How to Get Thick Foam from Your Foam Cannon Every Time!

Wide Mouth Foam Cannon: www.mckillans.com/products/wide-mouth-foam-cannon

[@affanfathullah5877]

This is exactly what people should be doing when they're selling things... Selling should be helping not convincing Hope your business grow

[@laurapalmerTDGE]

Wrong : start with pre-rinsing and a dedicated chemical like Nerta Carnet Jumbo. Followed by a regular soap like Carpro Reset.

[@ChaosBreed93]

I'm more amused by the last statement at the end, "Our foam cannon comes-"

[@GodMaxDrinkerofTea]

The The sus

[@AnthonyMooreIsTerrible]

Can you start listing these products in your descriptions?

[@mckillans]

Yes, It’s been updated

[@Nojail101]

My pressure washer I use water out of a bucket and it runs off 2 20 volt batteries so 40 volts it runs off. So I don’t need to connect to anything. I’m sure there is some thing I can pour in the bucket of water to treat it that will be fine on the pressure washer. I use a craftsman 1500 psi 1.2gpm and I love it. I have cleaned concrete of oil with no chemicals !

[@certifiedalchemist]

Thanks, exactly what I needed. Didn't know what the extra little screw that came with my foam lance was for.

[@10r80Coyote]

I use the rv water filter too! Works great

[@Breese147]

I love the mini plugs set in the video haha best of luck!

[@hamzababar07]

Great content 💯

[@dexterousx92]

*good info !*

[@Dvtchedits]

Our foam cannon comes 💀

[@jordanpatterson2520]

Mine be guzzling and bussin

[@williamjones2636]

Information is power thank you so much for sharing

[@jb.s197]

what water filter do you use to prevent water spots?

[@colorsafebleach5381]

Its an RV water filter for drinking. So it doesn’t work for a true spotless wash. I tried it, and still had lost of water spots.

[@flint1477]

I’d definitely like to know more about the water filter you mentioned.

[@anthonys439]

You need complete distilled water to avoid water spots, these RV filters won't strip all the minerals that cause water spots.

[@SalvadorSTMZ]

Yeah that tiny filter will not prevent water spots.

[@ayaazversi2658]

Link to the small water filter on the spigot please?!

[@bobsbig42]

Which water filter do you use?

[@Noriel.YT20]

After the foam runs out reloading

[@shaunbeasley7690]

Build the gun with a female quick connect. I’m a pressure cleaner and my hose is set up opposite of yours (leading with the male end)

[@jimbaloshi9356]

This comment section 💀

[@meowster6969]

Take 1 got me 😂😂😂😂😂

[@giancarlomoreno9779]

You should make a spinning nozel attachment

[@hectorvaldillez1863]

Does that water deionizer work for you and how often do you use it? Make a video?

[@muffin70507]

Do you know how much longer it will be till the new swivel gun pro comes out?

[@romeovoigt]

Our foam canons co-

[@tamartopuria6907]

Thank you

[@cantucki808]

Can list all the products in this vid and where to buy.from???

[@jamram9924]

Just go to his website

[@gaelcamiloelenes4094]

what water filter is that ???

[@bigchillorio5555]

It's high quality soap for me and same with the little tip tho

[@salman13]

bhai , what type of water filter do you use? link? thanks!

[@wetnwarm3519]

Bro had the power washer off lmao,I get the same foam from the cannon off of Amazon.

[@thefamilyman9628]

Do you get complaints from neighbors when it comes to the suds going down the storm drain in the street?

[@1988pecco]

whats the name of the filter you have connected to your water supply to not have water spots?

[@tashanrodney9684]

I use the same filter

[@jesusHernandez-ed9hi]

How often do you change the filters

[@MikeBee77]

Wait, you said that water filter prevents water spots? I have done some research and ended up with one that has a solid carbon filter inside but some other guy did a test on youtube not showing great results however, not sure the brand he was displaying. The one I have is by Clear 2O, green packaging and Walmart also carries it. Which brand is yours? Awesome video!

[@WhiteLBZ]

I’ve tried multiple RV water filters and they all say don’t use above 60PSI. All my pressure washers are way above that. It’s a little nerve racking when using it because I don’t want it to explode on me.

[@anthonys439]

You're right. You need distilled water to avoid water spots.

[@TriNguyen-qq5ul]

Can you get thick foam with a water garden cannon

[@seemslegit6203]

Where do i get that water filter?

[@DiamondDetailingBuzz]

What brand of water filter is that? Also where can I buy one? I desperately need one for my shop, it’s creating extra work for me

[@anthonys439]

They're RV filters and they won't stop water spots as they don't strip all the minerals that cause water spots just chlorine. You need distilled water for a spotless wash.

[@MhbCustome]

Which filter use for avoid hard water spots

[@Skyzdalimit68]

How many gallons is that filter good for? 20? 30?

[@onesikm3]

What’s the model number of that wand handle mine broke perfect timing

[@shadowfall2011]

Where'd you get the water filter? I used an RV one off Amazon for spots but it was mid.

[@anthonys439]

They're all the same. Only distilled water achieves a spotless wash.

[@derheimaustin7225]

just look up rv water filter and it’s pops right up for those asking

[@derheimaustin7225]

they also last an average of 3 months

[@colorsafebleach5381]

@@derheimaustin7225they may last 3 months for drinking, but not for a spotless wash. They just filter out harmful stuff for drinking. My water still had a PPM of 160 after the filter.

[@Kmrj_gt]

What’s that filter called

[@blkmamba714oof2]

Aye bro whats the filter name?

[@WhiteOak09]

I need stainless connectors

[@bryancordero8761]

So if we buy foam cannon and we have 2.0GPM do we need to change the orifice

[@alfonsoramirez6415]

What water filter is that??

[@ZaneenS]

What he doesn’t tell you is you need a strong enough pressure washer. PSI doesn’t matter as much, anything about 1700 is perfect for car detailing, you don’t need a 3000 PSI pressure washer and I would actually recommend not getting one that high. What you do need is a pressure washer with a high GPM, so 2.0 GPM or more. That’s what will get you the thick suds, any car soap will become thick. You’re welcome

[@captainwin6509]

He literally says the same thing in the video 😂

[@TomPreston-yv5ee]

​@@captainwin6509 for real lmao

[@1thechosenjuan1]

Need 2.0gpm or more to do what exactly? To use foam cannon and get good foam anything 1.3-2.0gpm will work perfectly

[@mayurireddy8196]

Amazing thick foam liquid car washing

[@Vitaliuz]

What are those _"millimeters"_ you're telling us about?

[@andres2011801]

I’m trying to contact you guys and i never have a response in the chat or by emails I want to buy from you guys but is difficult when I don’t have answers to my questions

[@user-tj3rc9gn8b]

What I will need to open a Car wash

[@emanuel0fernandez839]

No way that filter works

[@stev4452]

now, to actually start cleaning; calculate the distance between the 2 largest planets in meters

[@ilusikental9596]

Good day sir, is it possible to get thick foam suds using 1.1mm orifice as you shown but using 100bar/1450psi water pressure jet?

[@Bakedbanana007]

It depends on the gpm of your pressure washer. If it’s 2 or more then you’ll definitely get thick foam

[@geolopez914]

Why warm water???

[@sunshinewestcardetailing]

hello there, i am the owner of a very very small car detailing business call sunshinewest car detailing. i was wondering if you could give me some tips on pricing and Equpment, please & thank you! :)

[@808chickenhuntahz]

Water filter name

[@jamram9924]

I’m sure potential customers are agitated because of those backordered guns. I’ve been waiting to be notified 😏😏

[@LeonUK]

Snow foam isn't supposed to be thick, it's just gradually turned that way as a sales pitch because people love the thick suds 😅

[@davidrobinson4400]

Yeah, too many expecting the snow foam to be like shaving cream on their cars. What you going to do next? Take a Mach 3 razor to the bodywork? Bilt Hamber Auto Foam or Touchless for me. Doesn't produce impressive foam for the 'Gram, but actually removes the dirt from the car as it runs off.

[@LeonUK]

@David Robinson the Bilt hamber range has many amazing top-tier products! Great choice.

[@Bakedbanana007]

You’re totally right I’m addicted to thick suds 😂 I like my low foaming soaps too tho like p&s pearl. I definitely wanna try Bilt hamber in the future when I’m low on stock

[@edgy179]

Oooohhhh warm water

[@RobertMacCready]

Ur water filter, to prevent water spots, is a joke. Lasts about 3 minutes. Test it. It is worthless.

[@adriansosa1698]

“ thick suds “ 🤨

[@archiebalasbas290]

is it okay 1mm orifice with my 70Bar Pressure Washer?

[@johnjkizer6399]

Do you truly never see water spots, seriously

[@kaliguy47]

Stainless is a joke! Do you realky plan to use same unit for 30-60 yrs? There is always something better in a years time. Scam!

[@thewiseguy390]

All the foam is useless and just collects the dirt. You need some what a runny foam to actually strip dirt off

[@carlitosjuarez221]

That's why you pre wash then foam then rinse and foam again.

[@strawberrypls1241]

When you don't know anything about cars 👁👄👁

[@Houndzee]

We also realize that a foam cannon is basically worthless and does not aid in washing. Rinse well, use a 2 bucket method or one bucket with elevated screen and wash. Rinse and repeat as necessary. Foam does nothing to actually clean the paint surface. Nothing.

[@Bakedbanana007]

You should do some research. There are high ph level pre foam soaps that will clean very sufficiently. Ever tried Bilt Hamber? Safest way to prevent scratches is to pre foam the car, let it dwell for about 5 min, rinse, foam again for more lubrication or just jump straight to the bucket method of your choice. I use 1 bucket with multiple mitts. The pre foaming safely drags down the dirt minimizing the chances of scratching.

[@Houndzee]

@@Bakedbanana007 what is the difference between pressure rinsing and foam cannon in terms of scratching? I would argue that pressure washing removes MORE surface dirt than some foam + gravity.

[@Bakedbanana007]

@@Houndzee foaming encapsulates the dirt and lifts it off the paint so when you rinse it off, the dirt doesn’t drag along the paint so harshly. It’s just extra steps to make sure there’s no scratches. A rinseless wash method is also proven to be one of the safest ways and that doesn’t include any foaming or rinsing. There’s many methods that work perfectly if you do them the right way but I think it’s incorrect of you to say that foaming does nothing to clean the car. Just gotta find out yourself Bilt Hamber is ph 13 and will definitely make a difference in cleaning the car

[@juanpimentel7522]

150ml is way too much holy crap 😅

[@Bakedbanana007]

Forreal I use 60 ml and get thick foam just like that

[@hammadmalik111]

Bro your my neighbour 😂

[@hammadmalik111]

Im not joking

[@hammadmalik111]

Keep up the good work

[@axeman33333]

“

[@brokenSnake]

Bro this is a terrible foam canon. Why not white label a MJJC?

[@jayskin2615]

Or you can save yourself time by realizing that foam cannons are a waste of time and a gimmick.

[@YungContentshow]

I hate their projects

[@getualife1932]

Will the swivel be capable of withstanding 4400 psi?

[@Bakedbanana007]

4400 psi is way too much for paint. Anything above 2000 psi will destroy your car paint

[@jawadiahmad7180]

First take : Prec*m Second take : *LOAD*

[@alangonzalez-tb7ub]

Why you detailing that shit box