HOW TO FIX OR REPLACE A LEADING EDGE BLADDER OF A KITE.m4v

[@kevinbradley9601]

Great video. One of the best on bladder removal/installation

[@nalusurfa]

Exactly what I needed. Thanks for taking the time to make this video; it was very helpful.

[@Capt.R.K.]

Awesome video... thanks for sharing !

[@joecz3918]

Hello.. Is there a sealant available to seal the drain valve where it attaches to the bladder? Thanks Jc

[@scislawj]

This is so perfect!!!.i need to take my bladder completely out to fix all the valves then re-use....is it ok to mark the direction...say right left north south with permanent marker or would that hurt the plastic??

[@chrisklein21]

hi. great video. thanks. where can i get a new bladder for my 2011 Airush Varial 10 meter kite on the internet

[@southpaw7475]

Thanks for the video. All your videos are very helpful, and your riding is Bad Ass! 👍

[@epickites]

You have 2 ways of doing this. One way is close the clips of the one pump valve that goes onto the Struts and then pump the kite. Or just pump the kite first with out locking the one pump and see where the air comes out. But the best way will be to close on the ONE PUMP VALVES that goes to the struts. To allocate the hole.

[@chrisklein21]

great video. i have taken out the bladder of my 2011 Airush Varial 10 meter but everytime i put the new bladder in and pump it up it the bladder is twisted. any ideas? also what size is the cardboard?

[@epickites]

Hello "ShakeNBakeBay" it's always easier to lock the clips to the strut so you isolate the strut. And by doing so you can find where the leak comes from.

[@Vik13081984]

I love this something-heavy-buddy :)

[@pneumann4195]

I'm looking at repairing leading edge with one-pump system. How would you close off the holes for the struts while checking for leaks on leading edge?

[@epickites]

Check our www.epickites.com web page under HOW TO videos and you will see a video I made about that.

[@shakenbake1869]

...how do you check for leaks if you have the strut connections open...good guide otherwise.

[@scislawj]

also my bladder doesn't have a place to attach string or insert the cardboard, maybe could I hole punch the cardboard to attach the string and tape the cardboard to the bladder

[@epickites]

Hello Joe Chaps. Yes you do have few things you can do. The best thing to do is to contact KITEAID and they will get you these patches.

[@epickites]

Hello "chrisklein21" if you are looking for an AIRUSH bladder please contact AIRUSH. This is Dimitri the owner of EPICKITES. But if you need more info email me at: dimitri@epickites

[@StephanFilms]

Check out: www.kiteaid.com/bladder-valve-repair-kit

[@robertrecco3191]

Those are dinosaur valves new kites today have big intake valves video must be old

[@epickites]

Robert, this video is 9 years old.

[@Ethanhall100]

I need to fix my kite but I dont have a dog to help... Damn... guess I just throw it away.