HOW TO GET ON STREET OUTLAWS

I start the story here of how I ended up racing coast to coast this past year ..
Brake issues won’t leave me alone tho and we’re struggling to make the next race
www.jimmydaleracing.com because it takes a village to build a hotrod
[e-mail]
www.nitrousexpress.com - code - Magic
#dragrace #nitrousexpress #lsswap #jimmydale #texas #foxbody

[@theblackfire5948]

It’s the rubber lines to the caliper .. I’ve had that same thing happen to me quite a few times . The rubber line collapses on its self and won’t let the break fluid back out of caliber. The first time this happened to me my lines weren’t that old . I had a ole boy tell me it was the line . I was like F - - k no way .. yeah way brother .. anyway good luck .

[@daviddaniel144]

This is very true ive had it to happy on a older car,you can push fluid by but it want return

[@mraycgz]

Gotta be.

[@NoPrepFans]

Was thinking that or if it’s a old steel line might have some trash in the line

[@StLMikie]

Do you think it would have righted itself once he pulled the bleeder though? Or even when he pulled the line completely it should have released right?

[@5150streetsoklahoma]

I think he has extended braided steel lines for the extra front end travel but the liner inside some of those hoses can still do the same thing your talking about with rubber lines definitely a good idea to check those out

[@stephenbonshire5678]

I stumbled on to u from the old man's garage, and not disappointed!!!! Great way to start the day my man!!🤙🇺🇸🙏

[@juddmuterspaw4081]

Brake hoses do collapse but the chances of both doing it at the exact same time is slim. I’d check proportioning valve but I think it’s more likely your master cylinder is hanging up. Get the brakes good and stuck and see if they release when you crack the line to the front at the master cylinder. I had something similar one time after I changed a master cylinder....it ended being the rod coming out of MC on new one was a little longer than the old one. Took me a minute to figure that one out. Good luck Bro.

[@captainwhiplash]

You’d think huh? Worked one 20+ years ago and both lines were factory and they weren’t equally shitty but amazingly not that difficult. The more I bled them the worse they got. The pieces of broken down rubber would move and clog both ways at times. Had to change both lines to calipers and flush the front brake system and voile

[@RealSteelStreet]

As soon as he loosened the bleeders (but especially once removing the lines) that 100% proved it’s NOT a brake line or master cylinder issue. Ya know, being that they were completely disconnected at that point👌🏼

[@RedEyedPatriot]

Seeing YellowBelly clips makes me miss one of my favorite channels. Rest in Peace Lookout Racing 🕊🏁🤘

[@BA-xw8nw]

Lookout lookout!!!!

[@RedEyedPatriot]

@@BA-xw8nw 😎🏁🤘

[@simoncabron4915]

Lookout Lookout

[@uncleremis69]

Have you considered the proportioning valve? It might not be allowing fluid to leave the front. Cheap fairly easy fix if it’s not a rusted mess

[@87mustang87]

Agreed

[@shitbox82]

Man I dig your channel, average people racing real world cars, it gets old watching everyone have unlimited money for whatever reason and just race for a living, it’s nice to hear someone say they can’t afford something for a change, that’s way more relatable for me! 😄 Don’t change a thing, keep doing what you’re doing! 😎👍🏻

[@trentlinder3806]

If you cracked the bleeders and they are still locked up it’s the seals around the pistons. Over time they swell up and start sticking the pistons. I didn’t see you replace them in the video, only clean the pistons and the caliper.

[@BENCHSEATRACIN]

Pull the brake hoses off the car and see if you can blow thru them,they might be collapsed. I’ve had them go bad and work like a one way valve… pressure goes in but won’t release

[@joejizel5979]

This is a comment to my own comment, I heard him say a loosened the bleeder and that didn’t help which would mean it’s not the brake hoses or the master cylinder. However the video never shows this so think the first step would be to make sure you opened the bleeder. If it’s still tight with the bleeder loose that leaves the caliper pistons, the retaining/guide pin or the pads themselves. If the backing plate on the pads is bent just a little at the top where the pins go through, from pushing in with a pry bar or getting caught up on a worn spot on the pin and then pressing the brakes, they will bind up instead of sliding freely on the pin. Bent pads or not, a worn spot on the retaining/guide pins will not let the pads release once it gets into the worn spot. Last is the caliper piston getting stuck from corrosion, a nick or bad spot on piston or in piston bore, or just wear letting the piston rock in its bore or come out to far of the bore causing it to get stuck in a certain spot. Think you should check if it’s the inboard pad, outboard pad or both that’s stuck.

[@victormackenzie-davis2711]

"RESIDUAL CHECK VALVE" there is one in a stock master cylinder that is hung up, in our race stuff we use an inline anywhere from .5lbs to 1.5lbs

[@MsMoose1979]

Loved the schnoz caption! Plastic surgery is amazing because that can’t be natural🤣. Your girl has an amazing smile!

[@kimberlyhightower3811]

Awesome story brother! Love your content, Thanks for being real 🤘.

[@oliveracing2671]

Aerospace is your first problem, strange tbm or Wilwood content is awesome, wish my ass from Florida could make it to the Gut

[@sinistermutt7006]

Check the brake rod from the pedal to the master cylinder make sure it's not pressing on the master cylinder had this issue last year

[@Peteblz1]

You absolutely crack me up jimmy dale. Keep it coming!

[@brianmcadow4054]

Your Brake Issues = Chinese Spy Balloons , Cant argue the timing here

[@db7069]

Master Cylinder or proportioning valve, When it is both sides generally it is not a caliper rebuild issue (but it doesnt hurt).

[@roughinitwithrowdy8972]

65 Chevelle would drive the car and the front brakes would progressively get worse as the fluid got hotter. Ended up being the master cylinder wasn't letting the fluid come back after I would pressure caliper

[@rodneyf.9595]

Thanks for the video brother, as a shop owner I have a lot of respect. Wish their were people was guys around here who are as interested in racing like I am . We will just keep on keeping on Keep a thrashing 👍 Oh yes lines or proportion valve another thing it's in the line lock just a thought

[@2jzfox...]

Uncle Bucko slides right in. Had me laughing

[@joejizel5979]

Watched it again, are the threads on that pin catching the brake pad so that it can’t slide back? Never seen a pin with exposed threads were the pad rides. Usually all smooth with a e-clip or cotter pin not a thread bolt and nut. Think it’s called a bridge bolt or pin. Either way check into that, looks very sus. Pause the video and zoom in at 7:04. See the bolt and threads with all the grease. Should not see threads, they don’t let pads slide. Look up and bridge bolts.

[@joshuahamilton6217]

I'm just a broke Michigan boy with the race car on jack stands. But I've watched the old man and his boy's channels for years now and when the old man always talked about just getting done talking with JIMMY DALE Now there is a face for the name love your channel so far love the content keep it up it's awesome anywho SMALL BLOCK CHEVY TO THE FRONT. Well that's what I say in the garage to myself with the car on jack stands LMAO

[@5150streetsoklahoma]

I would be checking the prop valve and the brake lines that come from the coupling on the Frame to the caliper.im sure they are extended braided lines because your front end travel is insane!!! Good luck with it man it's a cool story on how everything came together for you and I hope I can do the same thing one day with my channel and my el camino I have.

[@RaceRedFairmont]

I agree 👍 I had a prop valve on my fairmont causing the same issue

[@susanhill750]

I seen Unkle Bucks on ur TV Jimmy Dale. U a good dude bro.

[@flatlanderoutdoors2549]

Just placed a pre order for a shirt, now gitcha some new brake lines 🤙🏻

[@davidvonanderseck8649]

Man Jimmy I love the story about Magic she sounds killer. Don't know why your brakes are locked up

[@NPEOutlawsStreetStrip]

you make the best vids Jimmy shared it to my bigger group Street Outlaw Nation trying to get you some likes and share and even asking them to help with merch good luck

[@JimmyDaleRacing]

Thanks man

[@cliffheard1970]

Her look, comment and Uncle Bucko's look @ 0:54 was perfect timing!!!

[@jeffvanlue4872]

TBM. The Lookout hoodie was sweet to rep! Your the man jimmy keep the girl happy!!!!!

[@rzmod4766]

glad i found this channell, i wish the shipping to canada wasnt so far out ,i need me one of those little wings!

[@JimmyDaleRacing]

We ship to canada now !

[@matt.100]

Uncle Jimmy dale, entertaining dude. Fan from Australia... keep the humour coming

[@pauldhiman8369]

Jimmy Dale is one hilarious dude…. How can ya not like him🤣👍🏽

[@rockycormier3739]

I see good things for ur channel jimmy dale u and ur better half are damn entertaining, keep up the great content!!

[@uncleremis69]

You need to get a hold of Lucore automotive and have them apply their secret anti drag brake service

[@carlbrockway2408]

YES it's the rubber lines going to caliper they collapse and won't release replace them and u will be good to go Mr Dale

[@markthegunplumber8376]

Replace the hoses. sometimes when they get old the hoses get bad and only allow pressure to go one way. had to do this on my OBS chevy after i had the same problem.

[@bigdave772]

vids are great man keep it up . i love the random footage from old lookout vids ! love how you always reppin a lookout hoody too , much respect , 1tft1t

[@TxHammer757]

Could be the lines to the calipers or possible bad master cylinder not returning back

[@billlevassiur8274]

Great video. You crack me up. Race fast - stay safe

[@marylapinski9216]

Texas super star!!! Hahaha!!! Love the content !!! Keeps thrashin!!!! N banging dose gears!!!!!

[@clinth5948]

Check master cylinder push rod length, if the push rod is correct, it's either brake hoses or bad master cylinder.

[@captainwhiplash]

Jimmy I worked on one about 20 years ago and the inside of the bake lines the layers broke down and it would stop the car but it would release them because the brake fluid had ate 😊up the hose on the inside the hose still looks good on the outside and the inside I was collapsing and causing a call I got a clogged up check brake lines going directly from the frame to the caliper

[@jamesnorsworthy4083]

check the master cylinder rod in the back to see if its holding

[@RealSteelStreet]

I’m not even sure why these days, but I’m still amazed at ALL these damn “brake hoses collapsed” “master cylinder bad” “proportioning valve junk” “line-lock problem “ and “rod too long” (that’s what she said) comments. Jesus Christ 🤦🏻‍♂️ Did ANYone actually watch the video before commenting 🤔 And, for those of you who did…congrats, you officially have ZERO gotdamn common sense👌🏼 The bleeders being backed out (and not to even mention the hoses being completely removed) literally makes it a 1000% chance of proba-mf-bility that the ONE & ONLY place the issue can be is in the calipers themselves 🤯 I see what you did there Jimmy Dale, you just knew the ummm “do it for Dale” crew would come right on outta the woodworks just to explain to you exactly what your issue is 😉 Comments galore 🙌🏼 Well played sir, well played 🙇🏻

[@mike4fo]

Here from old man’s garage this channel is 🔥

[@JimmyDaleRacing]

Glad it’s hitting the spot fam

[@michaela.norrissr.6510]

Only other thought, Caliper piston I.D. bores are worn out of round/specs and caliper pistons go sideways and hang up in a similar ways as did the old ford phenolic piston style calipers...

[@troymyers5181]

I enjoyed the video. Jimmy, you're a solid dude. Just earned yourself another subscriber. Good luck with your Mustang- she looks fast as hell.

[@haffrods7055]

Maybe pushrod on back of master cylinder too tight???? After seeing the fried potatoes, I'm going to cook some up. Damn it Jimmy, I watch for the race cars not to get hungry. Lol

[@johngoodman7160]

My experience is yes alot of heat treated aluminum gets distorted 😂😂

[@jimpin6655]

Doc did not like the wop wop at end.🤣😎😎🤣

[@JimmyDaleRacing]

No wop wopped him right into his feelings

[@Landonu22]

Glad I subscribed killin the content keep it up bro 🤟🏼🤟🏼🤟🏼

[@blgish4458]

Jimmy great show

[@marcuskaiser1730]

Stock brakes if it's good enough for Marcus Kaiser it's good enough for u 🤣 good luck Sir I enjoy the content

[@SmallBlockBandits]

Good vibes you got my subscription. Hope to make it to your event in march.

[@ricksoutdoors29]

Def the line collapsing inside ran into this several times

[@ronniecole6054]

Lol, she was just jiggling her ass @ 8:32. I guess tell her thank you! lol🤣😂

[@riselocal]

Strange brakes ftw. That's what I got on my WS6 buddy. Brand new and I just got the rust off of them lol. - Mike

[@AJKlos]

BIG BALLS….small tires Jimmy Dale Racing I’d buy that t-shirt

[@BB-rn6so]

So, There I was. Running down the track. Yup, I was spraying all four kits. I had put several lengths on the Ole Man. Almost to the finish line. Then, Jimmy Dale though I'm going to light my break lights for the Ole Man. That's when it happened. Brakes started grabbing, Jimmy Dale thought, Oh Shit I'm going to crash Magic and about that time, the Ole Man came by me like a jet. Took the finish line right out of Jimmy Dale's hand. I gotta get the brakes working.

[@jamesbrown9619]

Check your rubber lines the liner inside might be letting fluid in but clasping and not letting it back out

[@JustAGuy781]

If you can, change out the calipers and the rubber brake lines or at the very least the rubber brake lines. Might wanna check out the proportioning valve as well. There was no fluid to the front at all so I would say the proportioning valve.

[@randallsavage3795]

Jim Croce... u got excellent choice in music.

[@Godsy_Garage]

Lol gotta have a shop chicken Tom ! 😂 I actually have the same thing happening to my Willwoods up front but still nuthin :/ After talk to everyone and trying everything lol I think it’s actually an issue with the master cylinder, check your rubber lines too , one could be swole shut bro

[@joejizel5979]

And before I forget also check pad backing plate for bends

[@DownWithit]

Bad ass video bro💯

[@IJusWannaKnowWhy]

Check your proportioning valve. Or the brake lines. It's one or the other.

[@johnkorotki7861]

My guess is the proportioning valve. I've had issues with hoses in the past on brakes and fuel as well. Odds are that both sides wouldn't stay locked at the exact same time but it is a cheap and easy fix to change out the hoses. Are the rears staying locked? What's your email? We're looking for a NX tank and bottle heater for our bracket car. We're running a NX plate. Maybe you can help us out. Thank you, good luck, and stay safe!

[@byrneout923]

Lack of Maintenance on those breaks. Videos keep getting better and better, keep it up!

[@adamrussell3260]

Your the best Jimmy Dale!!!!!

[@IDRIVEOLDCARS]

Good job Tom keep it up keep it coming

[@nicksimeone8933]

Loosen the two knots on the master cylinder and pull it away and see if the brake release if they do the brake rod is bent for the master cylinder is bad

[@richardsmith-qy6vl]

Make sure the rubber hose going to the caliber isn't collapsed

[@kellyhalcomb4077]

I second the rubber brake lines, change them out

[@jesseduncan6154]

much love CCHECK YOURR BRAKES

[@joejizel5979]

Stop it with the ASE shit. Why would anything hold pressure with a direct hole in the pressure bore?(bleeder) it’s not pressure related and everything you listed sounds ludicrous. Read the comments and think about what you did.

[@brucerichardson5647]

It's the flex lines that go to the wheels.

[@joshmeyer5280]

Master Cylinder pushrod not adjusted right, not letting it release all the way would be my guess

[@dannypitts2442]

Rubber line collapsing inside or proportional valve could also be brake light switch has screwed itself in to far holding pedal on had that happen once on daughters car

[@rontofflemire6165]

That's right new rubber flex lines needed

[@joejizel5979]

And why would the bleeder not release the pressure?

[@leewedding1807]

open the bleeders and push the piston back in with the bleeder open if it goes in you need brake hoses if that doesn't do it the master cylinder is bador the rod is too tight and putting pressure on the front pads

[@johnherrmann6879]

Shit can those aerospace calipers...problem solved. Its not rubber lines if u crack bleeders and no release

[@clintondavid525]

I'm lovin this channel my dude!

[@DantheMan42099]

Seems like a Collapsed line or something up with the booster.

[@jcnpresser]

Did y’all put new o-rings in the caliper? They got to be square cut rings. Seen all the comments about the lines but you had the lines off and it was still doing it, so I don’t think that’s it.

[@lukelikens2057]

This dude is funny as hell 🤣🤣

[@RustyWells2]

The only thing I can think of is something is in the fluid and contaminated the insides of the brake caliper You could try flushing them with something and pressurizing them and see if you can blow it out and see if they work properly hell put some PSI to them things Jimmy Dale! That's the only thing that I can think of that could be wrong hell you've already tried everything else!

[@Christoph_NTX]

The Magic Show!!! #SmallTireGangstas

[@patricklinde6647]

Your a pretty cool cat. Jimmy. Love your channel above your attitude. Like u said fuck brakes use the parachute...oneof my best channels besides ur buddy's SRC.AND OLD MANS GARAGE. GOOD LUCK

[@jasonriggs4854]

Replace the passenger side line or both just to be sure cause that seems to be your problem I’ve had the same shit happen on my 92 Camaro

[@KimiWallrus]

@8:37; Sometimes you gotta shake it for those big dollar racecar parts.

[@FrankJones-ne2qo]

Check for kinks in the line's rubber line's liner gone bad you mixed dot3 dot4 dot5

[@joejizel5979]

Did the guys that took the caliper pistons out check the brake pad retaining pin for worn spots the pad can catch on?

[@Stinky_G04t]

I wish Loyd still racin, now we just fly rc planes together and race rc boats! Lol

[@KE8OMK]

Keeping it real.Good stuff

[@Harmons1981icloud]

@jimmy dale motion race works has some good brakes Cleetus McFarland is part owner of company his cars use lot there parts😊

[@MrBReal-xc7qm]

is that true? if he's part owner I'm done using them.

[@BradMalpass1]

Dammit Boy them brakes are fucked. Cap the fronts…run the rears.. and throw the laundry 😂

[@joshbartell1653]

Used.5 brake fluid. It doesn't break down and higher temperature

[@Suspension_Shaun]

My guess rubber line collapse not letting pressure back. Or smashed metal line under k member or something.

[@James-in4fo]

It's the rubber lines they are coming apart on the inside

[@chevelle-pi1bn]

Either a bad line lock if it has line lock, or the proportion valve is bad .

[@justingilkerson7885]

Advance auto store, or O’Reillys or AutoZone. I got the the regular shit they got the bronze shirts and then they got the platinum and gold shirts. It’s good enough for Jimmy. It’s good enough for you.