How to get perfect close marks and how to shoot long distance as well as build a long distance tape

[@jamesjgill]

Again, this is the distillation of years and years of experience at the championship level. Thanks for sharing your knowledge.

[@PaigePearceinsight]

Any time! I’m more than happy to help! Thank you!

[@nunyabidness9578]

This is very helpful as I set my teenage daughter for field with low poundage and short draw length. Thanks Paige!

[@johnwebb7882]

So glad to see you posting new videos. Your knowledge is priceless.

[@PaigePearceinsight]

Thank you so much! I am really going to try and put more stuff on here!

[@Njjb122]

That is an awesome way to do that!..I would do.the same thing but I would adjust my shot in marks by a few clicks each way until my short yardage was spot on...this way definitely sounds like its more accurate I dont shoot well enough to see a few click difference on my 30 and 60 marks but im definitely going to try this

[@stevenrupp9190]

Wow! I tried the short mark part of this video. Last night we shot spots at our league night. There were 20 targets at less than 20 yards. Following your process, I shot a 434 out of 440 (a personal best!). The 6 that I missed were on me, not on your process! Haven't had a chance to try your long range process yet, but I will. Thanks so much for your pro tips. I am a very satisfied and grateful senior amateur!!

[@PaigePearceinsight]

Awww that’s awesome I’m really glad to hear that it helped you!!!

[@danyoder2988]

Awesome explanation

[@stevie9361]

Check out precision cut archery. Excellent sight tapes!

[@jerryweatherman7468]

Loved that look on your face

[@brianlew9559]

Does this mean that Archers Mark's algorithm is wrong? It should be accurate in the whole range of marks, otherwise... well it's not? With all of the data it collects shouldn't it work? Honest question, very confused.

[@feelsgooddoit]

Yeah wtf

[@TheDbcobra]

Hi page appreciate all the videos you put out they are great .. They are very educational videos... Gotta question are you shooting the Ibo worlds in Berkeley Springs West Virginia this year Gotta question are you shooting the Ibo worlds in Berkeley Springs West Virginia this year.. Good luck at the rest of your tournaments this year

[@PaigePearceinsight]

Hey! I’m not I don’t shoot anything IBO. I don’t shoot unknown, everything I shoot is know. So indoor, world archery, USA archery, NFAA, and even Asa. So I have a full schedule and don’t do anything unknown :)

[@lauranelson2331]

Hey Paige, this is super helpful. Any tips on how to work with a B3 sight? They are a 25 click sight that doesn't come with a fixed scale. Can I use my calibrated scale that I made with archers advantage without a fixed scale?

[@PaigePearceinsight]

Sooo apparently it won’t work at all with B3. They haven’t built their sights to work with all of this stuff. So if you have that you can go print tapes the old school way from archers advantage and print and check till you get the right tape! I’m sorry about that I know it’s inconvenient!

[@Jtrettel]

No words for how dialed in you are! I would like your thoughts on what I do to edit my close marks. Once I set my 20 and 50, I use the edit function to get my close marks. Typically I can do a 10 yard edit and I 5 yard edit and everything under 20 seems good. Is there a reason that method is less accurate?

[@PaigePearceinsight]

No you can do that… but if you change your main marks it usually clears out all your different edits. So this way if I want to change my 80 mark by 2 clicks I can change that and not loose all the extra edits I have stuck into the system :)

[@larsonchaco8782]

Hello Paige.... Does this also work on a five pin sight? Or just the single pin sight?

[@PaigePearceinsight]

The archers mark is for a single pin. But I use archers advantage to print a tap that matches my 6 pin hunting sight and my 70 pin becomes a floater so if I roll my sight down I always use my 70 pin as that floater and my tape World from there! That tape can’t come from archers mark so use archers advantage for something like that!

[@ВладимирПрименко-о5б]

I have 4 pins on the sight of 10, 30, 50 and 60m have not tried to shoot from 6 meters, I only know that from 1 meter you need to aim at 30m pin. With 6m it is possible as with 20m.

[@ludodg]

Hello. I wonder if there is a reason why you use Archer's Mark over Archers advantage ? (or did I miss something?)

[@PaigePearceinsight]

I use archers advantage if I want to print a tape. But because archers mark is an app it’s super convenient to have with you at all times. I can make quick easy adjustments and I don’t need phone service to do it. You can print the same type mark sheet of AA too. But I do tapes from AA and mark card from archers mark

[@ludodg]

@@PaigePearceinsight thank you :)

[@allywilkeforsenate]

Archers Mark never works for me.I just shoot them in on paper.They quit making my cam lubrication and it changed my impact at 60 yards by 6 inches.I went from a bow specific lubrication to a non archery specific lubrication and picked up speed.Archers Mark keeps yelling at me that I am out of their tolerance and I can’t adjust anything.Paper don’t do me that wrong.

[@isaiah3898]

Can you do one about how you set up and tune your hunting bows

[@PaigePearceinsight]

Yes I want to do a video on that for sure!!

[@isaiah3898]

@@PaigePearceinsight I’d sure like to see how you do it. Thanks Paige

[@PaigePearceinsight]

@@isaiah3898 every time I set one up I’m always like okay I’m filming a video! But it’s usually like the day before season opens and it’s a cluster trying to get them broadhead tuned and sighted in for me, so then I run out of time and it never happens 🤣 I struggle a little with pins when I’m used to an 8x lens then go to no lens the animals/ target looks small and the pins look giant. So it takes me a bit to get used to seeing stuff differently! But I need to just film that one day just to film it, not try when I’m actually trying to do it in a hurry! Lol

[@isaiah3898]

@@PaigePearceinsight I get it I just wanted to know how you do it

[@darkwandervids6717]

What do you do if the sight that you have is not in the program to select from the drop down list?

[@PaigePearceinsight]

What sight are you running? Most of them work but apparently the B3 doesn’t

[@darkwandervids6717]

CBE HYBRID ENGAGE. I started using archers advantage instead of archers mark. Didn’t know to enter my sight as “inches” in the program. I was able to kinda get it dialed in for tac seven springs but still slightly off. Thank you for your videos and great information

[@floydallen9885]

Aaah, what did you say 😳. Paige, you're my idle. 😊

[@allywilkeforsenate]

Archers Mark does not work with CBE sights that own.

[@BlueWidow2010]

Yha, what she said....