How to Fix Reserve Camera Glitchy or Distorted Display | Android Radio

Glitchy display caused by reserve camera resolution in Android radio. The fix is done by changing the Reserve system settings in the Android radio. I hope this helps someone out there!
Support my channel, purchase directly from our online store eazidiy.square.site/s/shop
**7 inch Radio (use promo code EAZIDIY10 for 10%) eazidiy.square.site/product/7...
Dual USB QC3.0 Quick Charger eazidiy.square.site/product/q...
Dual USB/ USB-C Male to Female Cable eazidiy.square.site/product/f...
200W Dual Ports Mini USB Type-C Car Charger Cigarette Port: eazidiy.square.site/product/2...
Kindly use my amazon link below for your purchase(s), it helps me with a little commission. Thank you!
amzn.to/3vRirMP

[@Laita_Snapp]

Perfect! Your video saved me a bunch of headaches and time. I tried everything and couldn't figure out why my video was scrambled, and was about to rip it all out and order a new replacement. Man, you saved the day. Thanks for posting your video! It was exactly what I needed to get my reverse camera fixed.

[@eazidiy]

I am glad to found the video helpful

[@SeniorBombero]

Hi, I also changed camera thinking mine was defective, but after watching your video, I rushed out and following your excellent guide, I fixed my issue. Thank you very much for posting this video! 👍👏😀

[@eazidiy]

You are welcome, I am glad that the video was helpful 😊

[@davidbiemer1689]

Thanks!!!!! Your video helped me out! Thank you for not adding a bunch of useless dialog. You got right into it and let us all know what we need to do!!!!

[@eazidiy]

I really appreciate your positive feedback. Thank you

[@lukaszhruszowiec6625]

Thanks mate, that was helpful, I couldn’t find reason why my camera didn’t work. Now working perfect.

[@eazidiy]

Glad it helped

[@DJSHADROCK]

Thanks for this video it helped alot... not even the technician could figure out why the camera not working

[@eazidiy]

I appreciate positive feedback 🙏🏾

[@ssimons]

Thank you. Finding the settings screen was different on my unit, but sending me to the factory settings eventually got me there. 👍🏻

[@eazidiy]

I am glad the video was helpful.

[@ascension6142]

Thank you so much . My android radio wasn’t exactly the same as your as far as settings, but it’s definitely in that portion. You said it was. The “ factory settings “you just gotta know the code which should be in the guidebook. To access those settings.

[@eazidiy]

Appreciate your positive feedback

[@troybutler9768]

Aww man!! Thanks so much for that tutorial! I was stuck like Chuck on what to do, thanks again brother!!😊

[@eazidiy]

You are welcome

[@JR-tl8tg]

Thank you friend, your video helped me. In my case my camera works sometimes then other times blankand I was about to replace the 10 pin rev cam connector thinking the cables were strained. thanks to your video I am able to fix this.

[@eazidiy]

You are welcome! I am glad to hear that the video was helpful 😊

[@dongolad7437]

Thank you so much for saving me from the headache 🙏

[@eazidiy]

You are welcome!

[@shreenilpatel376]

You saved me man! I have changed 3 cameras thinking that camera is broken! Though my factory settings screen was little bit different from you, your video helped me a lot!

[@eazidiy]

I am glad you found the video helpful. Thank you for the positive feedback

[@STFURIDE]

My factory settings is different than the one on the video too.. How u change to NTSC?

[@eazidiy]

Find the reverse settings, and change the video to SD or NTSC

[@STFURIDE]

@@eazidiy will check it out. Thanks#

[@qman2279]

Thanks for the video very useful information. Had the same issue and unfortunately ended up returning one camera before I realized it was a formatting issues.

[@eazidiy]

You are welcome 🙏🏾

[@4581103992010]

thank you for making this video, exactly what i encountered and i thought there was a faulty wire

[@eazidiy]

You are welcome. I am glad the video was helpful.

[@eleksprint6495]

Thank you man. Really help with me. 🤝✌️

[@eazidiy]

You are welcome 😊

[@itsbtunes]

THANK YOU!!! YOU SAVED ME. But now I have a weird problem. Everything is mirrored 😂 it's so disorienting

[@eazidiy]

There should be settings to change reserve mirror. It is a tongle button, mirror on/off

[@yv0452]

Did u find the solution man ?

[@robmulally]

If its not a setting it can be a green wire yo have to snip near camera u​@yv0452

[@techdegenerate]

holy crap you are the man, almost was on the 3rd camera.

[@eazidiy]

I am glad it worked for you

[@mackmack3577]

thank you, I was having a hard time with my rearview camera, and almost returned my unit

[@eazidiy]

You are welcome

[@ajith762]

Thanks a lot man. You saved me❤

[@eazidiy]

You are welcome

[@blakebearish3661]

it worked! thank you so much I thought I broke the camera.

[@eazidiy]

You are welcome!

[@cristhianatoche6256]

You are the best bro !!!

[@eazidiy]

Thank you!

[@hoseaembury2071]

Fixed mine as well! however, mine was on a lower quality originally, and I had to put it to a higher quality.

[@eazidiy]

Great attention to detail! Thanks for the feedback. The resolution of the camera must match the radio.

[@ugurbuyuk5138]

Thanks you save my time 🙏

[@eazidiy]

You are welcome

[@cesmendoza03]

Thanks brother I spent hours trying to figure out what was wrong. God bless bro!

[@eazidiy]

Awesome! I am glad the video was helpful.

[@21Ady21]

Maaaaaaaaaaaaaaaaaaaaan thank you !!!!!!!!!!!!!!!!!!!, it fixed my problem

[@eazidiy]

Awesome, I glad the video was helpful. I appreciate your feedback.

[@earlskie78castillo77]

Will the factory sd back camera work in an aftermarket android HU? Mine doesn’t work as I would like to retain the factory camera to the new aftermarket HU from china. My car is a 2016 holden trax 1.4L ltz fwd

[@eazidiy]

Most times factory camera do not work with aftermarket headunit. You may need to wire aftermarket camera for the headunit

[@mikeortiz-lovelace1452]

This worked perfectly. I ordered three other cameras, thinking it was the cameras, but it was the setting. Thank you so much for your video!!

[@eazidiy]

You are welcome.

[@robertjohn2249]

Would a 12v inline filter/rectifier fix the cyclowarp my camera is doing this to but when I change to pal or NTSC it makes no difference

[@eazidiy]

Do you have a video settings named CVBS? Also, what is the resolution on your reverse camera? Yours may require to choose higher settings than NTSC or PAL. Always check to know the resolution of your camera.

[@kisnix]

Ty for the help.

[@eazidiy]

You are welcome

[@yazanmashhour9451]

Hi dear, I installed the camera and it works. However, unfortunately as I put the gear to reverse the Radar UI of the parking sensors hide the camera view, and only if I turn the parking sensors off the camera will show. I did all the setting in the right way, could it be a problem with the connection or is it pure software issue? Thanks

[@eazidiy]

It sounds like software issues to me. Can you send me a picture of what you see at [e-mail]

[@marquesemelvin2425]

Quick question for u brother. I can’t enter my factory settings bc the screen is too zoomed in so the “ok” button after entering in the password isn’t popping up for me to go forward. How do i zoom out the screen so all the buttons show?

[@eazidiy]

Kindly seek the manufacturer manual for the setting

[@kadeventers8060]

Thank you!!!!

[@eazidiy]

You are welcome

[@usasoccergoalie]

Hi , when reversing my unit shows the left side rear view as the right side on my screen. And vice versa showing right on the left side. Any help ?

[@eazidiy]

Check the setting that says reverse mirror, toggle it off. If not the settings, there is a green wire near the camera, cut it off.

[@kijijiuser4173]

I know this is old post, but im wondering how to fix a low voltage for the car. The back up camera works when its not running. But when you turn the engine ON, it will say NO SIGNAL. Simply the voltage drop. Need help please

[@eazidiy]

It sounds like you have a wrong connection with your reverse camera

[@kijijiuser4173]

@@eazidiy its actually working, but the video itself still flickering when the engine is running. however, never had an issue when i just turn the key ON

[@drnotboot]

Does this radio drain your battery? I had to install a relay to keep it from constantly draining my battery.

[@eazidiy]

No! If your battery drains, you must have a wrong connection in the power harness.

[@Mykhaiel]

Hi, i got same problem but my new rádio, tablet or how to call it doesnt have the reverse settings in settings so i cant try your solution. Anything i can do ?

[@eazidiy]

Did you check the factory settings? You need to know the resolution display for your radio and get the camera of thesame resolution or lower. Anytime above the resolution will cause distortion.

[@blakebearish3661]

I had to flip through a few different menus to find the camera settings if it has a password to access it try 8888

[@MrTuutiee]

My Android radio doesn't even have these settings, but it does have a glitchy image, are there other options? It worked well on my previous Android radio, but it broke

[@eazidiy]

You must find the settings to change the resolution of the camera to match the radio. Sometimes the settings is under video settings. Just look for it and check the manual for the radio.

[@MrTuutiee]

I have now found it under factory settings problem solved 👍🏻 which is strange with this radio, when I use the turn signal it also turns on 😅

[@eazidiy]

Glad to hear that you got the problem resolved.

[@eazidiy]

The turn signal feature is to assist you to see what is behind before making a turn.

[@MrTuutiee]

@@eazidiy thanks alot

[@itisaporsche]

I have a new Android 12 unit. I had to go to Cam Type (change to CVBS) and Cam Format (change to PAL). Each camera is different. I kept trying combinations of these two settings until one worked and was no longer scrambled. Also getting to factory settings was a bitch on the newer units. Go to Settings Car Infotainment About Device (scroll to bottom) then on top right there is another Settings icon, Insert code 8888, then "Backcar Setup, then you will find Cam type & Cam format. I installed the unit in my Ram in 15 minutes since I did it before, but finding the right camera setting took 1.5 hours.

[@eazidiy]

Thank you for adding this helpful feedback. Depending on the Android radio, the camera settings are different. The key is to know what the resolution of the Camera is and match it with the one in the radio. Most people do not pay attention to the description of the camera resolution when buying online.

[@itisaporsche]

@@eazidiy You are right. Your video saved me. It always comes down to camera settings.

[@eazidiy]

I am glad to know the video was helpful! Thank you for supporting my channel.

[@wintechandrew]

Hi,,,i installed my reverse camera. When i use reverse gear nothing happening no screen...But when i select in menu AUX (manual) mode it work...whats wrong?:S

[@eazidiy]

Does your android unit have 2 camera inputs? Front and Rear camera inputs? It seems you plugged the camera feed into the wrong input. Please check your connections

[@wintechandrew]

@@eazidiy ok! ty! i will check it!

[@gregchery3255]

My android head unit don’t have camera reverse setting or to choose different camera. Help

[@eazidiy]

Did you check the factory settings? Sometimes it will be in there.

[@chrishaworth207]

I'm just getting g a black screen on mine , screen changes but just to a black screen ..?? Any ideas??

[@eazidiy]

Check your connection of the camera to the reverse light. There may be loose connections somewhere. If your camera has a light, check if the light come up when you put the car into reverse.

[@crystalwoods2211]

I have that exact head unit in a 2012 toyota highlander. I can't get my steering wheel controls to work.

[@eazidiy]

Go to the steering wheel control settings

[@warwickjamesAUS]

You wouldn’t know how to change the aspect ratio of the camera picture? I’m using the factory camera and it stretches across the 16x9 screen

[@eazidiy]

Actually, I have not seen aspect ratio settings on my reverse cam. I will take a look at it.

[@Spork123able]

I now have a black screen, since adding a backup camera. The screen briefly flashes when car started, but no display shows

[@eazidiy]

Check your wire connections

[@lucianlucuta]

Hi there. Did it happen to anyone that the navigation had no video source/resolution settings?... I bought a 2gb32gb navigation from Mekede, the system info shows be the device as alps 8227l_demo. When entering the factory seetings, I have no options for video source. I also uploaded a video on my canal with this issue. If anyone can help me, I would appreciate it. Thank you.

[@eazidiy]

You may follow me on Instagram @eaziteks. I can do a video call with you to check

[@lucianlucuta]

@@eazidiy thank you. I can't wait to see your reaction regarding this issue 🙈

[@lucianlucuta]

@@eazidiy could not find you on Instagram though... Help me with this, please. Thank you.

[@eazidiy]

Search eaziteks on Instagram

[@lucianlucuta]

​@@eazidiysorry, I was searching for @eazidiy 😂🤦

[@thereisnothingtv1105]

I wired up the camera correctly but when i put the car into reverse the home screen stays the same nothing happens at all only the camera goes on but the home screen shows!! What to do please help?!

[@eazidiy]

Did you use a cable splitter for the connection? If yes, that may be the issue. Sometimes the splitter do not make contact with the wire inside. You may need to reconnect all wires without splitters.

[@eazidiy]

Connection at the Reserve light of your car is crucial because if there is no signal to the Android radio to go into reserve mode, then it won't work.

[@fayisajohn7176]

there’s a small wire in the head unit that you have to connect to the back up camera wire, that will make the screen switch by itself, that might be the problem

[@ahmed232323able]

It works but only partially with this fix.. so I do get reasonable quality but the camera keeps freezing..

[@eazidiy]

That might have something to do with your headunit. What brand of android unit do you have? What is the RAM size?

[@mohamedd6208]

I don't find that option in my display. Can u help me plz

[@eazidiy]

Check the factory settings on your headunit

[@jamesh6922]

I have the exact same problem, but I went to the head unit and there is no where to change the resolution, what should I do?? anyone had this same issue and unable to change the resolution in head unit? please help!!

[@eazidiy]

Different headunit, different location where it is placed. Check your factory settings. Something relating to Reserve Camera or Video settings

[@jamesh6922]

@@eazidiy I have looked again several times no where to be found, dvd plays ok, but not the backup camera

[@eazidiy]

@jamesh6922 follow me on Instagram @eaziteks. Send me some pictures or videos for me to see

[@anthonyrojas5305]

idk why but i can’t find the reverse settings on mine

[@eazidiy]

Look under Factory settings

[@Bluemoonrealtygroup0617]

My android radio does not have a factory radio setting.

[@eazidiy]

Please check, the settings could be under video and displays

[@jimbrow83]

My camera worked and then stopped and said reverse signal lost but then worked again idk wtf is wrong

[@eazidiy]

Connection getting disconnected. Check the wiring connections in the trunk to the reverse light

[@user-jo8kw7in1j]

What if the picture does not pop up when you reverse

[@eazidiy]

Possible that the connections is not done properly. Check the wires contacts especially the one between reverse cam and reverse light.

[@Radius..]

Did all my resolutions and still didn’t work, the camera is brand new

[@eazidiy]

Questions are: 1. Is the connection done correctly? 2. Do you know the resolution of your camera? And that resolution available on your Android radio?

[@SumProject18]

Mine has weird static lines almost like cable TV

[@eazidiy]

Did you make the changes?

[@Blackelite88]

This method Doesn’t work always. When you start the car it will do the same in some cases. It works for me as well in idle mode but once i start the car, it scrambles. You need a pwm filter for it. Just wanted to share this info in case of.. but thnx

[@eazidiy]

Hi, this method works 100%. You must know your radio and Backup camera display resolutions. Simply match them.

[@Blackelite88]

Unfortunately not bro im sorry. changing the screen output resolution for the camera doesn’t work for some cameras. You still need a straight 12v doe your rear light etc. But never mind. I received the filter today and after installation it worked😊

[@eazidiy]

Maybe that what you radio need. Great to know it worked for you. Cheers

[@rambo.7382]

Mine is the exact same but doesn't work i tried all the modes

[@eazidiy]

Do you have a Distorted display or no signal? What is the resolution of your camera?

[@eazidiy]

Follow me on Instagram and share pictures or video with me. @eaziteks

[@user-eg7hj7fd6o]

Mine doesnt have reverse system selection wtf

[@eazidiy]

For some radio it could be under video settings.

[@nickswofford2214]

No luck finding the reverse settings

[@eazidiy]

Sorry to hear that. Does your radio have a manual?

[@terialyelverton9843]

I don’t have reserve on mines

[@eazidiy]

Look for setting that is related to camera

[@terialyelverton9843]

@@eazidiy I tried they didn’t have nothing

[@eazidiy]

Is your radio an Android headunit or Double din?

[@terialyelverton9843]

@@eazidiy android t5

[@eazidiy]

Goto your factory settings, then Backcar settings. There should be a 6158C_Vin3_Rear. Should that and make adjustment

[@alexhodson8831]

I can't find camera menu(((

[@eazidiy]

Check the factory settings. For some radio, it will be under video settings.

[@alexhodson8831]

@@eazidiy found it, thank you

[@eazidiy]

@alexhodson8831 you are welcome. Are you able to fix it now?

[@delmicherssen]

Shaky video. Helpful but shaky.

[@eazidiy]

Thanks for the feedback, I am glad you found the information useful

[@SyndykatAirsoft]

Android factory password

[@eazidiy]

Check your radio manual for it