HOW to Fix a Bobcat that doesn't move

if she runs and arms work but doesn't move check this filter bobcat sold for 7500 after this fix

[@ejiv6034]

This filter was my problem no forward or reverse movement but I had lift and tilt. My filter was about five times as bad as yours in the video. I had to order mine in from the local Bobcat dealer took them about a week to get it and I paid for shipping so it cost me about $26… thank you so much for your video !

[@ejiv6034]

Oh by the way my machine is a 643

[@t.voi...4494]

Thank you for making this video! Our bobcat sat for months because my husband couldn't figure out what was wrong with it. I Googled, "why wont my bobcat move" and I found your fix!! Keep making your videos cus there are people out here that need em!! Thanks again. You're a money saver!!

[@DannysCam]

Glad I could help I did a cylinder rebuild video on a t190 same process on all bobcat cylinders feel free to check it out

[@TheSweatEquity]

Man this was a life saver! Thank you for doing this video, I talked with tons of bobcat mechanics who only wanted to talk about the pump being dead. Luckily I only went through the trouble of replacing seals in one drive motor before I saw this video. Thanks again!

[@DannysCam]

Glad I could help

[@artisanofsteel8850]

Dude! Thanks for posting this. I was told by a reputable mechanic my bobcat was done. I ordered the filter, replaced it, and she moves again. Mine is a 632, but the port block and filter are very similar.

[@CodyJokesss]

I wonder if he was willing to buy it off of you for cheap before you found this video

[@dennisiverson3047]

I have older 630 worked like a charm!! Thanks.

[@tf-lv4zu]

i just got a 743 that wont move. unfortunately it has a different hydraulic setup to your 743, it has a higher serial number of 15001 and above. have you ever used the towing tool (mel 1179-2 ) that lets you move the machine slowly by replacing the high pressure relief valves with tow tool pins.

[@BradleyKang23]

my 742 doesn't have that square manifold box on top of the pump, the pump below looks similar though. Is there another place an internal filter would be?

[@eliz3206]

I have caterpillar skid steer, parked last week start it in few days, engine runs but doesn’t move, the bracket wasn’t laying down all the way on the ground. Please help. Thanks

[@ranchero302me]

Sometimes I gotta check my O ring to make sure I haven’t blown a gasket with all this shit going on lol. You said nipples lol yeeeehawww

[@darinday6930]

I have the same movement issue on a 722. Any Ideas? Is there a similar filter somewhere?

[@ezamor4]

What's the filter called and does this apply to the s70 as well ??

[@MrLipsotis]

I tried to remove this filter and the threaded end ripped out of the filter attempting to do it the way you have… 2 questions - 1. Obviously it’s not ok to put it back together and run like this… 2. How do I get it out as I will order a new one!!! It won’t move with anything.

[@Lsxpwr08]

I have A 463 with the same symptoms, arms work but doesn’t want to move forward or backward. But I don’t believe there’s a screen there. I changed the filter but still nothing

[@kimbrown9366]

Hi! Great video. My Bobcat 853H starts but nothing moves. Arms won't move either. Someone was moving dirt off a pile with it and then it just stopped moving, still starts and runs but nothing moves at all. Any and all ideas appreciated. Think the fuses are all ok and it has hydraulic fluid. Very much a beginner here so thank you in advance for your suggestions.

[@DannysCam]

Hmmm so no hydraulics at all, any sounds id check the belt between the engine and pump could be bad or slipping

[@benzw2505]

Did you get it figured out? I have an 843 and there’s a universal joint between the engine and hydraulic pump could have possibly broke

[@cm5838]

I’ve never owned a skid steer or worked on one aside from greasing one before using it. I am a mechanic though an atv mechanic but I am thinking about buying a dead 743 or 745 something like that, definitely 74 something. Anyways on atv’s I use clymer manuals, on vehicles I use haynes manuals, is there a repair manual for these that is not written for professional tractor mechanics?

[@DannysCam]

I got one for a 743 I think ebay has em

[@danielingle9381]

What filter is this called?

[@artemartem1134]

Hey I have a 732 model and want to see if this is an issue or not. The machine moves but has been pretty abused over it's life so I want to see what this filter holds. How can I prevent losing all my fluid when checking this? Cap the valve body and hose when removed? Thanks

[@blitz8619]

Hi there again. I'm actually gonna do this tomorrow. See if it gets fixed.

[@artemartem1134]

@@blitz8619 let us know! I need to do it on my 732 still.

[@mrc3584]

@@blitz8619 did you do the job?

[@robertcallahan1105]

I have a bobcat that’s filling up the chain box in the bottom with hydraulic fluid checked both drive motors and it’s not bypassing by them think it could be the hydraulic pump seal have any ideas

[@scironworks]

Motor carrier seal on chaincase side is bad. To find it is a really big job, but it's the only thing that'll fill the chain case.

[@stephensmotts8290]

I've got a 731 that moves intermittently. I've tried to find the plunger relief valve you spoke about. Apparently it's a discontinued part. Any idea what to do from here ? Open to suggestions

[@DannysCam]

First off subscribe and like my last 5 videos, second does it not work once it gets hot?

[@joserochaflores3859]

Tnks man

[@calebmarsee9214]

I have a 743B that won’t move, but the sticks have pressure and makes grinding noises if you try to move it. Bucket raises and tilts fine. Any ideas?

[@gregbannish8423]

Did you check that the auxiliary hydraulics are turned off? Do this by moving the right steering lever inward.

[@Dishtech48]

So no show it worked?

[@masomaslin6396]

would this cause my 643 not to move forward or backwards if not any idea where i should look thanks Adrian from Adelaide sa Australia,,

[@DannysCam]

Any noise reach behind engine see if couple is still attached do the arms work

[@masomaslin6396]

@DannysCam yes arms work, bucket tilts, and opens wants to move forward and back but not sure what's happening

[@oiu7890]

did the new filter fix it?

[@DannysCam]

Yes

[@waynemurphy7394]

Good info ! terrible camera work , too much movement !

[@sixtotigres4153]

So u fix the problem ?

[@DannysCam]

Yes

[@thesunflowchannel1995]

Bro I got the same machine for 3k and it has the same issue

[@DannysCam]

Just remove the filter for testing once fixed and you paint it you can get 12k now prices crazy high

[@thesunflowchannel1995]

@@DannysCam For real man I got a great deal on it, does need paint, already ordered all new filters decals I’ll fix leaking lines and paint is all it needs.

[@artemartem1134]

@@DannysCam is this same filter on a 732? also I'm assuming you need to work fast when replacing this or all the fluid drains from the system?

[@bobcat8439]

Good looking

[@DannysCam]

Thanks

[@bobcat8439]

got a bobcat 843 the control valve started leaking really really bad so instead of fixing the 843 I bought a little 463 bobcat from a Italiano it's better than the 843

[@DannysCam]

@@bobcat8439 fix that 843 they still got value I sold a leaking 843 for 8k once

[@bobcat8439]

@@DannysCam I recycled pallets in my yard the 843 leak so bad I had dogs in the yard Ibotta 463 little bobcat it works better then I just bought a 440 b bobcat for backup

[@bobcat8439]

@@DannysCam from Little Italy New York I'll get to it back is 440b

[@LeonidesNogales]

Draduccion.en.español