How to fix Funko Pops that won't stand and keep falling over!

Omg, thank you for this tip. I have a lot of funko crooked and this will help me a lot!

[@WhatsPoppingBruce]

You are super welcome! Glad I could help 😁😁

[@j33ms70]

This guy: I check the paint job and I go through piles of pops just to find the one I want. Me: ( With my 3 pops i got off amazon for £5) 😀

[@kt1pl2]

Great video. Non of my pops will stand (I have three) I have tons of blue tack under them. I'm going to try this.

[@WhatsPoppingBruce]

Let me know how it goes! Glad i could assist :)

[@jerseyfanel]

This worked out great for a few of my Funkos that kept falling forward as well. Thanks for the tip!

[@WhatsPoppingBruce]

You are super welcome! Glad it could help 😁😁

[@cobusvanrooyen3224]

Very good idea! And oob is definitely the way to go. Just be careful when displaying them and keep the boxes in storage for when the time comes to sell.

[@WhatsPoppingBruce]

Cobus van Rooyen exactly! I find there are so many details you miss out on when you keep them in box 😄 I also keep the boxes for the cool box art which helps with some displays 😄

[@de1vx-h6m]

Thank you I was really hungry

[@avamathers9550]

Totally agree I unbox them immediately

[@KidOfMischief]

OOOO This is brilliant! I always struggle with some of my Pops and even wall putty wasn't working, it was driving me NUTS! I'll have to try this! Thank you!

[@WhatsPoppingBruce]

You are super welcome! Glad I could help 😁😁 sorry about the terrible video quality 😂🙈

[@user-ft5wx5jn8j]

I’m definitely an out of the box person. Penny from big bang theory and Jovie from Elf. Thanks for the tip.

[@WhatsPoppingBruce]

Out of the box is definitely the way! Glad the tips could help 🤓

[@CalebJanssens]

Yeah, I'm one of the guys that keeps the pops in the box. But I'll admit, they look much better out the box XD

[@WhatsPoppingBruce]

As long as you know the truth... 😋

[@TheZero1312]

I have different Problem. The Funkos in question could stand perfectly out of the box, but the top-heavyness of them makes their ankles bend over time. The culprits are oversized Di Va Meka from Overwatch and the Red-eyes Black Dragon from Yu-gi-oh. It's driving me crazy.

[@CalebJanssens]

Ah flip! This is a great trick. Thanks Bruce!

[@WhatsPoppingBruce]

Thanks man! Sorry about the video quality... haha I guess I nice why of seeing how we all have grown on our channels 🙊🙈😂

[@jessicahayes2921]

this is great! What would you recommend for funko pops with high heels on? Just because those are shaped a little different and I don't wanna do anything weird w the feet until I know this will work hahah

[@WhatsPoppingBruce]

Hi Jessica! It would work the same way for pops with high heels ☺️I’ve also used this technique to straighten pops with swords or other accessories that are a bit skew. It’s a safe method since it basically just softens the vinyl for you to move it in a way that won’t make the parts you want to manoeuvre snap off. It also helps that in many cases pops with high heels often have stands to help you position the figure in a pose that will keep them upright. Just be gentle and don’t be afraid to redip the figure in the hot water if you feel the vinyl is too stiff/resistant to the movement you are applying. I hope this helps and best of luck! 😁

[@jessicahayes2921]

@@WhatsPoppingBruce thank you so much!!

[@juneau2739]

used this one on a bulky pop and it turned out great! :)

[@WhatsPoppingBruce]

That’s awesome! Glad to hear it helped 😁

[@Kylvie]

I recently got funko ellie from the last of us with stand, even with stand funko is a bit bend over to the front that looks a bit weird

[@WhatsPoppingBruce]

Yeah the stands aren't even always a good guarantee... sometimes it's the stands themselves that encourage the bending in warm environments 🙈👀

[@jokerswild9611]

Thanks. Really hoping this works with my flocked beast

[@neophyte_reviews]

I'm one of those that keeps them out of the box!!!!

[@WhatsPoppingBruce]

Samuel Diaz we are many! 😝😬

[@kishajames3527]

I have a FRIENDS Joey cowboy that I just got that I can’t get to stand. I may have to try this! Thanks for the tip!

[@WhatsPoppingBruce]

You are super welcome! Best of luck 😁

[@scrubs615]

any tips for flocked pops that wont stand up?

[@littlemonster1556]

@people if you have a funko pop doll with a silver glitter outfit and the glitter comes off just use silver glitter nail polish it works

[@WhatsPoppingBruce]

#hacks! Thanks for sharing 🙌🏻🔥

[@lucascastelein3348]

I had to make the intentional decision early on to not keep the boxes and throw them away, as difficult as it was for me to do 😭

[@WhatsPoppingBruce]

That's a tough one!! At least you are enjoying your pops out of the box 😁

[@grimtrivium1490]

Recently got super saiyan Gohan and madam hel both have feet where one foot isn't flat and is on its tip toe, afraid to do this a bit but it'll be worth it so they will be able to finally stand.

[@WhatsPoppingBruce]

Definitely worth it, I have done it with loads of figures and never had a problem ☺️ if you are nervous just do it slowly and don’t overheat the vinyl when you dip them ☺️

[@thislittlemissis]

I have the new diamond edition Amazon Exclusive Cher that continually falls, even with museum putty. Since she is the diamond collection, I would be afraid to put it in hot water. Any suggestions?

[@隠れた]

Wat about the female pops the teens to have thinner legs and bodies? I have a Lucy from fairy tail that came with a circle stand and still falls over the pin just doesn’t go far enough in and she just falls over. I debated just putting the set in the boxes I I’m missing the box from one Andy ocd won’t let me have most of the set in boxes while one is out I’m probly gonna just buy a second one and display on boxes because she can’t stand at all

[@WhatsPoppingBruce]

YangYang I get you! I have had that problem with some of Jurassic Park pops... they are just too top heavy to mould and stand. It depends how OCD you are... but my one I eventually used a super strong glue to stick him to the base and the other I store in box! 🙊. Hope that helps! 😄

[@shannongillespie4564]

Thank you. I'm going to try this on my Spider-man: Into the Spiderverse Prowler (Uncle Aaron) Figure

[@WhatsPoppingBruce]

Awesome! Glad I could help 😁

[@xxzoomzoomxx]

I have a mini funko of zombie Magneto. The cape is lower than the fit and I cannot get it to stand at all... any suggestions?

[@albertalbrecht8568]

Does it work when funko falls forwards? 🤔

[@Tigertail5000]

does this work with the jumbo pops? I have a master chief one that keeps falling over! it's so annoying

[@WhatsPoppingBruce]

It has worked for me! Also good for remodelling parts of pops like swords or wands on the bigger jumbo figures 😁

[@Tigertail5000]

@@WhatsPoppingBruce thx

[@Hc4697]

Great tip man you have a new sub

[@WhatsPoppingBruce]

H.Cruzz10 thanks so much! I’m glad you found it useful 😄

[@YJSBMMAMRA]

Does this also work with funko pops with pegs

[@DarkShadow1953]

I'm doing Demon Slayer Tanjiro with his blade out

[@WhatsPoppingBruce]

Epic!!😎

[@littlemonster1556]

I just bought a lady gaga funko pop i love lady gaga and she doesn't stand like yours so i I'ma try this 😂 she doesn't even stand on her stand so i'ma get some krazy glue and glue her feet to the stand with krazy glue 😂

[@0Warpath]

Transformers Rise Of The Beasts Optimus Prime funko pop won't stand. I'll be trying this

[@WhatsPoppingBruce]

Hope it helps!! 😁

[@maxdrums6492]

Will it hold up in the long run or will it go away at some point

[@WhatsPoppingBruce]

As long as the room your store your pops in doesn’t get too hot, it should hold up 😁

[@maxdrums6492]

@@WhatsPoppingBruce I did it according to your instructions and it worked great thanks you really helped me

[@WhatsPoppingBruce]

@@maxdrums6492 that’s great to hear! Glad I could help 😁

[@Nyce4U]

Wow thanks!!!!

[@WhatsPoppingBruce]

No problem!

[@archerdavidson6439]

I wonder if he likes starwars 🤔

[@SilentShowOff2]

How long will that last tho

[@antonydandrea]

My problem is that they stand find, but at the slightest movement fall over

[@littlemonster1556]

i done seen 3 of these videos so it must work 😂

[@WhatsPoppingBruce]

That it does 😂

[@littlemonster1556]

@@WhatsPoppingBruce 😂😂😂

[@bubbamasters1]

I have tried this and my I dream of genie still falls over...what next???

[@littlemonster1556]

you got so many i only have 2 😂

[@WhatsPoppingBruce]

Yes… I have a problem 😂😂😂

[@frostyphantom9998]

Ahhh thank youuu my Magik pop has uneven feet and has ended up balancing on her sword which is bending it😭😭

[@WhatsPoppingBruce]

Happy to help! You can also use this trick to fix the sword once the feet are fixed 😁

[@Duraith]

Me when polka dot man🥺

[@noahderby3338]

Robin LeBron James!!! Why do they even make pops that can’t stand??

[@WhatsPoppingBruce]

This is a good question 🤣🤣🤣

[@frogball5819]

OMFG IM NOT BOILING MY METAL POP REPLICA

[@WhatsPoppingBruce]

I would agree with that idea 😂🤪 if your die cast cap can’t stand then this is definitely not the answer 😱