How to Fix Mouse Wheel Scrolling Problem | Legion M200 Gaming Mouse

[@paulminter3511]

Duuuude, you're the only guy I found to actually show how to do it properly !

[@MrBloopy]

i have been having this problem for atleast 2+years and this video helped me fix it, with my mouse the same problem was worse then shown in the video, now i can actually scroll :)

[@bappyrajr]

Best mouse scroll repair video on KZbin. 👍 Just repaired my MSI Clutch GM11.

[@KirubelTamene]

Thank you man God Bless you!!!! Thank you very much! one tip I have for those of you that's going to open your mouse when you detach the cover put much attention to not folding it very much! if you did once you finished you will stop feeling the scroll in your hand, it'll be very smooth! and again thank you, the world needs more people like you Keep up the good work!

[@DIYwithAK]

That's a great tip.

[@hammadahmad1137]

Oh shit. I did it and now my scroll wheel is smoooth. But its working fine so I don't care lol.

[@ParGellen]

Thank you for showing the inside of the scrolling mechanism!

[@jozi-pg3tj]

My god It's been years I've had this problem! It only took a few minutes to fix it, thank you very much.

[@jaredkaye3669]

Thanks. I tried fixing the scroll different ways but taking apart the scroll was what fixed it. I accidently lost the clamp to one of the ribbon cables. Fortunately I had a spare band aide that I cut with scissors to put 2 layers on the blue plastic ribbon inserting end. It is wedged in place with a little more band aide taping the ribbon in a 90 degree fold holding the cable in place. Good work on the video.

[@dakshinacaumal2062]

broo thank you soo much u just brought us a real answer i watched and repaired yesterday night wheel not working today morning i fixed with ur video thnks a lot dude love you their was dirt in the wheel clean and works fine now THANKS A LOT AGAIN LOVE FROM SRI LANKA ❤❤

[@01adityasg92]

Before watching this i didn't even know how to open these type of rgb mouse and now i thank you that this helped me. (btw i did it without removing the ourter cover of rotary encoder switch). scroll wheel seems more smoother now by feel

[@DarkReaver13]

did this for my death adder, cleaned the springs and lifted them up however, I ended up breaking a couple of prongs that held the spring wheel on the encoder but there were two more prongs that were able to be pushed back in place without breaking off, works great again. Thank you friend.

[@DIYwithAK]

Glad it helped. And yes those prongs are delicate.

[@denmarkcunado3684]

I just tried it to my 1 month old alienware mouse 610m!! and it fixed the problem. Thank you so much

[@Lunaticsystem]

Finally a good video to end this mess with my scroll wheel! Had a Corsair Harpoon with exact the same problem! All runs well after that tutorial 🥰

[@philtuggle2109]

EXCELLENT - Thank you! You nailed it - I have a J-Teck Digital (kindof a vertical erogonomic wrist-saving mouse), and this was THE solution. You are my hero... well, today.

[@DIYwithAK]

Thanks for the kind words, I'm glad it worked for you!

[@hammadahmad1137]

Oh My God!!!! It actually worked. I had the exact same problem as you and It was annoying af. I followed you and now my mouse wheel is working perfectly. It made my mouse wheel so smooth like there is no clicking when scrolling. I'm not sure if it was like this when I bought it. But it is working fine now so it's all good. Thank you.

[@prashantv4444]

Thank you for showing the insides of scroll wheel now I know whats inside and can safely fix my wheel.

[@leesqueue1180]

Yes, this is exactly what I did. It helped me so much but before I did those I didn't exactly know what I was doing and I thought why not "Let's improvise if this breaks I buy another one" and after some minutes taking all the parts I suddenly saw a looking copper that has a broken arm just like the video a circle kind of copper that spins around when scrolling after that I decided to bend it so that it will reach the edge where the arm usually scratches itself to read the input of scrolling. But now, it's working perfectly fine and no more stressful gaming when playing AAA games and I'm so happy because I fixed my own stuff just doing it by myself. TIP: When you want to understand the function and try to fix any hardware device or tools you should analyze it first and look into it carefully before moving and touching the parts. Try it. Just want to share this because I'm very proud of myself.

[@DIYwithAK]

Great tip. That's how we learn.

[@renatrsr]

This guy is legend. Fixed MSI GM08 DRAGON. saved 20$

[@antonismalapanis]

thank you so much bro i almost broke the decoder but in the end the wheel was so smooth i didnt expect it to work. i subed and liked

[@Tox_0998]

yo thank you so much bro ive had the same issue and this video fixed my mouse i am so greatful that they made you. you are such a good technician i hope you help some more people like me. THANK YOU!!!!

[@amirprogamer3226]

Thank you very much for this repair tutorial ,it helped me fix my mouse

[@khairul-Ismam]

MAGICALL!!!!!!!!!! my mouse wheel just fixed while I watching this video >>>>>>> hahaha.. i know the error will return ,,, thanks for your uplift ! i will go for some repair technique also ....cheers!

[@Shun_Bey]

It just worked for me and I fixed my current mouse and an old one, thanks a lot!

[@wearee-sportspalyer1778]

Thank you so much. Now 2023 it still works. 😍😍

[@cristiancerami3447]

It just worked for me and I fixed my GTX 105 IZZA mouse (despite it has the encoder case soldered on the pcb and I struggled to fix it without having to desolder that piece), thanks a lot!

[@Arm-x5i]

Worked like a charm ... Although not smooth like it was before but i dont have to buy a new mouse because of a faulty scroll wheel

[@Bernardos2002]

OMFG, this is the exact problem i had, i just did that (with much less care because i thought the mouse was broken for good), and it actually worked, same problem with scrolling down and it going up, B-Hop king i back baby, no more switching weapons when bunny jumping in csgo

[@DanGamingPH]

omg thank you so much man. i almost replace my mouse, thanks for this guide i save money.

[@mohammadhusseintaaghi465]

Thank you !! Im not even good with thees kind of stuff and i figured it out , you saved me from buying a new mouse , again , thank you

[@daedaluslv2032]

For a mouse this expensive, this is unforgivable, but at least we have this video. Great! Edit: You're lucky man because my mouse is a different version. It has only 2 screws and no screws for the board, so it's a risk. And the ringy thing is not removeable because it's soldered and desoldering it will probably melt it. So I'm not going to buy any MSI products anymore. #rightstofixit

[@DIYwithAK]

Yes. It's tough when they manufacture it in a way that cannot be repaired

[@AKUTO-GOD]

absolutely the best repair video thnks a lot . fixed my redgear a 15

[@DIYwithAK]

Great to hear!

[@alpbagc5992]

Thank you man you saved my mouse

[@Asmar_gaming]

Thank you very much for that simple and helpful video 👍🏼

[@donatelo0110]

maked this to a msi clutch gm10. worked pretty well, thanks!!

[@ShaktiThapa]

Thanks, Mam. It solved my problem in 2 minutes.

[@MD.MoshiurRahman-lt5qf]

thanks for this problem solving vedio...it works properly..

[@PGSPOFFICIAL]

best and thanks bro it helped me saving my money and time you deserve it thanks

[@PGSPOFFICIAL]

one more subscibers keeo doing well

[@SulemanAdamu-z3t]

Your video just helped me out, thanks for making this video

[@silviubuz3265]

thanks, i fixed my mouse this way is now working as new , i hope this fix to last long

[@DIYwithAK]

It does. I fixed mine more than a year ago and my mouse held up really well. No issues after

[@Fabtonyindia]

Bro thanks 👍 for this I have archer tech lab recurve 300 a very costly mouse for me but now I have hope that my money not going for waste

[@akifjavaid5044]

Cool demonstration - good work - I will try to get it fixed by someone, since I don't have the tools

[@Avinash4712]

If you don't want to open the mouse wheel completely, you can simply open all four screws of the mouse and blow on the sides of the wheel with an empty pen.

[@mominmohsinali7564]

Thanks a man! 😁 It's working

[@omartaher4014]

You're a life saver !! My mouse a bit different, the bracket was soldiered to the board i couldn't take it out so i just blew on the encoder and it worked lmao

[@black.sheep.4]

i have a problem with mouse clicking, the same mouse. im not sure how to fix it, but scrolling seems to be fine

[@lfab1369]

Thank you a lot for short and really usefull video without any bullshit.

[@IssiahHarrington-t9z]

Just wow bro your youve made my day dont have to spent money on a new mouse

[@adamus9277]

It worked for me! mine was similiar but they soldered the metal guard/holder in to the "mouse motherboard" so it was diffucult to get that part out and put back in, mine was dirty too.

[@AndrewKomashko]

Thank you so much, mouse wheel works perfect 👌🏻

[@christianthea1059]

thank you so much! this worked for me

[@gorgheus]

Worked great with my 3DConnexion Cadmouse!

[@netheex]

Hey man, Thanks for the well explained video. It helped to fix my mouse. I cannot describe the feeling after it got solved. Altough, I think I might have folded the little bronze things way too up so my got wheel got way too stiff. Would it come back to it's normal stiffness?

[@DIYwithAK]

That needs to be seen. Most probably the stiffness will reduce by a bit but not go back to how it was before.

[@netheex]

@@DIYwithAK It came back to its normal stiffness. Its a HP Gaming mouse. though the problem I am having is that the first scrolling doesnt detect and It needs to be moved 1-2 slides to do one 1 slide.

[@DIYwithAK]

If it happens everytime you scroll then most probably need to adjust in system settings for mouse.

[@netheex]

@@DIYwithAK I think its hardware issue. Again It detects one input of scroll each 1-2 scroll randomly. O don't know if there is an software option to do this as well

[@emreyaman5336]

thank you so much i was planning to throw away my mouse it really worked appreciated

[@yo4199]

thanks, it works perfectly

[@sorinsuba]

If you can't find a new encoder, this is a good fix.

[@talhatayyab3222]

Big Thanks ❤️ it worked for me havit ms 1027

[@whatever_mp]

worked well for logitech g403s. My scrolling was wrongly going up and down in every few clicks. Now scroll is very good but, I lost the clicky feeling probably because i messed up the little metal part.

[@Mustdowork]

very helpfull. thanks

[@vinnyjulka735]

Will this also work on Logitech g102 ? I have same issue with this

[@tumimbanghymarvannd.8603]

Thanks it worked!!!

[@adraoui2036]

Thank you man had the exact same problem as you may allah bless u (from muslim brother may allah convert u to islam ) Thank you very much

[@aux2970]

Allah don't exist

[@HansSamTonyJohnnyHerkelFrank]

perfekt , fixed my mouse i'm pressing like button right now

[@imrannazir5585]

This worked for me. Kailh 11mm encoder wheel. Rapoo wireless mouse.

[@maikmukki3455]

Thanks for the good video. The Microsoft Ocean Plastic Mouse uses exactly the same system. What a cheap construction for a heavy used scroll wheel👎

[@MTareq1]

worked like a charm thx 🥰

[@burgunstuy1026]

Just cleaned my Legion M300 Gaming Mouse. The outer cover of the rotary encoder switch cannot be removed as it is soldered to the pcb so I just bended it long enough to remove the scale wheel cover and the wheel itself. I fixed the backtracking scroll issue of the mouse but there is no more friction when scrolling lol, at least its working

[@DIYwithAK]

Yes you may lose the friction or steps in the scroll wheel but it will save the mouse.

[@florineel123456]

top ! thanks you very much !

[@Mharun-jl3on]

Extremely helpful

[@shubhankarsardeshmukh3566]

Niceee broo...this helped me fix my wheel

[@DIYwithAK]

Kharach ka

[@manhtuanhoang7883]

This actually work !!! Thank you. My mouse works like a charm now

[@Iamyou752]

works*

[@maiklss5932]

Огромное огромное спасибо!!Разобрал,подогнул,почистил,собрал обратно и все прекрасно заработало!!А я уже хотел выкинуть))Еще раз спасибо,подписался 🤝

[@acspirit56]

it helped a lot. thanks.

[@aidilikhwan8042]

Thank you very much 👍👍👍👍👍

[@zainarhn]

Thanks, it works

[@MrLitino]

can you show how to fix when legion mouse side button is faulty

[@AmanCo.009]

Thanks ❤

[@dmscreation]

thanks

[@nikhealnaidoo6210]

The bottom side button is broken...how do I fix it ....please help me 😭

[@pylgn]

thanks, you solved my problem. I broke the mouse and bought a new one.

[@a_zaharievzahariev4510]

god bless you man

[@abualmaruf8901]

tnx its work

[@aokiinsenpai]

Is what is done in this video also valid for "legion m200s"?

[@DIYwithAK]

Should technically work with any mouse

[@adityabrahmbhatt9188]

The clicks do not work sometimes when i play games. Any solutions?

[@ShawnJonesHellion]

If the contact button on the board is not clicking when pressing: new mouse/warranty. If it's clicking but randomly not working try cleaning the area around the click button on the board. An check to see if the plastic part is broke an epoxy/add/replace with-add some cheap stick

[@عبدالرحمنمرجان-ل2س]

الف شكر جربتها واشتغلت ميه ميه

[@DIYwithAK]

Good to hear it helped.

[@Anniekunji]

i have the same problem, but my mouse is a different one and I'm stuck at the removing of that rotary encoder since mine is soldered in and covered by the left mouse button

[@DIYwithAK]

Someone suggested me to disconnect the mouse and use a little bit of WD40 spray. And let it dry off before using again. You can try this.

[@Anniekunji]

@@DIYwithAK i dont have wd40. if I'm right, its not in stores near me

[@edulahamed5578]

thank you so muchhhhhhhhh

[@sleepless8823]

My mouse is hyper x pulsefire fps pro and the cover of rotary encoder is somehow soldered soldered to the board :((

[@Nojyar]

My mouse sensor stopped working? My scroll wheel is fixed though

[@callmeprofessor001]

thanks buddy

[@riteshmahashabde]

thank you

[@ahmedadel-ow2iw]

it worked thank you

[@olivernyambi5352]

What sorcery is this, it worked 🤓

[@Noisybeetle17]

thankss brooo

[@BlatentlyFakeName]

All you need to do it blast it with electrical contact cleaner, you don't need to take it apart. That will do the job and doesn't leave residue behind.

[@DIYwithAK]

Didn't know about it, thanks

[@janz5715]

it wasnt enough for mine

[@ShawnJonesHellion]

Hes extending the contacts too. In case they are pressed down too far

[@sreeragkk3354]

worked for me

[@nicholascortese9446]

6000 year old invention and we still can't get it to work properly on a mouse. I think I got a solution to patent.

[@thekorganut]

My problem is a little different. The problem is that the pulley itself is not connected to the encoder or to the rotating gear that you remove and clean. What is the solution?

[@DIYwithAK]

Hello I am not actually aware of that kind of setup. I'll see if I can find some info

[@aldrakegabrielferrer2490]

i cant scroll down or up

[@Aarishkazi]

tyanks

[@Dxrd]

try it with a havit mouse

[@ifanu]

goog

[@ifanu]

good, its works

[@WøLfie-7YT]

Thanks now my mouse doesnt even work

[@ShawnJonesHellion]

If i had a dollar for everytime I wasted 1-1000 hours learning something I'm only gonna do once I'd be rich. But I'd rather just have my life back