How To Get the MOST From Your Modeler!

[@treyxaviermusic]

If you're saying there's broken audio, then the fix is 1.) stop listening on your phone and 2.) get a new phone that has stereo speakers, you're hearing the stereo recording condensed to mono and it's canceling

[@ha7e777]

Or modelers just fcking sucks!

[@Thanatar2]

Naw man. Using studio monitors (Kali lp-6’s) and the tone was amazing until the end. The cabs sounded very scooped and bass heavy. Edit to clarify: the unit sounds amazing. Until the ending of the video where you show off the different irs. But because each one sounds scooped, it’s probably the amp settings. But I don’t know how you had it set. Great video though. I think the unit is killer

[@JosephLSSimpson]

Stick it into a Seymour Duncan Powerstage and a nice 2x12 🤘

[@cookerama6265]

"Dont watch on your phone".... well I dont bring a laptop into the shitter.... guess I'll just stop watching if that's your attitude mister!!! ;)

[@treyxaviermusic]

@@cookerama6265 I mean if you're watching me on the shitter you might as well look into the toilet instead, it's pretty much the same

[@PariahVSGear]

As someone who's pretty much just interested in the amp sounds...the Gt1000 core really brings it. One of my favorites.

[@apoplexiamusic]

Yup, I’ve just been listening again to a few demos and I think I’m gonna give it a second chance! Maybe I’ll try using it in conjunction with the HX Stomp too!

[@danwillmann9193]

I ran a side by side comparison of the HX Stomp to GT1000Core and I came away with the GT1K. The pick dynamics, feel and touch response are a lot better. However, the software is atrocious to use compared to Line 6. The Line 6 software is easier to use and there's a lot more IR's to get you off and running but the feel and dynamics of the Boss won me over by a lot.

[@kahlrhoam6769]

I’ll agree, that BOSS is doing a better job than most; The least 1 dimensional sounding, least deeply immersive menu black hole & sounds lie they actually had a tester play it for the engineers.

[@stevenboldt6489]

It makes a world of difference to use a real guitar preamp pedal in the effects loop. I have the Kingsley Page, Xotic RC Booster and a Laney. They all sound good. One thing that surprised me is how good the compressor is in the GT-1000 Core.

[@Shred_The_Weapon]

It’s January 2024 as I leave my comment. The 1000 Core is definitely tempting me for my next amp modeling purchase. Since 2018, I’ve been plugging into a different Boss unit, the ME-80. Since I was at the end of my teenage years, my goal has been to approximate the late 70s Boston electric guitar tone. I feel as if I’ve gotten the meat and potatoes of it in a pedal from a Japanese manufacturer called Rancher, the Goat Generator, but i’m not too thrilled with how you lower your volume and hear white noise when trying to make it clean up. What I wouldn’t mind knowing is if the same tone can be generated in a patch on this unit so I wouldn’t need to insert the stomp box into the signal chain. On the ME-80, I had tried calling up the MT to metal zone emulation and dialing back to the game. It mostly worked, but I wasn’t able to control most of the EQ parameters without calling up the editing software which I wasn’t so keen to try doing. I can imagine that if I purchased the Core, there wouldn’t be much getting around using the software for editing.

[@ricopaxton]

Good points and spot on marketing without effort - Boss should pay you extra bling

[@roccanto86]

In Headrush you can also save diferente profiles for diferent input instruments, even you can assign it as a global input or an specific input per preset

[@RedNK]

If I'm not mistaken, these things are present too on both the GT1000 and BOSS Katana

[@roccanto86]

@@RedNK I’m not sure because I had a Headrush a time ago, but I haven’t had any modeler by Boss

[@erikweinhold6812]

Awesome info! I just picked up a gt1000 core myself so this video really helped out.

[@apoplexiamusic]

It’s definitely harder to dial in than the HX Stomp, but it is a lot more powerful. I definitely recommend using your own IRs as it will most likely be easier to craft the tone in your mind

[@maloonatic4039]

hey Aird is my lastname so for me, that is VERY cool! hehe. I'm using GT1000core with my Fender V100 violin ;) I'd worked out all the stuff you mentioned BUT I had not seen how easy all the config was in the SOFTWARE. I have not got round to getting the usb cable and have been tweaking everything by hand...after seeing you modify the chain via software, I am definitely going to be creating/editing that way from now on! Cheers

[@KitchenAppliance]

modelers really are the future

[@kahlrhoam6769]

I give this vid a thumb up. And I REALLY HATE modelers. But, this generation of BOSS GT units, is the best sounding to me. My ears can tell the difference in any scenario, & that difference drives me bonkers. My amplifier OCD.

[@rtroiani]

Love that Kiesel. Just got a Leia and can't put it down!

[@jmcbade2960]

Very useful and specific information. Thank you.

[@DevrimOdabas]

Trey its like you read my mind I recently got a ge200 on sale and I was like "I wish there was a video like this" and there it is

[@treyxaviermusic]

I'm inside your head reading all your thoughts, I know what you did last summer

[@DevrimOdabas]

@@treyxaviermusic fuck

[@MathewCohenProject]

Would be nice to see how the models compare to something like the HXStomp or the Fractal FM3

[@ha7e777]

I think you have lost some audio tracks

[@treyxaviermusic]

I think you're listening in mono

[@MegaTechnoteacher]

Great job! I also have a Mel9 and a GT1000 Core! Thanks for the head start.

[@StratsRUs]

Thank You. I felt odd about my input setting being +14db until you put my mind at ease

[@ricerockit]

My first time hearing the Mel 9, it really has that Metroid vibe like you said!

[@kahlrhoam6769]

9:10; Yes, you can. Mic (post cab) signal> Mix Rig w/ Mel9 effx insert. Can do, w/a small mixer live. It’s not ‘magic’.

[@coreyrramsay8858]

Mate, I use a Pod Go so the routing is out for me but I have honestly never looked at input gain so I'm keen to try it out

[@BrenQ99]

At first, the Rapper Hands were distracting, but then it got funny. Then funnier. While laughing, I realized I hadn’t paid any attention to a word you had said. Thanks for the laugh, though! Too funny!!!

[@edgardoarroyo7418]

for live situation you recommed the core or the full GT-1000 version?

[@TheLordcasio]

Sound Sculpture Switchblade series is the oldsckool way of arranging your stomp boxes in a “matrix” style switching (ie: parallel/series, multiple branches…etc)

[@JeffHendricks]

I actually looked into those years ago, before these modelers came around. Comes with a hefty cost though. Even something like the EHX Tri-mixer or a VFE Klein Bottle will add cost and complexity... and they don't do stereo like the GT's mixers can.

[@TheLordcasio]

@@JeffHendricks I have a Klein Bottle…it’s awesome.

[@JeffHendricks]

@@TheLordcasio I had one, too. Recently sold it because I don't need it... have a GT-1000 Core.

[@TheLordcasio]

@@JeffHendricks I also use a GT1000 core. I keep the Klien Bottle around for studio stuff and weird ideas. The GT1000 has definitely helped in shrinking down my board though.

[@giorgenesgelatti3987]

You had me at "sounds like metroid"

[@JaredGunstonTV]

Well said man 👌

[@Worlds_Worst_Guitarist]

At least with the Headrush Pedals you can also save specific Guitar Input settings!

[@hanovergreen4091]

And set list and song list.

[@tejeguitar]

If I am not wrong you can also have specific guitar input level presets that you can switch betwern within the Boss GT1000.

[@chrizzlerguitaroni1928]

GREAT video! Thank you.

[@dominicgibson9529]

Great vid as usual, lots of really good info. I'm thinking of getting one of these gizmos with a view to using it in 4CM in conjunction with an ES8. I've heard that you can still use the models even in 4CM...how would you have to set that up to do it? I did such a thing with an FM3, but that was through using another FX loop in the amp I had at the time. Thoughts...thanks✌

[@ulfdanielsen6009]

Never really delved into the modeling world,- not adverse to it though,- just never got around to it. One thing I would like would be to conduct or see/listen to A/B comparisons. Comparisons between something like a Mesa V-Twin or Throttle Box EQ, Hughes And Kettner Tube Factor, Blackstar HT-Metal, Engl Powerball or Diezel Herbert,- all tube or FET preamp pedals going into an Engl Cabloader. Know what that would be supposed to sound like,- especially for contemp. extended range or low-tuned metal. How would the amp/cab combinations in the modeler compare? Idea for a comparison video perhaps?

[@chl3224]

There's a tun of those videos on KZbin.

[@danielotterborg]

intresting indeed!. For someone that’s been thinking about venturing into the ”modeler world” for quite sometime now but has like ZERO experience with this kind of things, what would you (right of the bat) recommend??, quad cortex??, helix??, etc. keep up the great work!! Cheers from Sweden🤘

[@ArielEduardoAlba]

DUDE! It's so funny you mentioned Metroid! Super Metroid just turned 27 a few days ago! Ahhh... good times.

[@treyxaviermusic]

I'm in the middle of playing it right now! Best and most unique music in a game, especially for that time period

[@ArielEduardoAlba]

@@treyxaviermusic I started playing it again recently, but I changed computers and I haven't transfered my games yet. But yeah, it's such a good soundtrack! It totally adds to the environment of the game.

[@mauroo33]

I was planing to buy this multi effects, until I saw this video. Tks! 😅

[@godsofsurf]

Nice work.

[@jasonbass3809]

So its like a gate for your input jack !!!

[@harleyosterlund5796]

I’m on day 3 trying to figure out the looper. I have the Fs-5L I was told i was needed. And I’m just trying to set it up so the CTL 1 button starts and ends the loop and the 5L plays the loop or vice versa

[@parallaxgaming5070]

question. how would i know my input level on a boss gt 100 ?

[@kylehowdy]

Parallel processing is for sure one of the coolest things to do in modeling. SO easy, and SO many options!

[@tomislavefremovski1029]

Does the GT-1000 core recognize the guitar input level by himself when you plug a different guitar automatically or you should do it every time when you change guitars? Thank you.

[@JFoy1023]

Short answer no, it doesn't automatically reconize the guitar/appropriate input settings. You can save the input settings for 10 guitars. When you switch guitars you select which setting 1-10 that you have saved for that specific guitar. So you might have your Fender Strat at setting 1 and maybe a Ltd Eclipse with EMG pickups at setting 2. Each time you switch guitars you'll want the appropriate input setting for that guitar. I hope that helps.

[@tomislavefremovski1029]

@@JFoy1023 Well thank you for such detail explanation. I didn’t know for that other option, but is always great to learn something. However, when I check all my guitars thru input setting, I found out that all have very similar input, so did set up just for one and now all they working well. Thanks, one more time.

[@JFoy1023]

@@tomislavefremovski1029 no problem. I imagine if the guitars are similar then there wouldn't be a huge difference for the input settings.

[@jenniferthomson849]

I try one in the shop sound terrible presets were no good I spose good video

[@hodshonf]

Great video - fun and informative long time Roland/Boss user waaaaay back to the GR700 Sounds like the GT-1000 Core finally hits the mark!!! Thanks for all your hard work - one of my fave channels.

[@MegaTechnoteacher]

GR700 fan here too. I go back to the Jet Phaser!

[@dr.cronik0_038]

Would you say that the program and sounds are better than amplitube? Not consider the hardware.

[@jenniferthomson849]

Have boss gt1 Goi send into the return of that amp and klone boost.sounds great. Then I thought I'd up grade and brought a veleton gp200 and no good. I do U really think it's any good. I use a valve multy effects board going threw the clean. I did have test with one of these in the shop but sound terrible maybe factory Presets no good

[@ЧБчел_Музыка]

6:16

[@Kacee2]

One thing I don't like about the gt 1000 is that every setting has drastically different volume levels..

[@jasonbass3809]

boss delay usually use to do it back in the day =) simple lol

[@lizardspit2508]

🤘🏼🔥🤘🏼excellent !

[@pascalchiassonmusique827]

is it just me but i always hear a small crackling noise when your playing guitar?

[@pascalchiassonmusique827]

9:30

[@channeling05]

Would you create a video about modelers for extreme metal tone while incorporating their microphone inputs for extreme metal vocals on the other channel?

[@astery2kb]

Theres no sound with some of your guitar profile

[@TheLordcasio]

"HilAIRDious"

[@AD1978leo]

Audio is fucked up! Just kidding sounds fine on my end. Seriously I listened to the stereo parts and everything is perfect.

[@Dodzee.44]

too hard to get ya head round

[@marceli155]

are you cold ????????????????????

[@Achielezz]

Feels bad, broken audio Edit, just a mono speaker phone, also feels bad

[@treyxaviermusic]

shit where's the audio broken? can you timestamp me

[@vav413]

@@treyxaviermusic example @13:13 Also@10:40 - several places really

[@treyxaviermusic]

uhhh I just listened there and there's audio aplenty, what does it sound like for you? is it actually silent or what?

[@treyxaviermusic]

@@vav413 are you listening on a phone speaker, I wonder if it's canceling going from stereo to mono

[@IndieGameDeveloper]

Audio works fine on my end.

[@workdays8280]

I can advise any one who buy this unit. U will need to enter a computer programer cause. Before U even attempted to use this device.these people on KZbin a car salesman there not honest total liers

[@gregs6424]

The most amazing part of this video is the software that let you overlay the effects block graphics (with transparent background) over the video. Obviously a collaboration with Boss/Roland, perhaps something you should have stated as "Paid promo" in your intro. If not, then who the hell edited your video and made it look like you were moving the effects blocks on the fly, as you were demonstrating? That is talent. Respect to either the software developers, or video editor - or both.

[@gregs6424]

8:50

[@kebbinator]

They just keyed out the background of the Boss Tone Studio software in their video editor, in the same way you would a green screen. It’s pretty basic, you don’t need custom software or custom graphics edited onto the video. KZbinrs are required to mention if a company paid them to sponsor a video. If he didn’t mention it, it’s not sponsored.