How to fix a Nissan Titan intermittent No Start problem

[@ACMAN64]

Hola, man! I finally decided to address the starting problem by changing the starter and a little voice said "CHECK THE INTERNET AGAIN!" Found your video, found the part after looking at 3 stores online and calling 2 (Advance Auto). Replaced the module and cracked open mine. DANG! Mucho burnto! Thanks sooo much for sharing your knowledge, brother!

[@Foxcanfixit]

@@ACMAN64 I hope it fixes your problem. Only thing left after that is the starter which is expensive and a pain to get to

[@posell]

Thanks so much. In the middle of the same issue right now 1100 miles from home and you're saving me a lot if trouble

[@Foxcanfixit]

I hope this is the fix you need. After this the only answer is usually the starter itself

[@stangfan79]

Phenomenal video and a lifesaver due to me having the same issue currently on my 2012 Titan pro-4x. I love this truck and would like to continue using it moving forward so thank you!

[@Foxcanfixit]

Glad it helped

[@Turningwrenches85]

Good fix on that one , always easier to replace that than the starter for sure glad to see it was only the switch👍

[@Foxcanfixit]

Thanks 👍

[@jesusbojorquez1451]

You the man!!! Tried it & worked. Problem solved & saved a few $$$

[@jamesalbertoni8456]

Saved me a bunch of money. I replaced the battery and it got better (needed a new one for sure anyway) but it still happened.

[@TheWyliePirate]

Thanks for the video. I had same issue and your video helped me fix it. The metal is fine, I think it’s the grease used on the metal that gets funky. I took it apart and used Collinite metal cleaner / polish with a toothbrush to clean everything. Working great!

[@jnworth]

So what kind of grease did you put back in it?

[@jnworth]

Or did you put grease back in it?

[@russellmuller8777]

Yeah I sorta thought that was there end game. Buy the whole unit. I appreciate you getting back to me about it. Thanks sir and have a great day

[@Foxcanfixit]

No problem, thanks for watching

[@russellmuller8777]

@@Foxcanfixit so I got a new ignition switch the other day like we discussed. Started fine the first day, today went to start it. Everything powers up go to crank it, hear the starter click, no crank. Any thoughts. I did send you a DM on IG if that’s an easier platform to discuss on. Thanks

[@Foxcanfixit]

@@russellmuller8777 if it still does it then only real thing left is the starter

[@russellmuller8777]

@@Foxcanfixit that was my thought as well. I didn’t know if it could have been the actual key switch on the front of that tumbler assembly

[@Foxcanfixit]

@@russellmuller8777 from what I read it’s not nearly as likely as the starter

[@agavalenca]

Hi there , i have this 2006 titan LE . What is the part number please

[@Foxcanfixit]

Carquest part CSA1349 or autozone part LS809 or Beck-Arnley part #201-1825

[@livin2fishfishin2live29]

Man, I was sooo stoked to find this video! Been having this issue with my 2015 Titan for a while now and it’s been driving me nuts! I got the switch part and installed it this past weekend and it all seemed fine until 1/2 hour ago. I went to start my truck and the same old “click…click…click” and started on the 4th turn. I’ve got a brand new battery (less that 2weeks old), replaced the positive terminal and fuse connector, cleaned all of the contacts, new negative battery cable… Any idea what else it could be?

[@Foxcanfixit]

Unfortunately the only thing left would be the starter.

[@bartonoutfitters]

Just wanted to join the chorus of folks saying thank you for the video. I've only watched it about 7 times. I think I've found the switch only, fingers crossed.

[@Foxcanfixit]

If you get one for a similar year Nissan XTerra it’s the same thing

[@matthewpark8926]

Very informative…. Thank you.. 🤙🏽🤙🏽🤙🏽

[@NCrdwlf]

My Xterra 2014 pro4x 6m is doing same thing , could it be same thing ? Oh I see it’s the same part number . I’m going to try it before I get robbed by the stealership.

[@catwil7510]

Been having this same issue with my '06 titan se--have to bump start it every so often & that was working, until it wasn't yesterday after work. Left me at the Sheetz. This is something I can do myself before I have to get a tow. Thanks so much!! Could you tell me exactly what to ask for to get the part--is it Intermittent ignition switch? Thank you again!! This is awesome

[@catwil7510]

*I guess intermittent is the problem, not the part..oops

[@Foxcanfixit]

@@catwil7510 it is the ignition switch. But usually you can’t get it specifically for the Titan without buying the whole key and lock assembly. The one I used is for a Nissan Xterra (it’s the same part) and I found 3 different brand part numbers to try. Carquest CSA1349, Autozone LS809, or Beck-Arnley 201-1825. Hope that helps

[@catwil7510]

Thanks so much for the reply--was just looking thru auto zone and couldn't find it, that explains it! Appreciate your time in finding the part numbers, also! 🤞 found it!

[@catwil7510]

Update: got the part from auto zone using the part number you provided. Was able to change it out myself, hardly took any time at all! And while it ended up not being the problem, was extremely helpful in confirming the problem to be the starter & further, immensely satisfying to be able to do the job myself thanks to your video!! Opened it up and found those points to be really charred & worn, so replacing didn't hurt a thing. Thanks again!

[@Foxcanfixit]

@@catwil7510 well, that sucks that it did not fix it, however I’m glad it narrowed down your issue and you got some satisfaction out of doing it yourself. 👍

[@ethan1627]

Can you provide an update to see if your truck gave you more problems with that?

[@Foxcanfixit]

I sold it last year, but I did not have any other no crank no start problems after this

[@NikoLara-b1i]

Ur awesome this has been my issue for a long time

[@Whatsupeiththestupidhandlebs]

Amazing how none of the other channels even suggest changing this first. Seems they all want you to go straight to spending hours and hundreds of dollars without a mention of this simple fix. I have two 2012 Nissans, a Titan and an Armada. Both had the same no start issue at different times and both fixed with this simple repair.

[@Foxcanfixit]

It’s not a guaranteed fix, but it is a known weak point to replace before blaming the starter, which as you mentioned is an absolute bear to change in these trucks. Glad I could help. 😀👍

[@Whatsupeiththestupidhandlebs]

@@Foxcanfixit I actually fixed them before I found this video as I’m very mechanically inclined. But I’m glad to see someone posted a video on this fix instead of another one on the starter. 👍

[@russellmuller8777]

Hi, had a question, saw your video on intermittent starting on the Titan. Same issue 05’ Titan LE. Is the Nissan part number 48750-0M010 the right one. I crossed referenced it against my Vin and it said it wasn’t a match but it is supposed to fit all Nissans from 96’-2021 says Nissan Parts Deal. Just wondering. Thanks

[@Foxcanfixit]

Carquest part CSA1349 or autozone part LS809 or Beck-Arnley part #201-1825

[@russellmuller8777]

So there is no genuine nissan part number as I mentioned above? Thanks

[@Foxcanfixit]

@@russellmuller8777 Nissan doesn’t like or want to sell it separately, so I don’t think they provide and individual part number. However, the one I used was for XTerra and frontier trucks, and was a perfect match

[@VaporheadATC]

I haven't tried replace the switch, but I can get the truck to start by wiggling the column shifter. Not sure how the two are related.

[@Foxcanfixit]

Column shifter may mean a bad Park/Neutral safety switch

[@VaporheadATC]

I am thinking the same thing now. Just after I posted my comment, the truck will only start in neutral, or if cycle the column shifter. I'm going to try and reset/adjust the shifter cable first because the safety switch is integrated into the TCM, and the TCM on the Titan is integrated into the transmission valve body. @@Foxcanfixit

[@jessicamathews5758]

Did you have to get a key replacement for the ignition switch?

[@Foxcanfixit]

No, this replaces the electrical switch at the base of the assembly, but your Key and the key switch remain in place

[@jessicamathews5758]

@@Foxcanfixit ok thank you

[@scotthenderson4376]

How did you diagnose it. I new I had iffy battery ans starter just changed both and still no start just click

[@Foxcanfixit]

Honestly I just didn’t want to yank the starter because it’s a pain to get to and it’s expensive. Every time I tried to crank it I could still hear the starter solenoid click under the hood but no crank. I’m still not 💯 that it is the only issue, when the weather warms up if it does it again I am replacing the starter.

[@joncross7822]

Would this work for a 2018 titan? Mine works off and on. The remote start acts up along with the push button start.

[@Foxcanfixit]

I can’t say for sure, I only know that it will fit and possibly work for the 1st gen. Have you checked the forums at TitanTalk? They have a lot of good info

[@vincemastriani5109]

What year is your Titan ? I tried to get the ignition switch for my 2004 and they said it only comes as the whole assembly for $800 . I used the part number you posted on Nissan parts online and they said it wasn't for my truck.

[@Foxcanfixit]

2012, if your dealer says that just go online and buy it, eBay or Amazon should have it

[@johnrhoden3625]

Could be ECM relay. A new one is about 20 bucks. It mimicks the same symptoms as the bad ignition switch.

[@evillaroman]

Thank you for posting. I think this is my Titan's issue. What's the part#?

[@Foxcanfixit]

Brand: Nissan Part #: 48750-0M010

[@evillaroman]

You’re a life saver!

[@Foxcanfixit]

This number is for an XTerra, but it’s the same as the Titan which is harder to find even though it’s the same part different number

[@Fili_Delta]

Hey man i really need some help, my dads 2010 titan turns on just fine and 5 minutes later it turns over and no start just turning over. And 5 more minutes later it turns on again it’s random and we aren’t sure what it is. We can get it on just fine sometimes and other times it just turns over and over but no ignition. Any ideas?? I took apart this switch and it had some burnt terminals I did clean it and ordered the part but even tho it’s clean it still not starting some times. Thanks!!

[@Foxcanfixit]

So it will crank but not start sometimes, and sometimes it starts right up? If so I don’t think that’s this switch, this switch has issues not letting it crank at all. A crank no start sounds like an ignition module issue

[@maddmavic]

Any idea part nuber for the 04 titan se crew cab ?

[@Foxcanfixit]

Could not find it for the Titan, only came with the entire key and tumbler assembly. Strangely the XTerra and Frontier use the same key and tumbler setup but you can get the switch separately

[@jessicamathews5758]

My 2006 Nissan Titan SE the part number for Autozone is LS1461.

[@Foxcanfixit]

Sounds correct. Should work for frontiers, XTerra, and titans

[@RobertJackson-ky4ky]

The issue i have is finding the switch minus the whole component ($600). Any pointers on where i can find one? No luck on rock auto

[@Foxcanfixit]

eBay is where I found mine

[@RobertJackson-ky4ky]

@@Foxcanfixit yep, $56. Much better. Cheers

[@jessicabradley3789]

How would I get a part number for a 2013 Nissan ignition switch?

[@Foxcanfixit]

Beck arnley part#201-1825 should work until 2015 model year.

[@anthonycrouchman3651]

I replied my starter and is was full of corrosion and gunk but it started to intermittently start. Hopefully this switch is the problem

[@Foxcanfixit]

I hope it fixes your issue. These are great trucks plagued by this nagging intermittent issue.

[@lenward2005]

Ebay

[@ethan1627]

Wow... Thanks brother... Big info!!!!

[@Foxcanfixit]

Hope it helps!

[@nicholasbruce2171]

Where can I find the part? I've checked every parts store

[@Foxcanfixit]

I ordered mine thru online, Rock Auto probs lt has it, if not, EBay definitely will

[@SavageDarkness]

Do you think m,you could please get me the part number to that thing? My parts stores keep listing the whole unit with key for like $700-$1200

[@Foxcanfixit]

@@SavageDarkness carquest # CSA1349 or Autozone # LS809 or Beck-Arnley # 201-1825

[@SavageDarkness]

@@Foxcanfixit Thank you a ton, my guy.

[@Foxcanfixit]

@@SavageDarkness I hope it fixes it for you

[@BrennanBeckjorden]

If you put on the positive first it might fry the muffler bearing

[@Foxcanfixit]

Well I definitely don’t want to do that, I just replaced both of mine AND the upstream oil belt. It was a big job

[@jaybotardo9591]

Appreciate part # Thanks!

[@Randomishh]

I nave an 04 titan with this same issue. I have noticed what helps it crank and start is putting the truck on neutral and once it slowly rolls forward or backwards it turns in no problem. Would this be a starter issue?

[@Foxcanfixit]

Sounds like it could be the Starter or P/N safety switch

[@jasonm7931]

Thanks for the video brother!!!!

[@donrast2466]

I’m having the same problem on my 2012 Nissan Titan SV. Very sporadic but frustrating issue. Have had the truck checked before for alternator and starter problems, but both checked out fine. Would you happen to have the part number for my truck by chance? (Really awesome video!). Thanks a lot sir

[@Foxcanfixit]

There is no part number for the trucks, the part number I list in the video is for an X-terra which uses the same ignition switch key tumbler, so I used it for this repair

[@Foxcanfixit]

Beck arnley part#201-1825 should work until 2015 model year.

[@donrast2466]

So I went to O’Reilly’s. They had a Direct Import brand since Beck and Arnley was a special order part with this store. The part number was 18-0536 “Switch/Interruptor”. I installed it just fine to my truck, but same issue as before. Can hear the solenoid click and have lights in the cab, but it’s not turning over. I’m headed to see if my battery is fully charged. If it is, we should be able to rule that out. What next? Starter? (Even though it’s been checked out and said to be ok?)

[@Foxcanfixit]

@@donrast2466 from everything I’ve read fixing mine the starter and or wiring connections at the starter are the next most likely things. Only other thing I would check if you haven’t already is trying to start it in park and in neutral to see if it’s the park/neutral safety switch

[@donrast2466]

Will try. Thank you very much sir

[@dm-qx9fy]

Anyone know what this part number is? I can't find just what he is swapping out. I have the same type of issue, turn key, no start, takes a bit of turning and then starts....

[@Foxcanfixit]

Nissan part#48750-0M010

[@virgboni]

thank you

[@resolutetechnician8074]

Thanks a bunch!

[@Foxcanfixit]

No worries!

[@harryshiek8406]

All I know is that what nissan says negative off first.

[@WesCheffa]

Whats the part number

[@Foxcanfixit]

Beck-Arnley #201-1825 is what I used. I believe it was listed for a Nissan XTerra, frontier XTerra pathfinder and Titan ignitions were all the same then

[@VinoRatRodbuilds]

Awesome nicely done. 👍

[@Foxcanfixit]

Thanks 👍

[@TheTippytoe44]

Is it still starting correctly?

[@Foxcanfixit]

So far yes, but I am saving up for a starter because it’s noisy like a bearing going out or worn teeth

[@danturner7995]

positive first then there is no chance of arcing it

[@chebert857]

Actually that's not correct.

[@OzZy-13820]

Mine will crank and not start... then itll start sometimes

[@OzZy-13820]

It only has 67800 miles on it and it's a 2012

[@Foxcanfixit]

@@OzZy-13820 that Could be that same problem, but maybe not. You should have a dealer mechanic check it first

[@rwwdzzm5608]

I have a 2017 that does the same thing

[@Foxcanfixit]

I do not know what they changed in the 2nd gen Titans. This may or may not be your issue and may or may not be the same part in the same location

[@chebert857]

I worked in auto repair all my life. When they started putting computers in vehicles l was told. Always take off the negative first. If you take off the positive first and arc the wrench against the vehicle frame you'll fry the computer.

[@Foxcanfixit]

Good tip !