How To Fit Out Your Canopy ON A BUDGET! // Cheap Canopy Fitout Walkaround w/ Tips

#4x4 #toyota #4wd
Today I'm going to show you around my budget conscious canopy fit out. This is everything you need and nothing more.
MyCoolMan Fridge: tinyurl.com/MyCoolManFridge
Ecoflow Delta: tinyurl.com/ecoflowdelta
Equipment I Use When I Go Camping:
Floor Liners: tinyurl.com/floorliner
Front Runner Wolf Pack Pros: tinyurl.com/frontrunnerstorage
MyCoolMan Fridge: tinyurl.com/MyCoolManFridge
Tray Rack: tinyurl.com/FRTrayRack
Spinifex table: tinyurl.com/spinifextable
Swag stretcher: tinyurl.com/Swag-Stretcher
Bluetti Solar Panel: shrsl.com/44xnd
Bluetti Powerstation: shrsl.com/3yzvr
Ecoflow Delta: tinyurl.com/ecoflowdelta
Cargo Box: tinyurl.com/slimcargobox
Fiskars Axe: amzn.to/3FiDhd7
*Coleman Fan/Light Combo: amzn.to/3mYtbrB
*Buck Knife Alternative: amzn.to/3l7oKdf
Ram Suction Mount: amzn.to/3mHtbfk
Ram Mount Arm: amzn.to/3l7oKdf
Ram Mount Garmin Holder: amzn.to/3JyzxGX
Garmin In-Reach Mini: amzn.to/3JdBCGI
GME UHF Radio: tinyurl.com/2wattuhf
*GME UHF Radio 5 Watt: tinyurl.com/5wattuhf
Light and Bug Zapper Combo: amzn.to/3T7FP3e
Thermacell E55: amzn.to/3T8x5de
Thermacell Refills: amzn.to/3T8D5md
Fiskars Shears (bigger): amzn.to/3yx1cBC
First Aid Kit (alternative): amzn.to/3mNc63s
Rope (alternative): amzn.to/3Jdd54L
GSI Outdoor Knife Set: amzn.to/402CJzJ
*New GSI Full Cook Set: amzn.to/3ywB3D3
Clear Top Canvas Bag: tinyurl.com/oztrailcanvasbag
Gas Stove: tinyurl.com/alternativebutane...
Coleman Tritan Dual Burner Stove: amzn.to/3Z2accG
Kincrome Spanner Set: amzn.to/3FdhLX2
Kincrome Socket Set Alternative: amzn.to/3ZYlQGr
Hammer Alternative: amzn.to/3FlhvFt
Toilet Paper: amzn.to/3FlhvFt
Lantern: tinyurl.com/LED-Lantern
Rechargeable lights: tinyurl.com/Rechargeable-Lights
Powerbank lantern: tinyurl.com/lanternpowerbank
*This video is my opinion only. I am not a professional and anything I mention in this video is specific to my situation and are my thoughts. Please consult professional advice before attempting anything presented in this video.
Keywords: Toyota, 79 series, Landcruiser, camping, touring, 4wd, dream car, truck
0:00 Introduction
0:11 Video of Canopy
1:06 Overview
3:12 Structure
7:29 Ease of DIY
9:26 Locking
10:43 Undertray Boxes
13:26 Water Tank
14:26 Trundle Drawer
16:01 Rear Mounted Accessories
21:06 Roof Mounted Accessories
24:39 Cost and Conclusions

[@caseyhopkins6299]

Honestly those budget brass monkey fridges perform amazing well. 40 plus days in the NT and -20 no problems all day I’ve also got an upright one not so good.

[@NorthOz]

So true! I couldn’t fault it for the price. It was around $200 and it did the job for me for over a year

[@jamesleary6712]

I certainly hope you never have an accident mate them occy straps ain’t surviving that

[@bill13690]

Hi Mark. Great video that you've set up there today, mate. Keep up the good work. And I hope you do have good holidays to enjoy in the future. Regards, William.

[@NorthOz]

Thank you William. I hope you have a good day 👍

[@bill13690]

@NorthOz Anytime, mate. I hope you have a good rest of the weekend too.

[@michaelgceight9698]

Nice one mate

[@NorthOz]

Thanks mate 🤙

[@notsnakez1725]

Hi Mark, great video. I am doing a similar set up on 76 and wanted to see if you have to use 12mm ply or 18mm marine grade for the base. Thanks

[@NorthOz]

I used 12mm standard ply but this was not enough to hold any weight without a support under it. Marine ply is stiffer so depending on the length of your base you may not need a support. I recommend 12mm marine and supports under it which could be bits of scrap wood to support whatever weight you are using. Thanks for watching. Let me know if you have any questions. Shoot any questions through to my Instagram. Happy to help

[@theabombination1]

With your tie down points, was there a reason you didn't just use a threaded eyelet with a square washer into a channel nut directly, instead of mounting another rail to the strut? Great video mate

[@NorthOz]

Hi mate, good question. Unfortunately I couldn’t find the correct eyelets so I went with this instead. Gives me a bit more flexibility for mounting the fridge but will probably swap these out for an eyelet later if the tracks don’t stay put. So far so good though

[@richardwalsh5570]

I thought the fridge at the headboard would have got the weight in front of the wheels for stability rather than behind the wheels Mark?

[@NorthOz]

Good question Richard. The fridge weighs less than the drawer and the power setup that sit forward of the axle. The fridge only weighs around 20kg

[@richardwalsh5570]

@@NorthOz cheers

[@Mikelennon78]

How about insulation on the ceiling to reduce heat.

[@NorthOz]

Hi mate, I don’t find it gets too hot in there surprisingly. I may stick some foil board in there when summer comes back around but won’t be rushing to do it

[@WDMTAdventures]

Do you know that you said DRAW 38 times? Nice draw by the way 😅😅😅😅

[@NorthOz]

Draw. Make it 39 😏

[@WDMTAdventures]

@NorthOz lol, you're a funny man... your trucks coming along great. I've watched every episode