How to fix Toyota Power window Master switch

[@stevencoltrane88]

Excellent video. Great explanation and labeled pictures- I had this EXACT problem. I was going to replace the switch also but I was shocked at how much they cost, and I'm afraid a used one will just have the same problem- it appears to be very common with this generation Highlander. I have to wonder how much the actual circuitry differs from the Highlander to say, a Camry- which doesn't have the inclined board/water accumulation problem. The switches themselves look identical and I know the Camry, Sienna, Rav-4, Corolla, Matrix, and Tacoma use the same switch- it's hard to imagine the Highlander one is actually any different- but maybe it is. Anyway- I'd rather fix it the one I have anyway.

[@clusa3721]

Many thanks for your video. Thanks to you we can learn to fix and feel more satisfied with a fixing and the savings involved than just purchasing a new part and continue being uneducated about why the button stopped working. Thank you again.

[@danmamo5849]

People like you make education so interesting and fun. Thank you.

[@gwinvan22]

Appreciate the work and editing that goes into the video. You do not have to have the same car but it's good to know how automakers' electronic modules can fail and how to fix them.

[@syedsayeedurrahmanzaini4221]

Thanks for uploading this useful video. I will try it on my car.

[@7sko]

Thanks for your kindly feedback

[@con5124]

would have helped to have seen the solder, not sure where you did it

[@PASKIMOS]

Thank you for this educational videos.

[@mindinew]

Bro - I face the same problem on my Cruze. Sadly I was convinced the issue is on the passenger switch. Thanks so much… by the way are you Ethiopian? Your accent resembles like my Ethiopians 😊

[@abelayele8643]

Thank you for sharing. Great help

[@brucelaing2709]

Awesome video Man very helpful 👍

[@williamtse6238]

Great video 👍

[@martymeyer4125]

Great video, thanks for the help!

[@ammaralyasiri4191]

please can you explain where the relay and fuse control the window and lock center plz make video

[@lubo2erddie]

Hello, mine has illuminating circute lights that doesnt go off even when the car is completely switched, electricians have had a look at but they have refused to go off.. and it draining my battery like crazy, whag can i do?

[@michaelprivano2321]

positve wire located to the sucket terminal

[@F350-k8r]

Good info thank you

[@sawmansin3533]

Hi Sir, why my driver window switch is no working with switch LED is blinking? The rest all are working.

[@asmattareen6102]

How did you find that there is no connectivity between two points?

[@ktdiy9818]

Use a continuity tester on a multimeter. lot of multimeters these days have audible sound to test continuity. You can also google "How to test continuity"

[@rmyrie5963]

Masterfully Done

[@branimirmarkohrgovic6602]

Great video, thank you :)))

[@TROllingNINJA2031]

Having the same problem but with Toyota's stupidly expensive sister company Lexus. They want $840 for a new unit!

[@JenniferBristol]

You can find a less expensive part online, and install it yourself.

[@viktorvik1973]

nice!

[@fajariqbal4573]

Mine is broken just like yours, may I know what's broken?

[@ktdiy9818]

Hi Fajar. It can be like mine or it can be different problem, like corroded and broken circuit line or faulty component.... You have to take it apart and check continuity. Thanks for your comment.

[@fajariqbal4573]

@@ktdiy9818 Okay I'll check it out, thank you

[@MarkSWest]

You could have simply used a hot soldering iron and reflowed the solder (inside the pass-thru hole) instead of all that wiring or whatever it was that you used.

[@tinydragonlabs]

The wire was to test it. If you had simply watched until the end, he did solder it after the test was successful.

[@MarkSWest]

@@tinydragonlabs I did watch to the end. I've been repairing electronics for over 60 years. I've fabricated integrated circuits with Intel Corp and IBM and others for over 30. This video is okay if you've never dealt with this type of repair I guess, not sure why even clicked on it.

[@mctwain5319]

Next time adjust the decibel level!