How to EQ Bass

[@quiggycarboncat4280]

Joe - I don't know if you've heard this before but you have THE PERFECT VOICE to be a famous radio personality!!!!!

[@Patrxck87]

His voice reminds me of Jim's voice (from office) lol

[@yasharhp1669]

Agree, fourth here

[@alexberdea]

It’s all dubbed ppl He’s got the technology

[@garbygarb31]

It's called proximity effect

[@salintium]

Yeah its radio voice. My ex bro in law and a friend in LV both have that voice.

[@PastorSteveOkeke_KKCI]

You changed my mixing life with your down to earth, easy to understand approach. I finished a mix yesterday and sent to two different Mix Engineers after watching you for some days now and they shouted wow. I have never had it this way for some times now. Thanks Joe

[@YourFavouriteColor]

since the bass is monophonic, one word of caution. You don't want your EQ cuts or boosts too narrow or too extreme because you begin to make individual notes, or a small range of notes, quieter or louder than other notes. A C# that JUMPS out or a D that ducks out. I have a similar approach to mixing bass, but I generally keep the EQ shape much broader and try not to cut or boost beyond a couple DB.

[@HomeStudioCorner]

Good point, but SOMEtimes there's a specific frequency that's jumping out regardless of what note is being played, like in the example I showed in this video

[@YourFavouriteColor]

@@HomeStudioCorner totally. but an unintended consequence may be uneven amplitudes of individual notes so it is a bit of a balancing act. also automation can potentially compensate too.

[@nonamesneededofficialpage7576]

Easy fix, do what Joe did then add bass rider, problem solved.

[@MelomanTheNerd]

Surfer EQ allegedly solves this very issue ... ; )

[@roadtonever]

Huge low shelfs are fine if you turn down the steepness a little. I recently boosted an thin sounding bass by 21 dB below 180Hz, turned out great!

[@swaftbelic]

To add to this, keep in mind that problem frequencies in the bass may not occur consistently on every note so when you A/B your EQ edits, you may only notice a difference on some notes and nothing on others. At 10:10 you can hear when the EQ difference became much more pronounced on the higher notes in the scale. Thanks for your great videos! Your approach to teaching audio is very effective and absorbing!

[@CLELDKFKEJ]

I love this channel because everything you're doing is in a DAW I actually use and have experience with. Thank you for such useful videos!

[@JoelLangley]

I love the clear and concise directions for this. None of that mumbo jumbo and “oh I used this super expensive preamp that’s $10k and blah blah blah”. Makes it easy for us 9-5 folks to follow and not have to worry that we don’t have a million dollar studio equipment setup 😀

[@francescoricci7546]

Don't care about stupid comments, this is the right way to cleanup the bass in the mix; this method helps also to avoid unnecessary resonance vibration of loudspeakers caused by some frequencies (between 100 and 600/800 hz) without losing power, indeed we gain clarity and a deep punch bass. Keep it up.

[@doknox]

Everytime I watch a video like this thinking I'll learn something new I find out it's the same stuff I've already been doing for years! Thnx though.

[@OdinOfficialEmcee]

Great tip, something I do also. I have also learned that high passing can really help clean bass up. For example, I ussually sit my kick at 60 Htz and bass at 80 Htz and so I high pass up to around 70 Htz (on the buss). When using DI's and amps I ussually let the DI provide my lows and the Amp give the cutting highs, works really well (thanks PLAP!). Also, I use really heavy compression and remove a good majority of the bass' dynamics to keep everything even and steady when coming through subs to prevent the "wobbly" or "flabby" bass sound.

[@20Larson]

Odin OfficialEmcee Gvbvvvvvc. Cccc

[@GeekTherapyRadio]

THIS. Let kick have it's own room to breath, then bass, then toms, snare, etc as you work your way up from low end to high. No sense in electric guitars having any room under 150hz -ish....it just muddies the mix. Let each instrument have its own space. Also, side chaining the the bass guitar to duck under kick beats REALLY tightens up the low end.

[@jorgepeterbarton]

I low pass to 70 hz on my basses. Its called the actual energy of a track tbh. the fundamental tones up to /somewhere on the A string/ are below 70hz so why remove them?. of course its blended and i am exaggerating...and find other ways to free the kick that aren't 'quick fixes'.

[@jorgepeterbarton]

@@GeekTherapyRadio dunno about that. mud is more low mids. some guitars are meant to be bassy, you've just got to spend a bit more time in other areas to be honest. removing the fundamentals of instruments is nonsense. I'd totally agree for a lead guitar, however, because its literally not playing lower than 150hz. maybe its why people then spend ages seeking a 'warmth' plugin after taking out the warmth from their tracks idk...hmm...

[@GeekTherapyRadio]

@@jorgepeterbarton Totally. 100% depends on material, style, instrument, genre, etc... Eq'ing for jazz would be utterly horrid for metal/rock.

[@peterosipov400]

This is pretty much the opposite to what I usually do to my bass in the mix. I usually make a small dip around 50-60Hz, so the kick could be better heard in the mix. Sometimes I even highpass the bass (and I would highpass this part also a bit). I also raise a little in the area 300-400Hz, so the bass could be heard in the mix on small speakers. Maybe this song asked for this, but this is not the way I'd mix the bass to begin with. The bass by itself definitely sounds better, but I think in the mix it adds more rumble, than actual low note. Anyway, I don't know this project, maybe this song asked for this approach.

[@David-hs1bu]

see thats the problem with y'all, y'all are PRO SPECULATORS AND PARROTS

[@peterosipov400]

@@David-hs1bu you're most definitely right and if you think I'm not the same person I used to be two years ago you're clearly wrong

[@baselinesweb]

I agree with you. The number one issue with this I would address is the pick sound. It's way too much for my taste. Maybe that's in the 2K range.

[@gcoudert]

Great advice! Suggestions for further videos (if not already covered): - Panning and using send effects on drums (Which type of reverb on which drum kit instrument? Same type of reverb on all drums or different ones? Using EQ on reverb? Drum panning - how wide?) - Should we automate volume changes on a track before reaching for the compressor?

[@dreambeliever3652]

Joe.... just fantastic bro! Bass can be such a difficult instrument to get to slide right in the mix like butter.

[@jeffreydhill]

Someone needs to make one of those 10 hour videos of Joe wobbling his hands and saying "WOAHWOAHWOAHWOAH" lmao

[@lavalizard1]

Great explanation as always Joe! I can imagine how those changes would help the bass sit in the mix (thats the only thing I was missing)... Cheers

[@Timhisattva]

I would have liked to have heard the bass within the rest of the mix. I like grit too but I was interested to know if that annoying clicky string noise, around 2 or 3 k got absorbed or became less irritating. And I might have high passed around 30 or 35 Hz... Thanks for the video.

[@brendanhilgeman1395]

11:48

[@Timhisattva]

@@brendanhilgeman1395 Thanks... didn't realize he played the track at the outro of the video.... wonderful distractions abound.

[@jorgepeterbarton]

never got the high-passing of bass instruments but to each their own...there a better ways to give the kick room without killing the energy of a track, even if its a 'fashion'

[@oswald2437]

Some really useful information especially the 50Hz for the bass.

[@alvagoldbook2]

I have kind of an usual process for bass. Bear in mind I have a very nice Trace Elliot rig with a 2x15 cabinet. I take the DI out from the head and put it into a gnarly tube pre like a Studio Projects VTB-1 that’s cranked really hard. I then put a large diagram condenser in front of the 2x15 maybe 6-8 inches away and put it into another pre like a UA LA 610. I might compress a bit in the box but I don’t EQ anything. Just blend to taste. Sounds like the sky is falling.

[@OphilliaBalls]

amazing, i'm just starting to teach myself how to mix my tracks, thank you for sharing !

[@heavymetalmixer91]

i never thought a cut around 100Hz and 200Hz could do so much for my mix (a Metal mix), thanks a lot!

[@rickster58]

Joe that was good. My preference is to remove some of the fret buzz also.

[@TheMertoman]

Joe do you teach a class on mixing ?.. man I learn so much from your videos.

[@HomeStudioCorner]

Yup! www.homestudiocorner.com/mix

[@walterearl5138]

Thanks for sharing this really helped will be watching more of your videos

[@davejohnsonmusic]

No low or high pass filters to clean it up a bit? I like to EQ two bass tracks like this separately and add the filters according to the frequencies that each is dominating. Best wishes for the new year!

[@XiyuYang]

I would be more careful cutting bass around 200-500, that's where the mud is but that's also where the warmth and power is

[@troutstudio]

Joe I want to thank you so much for this. Really useful information I am very glad I found this channel. Tearing my hair out over bass this is the Gospel. Cheers and all the best mate.

[@BLACKSYNTH]

A lot of your "midrange" you say is happening around 90-120, thats not midrange, low mids is considered 250-500 , but a lot needs a tight Q pulling out headache htz around there usually between 120-150. on bass though dont dip them too much as they usually occour on just certain notes and can make them dissapeir completley. I would always Compress the Bass before any EQ, mainly with a multiband to keep the low end solid before you start cutting away at it. I normally do that on my DI and high pass the amps bass a little more than the DI keeping the DI for the lows and the amp sound for the low mid charictor and colour. a nice boost at 800 keeps it present on small devices and speakers we all know how people love to listen to new tracks on a mono phone speaker :D. yep Bass was the last thing I got my head around. taking lots of breaks helps as bass really messes up your perception withing even 10 mins of mixing it.

[@SoJesusChristMusic]

You're an awesome Teacher... unlike the ones that promise you things they don't really give...but we never notice until we've watched hours and hours of their garbage. This what you give is more like groceries!

[@mikemeengs4124]

Well done! Notch out those ringing frequencies. Most of my EQ work is subtractive.

[@LOKJazz]

Personally I like to mix the bass when in context then isolate it and tweek it if it needs it. OR maybe I'd like to hear your track in context to know the context.

[@roxammon5858]

Another great video Joe. I was expecting to see something about balancing the bass eq with the kick drum eq. They often compete for the same eq space in the mix.

[@HomeStudioCorner]

I think people like to talk about them competing, but they don't really compete.

[@mitchellchurch3385]

You should check out how Joe Baressi mixes bass and discusses how the phase and the DI hits the interface sooner than the amp source. Also Joe treats it different and his bass is more noticeable in the mix.

[@XiyuYang]

Also, I've started to use multiband compression with different techniques (downward, upward, sidechains, expanding) on bass. One particular thing I found it low cut a bass at around 60 hz and compress every below 200hz extremely heavily often get me where I want to. On top of that upward comping anywhere between 200-800 helps the bass jump out more, but in a very consistent way. The thing about mixingg bass is consistency (at least in rock, electronic and pop), you don't want a lot of changes in volume on a bass. Jazz and classical is a different story tho.

[@LloydMajor]

Your one of the best teachers Joe!

[@ZiggyDude777]

He has taught me too

[@davidmcintosh263]

GREAT tutorial!!...but spill...where'd ya get the desk??

[@mcsweet1966]

Hello Joe, Thanks for another Great Video. I like to use a combination of Static EQ and dynamic EQ to massage the sound something like the UAD Sonnox® Oxford Dynamic EQ Plug-In . For me cutting frequencies is like cutting a string on a guitar, I prefere to do a med/large Q Cut of 1 to 3 db and then use the dynamic fonction to fix only when it become a problem keeping the full spectrum. But Going Back to the ONLY rule of music ... If it sound good then it`s Good. Have a Nice Day.

[@DialToneTP]

does this work on any bass? I use stock instruments from my DAW.

[@mickimarbhmusic]

Excellent and to the point 🤘kudos from Hamburg ⚓️ ✊😎🎶

[@ondrejtregler]

thanks, I always struggeld with the bass EQ and this pretty much explained me the whole thing :)

[@salintium]

Hey Joe I appreciate this. Kali Audio LP-6's are the best Studio monitors in their price point. The punch from them is just right (if the Mix is right.) To many Aud Eng's of famous professional Artist just don't get it right. Going from one song to the next you can hear the differences in the mixes of each song. While I hate Party in the USA by Miley I like listening to it because of the mix. The bass is just perfect. I haven't gotten to the mixing portion of my song yet' but I'm finding I fight with the levels of the mix in the source and bass is a chore. This really helps thanks

[@hafidhtepeng7446]

Joe, you’re so wowowowowowowoo. I like it. Thank you!

[@GloveBunniesVideos]

Thanks, Joe!

[@jstlez97]

Can you show a mix with piano... Also enjoy your work.

[@rockwriter9054]

The best advice and explanation for me yet Thank you Joe, would it be good when you have finished the E Q to add compression by creating a send, and parralell compress it ,or just use a compressor plugin ? Thank you.

[@MerlinMerlinL]

Thank you. In the whole world there is no better explanation of bass eq. I'll search bass versus kick drum now.

[@peterstevens7401]

I've never heard 100-200Hz as "midrange" . . . I'm used to hearing 500Hz associated with that term (as in this case): www.teachmeaudio.com/mixing/techniques/audio-spectrum

[@rome8180]

Yeah, 100-200 is literally the best part of a bass guitar.

[@kensmechanicalaffair]

Midbass

[@almur88]

I'll always remember the saying of DAve Pensado in one of his episodes about bass: Dave, how to handle bass? - I would say "mute the damn thing, it's just too much trouble to deal with'!

[@michaeljensen1625]

Very timely for me. Thanks Joe!

[@sickmessiah]

I do the same thing but more drastic on the cut. It usually opens up for snare body and lower vocal tones to pop out

[@PatrickObiang]

Hi, Joe! Happy New Year 2019! Thanx for all your tutorials. Peace!

[@thegoldenstratboy7293]

your videos are amazing!!! thank you for your work

[@boonfire3714]

Damn you Joe! I need to get off the toilet, stop with the great videos!

[@hamadxjm]

Really informative but how do you keep a space for the drum kick? If you keep the 50khz uncut or boosted the kick wont be heard!

[@flipnap2112]

you can use a compressor to duck the signal.. and there are a few plugins, like track spacer that will help to auto duck and make room

[@NelsonMontana1234]

Good video. I disagree with almost everything, but well done.

[@83mgr]

Ah ah I agree with you.

[@rome8180]

Yeah, I clearly have a much different opinion on what bass should sound like than this guy. I generally high pass the really deep frequencies and try to have the focus of my bass be around 100-150. To me, the mud is actually at 200-300. The way he EQ'd this bass did not sound like it would sit well in a mix to me.

[@avalanwa]

😂😂😅😅😂

[@NomenclatureDiablari]

Correct, the fundamental(first harmonic generally has the least tonal character, it has mainly sub freq) so the second harmonic actually gives you the tonal character sound, i generally lower first harmonic a little to expose the 2nd more

[@ZiggyDude777]

Joe is great with vocals and makes a high energy mix that I wish I could do. He knows stuff that is amazing and I watch a lot of his stuff and learn But bass is his Achilles Heal. Don't blame him though. For a singer that is often the case. The job for the bass player is to find a tone that can still be heard and prominent but not get in the singers way. And that matters on the singer and the band you are in. It always seems to be different.

[@johnboybliss680]

you have a lot of energy below 30 that is unnecessary.....

[@JacoBrownolymetal666]

A high pass at around 40-45hz would totally tighten this sound up I feel. Small cut at 200hz and a boost at 2k hz.

[@rome8180]

Most mixers I know are pretty liberal with the compression on bass. They like it because it evens out the dynamics. Granted, grit does that too. But if you go light on the grit you can still end up with bass that sounds much thinner or thicker at certain points.

[@brunosimonetta7098]

good info, however... the main problem with this vid is that you never show the track as a whole (only for 10 seconds in the outro) and we never knew if there's a guitar playing low notes and taking up some wanted low end, or if the song is only drums&bass&vocals and we want more mid range for the bass.. the info is good but where's the context?

[@simoncooper8272]

It's ok every guitar and bass were all playing the same at the same time so it's all about the guitar, the bass is just there to reinforce the guitars! Boring isn't it?

[@cantor7723]

Maybe because I use bass synths or keys for my bass sounds, but this bass sounds really noisy to me. I would also suggest a low cut filter very low. Human hearing only goes down to 20Hz. The lowest note on a 4 string bass is about 40Hz. I'd gently roll off about 30Hz or 25Hz on my bass. Not steep. Gentle. Bass is where things get muddy quickly. I like to get rid of parts we can't hear anyway so it doesn't trigger any compressors, gates, filters, etc. If it's gone, it can't interfere with other stuff. Also, using a high cut at about 100Hz would probably serve your bass better. Bass belongs below a 100Hz, especially with a full band. When a mixer listens to the full mix on an eq graph and they mute the bass, roughly the bottom 1/3 of the mix should disappear. You don't want other stuff down there competing with bass, and you don't want the bass up trying to compete with acoustic/electric guitar/vocals, etc.

[@brandoncooke6564]

This is like, the worst mixing advice I've ever heard. Don't get me wrong, if you found a way to make this work, then good on you. But telling people to do that as a general rule is just silly. There's tons of useful bass guitar sound above 100Hz. You take that all away and you have literally no pick attack, no useful saturation, you just have a deep rumble. Congrats, you got the FIRST HALF of a bass guitar, half right. Why not just use a low note sine wave in that case to represent your "bass" because it would sound the same? Then you don't even need to mess with eq or compression or anything.

[@cantor7723]

Brandon Cooke You missed the point entirely.

[@devonbiker]

This was really helpful. Thank you.

[@SuperLevelone]

Happy New Year 2019! as well..... Also Thanx for all your tutorials.

[@la.autordluke]

hey joe, im not sure about it, cause sometimes depend of the track that u have! btw well done, i like your channel!

[@simpzulu7395]

You have nice setup out there...When ever I see some clip how to EQ this or that at the end I always here "yeah it is subtle" and in fact I really do not hear that much change sound wise, not only in your case, but almost every other "it is subtle"..I think that sound was really good bass sound and personally I wouldn't touch it, but it was your decision, because everything is already being done. I think you would agree that everything is on the source 90% of the job is the how it was recorded and maybe 10% the rest of it.. Just to make a point out of this, I think it would sit properly in the mix if you didn't touch it, no irritating freq ..and you didn't play whole mix just we can hear how that EQ changes apply to low freq mix as a whole, you know :)

[@philu9319]

Man, what city are you near? What kind of rates do you charge? I like your work.

[@SkrawnCPT]

Hey. If you are mixing a whole range of sounds that have been sent to various busses, do you eq and compress the individual sounds and the bus, or just the bus, or just the individual sounds?

[@VaChiee]

big thanks great info always tricky

[@jackbrown3270]

YOU THE MAN

[@smagherini]

Joe I have been following your videos since the Covid19 crises.? They are great !!! I have studio one pro. I am a drummer and I use an electronic drum. With my band we got organized and the other folks are sending me their parts which are recorded with what’s available including smartphones and I mix it all up. Did you make any videos specific to help people like me? If not it would be great if you could make one.

[@christiansmith7391]

How do you reconcile this with getting the bass to be audible on smaller speakers?

[@bwall615]

I was waiting on Joe to address this. His EQ curve looks like what mine normally does. But, I've found using a notch at 800 Hz. to add a db or two works well for small speakers.

[@johnnyh64]

You could also try adding a little distortion/drive which adds harmonics that are audible on smaller speakers.

[@nick13music90]

Great video Thank you so much 😊

[@nickgarnero9843]

I am assuming by "grit". You not only mean buzzy stuf but also string noise because I haven't seen you address that at all. I like string noise and boost my highend for it specifically but there is a clipping quality to this track from string noise. I mean he isn't playing slap and pop so that string chatter is a little much.

[@gforce7four]

Step 1: Track with a P. Step 2: adjust fader to taste and leave it alone because a P is perfect just the way it is.

[@bersi1149]

Good video Joe - thanks a lot! But how do you do that with the lowend with bass and bass drums? Normally both shouldn't be playing in the same frequency range. Txs

[@armansrsa]

Bass can have super loud fundamentals and almost no mid-range depending on strings used and how it is played. Anyway, I didn't understand your part @ around 12minutes about the mid range being louder because when you pass the bass through the EQ you can see the low end around 100Hz is louder. Maybe we mean different things when we say "midrange" but in the EQ it definitely looks like the low end is louder than the midrange :)

[@timogronroos4642]

By cutting midds from bass, you are also creating more space for other instruments like guitar

[@1funkyangel]

Joe ,..if you’re doing more than one bass track , and running them up the middle of the stereo spectrum,.. won’t there be some phase cancellation issues ?

[@ArmareiVofficial]

Great video 👍🏾💯

[@AugustThor438]

The direct signal is way too hot. I agree you need a little bit of dirt for bass but it’s crucial to have at least one channel super clean so you have options. The lows are not as controlable if it’s too dirty from the start. Just my 2 cent

[@backspin6698]

I absolut agree. I always get that headache around 100 hz on the bass. I call it the Charlie Brown frequence, wonk wonk wonk.

[@polanve]

I'm listening on my phone, and everything is perfectly clear. My biggest challenge with bass is that it's inaudible when played back on a phone. How did you get this to play on a device that can't produce low frequency sounds?

[@BurntMcgurnt]

I'm sure he boosted somewhere around 1k on the final mix a midrange boost is how you get it to be audible on small speakers...oh and don't listen to low end on small speakers hahaha

[@marcelbr815]

Joe, hello. When you mix a deep bass like that, how do you eq your kick drum? Brighter with more emphasis in the 90 h? I usually go deeper on my kick drums, around 60 to 80 hertz... and push the bass a little further in the 75 to 95hz area... but the bass from your video is killer.

[@heavymetalmixer91]

It's funny how you made a bass sound better without using HPF first, and yeah, that boominess is really annoying and gives me headaches too.

[@RogerioValgode]

Always great tips, love this channel :)

[@mlungisindaba2092]

I like the cuts you made on the bass excerpt the boost you made on its low end because it made your kick to disappear. A mastering engineer was going maybe to help you with that. Thank you

[@HomeStudioCorner]

Drums aren’t mixed yet, but thanks!

[@mlungisindaba2092]

Ok

[@PhillipAlcock]

Joe - Don’t know if you’ll pick this up, but how do you ‘add grit’? And would this apply to live playing too?

[@HomeStudioCorner]

Some sort of distortion, like a sans amp pedal or cranking the amp

[@SuAmigoElilegal]

Question please . I have my PA set up 2 loud speakers and 2 subwoofer. Now when I play my bass I hear bass but not what I desire. My mixer board only has 80 hertz knob to adjust on my bass channel and also another EQ on the size , im guessing for the whole channels as one. My issues is that the bass in good punchy to 80 hurts but when I hear songs on my phone and play them I hear low bass sorf of like a night club bass. But my bass is note delivering low bass like that. Now do I need to add an EQ pedal so I can bring up the lows like 60 herts

[@darrenchristiephotography]

Happy New Year Joe. Thanks for this tutorial. Do you intentionally not use a HP filter on the bass buss because you know you're going to use it on the Master buss? Does it matter if I do both or is that not necessary?

[@HomeStudioCorner]

I don’t do almost anything by default. I only HP if it needs it.

[@jaajmedia2118]

My best Music teacher , how can I contact you

[@TantraJames]

I wouldn’t call 100hz mid range. For me, the low mids around 200-350 usually need a little dip.

[@arminfatol]

Very nice! Thank you!

[@mikenicholson7465]

I love mid-range and I kind of can't stand lots of low end. I grew up on lots of Beatles, Clash, and Yes and I realize McCartney, Simonon and Squire were mid-range-y, almost lead-instrument bass players.

[@HomeStudioCorner]

Totally legit.

[@NameoftheMusic]

Beatles? Up to '65, yes. Paul was using the Hofner. When he switched to the Ric, it was a different story. Mid-range, you say? Listen to the bass on Taxman, Here comes the sun, and a host of other songs, where it comes through deep and loud. McCartney did not have one signature sound. He would take each song at its own merits and create the bassline, including the sound, for that song. This is the way the Beatles worked. Everything revolved around the song. What does the song call for? Sometimes it was a mid-range bass, others, it was deep and heavy. Squire was a different kettle of fish altogether. He was essentially playing bass and rhythm guitar simultaneously, with that crunchy, gritty Rotosound tone that became Yes' signature bass sound.

[@rockwriter9054]

@@HomeStudioCorner show us all how to do a bass eq/ two notes le bass (maybe) mix of Chris squire sound amazing!

[@mattbennett6141]

Really good video man

[@AudioReplica2023]

I always go for a dynamic eq for bass. Too me you get more control and at the same time shape the tone .

[@codyinacoma]

Isaac Pizarro - I think that’s a personal preference type of deal though. And it kinda depends on what type of bass you have. Whether it’s synth bass or a guitar bass. It rlly depends on th song and how it sits with other instruments. Bc some songs using a dynamic makes it sit better but other tracks I’ve found it doesn’t need all of that and just a simple EQ is fine.

[@AudioReplica2023]

@@codyinacoma- 100% 👍🏽

[@rickbeats7898]

thanks for the video man!

[@trendyrhythm]

Pls share Indian classical music mixing techniques

[@greatestsawes9712]

Hello, that's great. I know what to do now in my bass EQs. Question: Is it good to sidechain the bass to the kick drum? A little like trap Hip-Hop... Thanks!!!

[@zachary4670]

GREATEST SaWes i know in old school rock, the kick is sidechained to the bass. So when the kick hits, the bass ducks. I enjoy using a multiband compressor in the same way, so the super low end of the bass ducks when the kick hits, but the high end stays there for definition. Use your ears of course, etc etc. also if you boost the low end, cut right above the boost. Bob Power trick right there.

[@jorgepeterbarton]

its a kind of effect albeit subtle. can work well for a particular feel. I prefer to use a 'ducker', because ducking is technically a fixed amount each time (and you blend it with the dry signal so its not silent ducking), wheras if you use a compressor, when the kick is lower volume it would cut the bass less when really you want the opposite: the kick to still cut through even if it dips due to sloppy playing or whatever. you can also just compress them together, having a similar effect, but will be more of an effect...requires taking out the drum buss tho, or as another commentor using a multiband on just the lows. multiband that way probably most natural way of doing it. its likely any mastering compression and limiting kind of does it anyway if you make sure the kick is a touch louder than you think you need.

[@wisevirginsmedia]

hi. You mentioned phase, that the bass was in phase, what did you mean and how to do sort an out of phase track?

[@MatthewNash92]

can I record bass with a sm57 ?

[@batmandeltaforce]

I have run sound at festivals and bass is something you have to adjust for every single band:) More trouble than any other instrument:) But EVERYTHING must be EQed, for every act:) BUT... you can ONLY EQ the bass while in the mix, not by itself:)

[@HomeStudioCorner]

Absolutely. But for demonstration purposes it helps to show it in solo.

[@batmandeltaforce]

@@HomeStudioCorner yup:)

[@davidkeller8084]

Is That Bass Buss, Mon. or Stereo?

[@ChaseMcClendon]

No filters?