How to Get Stunning 3D Sublimation on Tumblers & Mugs!

[@JustMightDIY]

*Save More at Johnson Plastics Plus with Our 2024 Code!* Our JPPlus discount is now bigger & better! Go to: link.justmightdiy.com/JPP and use JustMightDIY15 for 15% off list price. (Valid through 2024 for unlimited usage. Excludes equipment, ink, fabrication & STB subscriptions.)

[@piotrjanczewski863]

Fajnie wytłumaczone, niesamowite, bardzo pozytywni prowadzący~! Pozdrowionka z Polski~!

[@JustMightDIY]

Thank you! I think you're our first comment from Poland! Cheers

[@sandracnix]

Very good tutorial, thank you

[@JustMightDIY]

Thank you!

[@zizimcreations]

Amazing! We have those blanks too! Love your works!🥰

[@JustMightDIY]

Sweet

[@farahgeorrah1723]

... simply beautiful 🎉

[@JustMightDIY]

Thank you! 😊

[@melodylz2667]

beautiful job. Where did you get the tape dispenser?

[@JustMightDIY]

Hello and thank you!! That was probably a random TJ Maxx find or something!

[@dhey007]

When I have done hot peels on plain mugs they don’t all get transferred. When left to peel until completely cooled, they look great.

[@JustMightDIY]

Whenever we tried to wait for the cold peel, something went wrong like ghosting. When you find what works best for you, stuck with it 😆

[@wademorales-p2u]

Is there a general amount of space that you leave from the handle of the mug to the edge of the image? I recently purchased an auto press and want to avoid the faded edges where it might not get enough heat. thank you

[@JustMightDIY]

We can get up to about half an inch from the handle, but we do it in two presses. Spinning it as far in each direction as it will go. Hope this helps😀

[@bashrmohamed7255]

Really fantastic 👌 From India

[@JustMightDIY]

Thank you! From us ❤️

[@susanschmitz5871]

Ok, so I am a full time designer, and just so you know, you need those lights and dark areas and shadows/contrast to have that 3D effect your so in love with. That edge that bothered you is a cast shadow adding to the “illusion” of the 3D appearance of a flat image. You could tear the edges, by hand, deckle style and probably get a more artistic edge that wouldn’t be distracting or offensive. Hate to pass up such lovely designs because of a shaded area.

[@JustMightDIY]

We appreciate the perspective. As we mentioned, it's all a matter of personal preference. We don't like a harsh seam and found several beautiful 3D designs that give us the 3D effect without the distraction of a noticeable seam. Some of those other designs would be BEAUTIFUL on flat surfaces, and we'll be using some for in the near future for those kinds of projects for sure!

[@HandyBear]

Looks really interesting

[@JustMightDIY]

Thanks!

[@jackyfer.595]

Beautiful. Thanks ❤. I will try 😃

[@JustMightDIY]

Great! ❤️

[@jmoss55ish]

Wonderful job you two!

[@JustMightDIY]

Thanks so much!

[@Ferkigamers07]

Hello, what quality should the image have since I made some, they were beautiful but the 3d effect was not appreciated?

[@JustMightDIY]

Hey! We always use high quality images.

[@annacoronado1338]

Very Nice!!!

[@JustMightDIY]

Thank you!!

[@pamtilsonrodgers2825]

So pretty!

[@JustMightDIY]

Thank you! We're obsessed with these designs. 😍

[@JawedIqbal-c7j]

NICE

[@JustMightDIY]

🤗

[@aleynaakbas-o6q]

hi i have a question.What should i use the size this design on midjouney(for coffee mugs)?

[@JustMightDIY]

Hello! We’re not familiar with midjourney. Happy crafting!

[@Nailcoverlover]

New subbie. Yay Tfs my new friends. I enjoyed 😊

[@JustMightDIY]

Oh yay! Thanks so much. 😄

[@keliwoodall9710]

beautiful job and excellent descriptions and explanations however you should consider maybe possibly actually making one that has ghosting and harsh seams all together in one video PLEASE

[@Wrightn221]

They're pretty. I've sublimated on mousepads with 3D files, and they are the talk of Jennifer's Sublimation group. I am going to try the mugs when I get a convection oven. I am not getting a press.

[@JustMightDIY]

Hey there and thanks for watching! We definitely want to do some of these on flat surfaces - the designs are just too pretty! We have some great tips for sublimating in a convection oven: kzbin.info/www/bejne/f6m7goFuoa5oqtE

[@Wrightn221]

@@JustMightDIY hi, you're welcome and thanks for the tutorials. I don't know what I would do without you kind people. I tell people that KZbin University is the Best. 😂 I would be reading instead as I do at times. Reading is great for the brain. In the early 2000s, I taught myself how to build a webpage by reading.

[@kushyisrael1652]

How successful have you two been with the mugs & tumblers??

[@JustMightDIY]

Hey! We don’t sell our creations. Thanks for watching!

[@rosanneheller6584]

This newest craze is so beautiful. I have made a few and think they are so pretty. I do wonder why they seem to pop more in the pictures than they do in person. Any idea what I mean and is there a trick to it?

[@JustMightDIY]

We LOVE these kinds of designs!! Thanks so much for watching. No idea on the trick question, though!

[@rosanneheller6584]

@@JustMightDIY Thank you for your reply. It is mind boggling. LOL. But the designs are beautiful

[@JustMightDIY]

For sure!

[@nappycampers4761]

How much do you sell your tumblers and mugs?

[@JustMightDIY]

Hey! We don’t sell items. Thanks for watching!

[@mongmm.]

What is ppi

[@JustMightDIY]

Hey! We don’t understand your question. Can you try again?

[@edmarkhodayonot]

the thermal tape you put in the mug was an overkill

[@JustMightDIY]

Thanks for watching and for your opinion, but we’ve done a lot of testing and found that this method produces the most consistent results. We’re glad that it sounds like you have a different process that works for you!

[@marklola12]

You are getting ripped off from design bundles its all same as whats on creative fabrica which you can pay 4.99 a month and access to litterally everything

[@JustMightDIY]

We're glad you found a site that works for your needs! We've actually tried Creative Fabrica before and used it exclusively for several months. However, we ended up switching back to DB for most of our needs. The $5 per month is ONLY if you're willing to commit to a full year up front; otherwise, it's $29 per month. We honestly found their search functionality to be really lacking. We've provided that feedback and keep checking to see if it's improved at all. For now, we're sticking with DB for the most part. $5 per month is still challenging if we can't find what we need quickly and easily. But again, cheers to you for liking the experience!

[@Silverstudiobc]

I was just looking at CF . $47 for the year. DB is $10 per month, and you still need to purchase some things that you may want. Am I missing something?

[@nancylove9596]

You need a tape dispenser!

[@JustMightDIY]

Ha! We have one - it’s just made for smaller tape rolls lol. We make it work though! 😉

[@Putifly69]

Ok so its regular tumblers just using a 3D file?

[@JustMightDIY]

Hello and YES! Finding the right 3D file is key, but it goes on a regular sublimation tumbler!