How to fix Clicking Noise from Rear Hub on Hybrid Bike

This video is for anyone trying to diagnose a clicking or tapping noise with the rear hub while riding your hybrid bike. I couldn't trace the source of the intermittent noise so had to take my bike back to bike man. A versatile and experienced bike mechanic who has fixed hundreds of bikes and is better equipped to fix any faulty or worn parts.
In conversation you will get tips and pointers on how to diagnose and fix the issues which in this case were due to the inner race loose in the rear hub plus worn bearings causing increased friction in the bike's back wheel.
The hub inner race required fixing to the hub with two part epoxy; it would have been a tight push fit but it had lateral movement within the hub causing the clicking sound.
This video also covers servicing the hub, brakes, wheel bearing tightening and wheel truing including spoke tension checking. Other points discussed are Inner and outer race repair, bearing service and bearing replacement. Spokes and magnetism are covered including handy tip using a magnet to check for stainless or carbon steel spoke material.
If you need to fix a creaking bottom bracket then see link to video below.
• How to fix Creaking no...
If you have already replaced the chain and need help to replace the rear cassette see link to video below.
• How to change Shimano ...
A broken back wheel spoke had also been replaced within the last few days before the noise started which was unrelated but a link to this video is below.
• How to replace a broke...
A link for adjusting the spoke tension for a single spoke is below should you need help.
• How to Adjust Spoke Te...

[@paulphotios3920]

Just been down the same path with a giant farugia hybrid. Rear wheel bearings needed doing and the free wheel cassette was dry. Bought a new cassette and problem solved.

[@yuckybear5026]

Pleased you have got it fixed. Thanks for the information 👍