How to get free packaging for shipping your vinyl records, CDs and other stuff

The best packaging for vinyl records or anything you need to ship which is flat.
My Facebook Group
/ 1091606277550281
Check out my records for sale at:
www.vinted.co.uk/member/66644967

[@user-jr7ne1dm6b]

Now this is the type of content I signed up for on youtube.

[@gilmeacham8109]

One of life's coincidences, heh? The album is "The Smiths" and the paper you use to protect the table has a headline "Smiths so proud to win another silver" lol

[@Itsnotanymore-ku7dz]

Shit, I myself am a Smiths fan and the single this guy was holding is one of my most favorite songs from this band

[@Kabinet-Of-Kuriosities]

Awesome! Thanks Vinylnuts!!! You just saved me A LOT of $

[@jeremysuleski]

Great mailers. Nice and simple and super effective. You just saved me a heap of work and money. Thank you.

[@lincbond442]

This is great! I usually recycle record mailers that were sent to me but this will be my go-to when no boxes are available.

[@bamagolds]

Thank you. I wished I'd found this video before I mailed 10 LP's. I doubled bubble wrapped then placed in between two 15" cardboard pieces then taped together. Your way is much neater and I like free/cheap ideas :)

[@innergoof19]

The local appliances store has large sheets of cardboard from dryers, washers, refrigerators, etc. Ask nicely and don't leave a mess behind!

[@Oreo321_]

Thank you so much for this!

[@horsey604]

Very clever way, thanks a lot!

[@ezmiuq]

Great help, thanks!

[@davidwhocares3293]

AWESOME TIP, !! Thanx !!

[@aleithiatoews6452]

Wish I could give this more than one thumbs up. Great video!

[@syncdestroyer]

5 people paid money for cardboard. LOL. Great video! Getting ready to ship a bunch of self released 7" records and this video will save me quite a bit of cash. Thanks!

[@jdrecords]

This method should be enough been using it for 30 years

[@wouterhommel8712]

Thank you for your superb video!

[@CovidConQuitTheCensorship]

Excellent. Thank you! 👌👍

[@DerekHundik]

good quick packaging

[@zack157]

well done, mate!!

[@timemachineeddie1146]

Excellent!

[@kennethparker1347]

100 likes!!!! You just saved me a TON of money!!! Thank you, thank you, thank you!!!

[@HighGrade592]

Not just a brilliant idea A DAM BRILLIANT IDEA thanks

[@TatPeddler]

thanks for the great video

[@brendalittle5396]

Helpful video, thank you.

[@jdrecords]

Thanks

[@robertphillips2297]

best video EVER! thanks man

[@jdrecords]

Glad it helped!

[@hupje]

The best and cheapest way to send a record. I'm using this myself for over 20 years. The cross direction of the multi-layered corrugated board makes it stiff. What I do differently is to make the outer layer bigger than the inside. Thus creating a buffer at the corners.

[@sirpattrick14]

How do you get the inner part to not move, wouldn’t it bounce back and forth?

[@hupje]

@@sirpattrick14 I mostly send LP's. What I do is to bend the corrugated board very tightly around the edges of the record and tape the first layer very tightly in all directions. The record will nog bounce back and forth. And when sending a sealed record I put a small piece of corrugated board in the middle of the record, and tape it tightly Due to the pressure of the small piece of board the record will not slide in the sleeve, thus avoiding a seam split.

[@Shelacy]

Great video...thank you!

[@jdrecords]

Thanks

[@cynthiamcinvale1986]

Thank you so much!

[@jdrecords]

You're welcome!

[@petergomez8362]

great video thanks for doing it.

[@jdrecords]

No problem 👍

[@crazydog8287]

Genius!!

[@pompeyo7]

Great advice thank you

[@jdrecords]

You are so welcome!

[@pompeyo7]

@@jdrecords Have a great 2022

[@tuneinat]

Awesome vid..thanks

[@jdrecords]

No problem 👍

[@THE1668KID]

thank you!!

[@jdrecords]

You're welcome!

[@firstboyonthemoon8876]

Great clip, mate. I use this system to mail out many promo records every week. I think the dimension for the single in centimeter should be 19cm , not 9cm?

[@jdrecords]

Yes mate I'm and inch man so I did not take much notice. lol

[@VinylPro]

CONGENIALLY !!!!

[@gazfearon4629]

do you think bubble wrap would still be necessary to protect a cd jewel case, or should this method be enough?

[@koendevroede2244]

Awesome, thx. ! (Just one remark : 7,5" = 19 cm !)

[@jdrecords]

Yes I know lol.

[@taketheexit7581]

Thanks so much. These are EPIC

[@jdrecords]

Glad you like them!

[@IrisMG]

Very useful! Thank you! I don't know what a crisp box is but I think I can find scrap corrugated cardboard

[@johndavis48076]

Potato chips.

[@MrFordnats]

I find many sleeves are subtly different sizes - discobags, LP cover etc. easier to use the sleeve itself as the template. If you're doing a large multiple orders you really need to have the set together sat on the board to mark off the height anyway. I use a spirit level edge to set the crease rather that scissors. ;)

[@jdrecords]

I've been making them for about 25 years not and had much trouble with different sizes, I can make up 200 of these and forget about making up boxes till I get the odd one which is more then 5 items of a odd size.

[@MrFordnats]

Different strokes I guess. I like to make mine bespoke per order. Probably been at it nigh-on ten years myself. similar idea with CDs too. I always delete the overlap on my loops of board too.. ;)

[@peoplessound3335]

thanks for the tut , but on your singles template says 9cm or 7 and a half inches, that's 19 cm, not 9... anyway thanks

[@peoplessound3335]

thanks Sleeves and cardboard are so expensive and I have thousands of records for sale

[@swansong007]

Very clever

[@analog_kid1352]

Hi Vinylnuts, are wine boxes suitable for this?

[@jdrecords]

It's up to you, if it works for you give it ago.

[@Victoria-nh9sp]

Pizza box is what i use

[@jdrecords]

You most eat a lot of Pizzas.

[@fredcdobbs823]

Don't see where you got the scoring dimensions from or where you first measured them

[@nursemain3174]

I wish Marilyn Manson vinyls weren't so expensive

[@jamisonholly9482]

Lol So Random and true!!!