Thank you for your help! I found using a right-angle adapter for my drill and a set of screw extractors worked much better than chiseling for getting out those horrible security bolts.
@MegatronicsZA9 ай бұрын
Those bolts are the worst thing ever, a dremel also works well to cut a groove on the bolt so you can get a screw driver on those bolts
@DM-vl6kl4 ай бұрын
Use an oscillating tool with blade to cut metal make sure blade is small enough to fit it the hole then use a flat head screw driver
@MegatronicsZA4 ай бұрын
Yeah a grinder would work well, a dremel too is also a good compact tool to get in there.
@felixhartmann47824 ай бұрын
nice vid bro. are those m8 bolts you are using?
@MegatronicsZA4 ай бұрын
Thanks man... The bolts are M10. With the same length as the original ones
@alanphillips872011 ай бұрын
Great video.helpful. 👍
@MegatronicsZA11 ай бұрын
Thank you Alan, I appreciate it 💪🏽💪🏽💪🏽
@KimberlyBrooks-s7b11 ай бұрын
I hope I can do this!
@MegatronicsZA11 ай бұрын
You can, the difficult part is getting the security bolts out.
@vrcustoms74 күн бұрын
Happend to out golf today, cant turn it off. Not looking forward for this project
@MegatronicsZA3 күн бұрын
@@vrcustoms7 damn with me too it started like that. The job is really not difficult, the hard part is getting those screws out! That's worse
@paveltarasenko54864 ай бұрын
hi what was the reason? the eps lamp lit up? Good morning
@MegatronicsZA4 ай бұрын
@@paveltarasenko5486 hey... The reason was that the key would no longer turn, I wasn't able to turn on accessories or even start the car.
@paveltarasenko54864 ай бұрын
@@MegatronicsZA thank you. I have a trouble p2535 and light eps. From car scanner writes ignition switch run/ start position curciut high
@MegatronicsZA4 ай бұрын
@@paveltarasenko5486 from the ignition, there's a switch that turns on the car when you press on the button. It must be burnt, replace it.
@paveltarasenko54864 ай бұрын
@@MegatronicsZA the car starts without problems. what are you talking about? about fuses? or in the lock on the left not where the key is, there is a connector and it needs to be replaced 5q0905849
@CodyDinnell-wf1ue Жыл бұрын
Did you just get all the broken parts out an it just started working again?
@MegatronicsZA Жыл бұрын
Yes, if you watch the full video I tested it at the end. Even right now my car key turns with the slightest of effort.
@PaPaPowell07 Жыл бұрын
I’m stuck on getting the barrel out with the paper clip. It just won’t go down all the way and yes the key is turned.
@MegatronicsZA Жыл бұрын
Please try to get a longer thin and strong wire that can fit and push it down firmly, since it will be strong it won't bend and when it has reached a stop try pulling the barrel while pushing down the wire. It will come off.
@PaPaPowell07 Жыл бұрын
@@MegatronicsZA I just literally got it with a hair pin. I just had to wiggle it a bunch and yes it just popped right out. Thanks for the reply.
@MegatronicsZA Жыл бұрын
@@PaPaPowell07 lol I guess it wanted you to show that you're serious about it... I'm glad it came out. It's a pleasure man 🙌🏼🙌🏼🙌🏼
@davemansfield86539 ай бұрын
I tired tiny allen wrenches, bvut eventually it worked with a paper clip and some patience.
@KarlRamel4 ай бұрын
Hi! I can’t turn my key to on to align with the hole. How did u do it?
@MegatronicsZA4 ай бұрын
Hey, when the key is stuck try to turn it by being gentle and soft for at least 4-5 times, then on the 6th try turn the key hard it will eventually turn.
@MarvinsBloopsАй бұрын
i can confirm this works!!!
@MegatronicsZAАй бұрын
@MarvinsBloops I'm glad it has also worked for you as it did for me. I appreciate you supporting the channel 🙌🏽🙌🏽🙌🏽
@BradleyGovender-c6m8 ай бұрын
Were are you located?
@MegatronicsZA8 ай бұрын
South Africa 🇿🇦
@BradleyGovender-c6m8 ай бұрын
Gauteng?
@MegatronicsZA8 ай бұрын
@@BradleyGovender-c6m yep, in Randburg
@BradleyGovender-c6m8 ай бұрын
Yooh Im struggling I need your help..but I'm in pta west wespark