How to fix the QCY T6 Charging problem

[@iwcok]

You saved my money for a new pair of headphones! Thank you!

[@ibrahim.abouelseoud]

Thank you a lot! Mine were still under warranty as they were only like 2 months old but the seller didn't want to honor them, so I just followed your video and took matters into my own hands with my trusty solder iron and it works like a dream !

[@zidstarz]

Already did this with my dad and it works! Thanks for making this video :D

[@juanpedrorodriguez5164]

Fantastic, simple tip worked for me. Thanks a lot

[@carlobernards]

Amazing. This really works!

[@leavoa]

I've been helped by people on KZbin so many times before, it is really satisfying to be able to return the favor!

[@darmajayasugisna9901]

hai, having same problem with left one just wonder, maybe the same case I'll try your methods thanks for the information ! good video

[@manmeetjot9579]

Brother, try cleaning charging points of both earphones those 2 little dots dirt collects on them use Q tips and some isopropyl alcohol or kerosene. I had same issue

[@alperenm6642]

It worked for me. Thx.

[@alperenm6642]

The other side also started to have the same problem and this method solved that too

[@ferhatsan2744]

hello, i want to buy those eraphones but ihate silicons in ear. i like the ergonomy on those erphones. so do you think if i do a "clean cut" (if i menage it) on silicon side. and use a regular sponge covers for the cosmetic look. how effects the sound quality? good or bad?

[@zidstarz]

So what Ingredients do you need to fix it? My English is bad, so all I know is you're using a flux, then apply it to the hole, and you use your solder to the hole while your left hand holding something. What item do you hold on your left hand? And do your earphone still working? Looking forward to your reply!

[@leavoa]

Hi, the tool is called a "soldering iron" and can be purchased usually in any hardware store (you'll need a small one for this job) If you do not already own one, you could take your earphones to the local phone-repair shop and show them the video. And yes, the earphone still work great, I use them everyday.

[@zidstarz]

@@leavoa already did it with my dad after I post that comment and it works! Thanks for making this video and replying my comment, I hope it will help soneone else :D

[@simone.aguiar_mtb]

Parabéns!!! resolvido !!!

[@reubens1014]

Can i do it with no flux? And is your earphone still working?

[@leavoa]

You can, but it's amazing how much better it works with, I highly suggest you invest a few dollars in some flux. Still working and I use it every day.

[@reubens1014]

Thats is great news for me

[@ibrahim.abouelseoud]

Some soldiering wires already have flux inside so could be worth a shot.

[@everaldofernandeztub]

Is shortcircuited the two connecting dots on the earbud with a parper clip, it then started to charge as it should.

[@leavoa]

Weird....

[@critik_6985]

Yo this worked on mine too thanks G

[@mkymnzns]

The pods won't contact properly to the case. Like it would turn on in my bag. Are the contact points the problem?

[@leavoa]

Yup, they autoconnect to bluetooth when they disconnect from the case. I am also going to add a strip of foam to the top of the case to help it compress the buds into the contact better. Overall, I would not recommend these, but if you have them it's definitely salvageable. I enjoy them daily and have minimal issues overall.

[@mkymnzns]

@@leavoa dang. wish I would've known before I bought. the t2c is awesome and I use it for my everyday travels so I figured it'd be the same for the t6. I'll try adding a solder later this day. I don't have a flux, would that be alright or would I damage anything?

[@leavoa]

@@mkymnzns Yeah the case gets a 2/5 from me, but otherwise the headphones are enjoyable and don't fall off, so they are worth fixing if you have them already, in my opinion.

[@andreslizardo938]

I’ve bought them about two months ago. The left one is driving me crazy! it never fully charges, even when it is resting in the case 24/7

[@leavoa]

Could very well be a loose connection. The suggestion in the video could work. If you try it, let me know if it helped!

[@rezabadizadegan3062]

Hi I have a similar problem. when I put right earphone in the case the light turns on for a moment and then turns off. Do you think the problem is for the battery or the connection?

[@leavoa]

Probably the connection. I suggest you try this fix, it won't hurt.

[@rezabadizadegan3062]

@@leavoa I checked case voltage. Right side didn't have any voltage. how can I open charging case and check contention?

[@leavoa]

@@rezabadizadegan3062 good thinking! You can use a very thin metal strip to try and open the case (you can see the seem around the edge) there are about 5 catches/latches to release. Work carefully and slowly and you should get it done without any marks. Use more than one tool in order to hold it slightly open while working on another section.

[@leavoa]

@@rezabadizadegan3062 take pictures and post a video to help others, if you can.

[@ausanoj]

@@leavoa yes its needful, whoever do it much appreciated.

[@ahmedsharaf9067]

My right earphone couldn't powered on....... Can anyone tell my the solution plz🙏🏻🙏🏻.... It has no light at all

[@leavoa]

Will it start charging if you push it in to the case and hold it? (Make sure the case is charged when you try this)

[@heliofeitosa8495]

@@leavoa this tip worked perfectly with me. thank you very much friend

[@robindegroot7944]

@@leavoa I’m trying this now as well with same problem. Case is fully charged (I think) blue dot on/off, but only left ear showed red light. After long pressing right earplug and having it pressed in the case in a certain way finally red dot burned first for a sec so I held it but then after a while when I let it go it still burned red so fingers crossed this works and I can use the headphones again and hopefully charge again the next time without issues.

[@nizrael-pianocovers977]

When did this issue started? Planning to buy one but im not sure about the durability.

[@leavoa]

Came out of the box with this issue (putting in case did not charge right earbud), but after this fix it's been working great for a few months now. Pretty happy with them.

[@ibrahim.abouelseoud]

Mine had this issue after trying it like 4 times in less than a month, but this seemed to fix the issue.

[@nizrael-pianocovers977]

@@ibrahim.abouelseoud yeah , i have this headset now and have the same problem as well but its now fixed using this method. Its now going 9 months old now and it works like a charm.

[@ibrahim.abouelseoud]

@@nizrael-pianocovers977 thanks for the update, do you use it for exercising as well? I'm curious if the solder doesn't corrode due to sweat.

[@nizrael-pianocovers977]

@@ibrahim.abouelseoud yeah i use it for exercising and it doesnt corrode the solder its been 7 momths since i did the soldering on this and its still charging with no cut connections or somethin.

[@simone.aguiar_mtb]

dei dois pingos igual ao vídeo. vOLTARAm a carregar, valeu pela dica

[@leavoa]

tão feliz que isso ajudou você! aproveite os fones de ouvido!

[@mixalisgremisliadis6639]

mine won't power on nor will they charge and idk what to do i was using them very carefully. What can i do to fix this. My charging case doesn't power on that led light anymore when i charge it .

[@leavoa]

Sounds like the problem is with the case. Either ask for a return or dive into the case and try to repair it.

[@eggressive_]

Is it paper clip?

[@leavoa]

No, it is "electronics solder", can be purchased in any hardware store, usually. If you have no experience and no tools, I think it will be easier to go to the nearest phone repair shop, show them this video and ask them to do it.

[@martinpadilla3115]

And what if the one who doesn't want to charge is the case, not the hearing aid?

[@leavoa]

Never had this issue. I would start by trying different cables. If that doesn't fix it you can either return it to the manufacturer, or look inside and see if you can find the issue. It's pretty easy to pop open, but you do run the risk of leaving a mark when you pry open the case.

[@martinpadilla3115]

@@leavoa idc about the marks,I think the trouble is the charging center and I was looking for a way to pop it out but I couldn't do it for fear of breaking the case

[@leavoa]

@@martinpadilla3115 go slow around the edges with a knife to create the initial gap and plastic ruler or something similar to pry it open. Use the flexibility of the case itself to help the catches opening. It's pretty robust, go slow and you'll be ok.

[@martinpadilla3115]

@@leavoa thanks man, I found a cable that works ok, but it also has the same problem that you are fixing in the video

[@OsamaEG]

the problem I have that the Right pair when I touch it to try to connect to the phone it doesn't make the sound of pairing and doesn't pair while sometimes with absolute luck it works b it like 1 / 1000 chance

[@leavoa]

Hi Osama, Does it charge correctly in the charger? Does the red light come on? (or red and then solid green to show that it is full). If it isn't charging, it may not be able to connect.

[@idojac6738]

היי אחי אני תוהה אם אתה קרוב לאיזור חיפה? יש לך המלצה איפה אני יכול לתקן את זה? תודה

[@leavoa]

כל מעבדת תיקון טלפונים יכולה לבצע את זה בחמש דקות

[@vibovistan8965]

I hate this buds just a little sweat and they go crazy

[@ManojKeswani91]

I'm going to buy a new one