How to Frame a Hockey Jersey | STEP BY STEP |

[@dylangriffin5778]

Watched 4 or 5 videos and none of them were this good! Thanks man gonna be getting my signed kucherov and Gretzky in frames today

[@jonathonclaro]

Sick! Glad I could help!! Happy framing :)

[@nicholehazelzet7733]

Just bought the same shadow box today at Michael's original price $109.00 and had a 50% off coupon. I would recommend using fabric tape not double sided tape.

[@jonathonclaro]

Nice! And thanks for the recommendation!

[@mikemccormick6710]

This is a great tutorial! I have a game issued Crosby St Patrick’s Day jersey and it is killing me. It has a shamrock on each shoulder and I can’t get them to lay flat. I’ll try your way now. Also, I wasn’t prepared for how difficult it was to push those pins in. Thanks again!

[@jonathonclaro]

Oh wow, that’s awesome! Glad my video could help. Thanks for watching and good luck👍

[@Colecaufieldfan]

Thank you for the amazing video I just framed a jersey and your tips helped a lot.

[@jonathonclaro]

That's awesome! Glad I could help :)

[@richg8530]

Great video...thank you for the tutorial and recommendations. Looking to frame my first jersey and I will be using your vid for reference. Thanks again!

[@jonathonclaro]

Awesome! Glad I could help👍

[@xt6746]

Nice review. I was totally the same way when I picked it up from Micheals -> “wow this is big. AND heavy!” Definitely need a car to take it home”

[@jonathonclaro]

Haha yes! For sure!!

[@toddhill5264]

Great video jonathon, I bought the same shadow box from Michaels and I wasn't sure how to place my jersey inside and your video really helped! Thank you!

[@jonathonclaro]

Great! Glad to hear👍

[@24lorlyn]

Nice work!

[@chantal7]

Thanks for the video! Super helpful! I ended up having crappy thin double sided tape too, and ended up using some gorilla stuff I had laying around. The foam board in between I didn’t know was a thing so that is super helpful! Cheers!

[@jonathonclaro]

haha glad to hear the video could help you out! Thank you!!

[@NessieFromTheLoch]

This looks sick! I’m trying to figure out a way to frame a Henrik Lundqvist jersey but the numbers are SO wide 😅 gonna try your way and see if I can squeeze the sleeves in there without covering too much

[@andrewnelson7010]

This is great, definitely gonna follow along to get my Crosby jersey in one!

[@jonathonclaro]

Haha glad I could help!

[@laurasmith6636]

Great video!! I'm trying to do this for my daughters big Christmas gift. I was quoted around $400 to have it customed framed. I think I'll follow your steps & give it a go. Thanks

[@jonathonclaro]

That’s a great gift idea! I hope I can help👍

[@laurasmith6636]

@@jonathonclaro and we're Team NY Rangers...I'll post a pic after I get it completed

[@bchnwgn]

Nice job! I appreciate the fact that you thoroughly reviewed every detailed step, and did not skip over like so many other videos on the same subject. This video was also appealing to me as you used the same shadowbox that I just purchased to mount an old tour jacket. I hope to get started on my project soon. I purchased T-head push pins hoping they'll be easier to work with. Questions: 1) Did the pin ends go through all layers? If yes, how did you deal with it? 2) Since your project was completed a few months ago, has everything held together since hanging the shadowbox on the wall?

[@jonathonclaro]

Thanks for the kind words! This is exactly why I wanted to create this video, so many creators would skip over small but important steps/details. For question 1: Some pins did go through all the layer, some just stuck into the foam board which worked out as well. I would recommend trying your best to get the pins all the way through each layer to ensure everything stays on tight. To deal with the pins that poked out through the back, I simply bent the ends to keep them flat against the back of the foam board. For question 2: Everything has held together since hanging them up. I actually framed another signed hockey jersey the same way shown in this video and it has also held together so I wouldn't be too worried about it.

[@metrodraft]

Great video. Not a Leafs but everyone is a Gilmour fan! lol

[@jonathonclaro]

Haha thanks!

[@stuerk]

bro its perfect, have a good day :)

[@PsychNurse.]

I've been seeking how to frame long sleeve t-shirt to capture deco screen printed sleeve and shape into position. Thanks

[@jefflam1703]

Nice job! What did you do to the pins that pushed through to the other side? Did you bend them over flat?

[@jonathonclaro]

Yes the best I could!

[@geern2000]

excellent demonstration how to frame jersey

[@jonathonclaro]

Thank you thank you

[@HIRSCHFELDNextInLine]

Very nice! Have you been able to hang the frame to the wall? I have same shadowbox from Michael's and it has a ton of weight to it. Worried about how to mount it to wall. Any suggestions?

[@jonathonclaro]

Funny you ask lol. I have not hung up the frame just yet, I have it leaning against the wall right now. I haven't found a spot yet for it. I will keep you updated though!

[@kpax45]

Looks good

[@jonathonclaro]

Thank you!

[@winner1604]

Great job. What is the size of the frame that you bought

[@jonathonclaro]

Thanks! 30" x 40"

[@frattin1]

Thank you great video.

[@Diabrolic]

nice video bro will let you know how my process goes

[@jonathonclaro]

@@Diabrolic thanks! Yes let me know how things turn out👍

[@Diabrolic]

@@jonathonclaro yo bro the video helped a lot! Thanks bro. Putting the pins in at an angle was a great tip, if not that process would have been awful. One thing I would suggest idk if you mentioned it but that hook inside of the case, I removed it by just twisting it off. Thought the jersey looked weird with the hook that’s intended for a hanger not being used since we have it held up by pins

[@jonathonclaro]

@@Diabrolic glad I could help! And ya that’s a good point. I think i might have realized that came out afterwards haha!

[@rodneylynn1977]

Do the pins go through the back of the board?

[@jonathonclaro]

Yes a little. I just pushed on them to lay them flat.

[@Tjm95]

Use fabric tape or even hem tape

[@jadchor9036]

Very helpful!

[@jonathonclaro]

Glad I could help!

[@VZ71]

Ok I just bought one of these frames and I don’t trust those mounting screws and brackets seems like a lot of weight for those two screws to hold this …. What did you use to hang it ? Thanks I’m advance great video !

[@jonathonclaro]

Hey I actually haven’t hung it up yet as I haven’t found a good place for it.

[@VZ71]

@@jonathonclaro I don’t know what to do i may just do the same and leave it on the ground no way these screws hold that

[@jonathonclaro]

@@VZ71 ya I’m not sure how I will do it either. I’ll let you know if I ever hang it up.

[@xt6746]

9 months later - did you manage to hang this ? Just picked it up from Michaels today and boy is this thing hefty. Will definitely need a good hook and anchor setup.

[@Derek-948]

Excelente vídeo!!!

[@jonathonclaro]

Thanks so much!

[@VZ71]

Is there any space between the glass and jersey once inside or it’s pressed right up against the glass ? And is it glass or plexiglass

[@jonathonclaro]

There’s space between the jersey and the glass. And it’s glass not plexiglass

[@daynacolang8988]

What size was your frame?

[@drewfarbridge7046]

Keeping the tags on was a choice..🤔

[@marcpatrickroy]

Great learning exercise... too bad its a Leaf shirt. From a Montréal viewer. LOL

[@jonathonclaro]

It sure was. Lol booooo. Just kidding, thanks for checking out the vid!

[@frostisbestinworld]

I bought an 18 x 24 online. Is that going to be way too small?

[@jonathonclaro]

I’m not sure. It depends on the size of the jersey as well. When I bought mine I was told to go to with the biggest.

[@frostisbestinworld]

@@jonathonclaro they are 50-52 hockey jerseys

[@jonathonclaro]

@@frostisbestinworld ya I’d go with a larger frame just in case. You can try with the one you have but it might be a little tight.

[@frostisbestinworld]

@@jonathonclaro thank you for the help!

[@alexwilliams6678]

What size is the foam board?

[@dmax64]

Link in the description will tell you the size

[@tommytalaga6613]

Didn’t the pins go through the black board

[@jonathonclaro]

Some of them did, yes

[@tommytalaga6613]

@@jonathonclaro did u use anything to cover the pins going through I’m framing a jersey also

[@jonathonclaro]

@@tommytalaga6613 no I just bent most of them down against the black board.

[@LSGC_]

thx bro

[@jonathonclaro]

No problem!