How to fix your sticky/shiny/melting Dashboard - Toyota Camry, Lexus, Nissan, Mazda, Kia & Subaru

The Sticky Dash Fix is an effective, easy and permanent two-step, do-it-yourself Dashboard repair solution. stickydashfix.com
Step 1. A Surface Cleaner, formulated to quickly and easily remove sticky plasticizers, dirt and debris, is applied to prepare the Dashboard surface.
Step 2. A Surface Coating is applied which bonds to the Dashboard surface to form a thin, yet strong and flexible membrane, which after a number of light coats, effectively seals the surface.

[@PapillonOne]

1:25 what is being used to fill gouges and scratches? Is it included in the kit? I don't see a filler listed in the kit, or did I miss it? I have quite a few to fill, so I'll need to know this before I move forward. Thank you.

[@marthashaffer8295]

My daughter transformed the dashboard on her camry with this and she is so happy!

[@3dformulations383]

Thanks Martha! that's great to hear. Keep an eye on it over time - some of the Camry dashboards can be particularly bad in the areas closest to the windscreen and we recommend retaining the left-over Surface Coating in case any touch-ups are required in the future to completely overcome the defect. Best Regards, SDF.

[@3dformulations383]

Thanks for your order. We are more concerned with applying the Surface Coating in direct sunlight. The curved glass sections of the windscreen can magnify direct sunlight and cause the Surface Coating to dry too quickly. The product is water-based and can be thinned with water (10-20%) to slow drying time.

[@jimadams7223]

I purchased this product for use on my 2007 Toyota Camry and I am sorry to say it was a complete failure. Everything was neatly packaged with clear instructions. But the application of the cleaner left my dash as sticky as other. I was hoping for better.

[@artsyafroqueen]

Ah, this is my exact car and I really want to clean this properly... so this is good to know.

[@eduardouresticharre6873]

Thanks for the info!

[@ainsley7662]

The product, not only can fix a sticky dash but if your dash is a little tired and needs a refresh, well, this product will make it look brand new, just amazing, I even had a few small hairline cracks, not that the product recommends being used to fix this but it sure did, a terrific result

[@rabramMD17]

Is there a preferred temperature outside to perform the fix? (Just ordered some)

[@addanametocontinue]

I used this on my car Lexus. Ended up using 1.5 bottles of the stuff to finally get rid of the stickiness. Not sure if I just needed that may layers or if I didn't apply enough layers in a single go with the fist bottle and that allowed oil to permeate through the layers, requiring further application. When I got the 2nd bottle, I put on 3 layers over the course of 2 hours and that did the trick.

[@kelvincaro6451]

Just came in today 28 days to be exact but what u expect when it’s coming to PhX Arizona product can’t be purchase anywhere else but there site. Just waiting to buy a filler to get this done perfect 👌🏽

[@3dformulations383]

Thanks Kelvin, Any filler should work fine, so long as it's water-based and flexible. Put down a light coat or two before you apply the filler as this will provide a chemical resistant layer between the dashboard and the filler. You can also mix some Surface Coating with the filler to improve the flexibility, chemical resistance and compatibility of the filler.

[@justinp.3256]

1:25 what is being used to fill gouges and scratches? Is it included in the kit? I don't see a filler listed in the kit, or did I miss it? I have quite a few to fill, so I'll need to take care of them before applying the coating

[@MrTikibars]

Still wondering this myself

[@renoleevans]

Sticky Dash Fix - Filler/Surface Stabilizer which uses the same resin-system as the Surface Coating to ensure compatibility and flexibility.

[@theresak4343]

The Sticky Dash Fix - Filler/Surface Stabilizer is not included in the pack; I just looked it up on their website; the stabilizer is $9.95 for a 50 ml/3.52 fl oz bottle.

[@NorIsFlop]

where will i be looking to buy this? my 14 year old camry decided its dash wants to crack up and be sticky

[@Terrific10byTna]

DAMN!! Wish I would have had this for my 2007 Altima's dash

[@3dformulations383]

It's never too late!

[@thisqueenieisunique2896]

I’m gonna try this with my 2009 Nissan Altima dash it needs it

[@albertobautista7959]

I gonna try with my nissan altima 2008, but I want to be sure if it works..

[@robertsiwicki4597]

Purchased this a few months ago for a 2007 Camry with a black dash. My dash would get very soft if I left it out in the direct sun but not sticky or have dirt stick to it and was always easy to clean. I park inside a garage for work and home so it’s not out much in direct sunlight and heat but I live here in Miami. So I did this as preventative maintenance before it got worse and therefore was not easy mentally to try and fix something that really was not fully broken. Used foam brushes but they left streaky marks after 3 coats. Next day I got a roller brush. Night and day difference how easily it applies with a roller brush and absolutely no streaking. It’s a dead on match to the original trim. Fairy easy to apply but only need fairly thin coats as in some places I would see it pool like somehow it was growing pools but not in areas where paint might drain too. So there it is necessary after applying with the roller brush to smooth out the areas it was pooling. Very impressed with the feel and look of the finished product. Ya all chemical engineers did a GREAT job!!! Thanks

[@3dformulations383]

Hi Robert, Thank you very much - not many people take the time to share their feedback, it's very much appreciated!

[@ainsley7662]

WoW, what a product, so easy to use / apply and incredible results, I had thought my car was a goner with the dash in such a sticky state, this product just worked, after the first thin coat, and after three more it was back to a brand new standard, wow, just awesome

[@Lonbites]

Are you a real customer or a paid one? I want something to really fix my problems and want a product that really works. So your honesty would be appreciated

[@ainsley7662]

@lonbites965 I'm a real customer, product works a treat, easy to apply and great results

[@Lonbites]

@@ainsley7662 how many coats did you have to do? And how long in between time to add another coat?

[@ainsley7662]

@lonbites965 3 or 4 coats, applied when touch dry ie 10 minutes or so

[@Lonbites]

@@ainsley7662 so buying one product should be enough for my Camry?

[@cfcamacho80]

I just saw your video on how to clean and fix the cracks in these type of dashboards. I have a Nissan Altima 2010 and throughout time, I've been seeing these cracks along the trim lines and on the passenger side. I live in a city where hot weather is very common. And usually the surface feels sticky to when I try to wipe off the dust n debris. The fibers from the cloth stick. Will this is stuff help to fill the cracks and not make the surface so sticky? I'm guessing I have to get a filler to fill in the cracks first before applying this stuff. Where can I find fillers? Sorry if I'm asking too much I just don't know much about this kind of stuff.

[@teamskdm1]

look on ebay for a plastic altima dash cap. theyre like 250$ but they go over the existing dash and make it look factory new again and wont crack like the original.

[@zwimlil7731]

Is this work well for Lexus IS250? (2008)

[@blue52851]

how do you keep it clean after applying? Do u just use the regular dash cleaners?

[@angelinajack]

Now that’s it’s been 3 years how does it look on this current car now?

[@aquaredable]

Very impressive product.

[@hmorris]

Would it be better to apply the protection in a circular motion to avoid streaks?

[@3dformulations383]

Hi Hayden, By demand, the Surface Coating is very matte and we recently discovered that using a damp micro-fiber cloth to wipe away any brush marks or streaks, while the Surface Coating is wet - works a treat. The micro-fiber cloth which is included in the kit can be rinsed out after being used to clean the dashboard surface and then used to wipe away any lines. Customers have also had great results using a small micro-fiber roller.

[@g.michaelcoss1047]

Where do I get this product???

[@arielish2923]

Do you ship to Argentina?

[@hoppas77]

HI, I only have a small area of stickiness, but my main concerns are the cracking around the seams of the dash. Will your product help with that or do you sell a product for this issue? Or do you know of one? I have a 2011 Nissan Altima. Thank you for your reply.

[@3dformulations383]

Thanks for your question. It sounds like the adhesive under the top material of your dashboard has mostly migrated downwards into the foam layer below - causing the top material to become brittle and crack as the dashboard expands and contracts. Due to demand, we now produce our own "Filler/Surface Stabilizer" product which uses the same resin-system as our Surface Coating to repair cracks.

[@hoppas77]

@@3dformulations383 Wonderful! Thanks so much for the reply. What is your website?

[@3dformulations383]

@@hoppas77 Our website is: stickydashfix.com

[@assholesplace]

@@3dformulations383 where do I order the filler as I don't see it on your website?

[@3dformulations383]

@@assholesplace Thanks for your message. We now include some of the Flexible Filler product with each kit. Best Regards, the SDF team.

[@ecahatch]

what is the white product you used to fill the gouges and scratches?

[@hesomshirazi-garner2428]

Myself I used SUGRU glue putty

[@seanh9488]

Is it work ?

[@damenainmaxwell680]

Is one kit enough to do the dashboard and door panels of my Lexus is250?

[@3dformulations383]

Hi Damenain, We offer the option to purchase an additional bottle of Surface Coating with your kit, should you need to treat your door trims too.

[@TheCachete33]

What do you use to fill in the scratches

[@3dformulations383]

Thanks for your question! We recommend applying a few light coats first and then assess if it's worth attempting to fill any gouges, sometimes filling larger gouges can make the repair obvious, because it's difficult to match the dashboard texture. We don't recommend any particular hardware-store filler brand, so long as it's water-based and reasonably flexible. You could also try mixing the Surface Coating with a suitable filler to improve flexibility and compatibility of a filler. You are very welcome to send some pictures of your dashboard to our Product Developer, his email address is [e-mail] and he will give you an honest opinion of the results that you can expect in addition to any advice and tips.

[@3dformulations383]

We recommend applying a few light coats first and then assess if it's worth attempting to fill any gouges, sometimes filling larger gouges can make the repair obvious, because it's difficult to match the dashboard texture. We don't recommend any particular hardware-store filler brand, so long as it's water-based and reasonably flexible. You could also try mixing the Surface Coating with a suitable filler to improve flexibility and compatibility of a filler. You are very welcome to send some pictures of your dashboard to our Product Developer, his email address is [e-mail] and he will give you an honest opinion of the results that you can expect in addition to any advice and tips.

[@98_aus_burban82]

Can this be used of glove compartment cover or is it only for dashboard?

[@3dformulations383]

Yes, it can. Often, the glove compartment and lower sections trim sections are made from the same materials as the dashboard.

[@mikei.4096]

What if your dash is only melting and doesn't have chips and holes Do i still need to use both products

[@3dformulations383]

Mike, I'm glad to hear that you're Dashboard isn't too bad. You won't need to use any filling product, but you will still need to use our Surface Cleaner before applying the Surface Coating.

[@soccerjoker95]

I have an 08 Nissan Altima in need of this. Can't find the product for my car.

[@3dformulations383]

Thanks for your interest! We are building our color portfolio to include Nissan models. Please feel free to send some pictures of your dashboard to: [e-mail] and I will suggest a match and give you an honest opinion on the results you can expect to achieve. Regards, Derek Arnnarle - Product Developer.

[@C0nspiracyNy]

Will this work on my infiniti g35 coupe black dashboard? Your website only has a select few cars

[@3dformulations383]

Hi Kozmic, Yes the product will work on any dashboard. We now have the Nissan/Infiniti charcoal color available. You are very welcome to send some pictures of your dashboard to: [e-mail] and our Product Developer will give you his honest opinion of the results you can expect and any additional application tips or suggestions.

[@C0nspiracyNy]

3d formulations how long is the shipping process, i got my confirmation number but thats it

[@3dformulations383]

@@C0nspiracyNy Hi Kozmic, If you have'nt received an update by now, please send me your order# to [e-mail] and I'll investigate.

[@garypitzer8729]

Where can I buy this stuff at? I didn't see any links in the description.

[@3dformulations383]

Hi Gary, Our website store is: stickydashfix.com

[@elisexperience2915]

What are you using to fill holes and cuts. I just got my shipment today and I have no idea what to use to fill

[@3dformulations383]

Eli - Any flexible filler (preferably water-based) from a hardware store will work fine. Use the filler AFTER you have applied a few coats of the Surface Coating as this will provide a chemical-resistant barrier between the defective Dashboard surface and the filler. The Surface Coating is then applied over the top once the filler product has dried. By applying the Surface Coating first, you will also get a better perspective of the renewed appearance of the Dashboard and whether or not to fill any holes or scratches - we feel that sometimes filling some imperfections can draw more attention to them and "less is more".

[@elisexperience2915]

3d formulations thank you!!!

[@meirbeksafiyanov7894]

Eli’s Experience how did it work out?

[@caramellohoney]

@@elisexperience2915 what did you use as a filler if you used one??

[@elisexperience2915]

@@caramellohoney I have yet to get to this project yet I’m going to buy regular all weather caulking from Home Depot. Let it do it’s thing and dry and then paint it after

[@hassanhumud3950]

can I order now ?

[@shan59299]

Hi how can I order the product in Qatar

[@thegreatexchange1716]

Will this product also help reduce the glare (our dash, in a 2009 Toyota Camry Hybrid, is very shiny, and melted) ?

[@3dformulations383]

Hi Jesse, Yes the Surface Coating dries to the correct matte finish. You'll find lots more information at: stickydashfix.com

[@winthanonh]

Toyota should have a recall on this. My 2011 Camry has this problem. It’s a safety hazard. Even my 1995 Acura doesn’t have this problem.

[@ccfromnewzealand5109]

Hi there I am looking at one these kits for my lexus IS. Will the dash kit be enough for just the dash.. do I need to order another kit for treating door panels also? Thanks

[@3dformulations383]

Hi CC Nz, There is an option to purchase a subsidized extra bottle of the Surface Coating when you checkout. You can also dilute the Surface Coating by 10% with clean water, to make the product go further.

[@uberredskn]

Turn your demist on and apply talc. Buy a custom made dash mat online. Problem solved. I live in the Pilbara where outside temperatures can reach 46c so inside is a furnace. I did this fix 3 yrs ago and the dash under the mat is still smooth.

[@TheJimmyCobra]

Hi there! How can I reach you? I need do buy some of those, but I'm Brazil. Can you help me please?

[@3dformulations383]

Hello! Our website is: stickydashfix.com

[@MR-my5ff]

how can i order this?

[@theresak4343]

Many people are asking this in the comments. The Sticky Dash Fix - Filler/Surface Stabilizer that fills in the cracks is not included in the pack, which is $49.95 on the website; the stabilizer is $9.95 for a 50 ml/3.52 fl oz bottle.

[@Jioaa1988]

Thank you, I can’t believe it doesn’t already come with the kit or offered as a bundle when purchasing the kit.

[@theresak4343]

@@Jioaa1988 I just bought the kit, along with the stabilizer; as soon as I apply it, I'll leave a review here.

[@JoseAlvarado-nk5rb]

@@theresak4343update??

[@theresak4343]

@@JoseAlvarado-nk5rb I just applied this product on Thursday; the stickiness is gone, and most importantly, the glare is gone, I was relieved; however, the Sticky Dash Filler that I bought separately didn't work as I expected; I tried to apply with my finger, with a brush, and with a dabber, and every time I wiped a bit, it didn't fill the small holes on the dash; but you know what, that is really not important to me, the glare and stickiness were the reasons I bought this product; I recommend it for anyone with this problem.

[@WXYZ9998]

@@theresak4343?

[@rafaellima1405]

Good afternoon, will you deliver this product in Brazil?

[@3dformulations383]

Hi Rafael, Thanks for your message - yes we ship to Brazil.

[@Afrocow888]

Saw a few comments on Facebook about shipping delay

[@3dformulations383]

Yes, there were delays last year during the beginning of the pandemic. Australia's international border was shut off to the rest of the world and there were very limited freight planes to and from Australia. Thankfully shipping times have greatly improved since then.

[@luisaalbarran1401]

I ordered this product, the cleanser worked very well but the color is way too dark. I have a medium grey dashboard and I received either black or very dark grey. There aren't any other choices on the website. So I'm back to shopping around.

[@3dformulations383]

Hi Luisa, That's very easily fixed - please email your Order# to: [e-mail] and I'll have another kit sent out. Your dashboard color may not have been available at the time you ordered. We are constantly adding more makes, models and colors to our portfolio. Best Regards, Derek - SDF

[@luisaalbarran1401]

@@3dformulations383 Thank you for your prompt reply. I emailed the information requested.

[@justaman3817]

What was the verdict?

[@alkhaldi242]

How long the shipping will take to the U.S.?

[@3dformulations383]

Hi Mohammed, Shipping is still a bit slow due to Australia's border closure and limited outbound international flights, so allow 14 -18 days delivery to the U.S.

[@usmannafees5451]

Where do I order this product? Is it available in the USA?

[@3dformulations383]

Hi Usman, Our products are available at: stickydashfix.com For now, we ship internationally from Australia.

[@inthenewsbw2003]

Can i use a sprayer to apply the second coat, so as not to show brush strokes?

[@3dformulations383]

Hi Shah, I don't think spraying is necessary - brush strokes can be dealt with simply by using a piece of sponge to apply a light coat using a "dabbing" motion to even out the finish. The foam brushes supplied with the kit do a good job at reaching into the difficult areas closest to the windscreen, but can leave some brush marks sometimes.

[@butchsison8751]

How to order?

[@karely73]

The weather is so hot, I went to buy some pizza and just put the box on top of it for about 5 min while I grabbed a bite and it melted…. 😞 now it has some holes, bumps and types of scratches lines because of the pizza box… So does it really work???

[@3dformulations383]

Hi Elyna, I'm sorry to hear about your experience, we have seen the same happen when lifting up dash mats that have stuck to the surface over time. We have developed our own flexible filler product which uses the same resin-system as our Surface Coating - this will help in restoring some of the damage. Regards, the SDF team.

[@ravigrewal3510]

do your kits include the filler and paint? free shipping to canada?

[@3dformulations383]

We recommend applying a few light coats first and then assess if it's worth attempting to fill any gouges, sometimes filling larger gouges can make the repair obvious, because it's difficult to match the dashboard texture. We don't recommend any particular hardware-store filler brand, so long as it's water-based and reasonably flexible. You could also try mixing the Surface Coating with a suitable filler to improve flexibility and compatibility of a filler. You are very welcome to send some pictures of your dashboard to our Product Developer, his email address is [e-mail] and he will give you an honest opinion of the results that you can expect in addition to any advice and tips.

[@binayaktimalsena680]

Just wondering any link to buy this product thank you

[@3dformulations383]

Hi Binayak, our website is: stickydashfix.com Regards, the SDF Team

[@Eddycmj1]

Do you ship to Nigeria? I reside there

[@3dformulations383]

Yes, we ship world-wide.

[@bbnCRLB]

Did you later order yours and got it in Nigeria? If yes, please how did you go about? Was it seamless? And did the product work the magic for you?

[@TheBlooRayChannel]

What product do you suggest when it comes to filling dashboard scratches and gouges?

[@3dformulations383]

We receive many requests for recommendations regarding a suitable flexible filler to fill cracks and gouges, so we decided recently to create our own. Our Flexible Filler product uses the same resin system as the Surface Coating so it is compatible, extremely flexible and provides a strong, chemical resistant barrier. But here's the kicker; it's color-matched like the Surface Coating and doesn't require sanding - once the filler is dry, rubbing alcohol can be used to "sculpt" the filler and wipe any excess product away.

[@TheBlooRayChannel]

@@3dformulations383 not entirely helpful since you don't have said product on sale.

[@3dformulations383]

@@TheBlooRayChannel We're just waiting on the jar labels to arrive from the printers.

[@Avinash-zj1yk]

I am from India, what do I use when our dashboard is melt on the edge, your suggestion is more important.

[@TomeiARC]

Bob's and vagene

[@AB-zh3dk]

I just picked up a used camry with a sticky dash. Does his really work?

[@joesou5376]

2:31

[@joesou5376]

2:31

[@ryan8040]

I have applied..tried to avoid brush marks. No stick upon first application which is great but it does look terrible. Lots of brush strokes all over. Is there anyway to improve this??

[@3dformulations383]

Hi Ryan, There is a trouble-shooting section on the back of the instruction booklet. As per the instructions, patchiness and brush strokes can be corrected by using the flat side of the foam applicator brush to apply a light coat, over the patchy areas, using a "dabbing" motion. The foam brushes provided with The Kit are good for reaching into the areas closest to the windscreen, but can leave brush marks. It is also possible, that even after cleaning with the Surface Cleaner, there is residue left from another cleaner or past dashboard dressing or detailing product. The Surface Coating contains a nano-particle matting agent which rises to the surface to diffuse light and some contaminants such as silicone can cause the particles to disperse unevenly causing a patchy finish.

[@PeoplesloverIam]

Hi I can't find it in UAE

[@reyyap2776]

Hi, i mazda 6 having the same problem on the dashboard which is melted. Anyway i can order in malaysia?

[@3dformulations383]

Hi Rey, Thanks for your message. Yes, we ship to Malaysia. Our website is: stickydashfix.com

[@riannahamilton3184]

Where can I get this product?

[@3dformulations383]

Hi Rianna, Our website is: stickydashfix.com

[@Lonbites]

Where can you buy this? Any links

[@3dformulations383]

stickydashfix.com

[@baileythompson1150]

What did you use to fill the holes?

[@egroh76]

prob just spackle

[@zwarst]

How to fix your sticky/shiny/melting Dashboard - Toyota Camry, Lexus, Nissan, Mazda, Kia & Subaru kzbin.info/www/bejne/Z5m2nHiMiNOZjsU

[@celestemastrocola8096]

I know of 4 people that didn’t have an issue with there dashboard until after the time period allowed 2017. It all started in 2018 and 2019 . There got to be a solution to the sticky cracking dashboard . Does anyone have a 3D printer?

[@marlenbatista9642]

I have a 2011 camry bought off the lot at 0 miles on November of 2010 and my dashboard melted!

[@lmanders2]

@@marlenbatista9642 same here, bought brand new in 2010 Camry, dash is sticky and shiny as all hell.

[@theresak4343]

My 2010 Camry has this problem.

[@jbplays7302]

My 2011 Toyota Camry has this same sticky surface. Will this product fix the problem?

[@mikewill9384]

Where is it sold

[@3dformulations383]

We ship world-wide. stickydashfix.com

[@EEmasigala]

The surface is way too shiny, it's becoming a hazard to drive. How do you remove it? I've tried traditional products and it gets sticky trapping lint. It looks worse now.

[@3dformulations383]

Hi Miguel, You're not alone, there are millions of vehicles from a number of manufacturers, affected by the sticky dashboard defect. Please find more information about our products at: stickydashfic.com Regards, The SDF Team.

[@josselynmachado8054]

does it come in color grey ??

[@3dformulations383]

Yes Josselyn, We have many color variants available and continue to increase the color portfolio.

[@killzxo21]

My windshield is hard to see out of sometimes from this sticky shit. My dumbass left my car w out a windshield protector when I deployed and I’m gonna buy this product. I almost died the other day and that was the last straw. Fixing this ASAP w this product

[@vanessawright5099]

Hi Francisco, I read the windshield protector would not help this manufactured defect. If all of your windows are closed, it will still get too hot inside the car. I think Toyota should back this problem and replace the dashboards. The glare is extremely dangerous. My 2008 Camry has had several recalls on it. Remember when the Toyota floor mats were getting stuck under the gas pedal. Several people lost their lives because of that defect. The company should be mandated to fix their defect.

[@theresak4343]

Don't blame your "dumbass." It takes longer than one deployment for this to happen. I know from experience.

[@Eddycmj1]

Please how can I get this kit. My 2010 Camry dash is so sticky .

[@3dformulations383]

Hi Maduafokwa, our products are available at: www.stickydashfix.com

[@3dformulations383]

I'm sorry your dashboard has become sticky. You're not alone, it has been quite distressing for many owners, and we're committed to your success.

[@Eddycmj1]

3d formulations I've made an order for your product to Nigeria. Hope to get it soon. 😊

[@3dformulations383]

It's on it's way!

[@Eddycmj1]

3d formulations I hope the brush for spreading the coat will also be added. It will be a perfect tool for that job.

[@saleemsheikh6929]

Is it available in UAE ? are you on amazon as well ?

[@3dformulations383]

Yes Saleem, we can ship to UAE - we're not on Amazon, our website is: stickydashfix.com

[@dangoll5967]

3d formulations can you pleeeeeeease put you product on Amazon. In would be a lifesaver for thousands of people. Literally!!!

[@dangoll5967]

3d formulations or at least lower the cost of the product by a little.

[@3dformulations383]

Thanks for the feedback Dan, what if it was available at your local Toyota Dealership?

[@dangoll5967]

3d formulations that would be great! But could you guys do it soon? The shipping price is 😳.

[@gonzalezdiazblog8932]

I will be ordering this product soon as my camry is a total disaster

[@3dformulations383]

Yes Rafael, the Toyota Camry and Nissan Altima dashboards seem to be the worst.

[@gonzalezdiazblog8932]

@@3dformulations383 thanks

[@3dformulations383]

Hi Riyas, We ship world-wide from warehouses in the United States and Australia. Our website is: stickydashfix.com

[@user-uz6lj4id8l]

Как заказать такой набор из России?

[@raechelle9219]

The dash still looks reflective 😢

[@kathmandun8749]

It comes out too shiny, I challenge this company to come out with a perfected product that makes the dashboard look more original

[@silvestrecg90]

I just applied on my corolla 2007. It wasn’t looking 100% original because in my case, I could still see the lines of the brush after a few coats of the product. 2 days after the application I’ve applied meguiars ultimate protection and now is looking awesome.

[@ryan8040]

@@silvestrecg90 did it get rid of brush strokes??

[@caramellohoney]

@@silvestrecg90 did you use a different product after sticky dash?

[@caramellohoney]

@@ryan8040 I want to know too??

[@silvestrecg90]

​@@ryan8040 not 100% but I applied Ultimate Protectant - Meguiar's after the sticky dash fix and looks good. Stills a bit shiny but definitely not melting anymore.

[@je4n]

send to brazil?

[@3dformulations383]

Jean, yes we ship world-wide including Brazil.

[@jmq9270]

Anyone else just here for the music?

[@mperez2113]

Please, save your money. The product does not work. I applied it several times and today I took my car for a ride after the winter and as soon as the sun hit the dash it started to shine and get sticky. I had some hope with this product but it did not fullfill my expectations.

[@3dformulations383]

Dear M Perez, We have helped thousands of motorists world-wide rectify their defective dashboards - something that the vehicle manufacturers couldn't or wouldn't do. As stated on our website: "The Surface Coating is a permanent product - however, every dashboard will be in different in condition. The same applies to the various makes and models affected by the defect. The chemical reaction occurring on some dashboards can be very aggressive and over the long term, may require additional coats or touch-ups. Some areas closest to the windscreen and the instrument hood may require more coats to permanently overcome the adhesive. We recommend retaining left-over product in case touch-ups are required in the future". We want every customer to get a great result and are prepared to do whatever it takes to achieve this. Rather than leaving comments, please email our Product Developer [e-mail] with your Order# and some pictures of your dashboard and I think you'll find he'll be very pleased to re-instate your hope in the product. The SDF Team.

[@wapperjaw8282]

Egads ... has anyone sued you yet for this advise???

[@Heisrisin3]

Don't waste your money. Use Orange Glo.

[@kathmandun8749]

Looks horrible

[@ramonayala5796]

JUST GET A DASH COVER FOR 49.00 $ AND PROBLEM FIXED 🤷‍♂️

[@sc3034]

Dash covers can (and do) affect airbag deployment.

[@butchsison8751]

How to order?