This is a detailed video on how to engrave using rotary tools. From start to installation this is the video that will show you just how easy it is to get started learning how to engrave on your own.
Пікірлер: 85
@MrMarkToler2 жыл бұрын
Such exquisite craftsmanship and artistry. Badass AF!!!
@oun6661 Жыл бұрын
Thank you for sharing. I know there’s definitely more to learn, but this gives me a great starting point!
@Bluespade1153 жыл бұрын
This is Absolutely Stunning Work.
@Crimson512 жыл бұрын
That was sick! Beautiful work!
@josehuerta16grapix Жыл бұрын
Bro. You need to upload more videos. There's this other guy whos been engraving on lowrider for almost 30yrs. And it seems that he's stuck on 1st gear. Your work looks very professional and clean.
@AndleT772 жыл бұрын
Just stumbled onto this video, bad ass work. ✊
@e9s42tv69mo3 жыл бұрын
Thank you! Excellent video!
@justinthomas272 жыл бұрын
Dope work! You motivate me to do big plates like that. I want to do silver and gold. I’m just now learning to engrave but I’m a jeweler so I’m on the bench everyday grinding. One day I hope to be nice like this 👌
@user-xk4ml5oi6x7 ай бұрын
How's it going did you fall through
@alsaffarstudios2 жыл бұрын
Beautiful art work 👍🏻
@tedbundy80872 жыл бұрын
Beautiful work friend
@ManuelPerez-to7dg3 жыл бұрын
Good wrk thx for gettn dwn on my ride brotha
@isaiahhoit7956 Жыл бұрын
Just subscribed man this video is super informative and good quality keep up the good work mayne
@rutenearama6132 жыл бұрын
Bro wicked video.👍🏼
@westcoastkruzerezwestcoast14262 жыл бұрын
Dope work bro.
@josehuerta16grapix Жыл бұрын
Your floral scrolls are insane brother. Better than everyone else
@BrokenBolts6 ай бұрын
What a great comment! Thank you
@jonasbuteaux33673 жыл бұрын
GREAT WORK!!!!!!
@dylanxcollins Жыл бұрын
Just got an engraver wanted to see how to use it and and it’s quite literally just like tattooing it seems so this is boutta be a breeze thank you for the informative video.
@azarelthecreator7098 Жыл бұрын
I also tattoo and started engaging. I use a micromotor but will eventually get that 400,000rpm air engraver that hes using. The vibration of a micromotor is like the vibration of a newer pen style tattoo machine. The rotary tools like dremels even with the flex shaft are much harder to control than a micromotor. You can buy a nail drill or dental drill. They are all the same thing as long as it goes up to 30,000rpm or more. I engraved one of my tattoo machines with the smallest burrs i could find and magnifying glasses.
@diecast_MikeEspo Жыл бұрын
Was the machine you bought for beginners ?
@jayh9635 Жыл бұрын
Thanks for sharing!
@TheOldKid Жыл бұрын
Nice work!!
@chrissport16302 жыл бұрын
Hey bro can you do a tutorial on how to engrave electro plated parts like door handles and window covers?
@blue28245 ай бұрын
Damn nice work!!! 👍
@jaybee11583 жыл бұрын
Damn bro I’ve been looking everywhere for something like this.. I wish it was a lot more in depth with what your using and why. I wish I could pick your brain more bro this is something I’ve been wanting to do but no guidance or no one I can at least ask a few questions to get the ball rolling but nada …I’m gonna check out any other videos you have again mucho respecto ..
@tristania4562 жыл бұрын
AMazing work! May I ask what device are you using that goes in between your compressor and 850 tool?
@stevegarland70752 жыл бұрын
Doing all that sanding does it effect the chrome?? I’m talking like on door handles and trim around the windows. Your layout does take time, I engrave buckles and small items on SS and German silver it’s a different technique but the same in layout process. Keep up the trade you do excellent work!
@ArtsCraftsJoe3 жыл бұрын
Awesome!
@eduardolz122 ай бұрын
Thanks for sharing
@rickeyevans6448 Жыл бұрын
Nice work
@rea87552 жыл бұрын
Thank you
@scslumerican36072 жыл бұрын
A how to video would give pertinent information. You know like bits, machinery , etc. You’re absolutely talented, no doubt but nothing informative on the video. I look back through the comments and every question about equipment has gone with no reply back. So maybe a quick second for us FNG’s out here on the bits and rotary tool.
@rancewhite93122 жыл бұрын
Nice man, what engraver are you using? Do you ever use an air chasing engraver?
@samuelgonzalez64893 жыл бұрын
Have you ever tried doing a bumper?
@kirkhusted79423 жыл бұрын
Seriously incredible work. You have an amazing talent. I still have an idea i would like your opinion on
@BrokenBolts3 жыл бұрын
Bro call me. It’s been to long
@kirkhusted79423 жыл бұрын
@@BrokenBolts 810 I don’t have your number 728 but I have a bobber project I want to start soon 2400 from a 76 Honda CB500’ text me or call me
@FernandoHernandez-vr2cd3 жыл бұрын
Dam bro u get down thats tight I bought a engraver because I want to learn I tattoo so it should almost be the same right
@rubengonzales5390 Жыл бұрын
Hey bro did you use glue or stencil glue to lay the paper down and do you think that method would work on glass laying picture down on glass like that
@PeluzitaCorleone2 жыл бұрын
Amazing work!! I was wondering, isn’t any chance of that work to get rusty? I want to give it a try but there is a lot of moisture in this place and I’m afraid that iron plates could get rust, even if I polish them.
@BrokenBolts2 жыл бұрын
In the video I’m using aluminum which will oxidize however if you keep it clean it will stay shiny. Aluminum will oxidize like any other metals but it doesn’t show a rust color. Aluminum and stainless steel will be your best bet at having a finished product look without having to chrome plate it to protect it from oxidizing (rust)
@612fresko2 жыл бұрын
You can always clearcoat it to make it last longer
@Chris-from-AZ2 жыл бұрын
Where would you get an engraver like that?? And have you tried air chisel
@bradbrown21682 жыл бұрын
What pneumatic did you use?
@NecioVargas2 жыл бұрын
What is the paper your using called? Nice work.
@user-wn3tm4pn5m Жыл бұрын
It’s done with a dremel?
@Allproasphalthtx2 жыл бұрын
What is the name of the paper that you use?
@staydippntv22213 ай бұрын
What is the difference between the handpiece and the nitro as far as quality? I see the handpiece is way cheaper compared to the nitro or the classic
@romeyrome32192 жыл бұрын
I see your 63 has Colorado plates do you do work on other ppl cars and Motorcycle.
@boylee1602Ай бұрын
What program is that on the computer
@brunolandasantana55062 жыл бұрын
What happened to ur other videos ?
@josebeltran7023 жыл бұрын
What tip do you use to do the lines? And to do the shading? Your work is bad ass!
@BrokenBolts3 жыл бұрын
Round carbide burs for the lines and the dremel engraver for the shading
@famadrid782 жыл бұрын
Nice work, any plans for a tools used type video?
@BrokenBolts Жыл бұрын
I labeled all the tools used in the video as they show up
@SnailHouseProjects2 жыл бұрын
what oil can i use, or do you use to lube the surface and the tool? i remember seeing one of your videos waaaay back and was always curious. i finally got an engrave like yours and i just want to make sure that i'm doing everything right
@carljay4021 Жыл бұрын
What tool did you get and where?
@BrokenBolts6 ай бұрын
I’ve started using wd40. It’s easy to get and I get the same result
@sevaslee48653 жыл бұрын
O.G id like some work done you have a website???
@joerogan34612 ай бұрын
what kind of sticker paper?
@anthonyagliano38383 жыл бұрын
Good deal
@alexturner84613 жыл бұрын
In no way does this mean to sound disrespectful but if the music was in the background and you was talking this would be the best video on youtube for are hobby and lifestyle and next video i really hope he dose this to a motor like ive been trying to find out how its done so i could do it in my area
@thomasboswell34972 жыл бұрын
So bad ass!!
@sexypanda1572 жыл бұрын
What the?! A dremel? I have a dremel and it do do anything close to this, what kinda dremel is that?
@richardfelipe79543 ай бұрын
for some reason when i buff out the peice the buff residue gets stuck in between the lines and wont come off, any thing i might be doing wrong?
@adriansifuentes4405Ай бұрын
Did you ever figure out how to remove black residue? I’m having the same problem
@richardfelipe7954Ай бұрын
@@adriansifuentes4405 honnestly yea i just started to polish the metal to a mirror finnish and engrave it after and just maintain the shine with mothers mag it works cherry
@Chris-from-AZ2 жыл бұрын
That was coo
@josebeltran7023 жыл бұрын
I have a drimal
@davidsolomon9152 жыл бұрын
Where you old videos?? I know you had more up at one time
@staytrillbeck27273 жыл бұрын
bro i need you they trying to jok my plaque i need more
@BrokenBolts3 жыл бұрын
Dm me on IG @OriginalEngraving
@Choloshit9703 жыл бұрын
How can I get in touch with u to get some work done I don't have any social media
@BrokenBolts3 жыл бұрын
Sorry for the late reply. I’m not on here much anymore. I’m on Facebook and IG @originalengraving
@jcarloshernandez32593 жыл бұрын
I would like to make some legs to my 1950 chevy truck
@BrokenBolts3 жыл бұрын
Pm me on fb at original Engraving
@sammiel55872 жыл бұрын
damn that takes all lot of timing to do that but nice art
@baqergt50623 жыл бұрын
Did you have instgram
@BrokenBolts3 жыл бұрын
@brokenbolts20
@baqergt50623 жыл бұрын
@@BrokenBolts I follow you
@alanparadis50612 жыл бұрын
What's up with that music?? Great video muted
@Andysbodyelectric Жыл бұрын
Nice job, but it is not informing at all, sorry
@dontcallmetravis2 жыл бұрын
Very clunky lines. Nothing like real artistic engravers do.