How To fix broken single pane glass window

[@diannecarr8335]

What size of glass is this window and thickness as well. Mines looks exactly like it.

[@roadglassandmore]

I don’t remember exact size of the window in this video, over all thickness is 1/2 . Measure day light ( glass part that you can see) frame to frame and add 3/4” to it that would give you the size of the glass or if you want to be 100% safe you can remove corner screws and pull frame off and measure existing glass! You can order glass online with 10% off royaltymirror.com/RGS10

[@jake9446]

Hello my names Jake, I was wondering if you would be so kind as to create me a list of daylight measurements and what I would need to account for such as sliders , patio doors and anything else you might be able to think of, I would greatly appreciate this and send a lot of people your way for instructional videos. I will be going into glazing soon and have been studying your videos as best I can but you always seem to know the correct measurements from daylight. thank-you for the great videos.

[@roadglassandmore]

There are many different set ups for windows but I can tell you some of the most common measurements.: Single pane residential windows , aluminum frame ( rubber gasket wraps the glass, and you remove corner screws to take it apart) add 1/2 to day light. Aluminum frame dual pane glass : add 3/4 to day light . Vinyl/plastic windows add 1” to day light, you can do 7/8 also to be on a safe side or if window frame is out of square. Commercial store front . Door glass add 5/8 to day light, 1/4 glass add 1/2 to day light, 1” dual pane add 7/8 or 3/4 to be safe .

[@jake9446]

@@roadglassandmore I appreciate it greatly, thanks a ton !

[@Mjs590]

Where r u located?

[@roadglassandmore]

Sacramento area.

[@daveb1319]

Good video!

[@nogoblackspubgmobile1236]

Hey, I love your videos bro I broke my glass the other day but it's the other one that can't move the other side. I don't know what to take it out of the wall out of the screen to fix it. Do you have a video suggestion? I could use thanks.

[@nogoblackspubgmobile1236]

I can't get it out to fix it

[@roadglassandmore]

There should be two screws outside that hold vertical division bar/ fixed window frame . Here is the link kzbin.info/www/bejne/oqLZgYSoec6Snq8si=GR_Ic8X8HLEyzJwr it’s not the same but same concept, hope it helps.

[@shannongarrison153]

How to make a rubber seal

[@roadglassandmore]

Have to reuse old one or buy new. Also you could use silicone after the glass is in the frame.

[@danieljones-fc1eu]

I guess the Gloves are Optional

[@roadglassandmore]

I realized I didn’t wear gloves when editing the video lol.

[@marilinfykes7558]

😻 P r o m o S M