How to Fishtail/ French Diamond Set

[@jamesbedoya1724]

The audio is completely gone after 0:25

[@lowccperformance4059]

Probably copyright smh. I thought it was just me

[@Vouleno]

What happened to the audio? 0:30

[@id1352]

Noooo sound ???

[@Celestial_Reach]

Naw, most people are driven away by sound. If you want a walk through, he has a paid course, and while I can't afford it, from what I learned from these free videos I have a feeling they are worth the it

[@paulquach604]

Thank you for sharing these videos. Amazing work.I am a new aspiring jeweler!

[@setting-the-standard]

You are so welcome!

[@duelenigma7732]

thumbs up , retired Canadian jeweller , thanks for your video .

[@nurbekrahimov447]

Juda ham ajoyib hamkasb videolaringiz menga juda yoqdi

[@Celestial_Reach]

thank you for this! this is how i taught myself to make jewelry is thanks to people like you! you rock!

[@setting-the-standard]

You are so welcome!

[@Celestial_Reach]

@@setting-the-standard its funny, ive watched this and the free castle video several times. super helpful. tells me that your paid for content would be worth every cent if i can ever get to affording them. thanks again for this free version, i come back to these alot to try and glean something i missed last time

[@NatalinoOurives]

Belíssimo trabalho amigo, sou iniciante na ourivesaria e a cravação e uma das coisa que admiro mais nessa arte. Forte abraço aqui do Brasil. Obrigado por compartilhar um pouco do seu conhecimento, grato!

[@staceybrown686]

This is great. Had no idea you had a KZbin channel.

[@makumegane9628]

Good afternoon, it looks cool, tell me what the sharpening angle should be?

[@vjm6238]

Hi . Very beautiful ring and beautiful work, cat you share what tools you are using? Is this engraving machine or hand peace Foredom chisel? Thank you. VJ

[@rosaliegosalie]

Fellow Canuck and new sub, thanks for this video.

[@franzsirvas4823]

You work with precision. Thank you

[@josetonon5726]

Trabalho maravilhoso. Obrigado por compartilhar seus conhecimentos. Parabéns pelo seu trabalho.

[@SoklengjeverychannelKh-ws8le]

Hello, I watched your diamond planting video, it's really beautiful, I really like it, thank youI'm also better than Cambodia.

[@SergioTruter]

keep up the work . we watching

[@diegoarmandooo381]

What tool did you use for splitting the prongs before beading?

[@dianabuenahora]

Soooo Beautifulll Master!!

[@setting-the-standard]

thank you!

[@verycooljay]

What kind of tool is that. Why they split the prong like a knife cutting butter?

[@manitorres6724]

That is a craftsmen . I sure would like to learn ! There is a video How to make a Faberge Imperial egg which too is my goal to achieve creating with installation technique like demonstrated here in this video !

[@setting-the-standard]

Thank you so much!! keep at it you'll get there

[@engraverhand]

Great video! :-) Hopefully be able to take a class one day..

[@setting-the-standard]

I hope so too! Half the day I learn from you, other half we switch! Your engraving is next level!

[@jwon5614]

What are you using to hold the band while you drill? Excellent work and video

[@madesigns94]

What is that brass looking collet that you hold the ring with when engraving the sides? What is it called and where can I find them? Thank you!!

[@Makdaddy-q4y]

I insanely maticulos work it's like drawing on a pin head

[@KaiSimolaHandEngraver]

I watched one reel, and tried to get an answer several times about how much a video of it costs, but this one didn't bother to answer at all!

[@huayra9505]

بژی وەستا ، کارێکی زۆر چێژ بەخش بوو ، سپاس

[@amywhite7114]

Love your videos.. thank you for sharing

[@setting-the-standard]

Glad you like them! thanks so much!

[@roberhancaroglu9069]

Awesome master setter

[@kitchenkarma117]

I just learnt fishtail at work the other day.. a little different to this method but its interesting to see it done other ways! Will try out this way next I think! Also what's the angle of the graver you use at 5:30?

[@kitchenkarma117]

and is the splitter tool you use just steel? Like an old bur?

[@blagoyyanchev8083]

Hi Great video enjoyed very much I would like to ask you what kind of micro motor you using with what torque and does it maintain the torque on all ranges of speeds? I just wonder which micro motor to get myself Thanks

[@setting-the-standard]

I am a big fan of the marathon handy eco for value, that's what Im using here. 7.8ncm of torque, its very nice to work with. if your budget is higher I really like the Badeco but its considerably more

[@blagoyan8933]

Hi Thanks for your reply I still can’t choose between Badeco or NSK What is your opinion do you have any experience with both of them Greatly appreciated Thanks

[@setting-the-standard]

Ive used the NSK ultimate XL and the EVO and the Badeco is better than both, its amazing. @@blagoyan8933

[@blagoyan8933]

@@setting-the-standard Thank you

[@SnacksMpls]

What kind of dividers are those?

[@eder35943]

Beautiful job 🔥🔥🔥

[@sni777pe]

Где звук??????

[@ikbo]

if you are using 1.3mm stones how wide is the band you are working with?

[@imbored4615]

If you keep being active you are definitely gonna blow up. Have you tried promoting some of your videos on reddit?

[@setting-the-standard]

Thanks so much! I will continue to be active for sure! More active on the long form side too

[@setting-the-standard]

Never tried on Reddit, wouldn’t even know where there to go?

[@Lightning-Man-1954]

At the 5min plus mark. Are you using an Onglet...push Graver?

[@setting-the-standard]

V gravers always, and GRS graver smith

[@arsavirkurucay8788]

grs carbade right?

[@Дмитрий-ф8ы8ш]

Its a 60 degrees?

[@UrBrother_711]

How much wider than stone should the band be ? Thank you 🙏

[@antosharboonian6110]

i'd say anywhere between 0.5mm to 1.2mm

[@UrBrother_711]

@@antosharboonian6110 thank you 🙏

[@antosharboonian6110]

now i've tried making my own ring and believe 1mm on each side will do

[@ikbo]

the split prong with u-cut is also called a french setting? Also curious why is it called french setting to begin with?

[@arsavirkurucay8788]

wonder that also.most prob started at France...

[@paulangelo776]

Does it matter if it s gold, white gold or Platinum to do this fishtail setting?

[@setting-the-standard]

it does not, no. silver is trickier as its so soft but still possible

[@rakeshdas4326]

I am a diamond setter

[@tsmith4338]

Newbie question: bought a set of hart burs and they're all 2%-3% under the rated sizes. (ex: 025 = 2.43mm) What tolerance should be required in burs?

[@setting-the-standard]

This is normal. You’ll find with Diamonds and gemstones though unless you pay a premium, most of those don’t come in exact calibrated sizes anyway, so you’ll need to learn to cut a 2.53 hole with that 2.43 bur

[@setting-the-standard]

Basically assume all holes will likely need precise adjustment to get a good seat, assuming your bur is 2.5 and the stone you’ve ordered as 2.5 is a great way to run into trouble. Cz are nicely calibrated but move to cheap gemstones and sometimes those can range from 2.35-2.65 depending on how little your supplier cares

[@tsmith4338]

@@setting-the-standard Thanks. I had no idea it was -that- important to match diameters (I've got LOTS to learn).

[@BenWilsonJewelry]

0:25 Its all about.......WHAT IAN

[@cpayne1757]

No sound, you should repost the video.

[@aldo934]

Let’s say the stones are 1.5 mm what distance do you make from one hole to the other?

[@setting-the-standard]

1.55

[@aldo934]

No way tho, that would mean there would be barley any prongs. You also make the holes deep so how doesn’t the stones hit each other?

[@bishopinstrumentsbows6530]

Great stuff.

[@ivanaponte2566]

Excelente

[@Lightning-Man-1954]

Wow at the 10min mark, I can feel my irreparable Rotator Cuff ligaments screaming 😱. I'll have to use the pneumatic or other gas system to sett.

[@setting-the-standard]

I dont think you'll go back to hand push after pneumatic

[@bc_jewellery1]

Great video 💪

[@setting-the-standard]

cheers man!

[@1AEROSOL.1PUFF]

I'M TAKING THIS VIDEO TO MY JEWELER, I WOULD LOVE TO HAVE AN ETERNITY RING IN WHITE GOLD 😊

[@setting-the-standard]

Why not come right to the source? [e-mail]

[@GTRJewelry]

"Its all abou" *cuts into silence* 😂

[@vishalsing5041]

Job vacancy for diamond setting

[@jenifriend1]

😢😢 I can't hear it... Best video though

[@tattoobaker]

I just ordered a vevor Pneumatic jewelry engraver. It looks like a knock off of the GRS for 1700$, the one I got was 300$. so what im asking is if I get nicer high end engraver handtool, will it be better then the cheap ones it comes with or if I get top made engraver tips? thanks for your time. And if im on the right track, what handheld and tips should I get?

[@Ninyaho]

Tell me how many strokes per minute ur machine have

[@tattoobaker]

@@Ninyaho it says 400-8000 strokes per minute

[@LondonRocksJewellery]

Fabulous

[@YusifNesirli-q1l]

Vaou love you from Azərbaycan🇦🇿

[@Tkdrl7270]

멋져여^^ 영상 감사합니다.

[@genef2226]

Uss Sensei !!

[@nelsonsv7024]

Buen video, para mostrarselo al joyero que arruinó mis anillos de boda. Tal vez asi aprende un poco.

[@victorark2926]

No sound????

[@hr.brillant9026]

Sehr gut 👍🏻

[@setting-the-standard]

danke schön!

[@GennadiyGold]

У этого парня смело заказывайте украшения. Потому что он перенял опыт у лучшего в мире преподавателя.

[@stanislavzigraikh7522]

👍…🔥

[@vniciusribeiro2610]

Te amo

[@gevorgmanvelyan5111]

ապես երկար կյանք

[@EugeneZinoviev]

Barnard, you set the stones very low. this is not entirely true. It is enough to put quite a bit below the level of the surface of the workpiece. And maybe even on par.

[@setting-the-standard]

Yes, in the longer video of this Eugene I explain what happened. Was using a new brand of burs I was not used to, so all are even but a little low I agree. I thought it was a good opportunity to show that all is not lost if you drill a little low

[@Jtf_2002]

Cool video too bad no audio!

[@jeromethomas2650]

Waw