How to fix your Hot Water Temperature Mixing valve

Рет қаралды 88,283

Күн бұрын

Пікірлер: 103

@bella_cello63 8 ай бұрын

Thank you so much!!! Single mom of 2. I was able to follow your instructions and save myself several hundreds of dollars!! I’m so excited to have a hot shower … finally!!! ❤

@DDIY-Guy 8 ай бұрын

That's fantastic! Glad the video helped. Thank you for commenting. It made my day. Have a great rest of the weekend.

@LemonQueen 5 ай бұрын

OMG'osh! Thank you so very much!!! I had a plumber in yesterday that told me it was a $400.00 fix! I was even going to buy parts and try to fix it myself. After seeing your video, and following your simple instructions, I have my hot water back!!!! Thank you Danny!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@Skyscraper2015 Жыл бұрын

Thanks bru. My tempering valve was being funny, the geyser had just been replaced like in the past week and we weren't getting any hot water. So I felt along the pipes and realised hot water was reaching the Tempering valve but only cold water was coming through into our hot taps. So I did what you suggested and it worked. I opened fully to only cold water, and then when I tempered the water again I had hot water. Many thanks. Keep up the good worl

@mikec7812 10 ай бұрын

Just wanted to another be commentator to share my hot water issue was fixed after watching this video. Thank you! Plumber would have charged $195/hr. Buying a new Thermostatic Valve cost $110-$150 depending on USA-made or that other place. I also flushed my hot water tank before messing with the mixing valve. If you don't, the crap from the hot water storage tank will clog up the valve again then you'll have to watch this video and start all over again :)

@DDIY-Guy 10 ай бұрын

glad you were able to get it fixed. thanks for commenting. have a fantastic rest of your week!

@ineedhoez 6 ай бұрын

I bought one. I wish I saw this video first.

@Bbking-b Жыл бұрын

You are the man!! Simple fix but an amazing fix none the less. Just like some of the other comments in here, I recently had my water heater replaced and suddenly we stopped getting hot water. I tried turning the mixing valve but that didn’t work. Turning it so it’s mainly cold water seemed to have clear the funk. You’ e saved me a plumber visit!

@DDIY-Guy Жыл бұрын

glad it worked for you! thanks for commenting. have a fantastic rest of the week!

@mitchellflatt1407 2 жыл бұрын

This video was super helpful. Had our tank replaced recently and after it was done we didn't have any hot water. The guy has said it was a mixer valve issue and this video helped me figure it out until I could get it replaced. Thank you!

@DDIY-Guy 2 жыл бұрын

Glad it helped out. thanks for commenting. have a great rest of the week!

@mysuperintendent9095 Жыл бұрын

For anyone wondering, the "crud" is sediment from the hot water storage tank or hot water heater. The "screen" is an aerator (in case you want to buy a new one).

@honestmarc 2 жыл бұрын

Hey man.. thanks for posting. You saved me big time. I desperately needed a shower. It worked!!

@DDIY-Guy 2 жыл бұрын

Glad to hear it worked for you. Thanks for commenting. Have a great rest of the weekend!

@ineedhoez 6 ай бұрын

OMG!!!! YASSSSSS!!! I was ready to convert back to a gas tank because I couldn't take a simple hot bath. Followed the video and boom! 3rd degree burns! Just how I like it😊😊😊

@DDIY-Guy 6 ай бұрын

love it! glad it worked for you! enjoy you hot baths!

@Wolffman013 2 жыл бұрын

Thank you sir!!! This worked like a charm for me. I had to replace my temp sensor on my water heater and then I was getting low hot water pressure with just warm water. I was just about to call the plumber.....THANK YOU!!!!

@DDIY-Guy 2 жыл бұрын

glad it worked for you! thanks for commenting.

@zaskatun Жыл бұрын

Thank you so much! Fixed my problem within the first 30 seconds of your video! Magician!!!

@DDIY-Guy Жыл бұрын

that’s fantastic! glad to hear it worked for you. thanks for commenting. have a great rest of the week.

@fredericmasse8167 6 ай бұрын

Thanks for this easy tip. Went from 94oF before to 115oF after! Happy wife and teenagers!!!

@DDIY-Guy 6 ай бұрын

that’s fantastic! glad it worked for you. thanks for commenting. have a great rest of the week!

@nukestrom5719 Жыл бұрын

Thank you so much. You saved us from an expensive replacement. It worked just as you said. Superb.

@DDIY-Guy Жыл бұрын

glad it worked for you! thanks for commenting. have a fantastic rest of the week.

@ManjinderSingh-sk8ij 9 ай бұрын

Very helpful Vedio for me , u save my lot of money .thanx

@DDIY-Guy 9 ай бұрын

Glad the video helped! Thanks for commenting. Have a fantastic rest of the week!

@fumeilie1970 2 жыл бұрын

Thank you thank you for the tip, it totally worked for my problem, to fixed a just only1 year old mixing valve. This is a new replacement of previous mixer valve which had the same problem before. GBU.

@DDIY-Guy 2 жыл бұрын

glad the video helped. thanks for commenting!

@katetoyloy6965 11 ай бұрын

Thanks a million for the clear explanation. Was an easy fix! Much appreciated!!

@DDIY-Guy 11 ай бұрын

Glad it worked for you. Thanks for commenting! Have a fantastic rest of the week.

@wordbird9830 2 ай бұрын

You can buy a filter system that limits the sediment. Plumbers are not required to install them, but an inspector will tell you they’re required.

@aarongreensr9347 5 ай бұрын

This is a great video! By chance, what type of tool do you use to unscrew that mixing valve cap?! None of my screwdrivers fit! Once I get that off, hot water here we come! Thanks again!

@DDIY-Guy 5 ай бұрын

Mine was a x head screwdriver (Philips). You might have to get a set of them from the hardware store and if you don't already have one, you might need a Plier Wrench to turn the valve. This is a great wrench to have in your DIY tool box.

@andrewrestoration9811 6 ай бұрын

Thanks!! Watched the video. Saved money.

@DDIY-Guy 6 ай бұрын

glad it helped. thanks for commenting. have a great weekend!

@peterc.7807 2 жыл бұрын

Counter-clockwise is the other way no ? Also you left the valve all the way on the HOT side, shouldn't you adjust it so that it mixes cold and hot and you don't get scalded at the faucet ?

@DDIY-Guy 2 жыл бұрын

Oh boy, you are right….sorry, to tell you the truth….not sure which way is hot or cold….basically turning it one way or the other will loosen the debris that is in the line. Also really important to check the filters on any faucets that seem to have low water pressure like I show at the end of the video.

@peterc.7807 2 жыл бұрын

@@DDIY-Guy Hot and Cold should be written next to that valve so you know which direction to turn. Mine is counterclockwise for more Hot Water.

@dans150 6 ай бұрын

Hey Danny, as a plumber do you recommend having the faucet loose on the sink as shown. Must be some advantage there?

@DDIY-Guy 6 ай бұрын

Good catch. This was my daughter’s place so I fixed that as well after making the video :-)…. and no, I’m not a plumber, just a dad that wants to save some repair cost for his daughter ;-)

@zhuraymond464 Жыл бұрын

Very helpful! Thanks for sharing 😊

@MrWebertube 5 ай бұрын

Thanks for the vid Funny that your tap is all loose though, 2:00 with all your knowledge why don't you fix it?

@DDIY-Guy 4 ай бұрын

You are correct and that faucet was fixed right after :-) This was my daughter’s house so yes, she had a lot of other things needed to be fixed :-)

@Jonnaybb Жыл бұрын

Thanks, this saved me a bunch of money. Worked, cheers.

@DDIY-Guy Жыл бұрын

glad it worked for you! thanks for commenting

@suzannewolf9850 10 ай бұрын

Is this the case if in some instances the water coming through is scalding hot and others it doesn’t seem to get hot at all?

@ineedhoez 6 ай бұрын

Thanks! I wanted to send you some of the plumber money! They charge 250 just to diagnose.

@braydensanto8013 10 ай бұрын

I'm having some difficulty doing this! As you show, the valve is likely stuck and the grooves on the cheapo plastic cover are pretty much stripped. I tried gripping with some pliers, and still this thing won't budge. Now some of the metal grooves on the valve are a bit deformed as well (since my pliers slipped along the value when trying to turn.) Any hints/tips/ideas for me?

@DDIY-Guy 10 ай бұрын

I think you will need to get the valve replaced.

@haines96 9 ай бұрын

Is your video flipped? Counter clockwise would be the other way...

@DDIY-Guy 9 ай бұрын

you are correct. sorry for the confusion.

@paultremblay123 7 ай бұрын

Worked, thanks very much !!!

@DDIY-Guy 7 ай бұрын

Glad the video helped. Thanks for commenting.

@sparlingsongs9296 6 ай бұрын

What do I do if the screw is jammed, and I can't get it out. There's some kind of calcification around the mixing unit.

@DDIY-Guy 6 ай бұрын

it’s probably best to get a plumber in and get it fully replaced.

@lukebailey3076 2 жыл бұрын

Thanks a lot, fixed our issue!

@DDIY-Guy 2 жыл бұрын

glad it worked for you! thanks for commenting.

@JS-yc8wj 11 ай бұрын

When he says notice, my eyes watch the faucet move 😅

@Tazawar144 10 ай бұрын

Is there a way to stop it from leaking from where the turn knob is?

@DDIY-Guy 10 ай бұрын

unfortunately, there is not a proper way to stop the leak. You will need to have the knob replaced.

@realmslayerxx725 2 жыл бұрын

Thank you! followed step by step and i have hot water again!

@DDIY-Guy 2 жыл бұрын

Glad the video helped and it worked for you. Thanks for commenting. Have a great rest of the week!

@tonybeaty880 3 ай бұрын

Great advice, but you need to secure your faucet or you will end up with a bigger problem.

@DDIY-Guy 3 ай бұрын

Yes, this was the next thing I fixed after I discovered it was loose. This was my daughter’s place so there were a few DIY fixes that happened that day :-)

@scupking 9 ай бұрын

I have noticed my hot water getting cooler over the months. It's odd when I turn the mixing valve to cold then hot the water pipe gets very hot but then cools down to warm after a few seconds. The pipe going into the mixing valve is burning hot so I know the issue is not with the furnace heating the hot water. Not sure what that means...

@DDIY-Guy 9 ай бұрын

You might have to get a plumber to replace the mixing valve.

@scupking 8 ай бұрын

@@DDIY-Guy Tried exactly what you said in the video and it has fixed the issue for now!!!

@DDIY-Guy 8 ай бұрын

Glad it worked. Thanks for commenting.

@ciarrzue6782 Жыл бұрын

Thank you sir!

@DDIY-Guy Жыл бұрын

glad it helped. thanks for commenting. have a great rest of the week!

@lukasiafrates9576 Жыл бұрын

Thank you!

@DaiXVearn Жыл бұрын

So I have opposite problem. Cold water works fine. Hot water Tap sends out boiling water even though I have temp set on lowest setting. What could be issue here ?

@DDIY-Guy Жыл бұрын

The mixing valve might not be closing properly. The alternative to lowering your water temperature is to turn down your hot water tank from the base control panel.

@DaiXVearn Жыл бұрын

@DDIY-Guy thank you. So I have it set on A setting in heater which equates to 120f. But my hot water Tap sends out 120f water. Is this expected or should be lower?

@DDIY-Guy Жыл бұрын

The average temperature setting for a household hot water tank is typically around 120 degrees Fahrenheit (49 degrees Celsius). This temperature is considered a good balance between preventing the growth of harmful bacteria, like Legionella, and providing hot water for various domestic needs without scalding. However, it's essential to adjust the temperature based on the specific needs and preferences of the household while keeping safety in mind. I would just adjust the temperature at the faucets.

@benprice5067 27 күн бұрын

Just did this and now have hot water again.🎉

@DDIY-Guy 27 күн бұрын

That’s fantastic! Glad it worked. Thanks for commenting

@LucidScience Жыл бұрын

At :58, you are turning clockwise, not counterclockwise.

@DDIY-Guy Жыл бұрын

Great catch. Thanks for commenting.

@katetoyloy6965 11 ай бұрын

Thanks!

@MrEmery15 Жыл бұрын

thank you for this video!

@DDIY-Guy Жыл бұрын

glad it helped. thanks for commenting. have a great rest of the week and weekend!

@KBradAdams 2 жыл бұрын

We have one on under one vanity in our bathroom to goes to a soaking tub and the water barely gets warm. Brand new townhome! Someone told me I could turn the Mixing Valve around backwards and it would bypass the anti scald or mixing valve? Anyone know if this works? The real issue is the rest of our house will scald the shit out of you, even the kids rooms so why put this anti scald on an adult soaking tub if you can burn yourself on every other faucet and shower in the house? Makes no sense to me!

@doctordutch Жыл бұрын

I hate being a homeowner. i just want to live in a barn.

@DDIY-Guy Жыл бұрын

ya, there seems to always be something that needs to be fixed :-/ Hang in there.

@stevennugent9236 11 ай бұрын

why do you turn it clockwise and tell us its counterclockwise ????????????

@DDIY-Guy 10 ай бұрын

Thanks for the correction. it doesn’t really matter which way it turns though, as long as you turn it the way it allows you to rotate so you can loosen the debris that is clogging up the valve.

@norain31 5 ай бұрын

i appreciate your video .But as a plumber why is your plumbing so bad ..lolo your tap is loose . also note that , some mixing valves are not serviceable and must be replaced . I clicked on link to see if perhaps you had a hack to soak in CLR or something to remove scale . Thanks danny now get under that sink and secure that tap . haha .

@DDIY-Guy 4 ай бұрын

You are correct and that faucet was fixed right after :-) This was my daughter’s house so yes, she had a lot of other things needed to be fixed :-)

@CamMorgan-i7m 2 ай бұрын

Honestly better off just replacing the valve in my opinion playing with these doesn’t always end as good as it does in the video.

@DDIY-Guy 2 ай бұрын

does hurt to try it anyway. It takes a few minutes to do and doesn’t cost a thing. And yes, if it doesn’t work, then get the valve replaced.

@Fluterra 3 ай бұрын

Dumb advice. I tried it and it didn’t work AND my main faucet is now clogged and running slowly. Debris must be trapped inside. The only way to solve this is to replace the AM3 or get a retrofit kit. DUMB ADVICE.

@DDIY-Guy 3 ай бұрын

Sorry to hear it didn’t work for you. it seem to work for a lot of other people so maybe yours was really clogged with debris. anyways, thanks for commenting.

@Fluterra 3 ай бұрын

@@DDIY-Guy I know have a new problem - how to take apart my kitchen faucet to clear the debris that is hopefully stuck in the cartridge. You turned 1 problem into 2! You should run a tap that is easy and cheap to clean when you are doing this. You also say that you should turn it “counter-clockwise” to get cold water - it’s clockwise.

@Fluterra 3 ай бұрын

You are NOT fixing anything here - you are spreading the problem and shifting it elsewhere. If the mixing valve has seized, it needs to be replaced.

@DDIY-Guy 3 ай бұрын

it didn’t seize, it only had debris clogged and loosened. The water has been flowing great ever since. Read the hundreds of comments that this method has worked for. Sorry it didn’t work for you so yes, you will have to replace your mixing valve. thanks for commenting anyway.