How to fit side steps to a Land Rover Freelander 2 / LR2 - PART 2

[@hughmarcus1]

Useful video. However, I’d make 2 comments. Firstly I’d argue that none of the bolts should be anything other than finger tight until the whole assembly is in place (a ratchet ring spanner could be used to tighten the ones on the sides of the vehicle), that would eliminate the need for all the hammering to get the steps on. Secondly, on a job like this everything should have a dab of copper grease in case it needs to come off at some stage in the future.

[@L663]

Hi - good comments so i have pinned this comment to the top to help others. 10 points to you sir !

[@grahamroxuk]

Agreed

[@Caroline-mp7zv]

my partner fitted these steps last week thank goodness for this video was a huge help otherwise it would of been a struggle. grateful to the people that take the time to do these things to help. thank you

[@peterlynch2143]

Thank you very much for the video. It saved me a lot of time trialing the brackets to where they should be !

[@TheBionicbone]

Great video, slow and steady. I agree with some comments, like only finger tighten the bolts until everything is fitted. But I found everything I needed from this. Thanks for taking the time.

[@mikeclarke4893]

Excellent Video. I brought these running boards off EBay and the instructions were rubbish to try and work out. This video was very easy to watch and I was able to fit the boards just following the video 10/10 thank you

[@adrianmayhew5853]

Great video! This and the one for the mudflaps were invaluable. Cheers

[@MadTitanGamer]

Why the fuck would anyone dislike this video? Informative, helpful, down to earth and no dodgy music playing in the background. Not attempted this yet but definitely saved 👍🏻

[@L663]

There are a few reasons people would dislike the video.... 1- Its filmed on our old camera with a bit shake 2- There are no pretty girls 3- My jumper is offensive to look at 4- They dont have a Freelander 2 5- They are my competitors 6- They pressed the wrong thumb thingy by mistake.

[@MadTitanGamer]

powerfulukltd LOL loved the last couple, seriously though it was a damn good informative video and pretty girls, great idea 😉😂👍🏻

[@yorkshireladable]

Great Video, Really well explained...You made it look so easy to do..Even for a novice do-it-yourselfer like me.

[@markwildridge330]

Very good video it’s a job I’m doing this weekend and I now have a lot more knowledge thanks

[@ЕвгенийГунькин-ы1ъ]

Everything is simple when you know how to do. Thank you very much from Russia.

[@EtheB1]

An excellent instructional video - thank you!

[@joewatts5074]

Great video really helped you made it look easy so I had a go myself with great results Many Thanks

[@L663]

Hi - great glad it helped - its not quick but its straight forward enough !.... now time for more accessories.... www.powerfuluk.com/vehicles/land-rover/freelander-2.html

[@danielkavon6228]

Great guide, thank you!

[@L663]

Glad it was helpful!

[@eazydraw4681]

Storming videos these 2 keep up the great work

[@campingroadtrips]

great vid, so are you selling them, because i cannot find them on your website :( thx

[@Davinderbys64]

Can these be adjusted as the Freelander Dynamic I’ve purchased the bottom of Door is catching the board.

[@VinceChia1971]

Thanks for your sharing videos~ I will be try it! Greeting from Taiwan.

[@graysclassicsuk]

Nice video old chap, beats the living daylights out of a picture or a manual... I will be fitting these.

[@jackfisher2668]

Gordon Galbraith might say ok loads but what a helpful guy

[@bluefell4134]

you didnt mention replacing the 6 hold clip that you removed first of all.. are they no longer required?

[@maybelberry10]

How long should it take experienced qualified mechanic to fit ?

[@bernardwood6070]

0:16 just wondering are these clips there when you take them off originally? I bought some side boards from a wrecker and am missing some of the clips, so I was just wondering are the clips there when I remove the panels to cut the holes Thank you

[@L663]

The clips should be there on the original car - they are 2 part clips I think its these www.powerfuluk.com/yellow-white-plastic-wheel-arch-door-moulding-clips-for-land-rover-freelander-2-10-pack.html

[@bernardwood6070]

@@L663 can you remove them with the ever so handy removal tool, the wreckers gave me some that they took off of the car with the side boards but no little yellow bit on them (mushroom) like bit they are lonely the same as the white ones on your site but black

[@StreetNavigator]

I’ve just fitted mine recently but the middle brackets at the back never lined up with the front ones on both sides it’s about an inch off alignment, they’re all in the right places number wise but wondering if I should swap number 2 and 5 around, any ideas?

[@Tizzy_p]

W9black Tiger I had to use a different boot hole for the middle bracket to cill as it was a millions miles away but just be careful as the door will rub the step

[@samrvy1samrvy196]

Thank you

[@ScragNath]

Great Job there.

[@therainbowbus]

Are there any torque settings for the brackets?

[@samrvy1samrvy196]

Can we buy the brackets separately

[@L663]

Yes these are available from Land Rover PN LR002762 around £85 + vat

[@djordje180uk]

does the rubber seal flaps at the bottom of all your doors slightly scrape the side steps?

[@L663]

Hi - yes it did just touch as i recall

[@landieman6044]

are these the ones Bearmach?

[@daveburten7535]

Anyone know how much the sidesteps weigh?

[@Afterburner0011]

M8 bolts, that's the bigger bolts Kate yea. Lol

[@abarnes3399]

OK !OK?