric as stabilizer is a great idea.

[@angiew8992]

Great video!!! Did my logo right the first time AND in just 15 minutes!!! Thank you!!!

[@andreaknapp6085]

I'm just starting to learn embroidery and watching your video, you make it seem so easy! Thank you for showing the whole process from start to finish.

[@adubbproductions]

No problem. Thanks for watching.

[@DJOLSKOOL42]

Thanks my brother for your video. I have the Brother SE 1900 for about 5 months now and it's still in the box, I've been very busy with other things BUT I will soon be cranking my baby up. 💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾💪🏾

[@loriewilcox7999]

I was nervous to try the embroider part of this machine of mine. But now I feel better with your guidance. I love the sewing part of this machine. I just purchased this new machine after using an older model brother sewing machine for almost 30 years. this is an awesome machine.

[@Cornell843]

I enjoy watching your videos, particularly how you address issues, like changing the bobbin in the middle of the embroidery. That was something I was wondering about how to handle and then it happened to you! I've learned a lot. ......Good Job!

[@adubbproductions]

Thank you.

[@KingHar1em]

I am here after I got mines thanks for the suggestion 💃🏽 I will never unsubcribe 🤗

[@adubbproductions]

I hope not. Thanks for watching.

[@cynthiavansteenlandt6303]

Omg thank you so much! This helped me solve all my problems with stretchy or thin fabrics!

[@bigglucc986]

Appreciate what your doing watching your stuff for awhile and you convinced me to take my side hustle up a notch so today I pulled the trigger and got the PE800 was going to jump str8 in and get a single head 10 needle but I'm a continue to watch your videos I also got the sg500 thanks again and continued success

[@StephRenee812]

New sub!!! I'm excited to learn.. thank you for being so kind

[@adubbproductions]

No problem. Thanks for watching.

[@ingeneren]

good advice on using fabric for a stabilizer. I would have to apply the soft stabilizer to the back of the shirt after embroidering because the cut away stabilizer I used does not feel good against the skin.

[@rhondaandrus7481]

Great demonstration! I think it turned out great. Had no idea thrcpersonal embroidery machines could do that good. Impressive!

[@patriciaklee884]

Your style of education is great. Thank you so very much for these videos.

[@debbietolly2948]

Thanks for sharing I have a hard time with the bobbin thread and getting the tension right I like the fact you use fabric for your stabilizer so much easier ! Love your videos

[@adubbproductions]

Thank you. Thanks for watching

[@lifeofkellz842]

Do you know what the difference is with using fabric and a regular stabilizer? Thanks, new embroiderer here!

[@MalaiSweetz]

awesome videos!! yes more video on embroidery on garments ☺️☺️

[@adubbproductions]

You got it.

[@sonnysun3516]

By far the best video without having to buy all those fancy stabilizers, tearaways, etc. Thank you! 🌷

[@adubbproductions]

No problem. Thanks so much for watching.

[@marcellodompig213]

I like your videos you are straight to the point, I follow you from the Netherlands 🇳🇱. I bought brother NV880E

[@totallynotabot151]

Particularly for T-Shirts I'd recommend a final layer of Sulky Tender Touch on top of the stitching so it doesn't feel weird.

[@JMDVENTURESINTERNATIONAL]

i think also good to use water suluble stabilizer on top of it.I also bought book manual of embroidery. All info can be found the book

[@xtramane947]

my main concern was how to get multi color , and no one would explain. thank you so much !

[@adubbproductions]

You are welcome.

[@janicecorkran3957]

You are a great instructor. Telling it like it is. ☺️. I am new and just got my machine yesterday I get my thread today. I have already learned a lot just watching this one video. I look forward to watching more of your videos.❤

[@sandicasey6620]

Thank You! Very nice video! I have a SE600 and PE800 found this video inspiring!!

[@jennifercano9465]

can you make a video talking about your business, how you prices your item, launching your business, making website for your business? love your video!

[@adubbproductions]

Yes, yes I can.

[@fanciboiz2607]

Just come across your channel, absolutely brilliant! Can’t wait to binge everything. I’m an artist who wants to start embroidery and making my own T-shirt’s

[@Teenangels_]

How is it going?!!

[@adubbproductions]

It’s going great.

[@adubbproductions]

That’s awesome to hear. I’m glad you found the channel. Can’t wait to see what you create.

[@user-ii5dj3up8o]

Learned a lot from these videos first time using my SE 630 had it for over 1 1/2 years just used it for regular sewing g. Thanks

[@LindaMaeNot]

This was awesome. I love your pep talk. 👍

[@Marie-vy9bs]

I was actually going to ask how to replace the bobbin thread during a design, so Im so glad that you showcased that!! Your videos are so great and fun! I just ordered my Brother se600 and cannot wait to get started! Keep the great content up please!! Do you have any videos for words/monograming???

[@bettycooper2345]

I love this. I have a se625

[@tammysoutherland1405]

Oh show the memory stick would be great to see in use.

[@asharenninful4216]

I just have to say this Thank you I appreciate you so much you taught me how to use my SE600 thank you 🙏🏻 I appreciate you

[@arcticfirealaska810]

Thanks for the video. This is the most detailed video on this machine I've found.

[@angelicatonya881]

Can I be able to make my own designs from scratch , plus I love the way you were patient with the tutorial

[@adubbproductions]

Yes you can make your own designs from scratch. You need digitizing software. Here is a video I produced on digitizing. kzbin.info/www/bejne/q5K2ZoFqq6p1hrc

[@carlahaggard6758]

This is a great video! Thank you for your time. One question: Should the t-shirt be preshrunk before stitching?

[@adubbproductions]

I would say yes it should.

[@sewwhatseamstress9076]

I just got a New Brother PE 800 and can't wait to try this!

[@jesreenelee-bowra9698]

Wow! That’s lovely. I need to get one of these machines because I love sewing and designing

[@queenblanco7663]

“Make ur youre dotting ur Ts and crossing ur I’s” 🤣🤣🤣 i hear that broo

[@adubbproductions]

🤣🤣🤣🤣🤣🤣 right.

[@Reneasewitseams]

What kind of fabric did you put on the back and thickness of it please

[@lam3682]

i love this video. it gives me a detailed look to how the machine works

[@Ezratruth]

Thank you so much for this video as I just purchased a SE700 because I really wanted a sewing machine and I was also interested in learning how to embroider. This video has been so very helpful to me as I start I start on my embroidery journey.

[@alexsh1523]

I’m trying to embroider currently on a shirt at home, and you’re right, the tear a way is not the move. What type of fabric are you using ?

[@FUW-guy]

It looks like he is just using regular fabric.

[@kathleenlang7436]

Video was great! Thanks for explaining the tension. Since shirt was white, would it be better if you used a lighter color for backing? Yes, please do more embroidery videos, I am learning a lot. Also, I agree with other comment, please embroider on towel.

[@adubbproductions]

Will do. Embroidering on a towel coming right up.

[@ladyploveroflife5014]

You are definitely a go to for informative information. Thank you!

[@MacSherry]

I was given a Brother SE 1900, discontinued model but still sold. You are so good at teaching how to use an SE machine for embroideries, taking the scary part of learning out. When you said to your viewers what you corrected doing on your own learning curve it helps a lot specially on the tension control. Thank you so much.

[@adubbproductions]

My pleasure. Thanks for watching.

[@arianahernandez5774]

What would the tension be for a hoodie and a crew neck be ? This video was really helpful thank you !

[@adubbproductions]

There is no general tension setting for different garments. That just the tension I set for my digitized designs. Someone else’s digitized file will have different settings. Try to focus more on hooping correctly and digitizing right.

[@lorenasofiajalil7183]

Hi :-) Does cut away stabilizer work fine for t-shirts ? Ive been having trouble embroidering on t-shirts (poly / cotton)

[@renatal1972]

lorena jalil use a woven stabilizer that is iron on.

[@ansaridesignerhuawei6423]

I am embroidery designer.. If someone have work regarding me contact me.

[@kingjeffishere]

Thanks for the vid! I've been subscribed to your's & another KZbinr for quite some time for your Brother vids, and yesterday I FINALLY jumped out there & grabbed the se625 to get my feet wet by embroidering my new brand. You're right, you can talk about it or be about it! I want to start with Polos, so, this video made me feel it was possible. Thanks again!

[@MarkFieldsmusic]

OMG, This video is gold pure.. thx mate

[@bornasinner]

Do you have a video explaining how to embroider on sleeves? Like I want to embroider onto sweatshirt sleeves but don't wanna sew the sleeves together! If this even possible cause I can't find anyone to tell me how 😢😂

[@natashaross7382]

is this machine good for a bigger design, specifically like a college sweater. yunno where the name is embroidered on the front in like a rainbow arch ???

[@infern1491]

Good question, is it ?

[@KyraLynn09]

You can get different hoops to use on it.

[@jessicacovington4687]

Thanks for the video! I've been searching for a video to show how to use the stabilizer and hoop on a t-shirt. I followed along and was able to complete my first project.

[@samfergeson4337]

I appreciate you! This has been amazing to learn from you! Thanks for showing how you think through things it is truly helpful! Thank you thank you thank you!!!

[@calliehernandez7138]

Love this video. Why do you use fabric to stabilizer over regular cutaway stabilizer? Do you always use fabric to stabilize your designs, or just this dense patch type ? Please keep the videos coming, especially DTG embroidery.

[@adubbproductions]

I use fabric when I don't have any more cut away stabilizer.

[@LuisAlvarez-qb9xt]

bro i got a ad about the same thing on this video and i watched it all because i thought it was the video

[@adubbproductions]

Lol. Well thanks from watching. I appreciate it.

[@pastimejunkie1031]

Look how far you’ve come! I am grateful for all you’ve shared.

[@adubbproductions]

🙏🏾. Thank you. I am great full to be able to share. Thanks for watching Pastime.

[@cathyfarlow1211]

Thank you. This is very helpful. I've been struggling with this and your video helped me a lot.

[@QUINDERELLAISH]

Can you show me what kind of yarn the se625 uses I really want to learn how to use my machine I do not want to mess anything up

[@adubbproductions]

Well the machine uses embroidery thread not yarn. This is the thread I use. amzn.to/3lOBjWv

[@QUINDERELLAISH]

A-Dubb Productions Allan Wade thank you for replying! Can you also tag your video for getting started with the machine how to use

[@QUINDERELLAISH]

A-Dubb Productions Allan Wade lol didn’t mean to say yarn but Yes I want to know the type of thread to use thanks!

[@biggsexiigurlable]

What is the difference with se600 and the se625 I have the se625 and haven't tried the embroidery feature yet need to buy embroidery thread since its recommended not to use regular thread.

[@rondajones4573]

Angie Clark , I to have the SE625 and wonder what the differences are.

[@biggsexiigurlable]

I found out the difference its ours has more preset embroidery designs in the machine and on cd

[@blancaguerrero4251]

I like your voice, I can understand everything you are teaching us. I found this video very useful.

[@asc810]

This was awesome. I have to watch more of your videos, so I will be a pro at it. Thank you. Subscribed!!!

[@andreamorales9595]

Can you do a custom design on the machine?

[@adubbproductions]

You can not create a custom design using the machine but you can create a custom design using embroidery software and put the file into the machine via the usb flash drive and stitch out that design.

[@Jeane201]

I have a jacket I want to put a design on. Could you demonstrate doing one on a northface type of jacket, like anykind of fleece jacket? I have a jacket but I don't want to mess up my expensive jackets.

[@adubbproductions]

I actually have a video embroidering into a hoodie. When i get a jacket like that that I wanna out something on I got you. If your gonna do it I would just suggest using spray adhesive to keep the fabric extra still after hooping it. Definitely practice first though.

[@Jeane201]

​@@adubbproductions​ is the video hard to find on your page. I have a vinyl type jacket I could practice on also.

[@Jeane201]

@@adubbproductions can you tag me in that video?

[@ruthramos4400]

thank you so much, you are great at explaining in a way I can understand it. God Bless You

[@chenieltorres1948]

Bro you motivate me, thanks for this!!!🙏🏽

[@lixnvqs7380]

Im wanna try to embroider a hat i would like to see yiu do ut

[@adubbproductions]

This machine isn’t for hat embroidery. It does not have a proper curved hat hoop. i would have to totally flatten out the hat and depending on the type of hat (like the ones I wear) it wouldn’t look good anymore after being flattened out of shape. Maybe I’ll get a soft cotton hat and do a video on that.

[@Joegetdough]

How do I get my logo from illustrator onto a usb to use on my brotherse600? I put the usb in and no logos pop up

[@adubbproductions]

An embroidery machine reads embroidery files. You have to get your imaged digitized into an embroidery file. Either you need digitizing software to learn to do it yourself or you can pay a digitizer to do it for you. E mail me your logo if you’d like for a price quote. [e-mail]

[@sheenabrown3080]

Thank you soooo much !! These videos are life and time saving

[@farleycraig6827]

Loved the video, thanks for all the tips.