How to fix this error E010 E020 E030 E552 e studio /256/257/305/306/455/456/457 in தமிழ் (pat 02)

Рет қаралды 4,125

Күн бұрын

நீங்கள் Photo copy machine வைத்துள்ளீர்களா அப்படி என்றால் இதனை முழுமையாக பாருங்கள்
Code: E010
Description:
Jam not reaching the exit sensor: The paper which has passed through the fuser unit does not reach the exit sensor.
Causes:
Exit sensor LGC board Registration roller clutch Registration roller
Remedy:
1 Open the Automatic duplexing unit. Is there any paper on the transport path? Yes Remove the paper. No 2 2 Is the exit sensor working? (Perform the input check in the test mode: 03- [FAX]ON/[9]/[B]) Yes 3 No • Check if the connector of the exit sensor is disconnected. • Check if the connector CN309 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the exit sensor • Replace the LGC board 3 Is the registration roller clutch working? (Perform the output check in the test mode: 03-108/ 158) Yes 4 No • Check if the connector of the registration roller clutch is disconnected. • Check if the connector CN315 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the registration roller clutch. • Replace the LGC board. 4 Registration roller • Check the registration roller. Replace it if it is worn out.
Code: E020
Description:
Stop jam at the exit sensor: The trailing edge of the paper does not pass the exit sensor after its leading edge has reached this sensor.
Causes:
Exit sensor LGC board Registration roller clutch Registration roller
Remedy:
1 Open the Automatic duplexing unit. Is there any paper on the transport path? Yes Remove the paper. No 2 2 Is the exit sensor working? (Perform the input check in the test mode: 03- [FAX]ON/[9]/[B]) Yes 3 No • Check if the connector of the exit sensor is disconnected. • Check if the connector CN309 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the exit sensor • Replace the LGC board 3 Is the registration roller clutch working? (Perform the output check in the test mode: 03-108/ 158) Yes 4 No • Check if the connector of the registration roller clutch is disconnected. • Check if the connector CN315 on the LGC board is disconnected. • Check if the connector pins are disconnected and the harnesses are open circuited. • Check if the conductor pattern on the LGC board is short circuited or open circuited. • Replace the registration roller clutch. • Replace the LGC board. 4 Registration roller • Check the registration roller. Replace it if it is worn out.
• How to fix this error ...
pat 01
முழுமையான தீர்வு Toshiba e studio bypass tray Lock
Toshiba e studio /256/257/305/306/455/456/457
Photocopy machine repair
Richo MP C
Toshiba e Studio
Sharp AR-M
Hp
நீங்கள் எந்த நேரத்தில் வேண்டுமானாலும் இந்த வாட்ஸ் அப் இலக்கத்துக்கு என்னை தொடர்பு கொள்ளலாம்.
ඔබට මෙම whatsapp අංකයෙන් ඕනෑම වේලාවක මා සම්බන්ධ කර ගත හැක.
このwhatsapp番号でいつでも私に連絡できます.
يمكنك الاتصال بي في أي وقت على رقم whatsapp هذا.
#mohamed fiyas #fiyas# #fiyas #@MOHAMED FIYA #Akkaraipattu# #Akkaraipatu