How to Find Angles

[@jace.718]

walk us through what your doing. i’m 18 and started construction on custom homes about 3 months ago. i’m doing well and have even got a raise already. but i need to hear what exactly your doing. i feel it would be beneficial for you to walk it through with your audience

[@mfb6310]

Basically, we want to get rid of the inside little triangle corners of each end so they meet up, right? So At 00:44, he slides the right board fully into the corner pocket. He takes a long ruler (straight edge) on the left board to 'see where the ruler says 'if the piece wasn't there, we'd meet HERE'. And he marks the right board where the ruler touched it. He does the same for the other board; puts the ruler on the right board and sees where the ruler touches the left board. He marks that board. Connect the marks to their edges - cut off edges - Done.

[@saltycreole2673]

@@mfb6310 I pictured that and got it right away. I'm roofing my mud room. I needed to know how to angle the rails on the slope when attaching them to the butt plate. |‐‐‐i \?? Measure top length from plate to edge of 2"x4" sloped roof rail, mark bottom of rail same lenth, draw line from mark to rail edge top, cut. Fit like I knew all along! Thanks!

[@Kyle-vj1by]

I agree

[@hipolitoramirez424]

Hello sir I'm 20 years old tryna get into the construction field any advice or tips on how to get in or start?

[@northernmarianaislands7255]

kzbin.info/www/bejne/Z5m5YaaBmc2MeKM

[@POYOSH007R]

This video is pure gold, thanks a lot.

[@michaelvidon177]

Thanks for this. I don't have many tools. So a way to work out angles with just a set square is what I need!!

[@EireFirst2024]

Great tip. It's also good to put the offcuts back in so you REALLY understand the exercise 🍻👍👍

[@MrWhitelightning73]

Outstanding That laser on the miter saw was cool.

[@mayankatwalbroker7453]

Love your work 😍❤️ bro keep going

[@frederickb74]

Awesome Demo, Sir. Thank you🤙

[@melvinw.quinene841]

Awesome share of expertise here, very nice !

[@TheCameltotem]

No one to teach me. Thank you!

[@mariocabral3462]

Great vid, well illustrated.

[@sweetkiwi728]

Dude. Mind blown. It was so beautiful I could tear up😂. I am amazed.

[@1divemaster1]

Dude that is magic!

[@rgill3417]

You are too good. Many thanks

[@JoeWill231]

Thanks brother!! Exactly what I’ve been searching for

[@yfam0655]

This is awesome thank you!!!

[@joeorlando94]

Do you have a similar video for when the 2 pieces meet where the total angle is less than 90?

[@GeneralUseStuff]

Awesome... kickass pro tip!

[@monfli5525]

amazing demonstration! thank you!

[@PBS-nm1uu]

some explanation would be nice.

[@johnjrambo5827]

This really works

[@helloiambear5531]

Great job!

[@d.r34]

Thank you, finally.

[@wilfredcharlyekamawailuala4836]

I like that pretty simple and easy to find angles with that method great job 👍🏼 keep up the awesome videos

[@ВладанМиладиновић-н4й]

You the man!

[@AdamSmith-ze6gl]

Nice! What laser are you using?

[@don.kowalski]

ok that was fricking awesome.

[@angellas.1314]

Great video. But vocal instructions would have been better than music.

[@papergatorzfedducca7998]

Can you make a video on how to do bevel cuts on a table saw?

[@aubreyholman1951]

Sweet! Thanks 👍

[@SawsetTools]

Great method!! But wouldn't a Sawset Pro be easier??

[@OdinMcfly-vc1pg]

Im just so flabbergasted at the tomfoolery of some of theese so called professionals but here i sit holding all the wordls knowledge in my hands

[@syedasefraza]

Hey mate, I’m in need of some help finding some angles for a diy wood project. Would you be able to help me?

[@Only-one-life-68]

Brilliant 🤩

[@mfb6310]

That's brilliant!! Thank you! (62yr old gal, trying to trim out this one angled wall had me totally buggered.)

[@skydiveme52]

Great video. Thanks for sharing.

[@Jeremy-rg3bg]

I don't understand..your starting with a board already cut at an angle..I need to know how to find it with a board cut straight at both ends .???..would have help if you talked threw it and turned down music

[@Maxxis1941]

Came here to say this. Glad I saw yours asking the same. Not that it did any good for either of us. The channel owner is as silent as his video.

[@bizarrebroz3424]

Great thanks

[@dancingbear6239]

On the last cut there is no need to measure the gap. Place the piece to cut as he did. Take another piece and place it exactly as he did in the first part of the video. Place your ruler sling the edge of the second piece and overlap the first piece. Draw a line and that’s your cut. In essence your scribing the piece you want to cut.

[@Cool-Lake]

Lost me, DIY’er with little experience. But it sure looks like it works.

[@Zloner]

I am pretty sure I followed up using this method while trying to corner two 2 by 4s on an acute angle. However, I always ended up with an angle which was wider by two time the measured angle. Obviously the solution was to cut that angle by half but that took me a while to figure out. Honestly I thought I was going crazy.. how come I followed every step but came up with the wrong results.

[@jameslyon7421]

May have to watch about fifty times! No idea what I'm seeing

[@brianlink391]

1:53 Alright, you might want to consider getting a new blade. 👍

[@jimmygonzalez3659]

Ok but how can you find a inside angle with a rounded corner ?

[@bobwong6963]

Maybe a video for a contractor looking for a faster way, anyone who does this for a living has no time to walk around with two pieces of wood all day and do this bs

[@atsimas]

Yes, now let's pretend there is a wall.

[@ShawnGottii709]

Words would help

[@michaelodika2237]

What if the angle is acute

[@mervinlee7267]

Alot of complicated steps just to find a simple angle

[@thermonuclearwarfare]

yeah good luck with this technique on a ladder 20" up at the peak of my vaulted ceiling. next

[@edwinantoness4027]

Figures out the first surprised on the second...

[@ronniewilcox3976]

Made no sense plus music ruined it

[@DontCancelM3]

Couldn't have said it better myself, but hey at least he did it with confidence 😔

[@Unknown1234-vg1bi]

lol…time I’ll never get back

[@mdsloads]

Nice but I didn’t learn a thing.

[@316woodworks9]

Looks off in the last scene.

[@richardbyrd7268]

Confused the hell outta me !

[@LeahCollard]

Yea man use words tell us what you’re doing what you’re doing that way like I see it but I don’t understand. You obviously know what you’re doing just voiceover to make this better for your viewers and new builders coming to your channel for the first time.

[@echo6sierra]

What is magic about this ? Do it on a wall already up lol

[@huntcastdraw]

Repeated this 4-5x and failed every time. 🤷‍♂️ 🤦‍♂️ 😭

[@robsim4692]

I see these fancy saws of today and think back to when people were cutting wood using dinosaur teeth or the teeth of their fallen neighbors and still managed to produce product thats still superior to anything built today! Why is this the case? Because fir some reason age is the determining factor rather than quality!

[@thomaslapointe7657]

That's not even helpfull because of the '3 dozen steps' that are easily made out of order and needs a blue print to start!

[@roxydog2004]

What's up with the music? If you want to make a how-to video do it without music, please. Next time talk us through the process , thank you.

[@campskytent]

I mean. Cool music and all but….

[@melvis2017]

beautiful job but awfull music

[@johntuohy1867]

Scrap the soundtrack

[@ArgonKripton]

nobody knows what he is doing without explaining how !!!??

[@jayperez6142]

What do you mean? He’s literally showing you what he’s doing. It doesn’t get much clearer than that tbh.

[@ArgonKripton]

@@jayperez6142 na u r jackasshole u dont get it he should speak while doing things

[@MrLeebooher]

Do you really have to have that f'xxking music in the background?

[@djalgoriddim]

Yeah, had to hit mute. Don't need rock guitar while I'm trying to learn Geometry

[@acemcflanders4904]

Enough with the obnoxious music already

[@Maxxis1941]

Solid thumbs down. No step-by-step instructions describing what he's doing and why. Only 37 steps with obnoxious music. I want 5 minutes of my life back.

[@edtomas1068]

Couldn’t understand anything 👎👎👎👎

[@Kewchu]

no explanation just crap music

[@jamiemichael4190]

Why do people make videos talking about what they r gonna do then when they start doing it they say nothing. Should talk more during the explanation than they do during the introduction. JS