How To Fix a Dewalt Framing Nailer: QUICK & EASY!

[@cameronwong7608]

I'm a low to medium skilled DIY'r and when my Dewalt nailer started making the same noise that you showed at the start of the video my heart sunk thinking my nailer was totally broken. Thanks to your video I feel much better that this will be an easy fix!!! Thank you so much for the great informative video. Liked!

[@CollinsCountry]

Excellent. I’m glad I could help ya out. That’s why I put it on KZbin. Thanks for watching and have a blessed evening.

[@BrainstormSnackAttack]

And just like that you save the day and money!! Great video James!!

[@CollinsCountry]

+BRAiNStORM CHALLENGES Thank you!!!! I’m blessed to have James a spouse. He really can fix just about anything and it does save us SO MUCH MONEY!

[@queefasaurus83]

I just bought a new one today but before I put my old broken gun in the box to return it, I’m going order these parts and do it myself. You took all the intimidation out. I just needed to see it done. Thanks man

[@CollinsCountry]

+@queefasaurus83 do it! And welcome to good luck!

[@dpaulsen1]

I bought this nail gun as we were planning to renew all the fencing in our back garden. As this involved 19 double slatted fence panels, 10 of which needed to be cut down in size, we knew there would be a need for a great kzbin.infoUgkxHQsUrwNr5GQrnx9V4xDdUr56qxwuiBHt deal of re-stapling the wooden slats to the wooden framework. Each alteration required the re-stapling of 62 wooden slats with double staples. Prior to starting the work we ordered sufficient additional staples as per the instructions with the gun.The gun performed fantastically throughout the entire project with no jams of misfires. The adjustable power was excellent allowing the staples to be fired into the 8mm slats to the correct depth. For the price paid this was a bargain and it proved itself to be so reliable and versatile making an arduous task much quicker and professional. I cannot recommend this product highly enough and it will be used on many other projects in the future.

[@CollinsCountry]

+Danielle Paulsen 👍🏻

[@Ishkatan]

I heard about the springs and this is a great video showing what is involved.

[@CollinsCountry]

+Ishkatan Thanks! Glad you found it helpful!

[@TheCraftyCrowShow]

“Put your purse down and pry it out by hand”. That’s the most awesome quote I’ve heard in a very long time 😂😂😂😂😂

[@CollinsCountry]

hahahahahahahahahahahahaha! As you know, James is very quiet! When he speaks, it's usually worth listening to haha!!!! I laughed so hard when I was editing this video! :)

[@TheCraftyCrowShow]

@@CollinsCountry he snuck that in like a Ninja. I even had to rewind it before I made a comment to make sure that’s what I heard. That needs to be on t-shirts and signs. Especially if you all ever do merchandise

[@CollinsCountry]

+The Crafty Crow Show 😂 yes it does! I might make him a shirt that says that actually. Love the idea. Hilarious!!!

[@ariekorevaar1669]

Thank you. Same nailer, same problem here.

[@CollinsCountry]

+@ariekorevaar1669 hope it works for you!

[@kodiham7532]

Good to know Thanks!

[@CollinsCountry]

+Kodi Ham, you’re welcome! Hope it helps! :)

[@charliscruz4534]

Where to get the piston or which one is compatible? please help me

[@CollinsCountry]

Hey. The link to the kit that I purchased is in the description. I honestly don't remember if I had to purchase a piston. It has been so long since I fixed this... If I replaced the piston in the video then it came in the kit I bought online. I hope this helps! If you have any more questions let me know. Good luck!

[@buildgrowplay]

nice work

[@CollinsCountry]

+Build Grow Play Thank you! :) We are slowly making progress…

[@buildgrowplay]

@@CollinsCountry looks pretty quick from here

[@CollinsCountry]

+Build Grow Play Well thank you! :)

[@chasegreen1871]

Thanks man!

[@AndrewF430]

My dads one jammed I just took out springs and repositioned it seemed to fix it since it was really only a month old rekon it was just a small spring jam thanks

[@CollinsCountry]

+AndrewF430 Nice! Glad you could fix it. I can’t wait until my boys are old enough to fix my tools haha. Your dad is lucky!

[@jeffharding8759]

Great video, thanks so much it fixed mine eeasily

[@CollinsCountry]

+@jeffharding8759 awesome! And welcome to

[@review_maniaz]

Brilliant. The exact problem I have with mine. Is there a link to the parts please? Thanks

[@CollinsCountry]

+Alec Ransome Yes. In the description:)

[@petermckay2744]

Great help!

[@CollinsCountry]

+Peter Mckay Welcome!

[@danteice2087]

How long did you use the tool before the tool failed? It doesn't even look old, my dewalt roofing nailer keeps misfiring right now and its pretty much brand new

[@pattoroy3979]

Where can I get the nailer kit and the parts number??

[@scuddrunner1]

I have one and I'm remodeling a restaurant over the water in Tacoma. Today I came so close to tossing that POS in the water. I chilled out and thought to myself to see if there's a fix on youtube..............Thank you!! My $300 nail gun isn't swimming with the fishes. I'll use my Hitachi till the parts arrive. Does your gun sink the 16's? I didn't know there was a repair kit. Thanks again!

[@CollinsCountry]

No problem!! I was in the same boat as you building the house!! I was ready to toss that sucker. Yes mine sinks 3 1/4 16penny nails. Also sinks them in cured 60 year old white oak although it has a nasty kick back. But does drive them. Thanks for watching and good luck!!

[@edgarestrada1146]

Great video mine does shoot unfortunately all the nails go in halfway and bend at a 90 degree angle any ideas? Gonna open it up tonight and see what I can figure out that's causing it. I have about 50K worth of tools my dad left me since he passed. I want to make sure I can use them in all of my DIY's projects. Already ordered the repair kit.

[@CollinsCountry]

Sorry to hear about your father’s passing. I get 90 degree bends when I have a jam but also could be your nails. Might want to try another brand. Check the part that comes in contact with the nail to drive it. I would say there is a possibility that it could be damaged. Good luck!!

[@edgarestrada1146]

@@CollinsCountry Thank you I’m embarrassed to say this but I was the wrong nails. The one’s I tried were 20 degree instead of 30

[@CollinsCountry]

@@edgarestrada1146 embarrassing or not I’d say that was your best bet. No repairs are needed. 👍🏼

[@robhardy1109]

This gun HATES clipped heads, extra weak heads like griprite will break off, causing the hammer to hit the head of the nail below. Magnums or other full heads/strong clipped heads like gripfast really make a difference

[@gabrielrojas8718]

Mine doesn't even make any sound...😢

[@robertgibbs5022]

ty for this

[@CollinsCountry]

+@robertgibbs5022 welcome!

[@allenshane34]

Deff helped me out my gun isn’t James out not shooting or anything but my end cap piece is loose after it took a fall from 10 feet

[@CollinsCountry]

+allenshane34 dang. We have also dropped ours a few times, but never 10 feet. Glad the video helped you.

[@louisfroment1879]

thanks a mill👍👍

[@CollinsCountry]

+louis froment No problem. Hope it helps!

[@free2binnh]

I have a brad nailer that just stopped working, had only been used a few times. Could this be the problem. Will have a look at it.

[@CollinsCountry]

Usually it takes several thousand nails for this to be a problem with the springs. I’m not sure what could be wrong with your nailer. Check battery obviously. Sounds like it’s new so you should be covered under warranty still. Had this happen to a drill for me once. Good luck!!!

[@kayleemartineau9113]

Mines flashing a yellow light what would that be?

[@CollinsCountry]

Hey! I wish I knew what the light was from but I honestly don't know. I have not experienced that issue yet.... I would say to skim through the manual. It should tell you. If you don't have the manual you could call the Dewalt customer service number to see if someone could help you. They would know. Let us know if you do figure out what the yellow light means so we know if it happens to us. Thanks!

[@elporquedelascosas8373]

Is the piston that is stuck

[@canlam5697]

I have the problem with the gun fire and nail in only half way . It doesn't nail flush. Nothing broken inside. I have no clue what is wrong with it.

[@CollinsCountry]

Hmm that’s an odd issue. Check to make sure the switch at the bottom of the nailer is set to 2 (this is the max power setting) and then at the top there is a yellow dial in front of the spring close to where the nail comes out. That adjusts the depth that the nail will shoot. Hopefully you figure out what is wrong.

[@canlam5697]

@@CollinsCountry I set to level one and level 2; make to difference. I wonder it the solenoid that pull the wheel down to engage with the hammer is weak and not allow it to fully engage for maximum nailing? The other issue i can think of is the motor doesn't spin fast enough. I have not seen anybody have the same issue as my.

[@CollinsCountry]

@@canlam5697 you should hear the motor wind up louder and faster in level 2 than in level 1. If you hear no difference then I’d say that’s your issue. Hopefully this is something that can be repaired under warranty.

[@DavisMichael-wx5mp]

It looks like we are having the same issue. It sinks number 8 fine but not 16. Mine is a Bositich but I think the same gun. There is a video on saying don't lube it and I have. It showes using CRC electrical cleaner to wash it all out after taking it apart and it worked like a champ. Going to give that a try tomorrow when I pick up a can @@CollinsCountry

[@62gaming2]

Bought a new one tool only got nails later and it's not firing at all

[@CollinsCountry]

+62 Gaming Hey there! I’m sorry yours isn’t working. If it’s new I would contact Dewalt customer service and try to get a new one….

[@62gaming2]

@@CollinsCountry I Bought it from somone made contact with them and hopefully by weekend I get it replace. The motor is revving but no firing at all

[@CollinsCountry]

+62 Gaming Oh. Gotcha. Well hopefully you’ll get it replaced. If not, you can buy the kit we purchased in this video and see if it fixed the problem.

[@Steve-vz3ud]

On Ya Mate

[@CollinsCountry]

+Steve 👍🏻

[@thescottishlion]

I didnt even get 20 nails through mine on the first day and the motor wont even start when i pull the trigger

[@thelarochellefarm595]

The dewalt seems to have a hard time sinking spikes. Some far it’s a piece of junk for anything bigger than and 8.

[@jasonweigert2308]

I can't even count how many 16 penny nails I've thrown through that thing.

[@holley-n2r]

(0:37) "The springs are wearable parts." Interesting. I had no idea the springs were wearable. Do you wear the springs in your ears? On your belt? Across your boot laces? Personally I'd wear a springs on my special thing, but that's just me.

[@CollinsCountry]

ok

[@isaacserna7593]

@@CollinsCountrylmao , this guy ok , wears on his thing ? Lol

[@hugofonseca5637]

Do you add oil?

[@CollinsCountry]

Do not add oil as this will cause dust and debris to collect on and inside the nail gun.

[@clinteastwood8230]

No don't use oil you will destroy the tool . The nail hammered on from a friction drive rod if you oil it no friction and it's ruined oil less tool

[@DavisMichael-wx5mp]

Wash out with CRC elec cleaner @@clinteastwood8230

[@jorbace]

No. Never. Only pneumatic tools because the condensation (vapor) inside the hoses.

[@LeeAlvarez]

Opened the top up and there was a jammed nail

[@CollinsCountry]

+Lee A Oh wow. That’s an easy fix then! We haven’t had that happen yet, but I’m sure it will one day. We use the nailer a lot!

[@athiestwales]

I have one of these and i think its shite . Back to my old paslode .

[@CollinsCountry]

I think there is room for approval for sure. But to me worth it to be cordless.

[@foes1000]

What kind of kit did you order?

[@CollinsCountry]

Here is the link. LEt us know if it does not work www.amazon.com/gp/product/B00...

[@edwoodward5412]

I run Hitachi nr 83 a modified to shoot on demand from air but wanted to try the electric but I burn through 35000 nails per house or alot more on a 100x60 horse barn is it worth it or good for a home owner

[@edwoodward5412]

​@@CollinsCountrydidn't work site can't be found on Amazon

[@foes1000]

@@CollinsCountry it says broken link

[@CollinsCountry]

@@foes1000 I just clicked on it and appears to work for me. www.amazon.com/gp/product/B00P9ATXZY/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00P9ATXZY&linkCode=as2&tag=collinscountr-20&linkId=413810564438d178583122d973ef418c