How to fix husqvarna tank vent problems

Donny walkers tank vent fix

[@donnywalker4691]

Yes mom I need a haircut 👍

[@thebradleysoncatbirdhill6849]

The shop is looking great, Donny!

[@richardf9137]

Another Great Tip!! Many Thanks!

[@waterlover30]

Thanks Donny. You da man. Let's make this 3120 sing like Andrea Bocelli. "Time to Say Goodbye". 😂

[@claytonlemieux4090]

DONNY DO YOU Kown where I can get seals for an old Mac 3214 chainsaw same as Eager Beaver McCulloh

[@jensenwilliam5434]

Thank you Donny 👍🏼

[@johnPrice-qi6cs]

Howdy mr.donny, thanks for ringing in today,great tutorial as always,you are a wealth of knowledge for sure!! Just started gathering husky saws a couple year's ago,been still man my whole life but exploring and running some huskys now,up to a dozen or so, and at 70 still in the thick of it, and yes you can teach an old dog new tricks,been watching buckin for a bit now and man does he got some nice saws to run for sure,I have never had a pimped saw or posted saw,up in the remote Sierra we don't see any of that stuff but want to look into that,got 2 390's one is tore down for overhaul and one is a real screamer,will try to get the one back in shape soon,can I get a couple of them pipes from you???? I see buckin running them 70CC saws for bucking pretty big trees but it's asking a lot fir them saws but with the power he's getting out of them hot rodded up is fun to watch,don't get me wrong my 044 is always my all around saw with a 28", but I still use the 660 and 084 for all the bigs,don't like to put the hurt on the 70CC saws because when you are married to her you dont.want to hurt her on purpose!!! Just saying!!! The big saws are heavy but just feel like easier going to me!!!! Kind regaurds!!!Sierra.John

[@donnywalker4691]

Thank you 390 saws are good and I love Stihl’s as well are you looking for tuned pipes or work piped mufflers

[@eddiemorquecho2074]

Great Vid, Mr Donny! I will definitely Order the Vented Fuel Cap. Embarrassingly, I started to remove the Fuel Tank Vent (above the Fuel Tank) and I don't know what I'm doing, obviously. Any ideas on it's removal? I do have a Fix for it But I like your Vented Cap better. Thanx for any help.

[@mark5821]

Donny I have quick question for you. I’m running an 87 266se that runs and cuts like it should but bubbles fuel out of the new oem tank vent whenever I move the saw around or fill the tank. It always starts first pull and cuts fine. I been told it’s the fuel cap itself so I’m waiting for the oem one to arrive and I also been told it’s an old husqvarna and thats what the pre epa saws did. Thank you.

[@j.chrisbeck7492]

This cap, will it work OK on the H372xp clone saws ? Although mine is working fine at the moment....there will probably come a time when it doesn't....

[@tomknapton5051]

Could you do that kind of vent on a 262xp ??

[@user-ul8jt5rq1f]

I was having a vent issue that I solved by turning the saw upside down and spraying off the vent with brake cleaner and then carb cleaner. It seems to have fixed the issue, at least temporarily.

[@jreif14]

Hey Donny, looking at getting either a 661 or 395 for bucking firewood. Would either be better than the other on this application? Thanks

[@donnywalker4691]

You must have big firewood I run 372 and a 462 for firewood and of course my favorite 357 husky but of course have big ones for large wood

[@jreif14]

Yes we have a tree service that drops off to us and they bring some big wood. I currently use my 500i with a 28” bar and have the bar buried a lot of the time. Was just thinking of getting something a little bigger, so it would be less taxing on the engine. Or should I just get a bigger bar for the 500?

[@donnywalker4691]

Put a 32 inch light bar on 500i but if you want bigger get 661 over 395 put a bark box or something similar on it

[@jreif14]

Thank you!

[@robertblacksmith4355]

The exhaust pipe reminds me of my muffler I had on my 1980s Suzuki RM 125

[@hollywalker3132]

Wasn't,t going say anything maybe because I think I need a cut also

[@donnywalker4691]

Ha ha I shaved the fur off face

[@johnPrice-qi6cs]

Howdy mr.donny,that was pipped or ported in my last comment not pimped!!!

[@hdhhc5555]

Hello sir. I have a 500 I that is leaking gas out of the steel tube on the injection pump when the saw sits and its hot in the shop. Is that normal or do I need a new injection pump?

[@donnywalker4691]

New to me weird

[@hdhhc5555]

@donnywalker4691 well I put a new injection pump on it. And no more gas leaking. Must have a pin hole in something inside it. But anyway. Happy Friday my friend!!

[@donnywalker4691]

I’m glad it worked out

[@nathankelly7259]

Hey Donny are the kings running out there? I think you call em chinook. They are disappearing in parts of Alaska…naknek River

[@tylerheard1279]

Same here in Michigan. The runs are a ghost of their former selves😢

[@nathankelly7259]

@@tylerheard1279 overfishing I would imagine is the cause…& bycatch. Shame. Hope they come back

[@tylerheard1279]

@@nathankelly7259 I kind of doubt that. The DNR is throttling back on stocking. What do you think the cause of the decline is in AK?

[@nathankelly7259]

@@tylerheard1279 I think overfishing, bycatch & water temp rising is causing it in Alaska

[@donnywalker4691]

The pinks are here coho and yes springs which people call kings

[@dicktomasko1553]

will it work for a 272 oil cap? thx

[@freehandjob1976]

Stupid question here but I'm stumped. I have a piece of 1300 dollar buyers remorse called a Husqvarna 572xp. Anyway latest issue is the purge bulb isn't filling and the gas tank is building up pressure. Saw runs fine when I pour gas down the muffler. Help