How to fix Your Broken Rear Latch On Your 1st gen 2001-2007 Toyota Sequoia

[@saulgarcia3255]

So far the best Sequoia latch I've seen

[@pennyholland6654]

Where so I get this latch?

[@foxracn85]

I installed your latch today. Took me 15 minutes and is the best mod. No better feeling when things work the way they should. Thank you for making these available.

[@joevisueth]

I did mine but only last me 2 weeks got stuck again so I’m gonna do this trick to stop the problem. Obviously nursing better do it the rigth way but unfortunately can’t

[@TBR996]

wheres the latch link at?

[@electropentatonic]

I'm on my 3rd OEM handle and recently I've started to have put my shoulder into the door to open it. My wife is going to be super stoked on this. Thank you 🙏

[@wasatchmotoco]

Glad it was helpful for you. If you can’t get your hands on one, message me on Instagram and i can get you one 👍🏽

[@ScottMorrison-g7x]

Bought a 2006 Sequoia for a good back up car recently. 1 month of ownership and the rear hatch wouldn't open. Couldn't get the part from your link, but made my own lever from an old bracket of sorts...took less time than I had thought it would. Works great!!

[@tparr01]

That is an AWESOME Fix! I have had to take that back panel off about once a year to repair that stupid tailgate lock. I am adding this today!

[@angelamoore4458]

Hi! Where did you find the link to order? I don’t see a link on any of his pages

[@tparr01]

@@angelamoore4458 I bought a short piece of aluminum bar stock at home depot. Cut it, bent it and painted it black. I have been using it for the last 3 months and it works perfectly.

[@aarongreen6878]

@@angelamoore4458me either

[@LH-kz2nf]

I did something that works the same on my 06 but yours looks very professional and 110% better than mine. I used a small diameter 8" piece of stainless steel wire that has a washer on the end of it. So now it has a tail lol. I grab the tail and pull slightly to the left and it opens right up. When I have the time I think I'll try your upgrade. Great video thanks a lot!

[@PreparedPatriotNC]

Are you still making these? There is no link to go to.

[@hectorl4693]

@bellinghamfpvcan you put the link below I couldn’t find it either

[@edsadventures7012]

I don't see a link either...

[@MrSkinnyn71]

Dang it. Still no link

[@torrez2000]

Man, we need this link so bad lol!

[@SloppyJoe671]

Google aireddown_adventures

[@rachaebby]

Dude thank you SO MUCH! I've had my Sequoia rear hatch apart so many times. I followed your video today while installing a P clamp for the new latch. You're a life saver thank you!

[@rexradar9297]

Nice mod. I also got rid of the inner and outer dust boots. I added 4 peices of of gorilla tape around the outer latch to keep out the majority of dust from dirt and gravel roads. I also rebuilt the latch mechanism as the inner rubberized coating was comming off binding the latch. This binding was so bad it bent the metal upgrade handle I had installed! During this process I replaced the latch pins with bolts. This allows a failsafe now of using a wrench when the cable doesn't work. Usually a sign to lube it up a bit. Finally I also replaced the cable and Noe it ends with a ball grip. No more latch. Works great. But this solution is nice too. Also recommend having the second opener inside the door.

[@MarshallBLewis]

Do you have a video of the latch rebuild?

[@tn2378]

In case someone is trapped in the trunk 😜

[@mr.whitefamilyhomestead4503]

Just got mine, ordered it like 3 days ago. Install it in less than an hour and it's amazing

[@ashleywoode2632]

Where did you order?

[@marcusd25]

Where? Can you comment with a link?

[@mr.whitefamilyhomestead4503]

@ashleywoode2632 I keep trying to posy a link but fishy things are happening just Google Aired down adventures he has a shopify account

[@mr.whitefamilyhomestead4503]

@marcusd25 I keep trying to posy a link but fishy things are happening just Google Aired down adventures he has a shopify account

[@Digthepast252]

Yeah what's the part?​@@marcusd25

[@MrTonyman4575]

I used this idea. But used an angle brace for wood. Works great

[@intheNarmynow]

thank you for the idea! I noticed the link to the latch was missing and was wondering what to look for to use!

[@mikevivilacqua8868]

Thanks for sharing. I won’t be buying another latch handle ever again. Made mine out of a scrap piece of aluminum… covered it with a tight fitting vacuum cap. Didn’t bother with the cable on the inside as I didn’t need it. Again, thanks!

[@samhampton9139]

Is this from Airdown Adventures?

[@jordanmercier3616]

I've replaced my latch 3 times in 4 years lol, this is gunna be on my to do list for sure.

[@raylewis238]

Amazing. I've replaced the back latch multiple times on my sequoia. Right now, I have the cable accessible on the outside of the door but it can be a pain to open. This bypass lever is a game changer.

[@rafaelsalinas9363]

Hello I just wanted ask you Where did you get that little piece , that is a great idea and I want to try too Thank you

[@rubymartinez1125]

That's freaking awesome. I'm gonna go fix my latch That's been broken almost a year. I had a few guys look and try to fix it but they couldn't or just lazy. But you just make my day, I'm fixin to go fix and get redneck on my 2003 Toyota. I'm a little bit redneck to and you saved me a shit load of money. THANK You. You're the bomb. Thanks from TEXAS.

[@frostbite_hemi3922]

I removed the cable all together. It’s not necessary to keep it, so I ditched it. I also kept all of my black housing/trim prices and I just used garden shears to cut away at some of the material to give clearance for the new lever.

[@wasatchmotoco]

Nice! Thanks for sharing! I just kept the cable to easily open it from the inside.

[@frostbite_hemi3922]

@@wasatchmotoco I see! That makes sense for your rig and needs 👌🏾

[@wasatchmotoco]

Yea it works awesome!!

[@stephenavila5027]

@frostbite_hemi392 What about when opening from the inside?

[@frostbite_hemi3922]

@@stephenavila5027 I currently do not have any way of opening the rear hatch from the inside. For my application, If I needed to exit while inside, I could always crawl out through the glass when I roll it down or use the rear door

[@JoshDempler]

Been using for 6+ months still works great.

[@wasatchmotoco]

Same here!!

[@Digthepast252]

​@@wasatchmotocowhat do we order or get from the parts store?

[@jeffcooper3847]

Where did you get that bracket and did you have to get a longer cable to make it work? Also would like to see your new video on putting all the plastic back on and having another handle for the inside. Thanks

[@levipior5385]

The man, thank you, been battling this for years.

[@ABNXJ]

Oh dear lord! That rear hatch has been a pain in my ass ever since I’ve owned my sequoia! Coming up on the 8th, yes, 8th time replacing the handle/cable. Definitely gonna get one of these!!

[@GSK4EVER]

Got mine installed and it’s great. Thank you. My only concern is that for me and my off-roading, DUST is the real culprit. It causes the latch to cease. I loaded it up with super lube and taped it up to help keep dust out. I don’t have my original cover but I’m going to try to 3d print a custom one that has a slot for lever.

[@tndeere2]

That’s awesome!! Wish I had seen this yesterday after I spent 2 hours fixing mine for the third time

[@JujuBebop]

I want this!!! My hatch is stuck for the third time. I'm tired of replacing these parts. I also love the ability to open from inside. Can you provide a link?

[@wasatchmotoco]

There is not an actual link, but just go on Instagram and search for aireddown_adventures and send him a message. He will respond pretty quick I’m sure.

[@wasatchmotoco]

Also make sure and hit the subscribe button for more helpful sequoia videos! Cheers

[@arthurbongiorno9715]

Does it lock??

[@yengxiong8892]

Hello, What's the link to the latch? It's not in the description anymore. :(

[@pineyken1251]

Aireddown adventures

[@jamescarley4207]

so where did you get that handle piece?

[@pineyken1251]

Aireddown adventures

[@TheMotorPsych]

@@pineyken1251 Thank you; that helps

[@carlosgallegos8244]

Nice video, but i have a question, how i remove the plastic from the lock if the door is closed ?

[@JordanTC1120]

So I just installed this lever that I bought from you several months ago. It works well, the issue I’m having is that the lever doesn’t spring back to it’s original position after opening the door. It just keeps the latch in the open position. If I slide it back to the locking position, the latch comes back and shuts as it normally would. Any ideas on what I could’ve done wrong in the installation?

[@Tom-pb9ef]

great suggestion. I've been through two oem door latches now on my 04

[@pineyken1251]

Hey I just replace the latch with the mod you have but when I go to lock it it. The actuator lock will not lock the door but the rest of doors lock. You think my actuator went out right there and then I mean looks pretty old but did work before any advice would cool and thank you showing us this mod I don’t have to worry about that breaking on me anymore

[@MinsanSauers]

I just installed it on my 2007 last weekend. Works great and easy to install!

[@gpatterson84]

I added a fabricated latch like you have detailed. Thank you. I left the cable off of the new/replacement latch above the license plate, as the lower latch is more convenient. Now, my security alarm and the lock doesn't work on the rear hatch. The front and passenger doors lock and unlock, but for some reason the rear hatch doesn't lock. I've re-attached both wiring harnesses on the latch mechanism, where the new handle is located at the bottom of the rear hatch. Do you have any suggestions on how to get this to work again? Thanks in advance for your expertise. Gary Patterson Allen, Texas

[@limitlessmamathings5472]

Great video ! Going to try it but my issue also is that the wi Dow goes down with the internal Switch but won’t go down with the key Everything was replaced a few months ago, not sure what it could be ! Latch seems to be stuck when I try to pull it open I feel a lot of resistance 😮

[@kenmcf]

You said the cover was not needed but I think it's to keep dust and grime off the moving latch parts. Those get dirty then they start to bind and stick.

[@RiseAboveElevation]

awsome mod! My latch just broke today! Can you tell me what the length of that is when flatten stright? Thanks

[@sterlingchristy2107]

So what i did for my door hatch i use a zip tie and keychang with a handle to open my door and it worked.

[@captainamericaamerica8090]

Saved all this massive work

[@stephenavila5027]

To open from the inside?

[@sterlingchristy2107]

@@stephenavila5027 where the third door latches onto the bumper when you open it if you look inside there is a gold brass clamp I hook my keychain inside there. I used a zip tie was the keychain strap ever since then I have never had a problem.

[@garciasschevy]

Where did you order the part you added and how much did it cost?

[@thebadtouch9460]

I been watching your video. Door won't open. I just got the door open...And the black box with the actuator...BUT...i have a wire going from the actuator down to the bottom door latch? I have not see that anywhere online. Have u seen that before...A small wire going down to the latch

[@samhampton9139]

Wheres the link to the part? I need this! Had heavy freezing and the dang latch broke for the second time!

[@mr.montoya]

Where did you get that latch? The link does not work.

[@elijahott8103]

I installed mine, but I have no space between the lift gate and rear bumper and it was getting bent every time I opened it. So I had to take it off and go back to factory. Wondering if I’m going to to have to cut into the rear bumper trim to make it work

[@atrainwr3k]

Hey! Is this not available anymore? There’s no link in the description to purchase it

[@adventuretrails1ato]

The manual latch is here now! I will be getting this sooner than later!

[@colinerdle]

Would like to purchase this latch, also have you made the follow up video?

[@Hanky_Bannist8r]

Any word on wether you'll be making these again ? I followed the marketplace link and it says out of stock. Id love to fix my tailgate handle.

[@tn2378]

I did it last week. It’s amazing.

[@scottstein2492]

This is awesome! Can I get this part or do I have to make it?

[@kenmcf]

Will this still work of the tailgate latch is broken or acting up? The cable goes from the tail gate latch(the rectangle one) down to this bottom latch right?

[@joseltrtorresrico2801]

Where do you get the leverage .Or what did you use to make one

[@Ice1000-m4x]

Great work..how can I order this part?

[@danewart599]

Did you buy yours off of Zach Gleason too? That’s where I bought mine- what a great idea, great product and he contacted me later on to see how things worked out for me! Thanks Zach!

[@CreativeLivingChannel]

Where did you buy the Zach Gleason bypass latch??

[@AdkinsKDC3D]

Where's the link to the custom bypass latch??

[@nickbohman2997]

Hey I’d like to buy one of these but the link is missing. Where can I buy one?

[@mikescott7408]

Great fix. Best video about this problem and very understandable. awesome.. was about to insta;ll 3rd handlem i did what you did, any idea why i can unlock the hatch when truck is locked.. ? i re watched video and did not see anything about cutting a wire or anything ,? thanks from Calif

[@josiahsmith8983]

Where did you buy that peice at I need to do this

[@allen2389]

Will the trunk still lock after? I installed but when cars locked i can still open the trunk

[@josepena354]

The issue is the tension on the cable. Because of this people break the handle. All you have to do is adjust by bending outward at the lock, where the cable sits, this gives more tension on the cable and it's easy to open lift back again.

[@adrianmejia4997]

I did exactly what you said but I removed the latch clean and grease install new handle adjust cable and magic works like new

[@robertroberts7166]

I am taking the wire off completely. I just bought the latch. Thanks.🙃

[@shaynestone7757]

Working great brother! Should have you film my modular, folding bed that allows for all 3 rows I'm nearing completion. Have it up on the wasatch sequoia page minus a video.

[@assertive415]

boss the link is missing to purchase the latch?

[@holeshothunter5544]

I just bought a lever from you. I hope it works on my Sienna...

[@Alex-ss4bk]

I think I missed something, why are you including the cable with the install of the bypass? So that you can open from the inside? I am thinknig about getting this but I prefer not to install the cable

[@natevanlandingham1945]

Just leave the cable off then.

[@palmerkim9270]

I assembled it amd it worked perfectly. Until the 3rd time I opened it. Disassembled the inside portion to see that the cable came off. Apparently, the plastic portion on the cable snapped. So the ball end of the cable won’t stay on for long because the plastic groove won’t stay on. Any thoughts on how to fix this?

[@robertgates8800]

Hi there. Where do I buy that lever part. .? Thanks !!!

[@2papisan5hez]

This is the video I’ve been looking for, omg!!! lol now how do you open it if the latch is broken? So that I could make this new latch lol

[@josephthielman6683]

I am have problem with my latch. Went I saw your video Where did you buy latch from ?

[@wasatchmotoco]

facebook.com/marketplace/item/1846272432371435/ Here you go 👍🏽

[@rhinostujlub7735]

Thanks for showing how to fix this problem on sequoia. Where and how can I buy one bypass latch opener from.

[@wasatchmotoco]

facebook.com/marketplace/item/557724866355002/ Here you go

[@syreeka7418]

What the name of this part you used and where I order it

[@romangray9792]

Hey Wasatch, trying to follow the link for this tool but it's not available/working. Do you have another link for this?

[@shouayang7284]

I made my own with the help of this video but I’m curious why when I locked my car pushing the lever it still be able to open? So my back door will not lock at all do you guys have any idea?

[@wasatchmotoco]

Your locking mechanism isn’t working. Could be jammed or just bad. Mine went bad before it is relatively easy to replace it with a new one.

[@shouayang7284]

@@wasatchmotoco I’ve tested it before putting it together and it was perfect. But when I installed and I tested it and it won’t lock so without anyone knowing then I’m ok but once they touch the lever it’ll open

[@jordanmercier3616]

@@shouayang7284 if you havent tried yet, go back in and make sure all you're connections are clipped together properly.

[@anyajessop7358]

The link to the handle isn’t working. Is it expired? If so how can I still order through you so it benefits

[@petegholz690]

Is there a link. I saw it one time and then cant find again

[@StephenAde-ow5gh]

Now, only if I could open my doors. The latest thing to fail is the ignition tumbler 😂😂😂

[@jerricaeffertz3503]

I am Interested in getting this latch. Can you send me a link?

[@jhardFF134]

Maybe I missed this part but PLEASE tell me what you used for the actual “new handle” ???

[@max7143]

There isn’t a new handle, the tab that he installs replaces the way you would normally open the hatch.

[@zachgivarz9898]

Mine is broken in the closed position…my only complaint for this beast of a car. Any idea on how to fix?

[@wasatchmotoco]

I’d your plastic cover piece is missing you can use a piece of bent metal like in my other video and open it. Or I’ve heard you can take the license plate off and make a hole but I think that’s kind of ghetto. The only other option is to crawl inside and remove the cover. It’s a bit tricky but doable. I had to do that on my first go around. Hope this helps! Make sure and subscribe to our channel for more helpful sequoia ideas :) cheers

[@paulc6317]

Remove the rear window weather strip, slide a sturdy ruler in to pop out the cable, pull cable to open.

[@morgangriffith6226]

@@wasatchmotoco I've replaced my latch numerous times and I finally reinforced a bent bracket with a welded reinforcement. My new problem is the actuator has failed with the liftgate locked closed. I've pulled the paneling and pulling on the actuator cable does nothing. If I understand your previous comment correctly, were you able to get into the liftgate and pull the plastic housing around the actuator from inside the door? If I can get the door open I can swap the actuator easily enough, I just can't figure out how to get it open from inside the truck. I'm also in SLC, UT, I will keep an eye out for your Sequoia around the valley. Thanks!

[@wasatchmotoco]

@@morgangriffith6226 sorry to hear about your tailgate. That’s a tough one. I removed the plastic after it was open but I’m sure one could pop it off with it closed with a certain tool..

[@not1au]

Can you do it without adding the lever inside below the window? You make it look easy.

[@miltonslade2896]

Where do you get the latch?

[@golfmike304]

I can’t find where you bought your lever for the hatch hack. If you could help me out I would be so grateful. Love your videos.

[@wasatchmotoco]

Message me on Instagram and I’ll get you more details. Wasatch Moto overland

[@golfmike304]

@@wasatchmotoco I made my own and you saved my rear hatch. I was getting to the point I was going to have to cut it to get my hatch open. Your tip on the piece of steel Rod to open it absolutely saved me. Thanks for your videos my man. Now I will be ready for my overlanding trip first of November to land between the lakes Kentucky.

[@wasatchmotoco]

@@golfmike304 dude! I love lbl, we went like 6 years ago when I had a jeep. It was a lot of fun. I’d love to go back with the sequoia!

[@monicabradley7276]

Is the LATCH piece no longer available . The link says SORRY

[@fathifaiz]

i repaired it like in the video but the door stay unlock when i shut it open without key or center lock means door can not close

[@skatenbikee707]

So if I did this could I also leave the stock latch connected so if it breaks again I have a backup I have no need to open from the inside

[@wasatchmotoco]

Yes you can.

[@natevanlandingham1945]

Seems like this style of latch hack came out in the last few years ago. Quite a few years ago when I went through my first handle problems this wasn't out the . I have replaced the handle with the OE Toyota handle and done the lead sinker truck to take up slack on the cable. It slipped off and I am back in there tonight and watched videos to make sure I found the process to take the back off again since I haven't been in there in 4-5 years maybe. Could use a new cable but just put the lead sinker back and taped it back so it can't slip out of place again. We're good to go but if something fails again I'll probably do this style repair. Oh taped the rear window motor and gave it the fix again while in there .

[@desidrian]

Did you make the vid of the inner one?

[@wasatchmotoco]

Yes it’s in with my other videos

[@bretthenderson2847]

hi gang... trying to order your latch... however I don't see the link that is supposed to be above. was it removed or am I mentally challenged?

[@fernandoban5050]

where can i purchase this?

[@harlanpooley2907]

That plastic cover is for dust. When it gets dust in there and it makes it hard to open, which leads to the handle breaking. I sealed mine up every more to help so I wouldn't have to replace the broken handle again.

[@jesseorozco5243]

I went to 3 hardware stores. No one has a clue of what that piece of metal is. What is it n where do we get one?

[@davidgates4344]

This is a cheap and easy fix for the hatch but I went with the York Solution Supply electric hatch conversion with the second accessory button for the interior. It is EXACTLY how the Sequoia should’ve come from the factory. We’ll worth the money.

[@davidgates4344]

None of those issues so far, knock on wood. The only downside that I’ve noticed so far is the button location is sometimes difficult to find and there is no spring assist so if you pop the hatch, you’d better have your other hand pulling on the bottom to release it from the latch. Once you get the hang of it, it’s no problem. I can’t imagine ever having to go back to the old latch system.

[@playmeacountrysong]

Good luck. Mine stopped working at the one year mark. :(

[@kurtnagahori9709]

I just ordered one via FB. Super stoked about this, can’t wait to get it on.

[@wasatchmotoco]

thanks for your support! Cheers

[@Maxumized]

Can I still order this modification?

[@redeyedturtle32]

Where do I get this latch? 😩

[@1ScottPhoto]

How do I order the Latch? The Link does not show up.

[@pablopenasco4254]

Thank you for sharing this! Time to go fix mine.

[@robertandrews8686]

how do we open the door to fix it if the key fab or the hatch won't work? thank you!!!

[@doesleapfarm]

I had the same problem. Looking from the back, if the lever is installed too far to the right, it prevents the locking mechanism from engaging. You need to loosen the bolt on the lever and make sure it is tightened down so the lever is more toward the left.

[@AlecsMorales]

My latch just broke today without knowing it was broken, Now it's time to fabric me a latch

[@kylerivera3982]

Where can I get this latch