How to fix any corrupted not responding or dead hard disk easily | hard disk repair

[@NitinTnsGreen]

👇 (Warning)- This method will delete all your files from your hard disk, so do it on your own risk. Support my channel paypal- paypal.me/NitinTnsGreen

[@Typsty]

Does this delete windows 10?

[@NitinTnsGreen]

@@Typsty everything will delete

[@Typsty]

Nitin Tns Green i know the data and stuff but does it delete windows?

[@soufianeazzouz121]

Is there any solution to recover the deleted files?

[@kaverjordankharbteng2550]

how do I not delete the files in it?

[@neva3368]

Random indian guys on here always out here clutching up, thanks for the tutorial i had bought an external hard drive enclosure for an old ssd and i couldn’t figure out how to make it work 🙏🙏

[@odvutmanush263]

Did it work? If not i can help you

[@ghostrejov2666]

my hdd is very old its close to its life span what can you advise? should i buy new one or do this?

[@brownniki5771]

*Cyber_kor* on Instagram saved my life. He helped recovered my important data. He is on WhatsApp [phone]

[@sumatedebbarma2574]

Hey what does a dead hard disc looks like. Cz my hard disc does not show partition, and also my file are missing as well.

[@jorgezl48]

Havin diskPart open, as soon i plug the external bad drive even diskPart becomes unresponsive so writing "list disk" doesnt work. Unplug the external drive and it all works fine. Any ideas how to formar it back to new conditions? its a pretty new 2.5 drive from WD. Thank you

[@27carloyu]

same thing happened to me. i cant write in cmd when the broken drive is plugged in

[@raselahmad1144]

try to use "victoria" tools, but you have to enough knowledge to use it. you may help from google or youtube for how to use this tool .

[@KamalHossainMd]

@@raselahmad1144 what is victoria tools?

[@watahecYT]

@@KamalHossainMd did it work?

[@bilalop4953]

@@27carloyu same

[@nitramocim4294]

After "create partition primary" - Disk is uninitialized, initializing it to GPT. DiskPart has encountered an error: Data Error (cyclic redundancy check). See the system event log for more information. Any suggestions what can I do?

[@mananparmar88]

WARNING: This method will erase your data

[@NitinTnsGreen]

Yes it will, so before doing this make sure u recovered or saved your data by any data recovery software.

[@mohammedabshir1]

@@NitinTnsGreen pls recommend recovery software

[@Johnniebizot]

@@NitinTnsGreen Now you say it. You are supposed to help inexperienced people recover their data. Now my data is lost. This page is definitely a NO GO

[@NitinTnsGreen]

@@mohammedabshir1 Remo recovery

[@NitinTnsGreen]

@@Johnniebizot i warn about it in video start, also for how to recover data from corrupted hdd i made a video already about 3 year ago.

[@kitKathandReinAdventures]

is this applicable for an external hard dally isks? I have a 1 tb external hard disk which suddenly started transferring file slowly. After waiting for hours, error prompted. Eventually, the folder is not responding anymore. I badly needed a positive solution that doesn't need removing/wiping out the data. But if there's no other option, I might consider this option. Still hoping for other options and help from anyone will be very much appreciated.

[@NitinTnsGreen]

Of course this work for external hdd i made this video for external hdd , as u said in ur comment i understand ur hdd is extremely slow and i think you need to save ur all data in other hdd slowly slowly then completely formet your hdd or follow this video but after save ur data.

[@winnvn9120]

Thank you so much for helping, this really is a life saver btw also in 2021 u guys need to run diskpart in command prompt in administrator mode and replace disc with disk

[@NitinTnsGreen]

happy for you enjoy

[@Potts2k8]

I know I'm late, but would this method help in fixing a Seagate Portable that won't read? On either PC or the Xbox One it was being used for... Just suddenly stopped working 🤷🏻‍♂️

[@vishalmatthew4790]

thanks brother! appreciate it. i was scared that my 4tb wont be usable anymore. thank a lot

[@NitinTnsGreen]

Glad I could help enjoy keep watching :) more videos on way

[@_jareddo]

8 years later, i have just fixed myhard disk using this video, you are a genius

[@NitinTnsGreen]

Awesome 👍 happy to hear that

[@blindpeteoz5673]

Thank You, Thank you, Thank you !!! I drove myself crazy for days trying data wipers, and none of them could even find the HDD to clean it! I found your video after a long search, and your instructions brought my HDD back to life 👍👍👍👍👍👍👍👌👌👌👌👌👌👌

[@NitinTnsGreen]

Great to hear! your most welcome i happy for you too enjoy and keep watching :)

[@josesilver9072]

Fr I have been trying to fix my stuff for the past 3 days

[@mkadebiyi8987]

MY own was for weeks up to the point that i even open the disk ......

[@danielfennock3707]

Is there an easier way? like i can finish within a few clicks? maybe i should also try aomei?

[@AnnkurKumar]

Hi , nice video. You showed a way to clean the harddisk. What to do , when we want to retrieve data from detecting but not showing external/ dead or clicking hdd??

[@AnnkurKumar]

Bhai like nahi solution chahiye? If you can open up and comment , please.

[@InnocentGasa25]

I'm having trouble moving to the step of "list disk". What did you press to move from on computer: ... to typing list disk.

[@spitfirelast8761]

But what if the disk part clean throws an error? What would you do then?

[@aboiwithmemes3988]

Hey, when i open the diskpart it won't let me type anything. Do you know how to fix this?

[@baiswaffoh]

Not working to my hardesk. Diskpart has encountered an error: data error cyclic redundancy check. See the system event log for more information.

[@ZiEmYT]

also mine, how to fix this?

[@pyaoliang]

Thanks for the vid! Can this be done on a Mac or Mac formatted external hard drive?

[@NitinTnsGreen]

Not sure if hdd of mac is external then u can try it too on windows system

[@recetarioelajo]

Hi! i have a problem every time i run list disk it stops, and if i unplugged the hdd it works again but it only shows the primary hd. Do you know any other way to format it? this 2tb hdd appears like yours in the system explorer. Thanks for your help

[@NitinTnsGreen]

did you connected ur hard disk by external usb ?

[@recetarioelajo]

yes, by usb3

[@ciobanur97]

El Ajo Producciones Have you got it to work? if yes please tell me how

[@nayanjbaruah9753]

El Ajo Producciones bro i have the same issue

[@greatfulcoast]

The best tested and tried solution is THIS. just download 'minitool partition wizard'. open the free program connect your corrupted hard drive using a USB connector and wait for it to appear. after it does, just right click on it, select delete partition and wait for it to complete. and that is ALL. I fixed mine and it is working!!!

[@paulenea4041]

Hi! If I have only 1 hdd which is broken(when I open the pc I hear click noice, and my screen freeze after) I can fix it without having another hdd?

[@airescomoane1705]

Hello, when i type "Create partition primary" it says "Diskpart has encoured an error: The request could not be performed because of an I/O device error. See the System Event Log for more information". can you help me??

[@lovekush9103]

HDD is dead

[@juanmoreno8059]

@@lovekush9103 There is not hope???, i hace the same message

[@lovekush9103]

The request could not be performed because of an I/O device error. Is a Virus that change register

[@sydneytagoe928]

I also had the same message

[@gnanampon9406]

In my computer, diskpart also not working... When i connect the hard drive it hang the all programs... Please suggest a solution...

[@quantumbarry5213]

Same with me😭

[@mondi4749]

i have the same problem with you. To solve this: 1. Enter the "disk part" command first before plugging in the drive 2. Enter the commands ( Starting from the "list disk" ). For me, each command took a while to finish so wait patiently.

[@tokyonairobi3759]

Bro when i press entervon diskpart it says do u want to make some changes in this computer. Will it be safe to continue yes???

[@maverickx2878]

When I typed diskpart in cmd a new screen is opened and I'm unable to type anything in it. Plz help me on it

[@playboy123163]

Try running it as admin

[@khuthadzombedzi6170]

Same problem. What do I do

[@pravinsatbhai2412]

@@kathircs1668 Same problem

[@belamaheta7813]

Same problem

[@scottj719]

So can a drive be evaluated in some way up front to know whether it will be saved via this process or if the other software mentioned (Hard Disk Low Level Format Tool) would be a better choice? Does this method compromise or have risk of causing corruption or loss of the files a person is working to recover via making these partition changes? Are there any guide such as "So... you can't access your files via Winodws but your had drive sounds healthy, follow these steps in this order A, B, C, etc) ? I believe my operating system sustained enough corruption that it wont load, but file-recovery software finds my files and up until the point the computer would not load, I noticed NO file that was corrupted when opened. The problem with file recovery software is that it pulls back anything and everything wanted and unwanted from the drive and with generic file names leaving you with a pile of stuff and you get to dig through temporary internet files, and all sorts of junk to find what you hope is there.

[@galihputrawicaksono334]

AFTER 7 YEARS THIS TUTORIAL WAS WORKING FOR REAL

[@NitinTnsGreen]

happy to hear it :)

[@Ahmad-xw7sf]

dose it delete the data inside the hard disk or NOT !

[@galihputrawicaksono334]

​@@Ahmad-xw7sfNot

[@freakygamer3138]

I got smart status bad error. My hdd had failure issues. So this applicable to internal hdd?

[@NitinTnsGreen]

internal or external which hdd dude? this method i tried on my pc internal 3.5 hard drive using external case and i recommend you do the same

[@freakygamer3138]

@@NitinTnsGreen Internal hdd man

[@haugedk1]

I can't believe the first guide i used to fix my issue actually worked. Great job!

[@NitinTnsGreen]

Great to hear! enjoy

[@sketchyjeevan2160]

After entering command prompt i am unable to type anything in diskpart its lagging there is no opton to write anything

[@mondi4749]

enter the "disk part" command first before plugging in the drive

[@uppamjotsingh6150]

You my man, are a genius! saved my time and efforts. Cheers! For people who are still figuring it out, this method absolutely worked for me on HP Pavillion Laptop with 250GB SSD in internal SATA interface and old 1TB Harddisk in DVD caddy. It took 5 seconds to work perfectly! No need of any other partition softwares. These steps are in correct order. Thanks once again bro

[@NitinTnsGreen]

haha thanks too and enjoy keep watching

[@vanpatrickalivio2172]

When I formatted my hard disk and I installed windows 8 and my harddrive somehow was corrupted and I experience this bootloops and I see from my screen that windows encountered a problem.... Will this method shown in the video fix my problemmm???

[@NitinTnsGreen]

Friends like share my video and don't forget to "Subscribe" my channel for my all new videos updates if need any help or u have any questions then ask and tell in comment bellow thank you :) #NitinTnsGreen

[@johnwatson401]

your a fucking life saver thank you sooo much for this video

[@uksuperrascal]

Hi Nitin - I have a duff 2.5 ins 5v 500gb hdd In a usb case. The case works ok with other hdd, case led flashes then stays on and flashes when accessed But with the duff hdd the led on the case does not stop flashing. When I unplug the hdd, for a few seconds the drive registers and opens a windows, that window then closes after a few seconds because the drive is unplugged. When I leave the hdd connected no matter how long the led flashes non stop and does not register a window or drive letter or show a disk number in diskpart unless i disconnect the hdd - I note that your diskpart runs under system32 version 6.3.9600 My diskpart runs under system32>diskpart version 10.0.17134.1 in windows 10 any ideas ?

[@Glyndelyouwootube]

NOT HELPING

[@NitinTnsGreen]

Okay fine . I get it it's not help for you.

[@kenshinyamato3233]

My laptop and pc can detect it but it doesn't open feom my computer. Is this adaptor got installer?

[@belaidmontassar8519]

When i try to create a partition : it's say ''' the request could not be performed because of an i/o device error' '... help please

[@jack-md8rq]

Same problem to me also

[@theseeker7194]

Then it could be a mechanical error. You need to physically repair the hard drive.

[@spenny3679]

You need to buy a new hard drive sadly

[@nadirmonroy]

You are awesome bro! It did work for me on a 2TB HDD I thought it was broken because I plugged it and made a weird noise, so I was looking to find a format following your steps and boom! Woks perfectly fine!

[@NitinTnsGreen]

Awesome now enjoy and later on upgrade on ssd bec hdd is old now and not safe for keep our imp data

[@satishnaidu8961]

when I entered diskpart and hit enter then a new window opened but without any DISKPART> prompt to enter 'select disk' it stuck after 'On computer: satish' DISKPART> is not shown, do you know the reason? Let me know whether you know it or not based on taty I shall try other ideas

[@johnnyfiveo]

my hard drive doesn't even show up. even in DOS

[@NitinTnsGreen]

must be a electrical fault

[@battleangelgaming5483]

He is not educated enough 😂😂😂

[@llamacebu216]

@@battleangelgaming5483 he holds a camera and yells at cops for a living. What do you expect

[@battleangelgaming5483]

😜😜😜😜😜😜

[@veeragoutham6001]

@@NitinTnsGreen how to rectify the electrical fault?

[@kishoredondapati8478]

Able to follow the steps and get the drive but getting boot failure while using in pc . When I checked with tecnician harddisk health is 30 %. Please suggest

[@oragoronald9505]

Thank you for this. I've had a dead external hard drive for years and now I can use it.

[@kokushibo3254]

Bro what is the disk 1 as it shown in my pc too which have 0b size and space and don't show the real size of my disk which is 512 gb

[@oragoronald9505]

@@kokushibo3254 how many drives do you have?

[@kokushibo3254]

@@oragoronald9505 2 one is SSD and other one is hdd which shows 0 b in cmd should I format that drive to clear the 0b problem and not showing in this pc

[@oragoronald9505]

@@kokushibo3254 the disk that has your OS is disk0 , the other one is what you can format.

[@ANNASENGINE]

if your laptop detects the drives of your internal hard drive on (my computer) but there is no volume space underneath them and if you try to open these drives it takes ages and your laptop becomes non-responding. Is it a bad indication that you lost ur media ? any help please

[@NitinTnsGreen]

Its mean your hard drive in bad condition you should fix it after recovery by any good recovery software

[@dercoss]

Diskpart is a powerful tool but it will only help with most logical problems. There are some situations when something like "Hard Disk Low Level Format Tool" from HDDGuru will enable you to recover a corrupted drive wherre DiskPart can't. It should be pointed out that major problems like physical drive issues and corrupt firmware, etc are beyond such tools. If Diskpart does put the drive in a usable state I would check it thoroughly with HDTune, Victoria or something similar to make sure the drive isn't failing. Should you clean then format the drive there is still a chance of getting your data back using a decent recovery program like GetDataBack, Reclaime, DMDE. They aren't free but are much better than most over hyped products out there.

[@ruobian]

My HDD was well. I tried to clean it and i saw a video that clean HDD with Hard Disk Low Level Format Tool. I tried it. Cleaning process interupted twice. Now, I cannot reach my HDD anymore. I plug it USB port, but PC doesn't see it for 30 min. After that duration, it see HDD. But I cannot do anything well with my HDD. What is the problem? What can I do for it?

[@FlexSelectBeats]

mine just freeze , it wont show up on list disk. its just loading forever. is it complete dead my hdd ?

[@akiideokar7861]

Hi,i tried ur fix and followed the process but when i enter clean in cmd my external hard drive is stuck there

[@mohamedddos7301]

me too

[@kitKathandReinAdventures]

I tried that part, it took long to show the diskpart, to enter the list part instruction and when I tried the clean option, I observed that it took long to respond but it eventually prompted that disk is clean, so most likely that's the same case

[@ragnar6994]

@@kitKathandReinAdventures how long exactly?

[@kitKathandReinAdventures]

@@ragnar6994 a few seconds to a bout almost a minute

[@srinipadyala169]

Hi Nitin like the video. I have a hard disk that will not boot. Now I got a new SSD, how do i copy the OS into the new SSD and the files before I do what you showed in the you tube. Any help would be greatly appretiated.

[@NitinTnsGreen]

you cant copy os in in other hdd or in ssd you need to reinstall new os in in new installed ssd , about files connect both drives in ssd put os and the old hdd in other sata port after that u can copy files from old hdd to new ssd

[@dleland71]

Is there a way that WON'T delete your files?

[@chauvintookaknee4blm268]

Exactly lol

[@9xtryhx230]

Yes, but I would higly suggest you to hand over the drive to professionals since they have access to tools and software to extract the data. I know its an old comment, but I visited one of the companies and they managed to extract almost all of my data!

[@chauvintookaknee4blm268]

@@9xtryhx230 super expensive

[@9xtryhx230]

@@chauvintookaknee4blm268 mmm, well it depends on the place? Mine was pretty cheap, around $120 to extract the data and for me, the files were priceless!

[@chauvintookaknee4blm268]

@@9xtryhx230 wtf lol?!? What was the company and location??

[@metal5738]

as i entered "clean" nothing happens... or do i haveto wait a couple of minutes??

[@patriiiiiii]

Thank you so much!!! I bought an enclosure for my old hdd but when I opened it it hangs my pc I just followed all the steps and nlw it works perfectly fine! Thank you!

[@NitinTnsGreen]

Glad I could help! enjoy keep watching

[@marial2976]

But loss all data

[@delirik8519]

Does this help with updating graphics card? I always get a BSOD when updating them

[@NitinTnsGreen]

could be many reason for BSOD like ram, Gpu, power supply, hdd if ur os in hdd, check everything and if u want to try this method then before doing save ur data , make back up of ur all files of hdd

[@kyzaghankarakhazar8330]

thanks a lot for your helpful video my friend, i lost all my data but at least saved my external hdd which is very expensive in my country to whom reading this comment; i was using toshiba canvio 2 tb external hdd by the way, which is my latest hdd that i bought and also the least hdd that i would think i am going to have any trouble, but here we are.. so according to my own user experience, i don't recommend this product to anyone, even my older external hdd never made a trouble to me before, which is an samsung M3 external hdd.. take care and stay healthy!

[@blessedisphenomenal]

Hi. can this clean dirt from my hard drive. I use a 2tb HDD external hard drive

[@s-757gaming9]

Hey can u s help me when I write clean and click enter it says virtual disk error clean is not allowed in the disk containing the current boot system pagefile crashdump or hibernation volume

[@arkantrust]

Man, you just saved my 4TB external hdd, you're great, you just earned another subscriber and share your useful content with all my friends. Thanks a lot

[@NitinTnsGreen]

Thanks for the sub! i happy for you keep watching

[@-WhizzBang-]

Every HDD I tried this on, it worked, but the drive failed again shortly after. There is a reason why the HDD failed in the first place, do you really want to trust a Band aid fix on a HDD that failed once because it is damaged?

[@blessedisphenomenal]

Hi. can this clean dirt from my hard drive. I use a 2tb HDD external hard drive

[@negativespaceboys]

Hi, after I delete volumte my harddisk dissapeard and couldnot create a new volume. pls help.

[@zandubalm2157]

Ooh Woooww...Your Desi British accent is lit 🔥 🤣

[@ramihp5351]

How do you fix issues like your second drive on this video showing Status No media and 0 size? The clean does not work on those situations. The initialise does not work on disk management either. Thanks

[@wallthemart]

For those that dont have access to windows, try to go somewhere with access to pc and internet. Buy a usb drive, download windows onto it using any pc. Use it as a boot drive. From there windows can run and you can proceed with these steps.

[@NitinTnsGreen]

yes right

[@ssbdigitalfilms]

hi, i have 3tb hard disk 4 patition 650 each last partition not showing data, only showing folder no data please help

[@michaelikupa8331]

Thank you so so so so so so much. I really can't thank you enough. I'll just use my reclaime pro to recover my important files

[@NitinTnsGreen]

Your welcome enjoy and happy happy with ur hdd keep watching like share subscribe for more helpful videos. :)

[@eugee61422]

disk part hangs when the hdd i want to reformat is connected. DO you have any work around?

[@Jax.--]

YOU ARE A LIFE SAVER, i thought im gonna have to buy a new hard drive

[@NitinTnsGreen]

:) happy for you

[@PinoyinKSA]

After the “cleaning” part I got an error saying “Virtual Disk Service Error” The object has been deleted.” What should I do?

[@simke3663]

Okay, i didn't expect this, but you actually fixed my problem, so thank you very much :)

[@NitinTnsGreen]

Glad I could help! enjoy keep watching

[@bugslayer-sama]

For real 👌🏾

[@oBlackCoffee]

I have a question for you, after i entered create partition primary it says "The request failed due to a fatal device hardware error".

[@dipanjandutta]

You are a saviour. This fixed my ext hdd problem. Thank you.

[@NitinTnsGreen]

i glad , and your welcome like share the video and subscribe my channel for new videos updates.

[@el_amit]

What about a bad meadia or sector I mean if occurred by improperly shut down etc. Can we use that HDD if it has bad sectors, can we use it for OS or only external use...?

[@josesilver9072]

After trying to find a video on KZbin to help me fix my HDD drive, this is the only video that actually helped me. This does work and is not a scam, just follow the instructions he gives.

[@NitinTnsGreen]

Awesome happy for you enjoy keep watching sharing

[@paulseebach5978]

@@NitinTnsGreen Same for me. This is the only solution. Thank you!

[@sherrisolomon8673]

Have you ever fixed a RCA tablet for someone?

[@lawalmusa8963]

Can u type the commands here pls

[@sjbusiness8119]

While following your method, if we accidentally selected the wrong drive and format it. Can we recover the lost data after that ?

[@NitinTnsGreen]

some data recovery software easily recover data after formet too

[@alexfernandesportrai]

Thanks for the video. I was about to throw away my hard disk and buy a new one . This was brilliant!

[@NitinTnsGreen]

You are welcome! enjoy keep watching

[@trudytriad4574]

What if the dead disc is not even reading? Can you still fix it?

[@daisygupta6494]

Amazing ,awesome ... these all are a little word for this video

[@NitinTnsGreen]

Thank you :)

[@happynut2678]

After it opened the diskpart window I couldnt type anything on that promt. Why is that brother? Please help me

[@mondi4749]

enter the "disk part" command first before plugging in the drive

[@heyhelmet7526]

You deserve all the blessings brother. You saved my hard disk. Thanks a lot brother.

[@NitinTnsGreen]

Amazing your welcome and enjoy keep watching my channel for more cool helpful videos

[@TheBassbill]

I got the following diskpart error message: Diskpart has encountered an error: The request could not be performed because of an I/O device error. Any good advice brother?

[@7snaye39]

Men of the year I just save 10 hdd 3.5 2tb And 12 hdd 2.5. 1tb Thx bro

[@NitinTnsGreen]

that's amazing, great my video help you a lot and thanks for your lovely comment keep watching my channel for more helpful videos.

[@evelyntabliga9584]

The DISKPART on new window is not showing😔😔...also i can type anything. What should i do?

[@KPhlowTV]

Yes brotha.. This video help me so much !! THANK YOU FOR THIS AWESOME TUTORIAL

[@NitinTnsGreen]

Glad to hear it! enjoy keep watching

[@Daakujerry]

Thnq so much brooooi U saved me thnk u broo... Just can't thank you enough 😍😍

[@NitinTnsGreen]

your most welcome i happy about your happiness , enjoy ur fixed hdd, for more cool helpful video keep watching my channel content and subscribe for updates

[@WEEZEE01]

Pls kindly write the steps you use to fix it. My drive is dead it can't see anything but I have important files in it, pls after doing according to the video will the files be there or deleted? 🙏

[@solidsnake76ers]

Question: when i tried to create patition primary it said ( cyclic redundacy check) ...what should i do ?

[@slthisa4282]

Omg!!!!! Thank you soo much bro.you saved my 1tb hdd

[@NitinTnsGreen]

Happy to help enjoy and stay tuned for more helpful videos good luck.

[@akankwasadenis5295]

hello nitin, i have a transcend 1TB external HDD, it stopped working while am watching a movie, now when i plug it in my laptop, i can see all the files on the disk but i cannot open any. it doesn't respond. i have tried to recover data using wondershare recover it software but it could only see a few of my files. i have tried to format the disk using disk manager but it doesn't respond still. any help plz

[@HabiburRahman-hz9fu]

it's work .. THANKS A LOT

[@NitinTnsGreen]

Great , your welcome - like, share the video and subscribe for my all new videos updates .

[@lovegreen7414]

Hello if I follow your steps will this delete all files on the drive. I want to keep my files

[@NitinTnsGreen]

yes it will delete all files

[@bundlenism]

@@NitinTnsGreen if want to keep my files how to do?

[@phantomKE]

Thank you, this saved me alot.

[@NitinTnsGreen]

Yes as always your welcome keep watching :)

[@ayushhh2013]

@@vato2030 why do u mean?

[@shailjaranjan2954]

Hi my hard disk is showing in RAW format. I tried to format it even in cmd also. But no luckCan you please suggest

[@NitinTnsGreen]

i think any hardware issue in you hdd

[@hamzafurqan5658]

Nice Vid... But Rip english 😂😂😂

[@NitinTnsGreen]

Thanks and ya my English not so bright in 2016

[@LogicArray]

Many thanks, I do have q will this technique will work with hard disk which part of RAID group? Appreciate

[@bombsb420]

thank u thank u X10000000000000000000000000000

[@NitinTnsGreen]

Wow haha Your welcome, "you know i feel happy everytime when my any video help someone" :)

[@bombsb420]

i tried so many tutorials. this one actually worked.again thank you. :)

[@tylerdoestech4299]

BIG PROBLEM: I have a Dell Latitude E5500 and E5400. I have two hard drives that alternate between computers. One of them i corrupted. I figured it out by moving it between computers, because I though it was the COMPUTER itself and not the hard drive. Whenever I put the "infected" hard drive in, and start windows, it will sho part of the "starting windows" loading screen before cutting off, gliching a bit, showing a blue warning screen for half a second, then shorting out. It restarts the proccess after a second, but this time it says, WINDOWS FAILED TO START. I tried installing another operation and driver pack to hopefully get rid of it, instead I got a essage saying Windows shut down to prevent further damage. HELP!!!!

[@alban77761]

Hi buddy. I think I have deleted login folder 3 file from windows. And f11 -f8 are error . Do you have any idea ? Try to download the the windows from beginning but no luck ?

[@NitinTnsGreen]

now ur system not boot up or what?

[@MunibBurney-q7s]

i am getting an error message: DiskPart has encountered an error: Access is denied. See System Event Log for more information. Can you please guide me? If I display the 'List Volume' then it does show me the various volumes on the Hard Drive. Many thanks

[@parkerzeras2818]

Hy can i ask. How to fix cyclic redundancy check,after diskpart clean succes,but cannot create partition primary ?

[@Rockychanz]

When you clean the selected disk drive, does it erase all the data?

[@NitinTnsGreen]

Yes it will delete everything so be careful

[@VanessseXY69]

Hi, I need to save my data on my laptop hard drive. I litely taped my mouse on the laptop because the computer was freezing and I was impatient and now its dead. Is there a way I could open it physically and fix it or use a new hard drive part to fix it ? Ty

[@NitinTnsGreen]

try to use some data recovery software for get ur data back

[@VanessseXY69]

How do you use a data recovery software when the computer doesnt turn on ? I cant buy a new computer to fix an old computer $$

[@davidc2683]

Hi Nittin I have Segate external hard drive that it shows in Disk Management as "Raw" Healthy active partition. But when I perforned a Deep Scan with one of the software it shows "No files found" which make no sense I have data on it. My hdd was used from time to time when I needed to copy files and save them. And about 10 days ago I connected to one of the USB port on my laptop which was kind of loose a bit and I did not used the safe removal and I guess from inserting and taking out it became raw. But no noise or nothing. I will appreciate any help or suggestion Thank you

[@NitinTnsGreen]

okay did you try in all USB ports of ur laptop or computer if no try it if still same issue then use some recovery softwares for check ur files still in there or what u can watch my this video for recovery- kzbin.info/www/bejne/o2PEe4Gfa952brs

[@Natural.Medcines]

Bro.After create partiion primary this msg displayed:Diskpart encounter an error: the request could not be performed because of an I/O device error.

[@ginkings1124]

i have a different problem, when i type creat partition primary Diskpart has encountered an error: The request failed due to fatal device hardware error. See the System Event Log for more information. What does this means?

[@krisariesofficial117]

after i did everthing u told. it still end up in windows was unable to complete the format and still whenever i plug it it still saying u need to format before you can use

[@reyschwartz8221]

Is it safe connecting my corrupted HDD with windows 7 inside my current system and doing this trick? ? I currently have SSD with windows 10 and I'm afraid my ssd will corrupt as well if i put my HDD together with the SSD

[@NitinTnsGreen]

no issue u can try just connect ur curupted hdd via usb case

[@samuelikpe6574]

Please each time I open my laptop it will ask me to quickly backup my files and replace my hard drive dice please what can I do?