THE BEST FOAM CANNON $10 thru $90

[@jcerna7226]

I’m all for the $10 sprayer. Sure the 75 and 90 ones are better but the price difference is ridiculous in my opinion. I would just carry a replacement back up.

[@HawaiiDetailing]

Yeah I have a few too

[@jackchen5264]

After going through my 4th $10 sprayer... I kinda wish I went with $75 at the beginning, at least I can start enjoy good canon from the beginning.... Only wish I knew 7 years ago.....

[@jezlucas3878]

What went wrong with yours ​@@jackchen5264

[@pooneyheat]

Let's be honest. We all buy these foam cannon's so we can see the best foaming action when foaming our cars and the MJJC Pro foamed by far much better than the top dog MTM PF 22.2. I'll definitely be adding that to my arsenal!! Thanks for the great comparisons!

[@HawaiiDetailing]

Thanks. I appreciate it

[@chaddelarm]

I agree, the MJJC preformed the best and is built the best. Easy choice. I have one and love it!

[@zadokmotorfreight2423]

Agree 💯

[@mrrossie]

Does the MJJC work with the Karcher K3 pressure washer?

[@koreywilliams4570]

I got one of the mjjc pros, it should be arriving today. I can't wait to give it a shot. Also I hear that some of these foam cannons could preform better with a 1.1mm hole instead of the 1.25 they have installed.

[@C-Handle]

$75 was the best for me. The foam action 🤯sheeesshh My $10 foam cannon also performed pretty badly (A lot of extra water coming from the top and bottom of the cone) when I would close the valve pretty tight, so I have to have the valve open around the same space as the $90 one. I think the $90 manufacturers also realized that fault, so they set the valve space limit.

[@HawaiiDetailing]

Thanks for sharing and watching

[@llamacebu216]

That's because you have wax build up in the filter inside. The mechanism is the exact same from cheap to expensive. You leave residue in the bottles it works it way up and sits in the filter. Clogs it. Poor foam

[@pv4083]

I’m not even into detailing but this guy’s energy just chills me out. Great videos.

[@HawaiiDetailing]

Thanks for watching!

[@swflguy9466]

MJJC for the win! Your previous review had me buy one. I have seen nothing compare. Also great advice about replacing the orifice, I have a simple SunJoe electric power washer, and the foam it produces is untouchable. Super thick. Remember everyone, lay the foam down on a dry vehicle. Not on a wet one, it allows the foam to stick to the dirt.

[@HawaiiDetailing]

Thanks for watching and sharing

[@mikeytheref3546]

Hey man I just bought the sunjoe Pressure washer, how do you like it? Did you upgrade it at all? And if so what upgrades

[@Guillotines_For_Globalists]

Good advice, I have been doing it incorrectly by giving it a rinse first. Muscle memory from using the hose and sponge, where I always rinse first before soaping by hand.

[@YoursUntruly]

Just earned my sub a minute in. I can already tell you’re a genuine guy who wants to help people make the best decisions for their money, and also who’s passionate about these things and what you do. Thanks brother.

[@HawaiiDetailing]

Thanks a lot. I appreciate it. Glad you enjoy the channel.

[@sash2803]

@@HawaiiDetailing Same here, pleasant to watch and very helpful

[@officerdoofy4184]

I bought a cheap foam cannon when I first got it all setup, I seriously will just be going with the $75 unit just for the peace of mind. I think it is insane because I am sure the mark-up is huge since it’s fairly simple stuff, but ease of filling up and solid foam and I wont have to worry about it for a long time. Appreciate the review man.

[@aurfalien]

Thank you for the great review and the bubbling water sound effects which to me was the best part of the review.

[@Matthew3753]

I had the MJJC. It was my first foam cannon. The foam coming out from that canon was insane. But, the thing about the MJJC foam cannon is that the plastic threading wears off. So when I had it for about seven months it detached while I was forming a car and left a big mess on the floor. In my opinion, the MTM foam cannon is the best. I had the MTM for two years and it’s bulletproof and the plastic threading is designed that it won’t wear off.

[@HawaiiDetailing]

Thanks for sharing. Thanks for watching

[@KiranPatel-fk1pg]

Which MJJC cannon did you have? I have both the PF22.2 and MJJC Pro V2. I find the MTM threads on the bottle to be average, to me the MJJC threads would hold up better cause the threads on the head are plastic. Also foam and stability wise I feel the MJJC wins. The pf22.2 is overpriced at this point since it lacks so many features.

[@pullingthestrings5233]

This is a year old comment and MJJC has surpassed MTM by a long shot these days.

[@peterjenkins7174]

MJJC towards the top end price wise, but looked to do an awesome job. Thick foam, easy fill and empty, weighted suction hose. For me a winner. Peter.

[@HawaiiDetailing]

Yeah it’s a good one.

[@BIackBoomBox]

DUDE IVE OWNED it for 2 years now. love it and worth it. I add LESS soap and still get MORE soap than my very first foam cannon that i ever got. like you said, easy to fill up with the wide mouth. ive used the 100 dollar one too at work. the only plus is the nozzle clicks and easier to adjust but i can live with the 75 for the wide mouth

[@joelnrs]

Your extra thoughts and opinions on usage and features are very informative and helpful. Thank you for taking the time to put so much effort in to your videos.

[@HawaiiDetailing]

Thanks a lot. I appreciate the feedback. Thanks for watching

[@davidcisneros5703]

That’s some pretty cool lighting you added 👌🏻👌🏻 the blue gives a nice vibe

[@HawaiiDetailing]

Glad you like it! Thanks

[@Jumalten001]

Im a Weekend Warrior and i went from an Amazon cannon to the MJJC and ive never looked back. It has all the features I need and is worth the $50-60 bucks you pay for it.

[@HawaiiDetailing]

Yes it is. Thanks

[@MikeBee77]

I have a MJJC, and I absolutely love it, has a wide mouth, provides shaving cream foam and the bottle is very stable, very well made, a winner to me. Thanks for the video!

[@HawaiiDetailing]

Yes I agree.

[@MatthewHurtado]

MJJC is looking like my new favorite. I have the MTM currently but I’ll be getting that MJJC next.

[@cal88usa]

I have the MJJC and it’s awesome. You won’t regret the purches

[@treyz9148]

I use the MJJC too and I love it. Shoots some serious thick foam especially if you change it to the 1.1 oriface. Love it.

[@HawaiiDetailing]

Its a good one. thanks for watching

[@J1Z06]

I love My MJJC!! It floods the car with foam!!

[@marios8593]

I like the MTM, as you said “Old Faithful”! I recently bought the Griot’s Boss Foam Cannon and I have to say the foam came out really nice!!

[@HawaiiDetailing]

Thanks

[@jefferybarnett6056]

MATCC snow canon for the win in my book. Paid around $20 for it if I recall and it has been awesome and never failed. It look very similar to your 10 dollar model, but the head does articulate and it lays down foam like crazy. I would like to offer a little trick since all soaps are not created equal and that's to put your soap in the container and add warm water ( not cold ) as many soaps will break down and mixed with the water much easier creating better foam results.

[@HawaiiDetailing]

Thanks for sharing.

[@keeloraz9452]

Not suffering with the $35, infact this is what a real review is. I seriously love your channel. It's friggen awesome and very satisfying.

[@HawaiiDetailing]

Thank you. I appreciate it

[@red44123]

The brilliant wash was rusting for me at the ball so I jumped to the boss and love it so much more. Gets so much foam

[@colinwithey6792]

I've got the mjjc for £49 very very happy with it I have a ford transit grand connect and can do the who vehicle in one go with a mega coating. The tool is so well built could say like a tank, you don't feel like if you drop the bottle its going to get damaged so happy with it, and I'm a real value for money guy.

[@Carlos.Rivera]

Wild card: Griots Garage brilliant foam cannon $60 bucks

[@afdetailing8104]

Literally the best one on the market

[@HawaiiDetailing]

Will give it a look. Thanks

[@chrisguzman7926]

my go to, use it with the metering tips and works amazing

[@youcanfindrace]

@@afdetailing8104 no quick connect. So jn my opinion.. that’s false

[@whome5770]

So the MTM has a small neck opening, has a zinc disconnect that you seem recommend to replace, and it don't fully close, on top of all those disadvantages it has the highest price point. Seems the $10 is the way to go.

[@richardfarmer6570]

I have one of the $10 ones and it works fine. It has the drawbacks you talk about, likes to tip over especially when nearly empty and the neck is too small. Nice thing is if I need to replace it doesn't hurt nearly as bad.

[@HawaiiDetailing]

Thanks for sharing.

[@JesusMartinez-mi5oh]

Dude, you are such a friendly guy. And great videos, as always 👍🏻

[@HawaiiDetailing]

Thank you

[@n0bodyc8res]

I tossed the Greenworks one that came with my washer after 1 use. Got the MJJC Pro from referencing another video, works great! The size of the mouth is a HUGE factor., it can save you minutes per use and not to mention wasted product.

[@HawaiiDetailing]

I agree. Thanks for sharing

[@SpartanKyuubi]

I upgraded from my MTM Version 2 to my MJJC version 2. Also, the weighted ball in the mmjc feed tube makes a big difference when running low on product inside the bottle.

[@HawaiiDetailing]

Yes. I agree.

[@fillflashdetailer8838]

My absolute favorite, hands down, is the Griot's Garage Brilliant Finish Foam Cannon for $64.99. It's the only cannon I've used that was able to unseat my MTM PF22.2.

[@mikesando7766]

Great video. I have the adams foam cannon. The wide mouth was the ultimate deciding factor when comparing against the mtm.

[@HawaiiDetailing]

Yes I like the large opening for sure

[@J0j0m10]

I like the $75 model. The wide opening is a plus. Cool video!

[@HawaiiDetailing]

Thanks.

[@chelsabailey1018]

I live on a budget and I'm not a pro detailer, so, I'm down with the $10 foam cannon. Perhaps I'll be able to upgrade to the MJJC or the MTM, but will stick with what I can afford for now. Cool video and thanks for posting!!

[@HawaiiDetailing]

@@chelsabailey1018 great plan. Thanks for sharing

[@OfficiallyGuChi]

I bought the mjjc 2 Christmases ago. Used it again today and it still produces thick foam like the day i first used it and it lays on the foam thick top to bottom. Ive zero issues with mine so far

[@HawaiiDetailing]

Thanks for sharing!

[@afdetailing8104]

You have to try the griots garage brilliant finish foam cannon! It’s my favourite by miles, I don’t even use my MTM anymore!

[@NyTonyF]

Same here, the GG BF cannon is my go to. My MTM is on the shelf on standby. lol

[@HawaiiDetailing]

Thanks for the suggestion

[@Kenpobruce]

Same here , the GG BF cannon is my go to.

[@reddyuda]

My man, answering the real questions.

[@HawaiiDetailing]

I try to. Thanks for watching

[@gilbertocharpentier6391]

Great review! I had something similar to the 10$ f.cannon that I bought locally advertised as pro for 45$ that works well. However, I did the upgrade to the MTM.PF22.2 BUT, the bottle on the 45$ has better quality than the one on the MTM.PF22.2 (easy to squeeze). On both, the downside is the orifice, quite small to put the detergent or to clean it up. From the review Jeremy, I would go with the MJJC, bigger orifice, "bell" shape bottle and appears to be a good quality material on the bottle and on the whole f.cannon. You have the vertical and horizontal option for the foam, steel bearing on the hose. And top foam!

[@HawaiiDetailing]

Thanks for watching and sharing your thoughts

[@viperrcr]

MJJC was putting out shave butter! Wow!!! That gets my vote!

[@HawaiiDetailing]

It lays down the shaving cream for sure. Thanks

[@jcto6013]

I always struggled with the cheapo foamers because the internals start rusting with regular use, and the foam consistency degrades over time. I used to wash my cars about twice a month and every year I needed a new foamer. I am on the MTM now, great foam output, but the small neck really frustrates me when I am trying to rinse it. I recommend a screw on funnel from Adams or Griots.

[@HawaiiDetailing]

I agree. Thanks for watching

[@jh.f30]

Damn, I wash my car twice a week lmao

[@CyberSkunk90]

I use the Sooprinse $20 foam cannon. You should include that one in here. I'm really impressed with it. Definitely not as thick foam as the MJJC, but definitely good bang for your buck. I think I might upgrade to the MJJC just so I can get that super thick foam action

[@sbinnala]

Buy the $16 Feng Pai or $28 1.5L Tool Daily. Both of these foam better than any of the lower end ones, and just as well as MJJC. Supposedly the higher end ones are just built off the Feng Pai one. The performance of both of these absolutely blew me away, using Meguiars Ultimate Snow Foam. I haven’t even tried my tried and true Gold Class!

[@abibodlogistics]

Honestly you're very funny and I must say that you are a very good presenter,I subscribed to your channel immediately because I love to hear from you again.I wish you the very best.

[@HawaiiDetailing]

@@abibodlogistics thanks a lot. I appreciate it.

[@deucekiller022]

I’ll stick with my 10$ bottle foams really good does what I need it to .

[@HawaiiDetailing]

That all that counts.

[@cerealkiller4248]

I have the MJJC foam cannon and the MJJX short trigger gun, I use Bilt Hamber Auto Foam, it’s a lethal combo for blasting dirt

[@HawaiiDetailing]

Hahahaa. Yeah. Thanks for sharing

[@peterjagt]

Being new to the world of foam cannons….perhaps a too basic question: is thicker foam doing a better cleaning job? Can imagine there is some sort of sweet spot wrt to the thickness….

[@HawaiiDetailing]

I like it to be thick and cling for a long time. This makes the dwell time of the product longer to enable it to break down more dirt and also the thick foam prevents it from drying on the paint as quickly. Thats my thoughts anyway. Thanks for watching

[@christianclifton5204]

love the content man! I'm starting my own detail biz and all of your videos are well put together and explained. thank you !!!

[@HawaiiDetailing]

@@christianclifton5204 thanks. Check this out as a resource if you need it. www.hawaiidetailing.com let me know if you ever have any questions

[@theLizardof0z]

I know this is an older video, but I wanted to make a quick comment. I tested out a "cheap" cannon off Amazon and compare side-by-side to my MJJC. As crazy as it sounds, the cheap cannon stunned me in its ability to kick out very thick and consistent foam. The Tool Daily Foam Cannon only cost me 19 bucks and the components have held up fine through many customer washes. My thought is, for 19 bucks, I can get several for the summer help and if they do drop it and something fails, I'm not at a big loss. If they dropped my MJJC, I'd be pretty heartbroken.

[@HawaiiDetailing]

I use these less expensive ones as beaters too. Good idea. Thanks for watching

[@mikereddy1980]

Great review looks like your air intake screw on your pf22.2 is rusting badly replace with a M4 x10mm stainless screw quick cheap fix ,keep up the great reviews

[@HawaiiDetailing]

Yes it is. Thanks for watching

[@nctarcop]

I appreciate the review. I just ordered the MJJC 3.0 and a bottle of the Adam's Mega Foam.

[@HawaiiDetailing]

Awesome. Enjoy.

[@cal88usa]

Great review. I had a $80 chemical guys foam cannon, that was trash. I bought the MJJC, I will NEVER go back to the chemical guys bottle. Out of all of these cannons, I think the MJJC won the battle.

[@HawaiiDetailing]

I agree. Thanks for watching

[@marcos.alvarado3990]

Hi there! Would be cool to see a "budget" version of equipment for a total walkthrough of car cleaning. I'm just starting to build my kit and would like to invest money in what you think is the best bang for buck equipment that isn't the absolute highest tier. Thanks for taking the time to make these videos and share your honest feedback!

[@HawaiiDetailing]

I will definitely put something together soon. Thanks for watching

[@MrGamecatCanaveral]

Thank you sir! I've been debating over these cannons and you just confirmed my original choice. Bell shaped, big opening!!! I didn't think about it tipping over or when you have to empty it out. Small things but they are irritating to me.

[@HawaiiDetailing]

Glad you enjoyed. Thanks for watching

[@sergiomoreno4433]

Congrats from Toluca, 🇲🇽. We are coleges, out company does the Recon for an american auction. To make and wash with foam is an art, i like your video. We use Stinger Chemicals, Tornador accesories and Comet high pressure pumps, 3R vacums with Ameteck motors and localy made Swipe cleaners. Regards and the best for you. Ohhh, and great shop…it’s a lab!

[@HawaiiDetailing]

Thanks a lot. Thanks for watching

[@johnivan5456]

The third one was the best but I was also impressed with the 10 dollar one as well

[@HawaiiDetailing]

I use the 10 dollar one for harsh products so it does not tear up my good one. Thanks for watching

[@chrisb7161]

The second one problem might be the filter causing excessive pressure drop on the soap. Take the filter out and try it again!

[@Ernestosgarage]

Love the shirt. Blue all the way and Superman . Heck yeah

[@jaszczfamilyventures6624]

I was looking at buying the mjjc... but now that 10 Dallar one looks good to me.

[@HawaiiDetailing]

It’s just ok for the money. The MJJC is a real foam cannon and will last a long time with great results. It’s my favorite

[@garyjermyn6862]

A very good and enthusiastic video , will buy the one you recommend

[@HawaiiDetailing]

Thanks for watching. I appreciate it

[@ddautodetailing]

Great video. I just reviewed the MJJC foam cannon and it worked great. It will bemygo to foam cannon!

[@HawaiiDetailing]

Yeah. It’s a good one. Thanks

[@Vanhamj1]

would love to see you review the 2 Griot's models. They seem like the MJCC, and have features the MTM is missing.

[@ismaelcarrerojr7124]

They all good especially the $35 bottle just maybe by removing the filter from the plastic end will give you better result, remember the soapy solution is thicker than water.

[@HawaiiDetailing]

Yes I agree. I wanted to test it as is. I plan to troubleshoot it and get it working. Thanks for watching

[@thenegus5469]

@@HawaiiDetailing did you ever get it working?

[@robertyates3333]

Yea I’d like to know also ?

[@tightIy]

Great review man... Thanks ... I was fed up with my Bowdens snow cannon bottle because the top narrow screw part always broke. Now just ordered the MJJC from Australia :-)

[@HawaiiDetailing]

Thanks. I appreciate it.

[@Engineerboy100]

Thanks for an awesome video. I just ordered my MJJC Pro, can't wait to try it. I'm sure I'm gonna love it. Good job!

[@HawaiiDetailing]

You will. It’s a good tool.

[@otm777]

$10 model hands down. Save the $80 for the soap and other products

[@jasonclemente4392]

the new top dog foam cannon is the Griots Brilliant finish foam cannon but you must buy the teal tip on their website to get the max performance on it its actually a secret feature that it has .. it crushes the MTM by a long shot! !! give it a shot on your channel ! its a solid foaming cannon the suds stick to the paint and does not run like MTM does do not get the boss version.. its not as good as the brilliant finish version

[@HawaiiDetailing]

Thanks for sharing

[@jc51373]

the small neck of the MTM is the reason to buy quite honestly..Alot of the ones with large necks the weight of the water makes it disconnect easily wasting all your mix. MTM thought this out, it's super stout.

[@imdustyjames]

cant decide, 4th for the foam, but 3rd for the bottle wide features and lower price

[@bfilz]

I was thinking the MTM but I'll be going with the MJJC when my $10 amazon stops working, LOL!!! Nice review...these comparisons videos are great!

[@HawaiiDetailing]

Thanks a lot.

[@phat_gunpla_etc]

i see lots of vids on using the foam cannons but what about after the foam..what is the next steps? i see you have a tesla. could you make a vid on steps from foaming to finish...? sorry for the novice questions

[@HawaiiDetailing]

kzbin.info/aero/PL_utjqZAQxZZX5axbPGYSR5XQH2nsMwwn Thanks for watching

[@phat_gunpla_etc]

@@HawaiiDetailing sweet! btw, love your vids! you are so happy! guess you live in paradise!

[@BigBear--]

The MTM can sometimes be a little picky with the concentrations of product to water, but its a great all arounder. I would like to see the $35 model tried without the "filter" attached to the hose end, I have a feeling that may be why it was acting weird. The new Griots cannon, not rhe Boss, but the slightly cheaper unit, seems to have a lot going for it. To be honest, while I love the look and feel of that extra thick foam, and its fun to use, I have a feeling it actually does a worse job of actually cleaning the surface than foams that are a little runnier. If its super thick, most of it won't make contact with the surface, it also doesnt have enough water to actually wash away the dirt. But hey, i guess thats what the rinse is for, lol!

[@HawaiiDetailing]

I know what you mean. I like thick foam as it gives me more working time to get around the vehicle. Thin foam starts drying right away in this hawaii heat. If the foam is thick and clings well I can get all the way around with no problem. Fun to use too. Hahahaa. Thanks for watching

[@BigBear--]

@@HawaiiDetailing didn't think of that, but that makes sense. I'm in cooler environment so the working time is bit longer here. Thanks for the insight.

[@paulhughes3961]

Next Griot's Boss and Brilliant Finish cannons. I have both and they put out great foam.

[@HawaiiDetailing]

Thanks for sharing

[@johnp6987]

If swirl the plastic container on the MTM when emptying, any liquid will come out quicker as it’s not fighting the air coming in

[@BloodSweatnBass]

I got a $17 Dusichin Fosm Cannon and changed out the orifice to a 1.1mm and it performs like its a $75 foam cannon.

[@SIat]

I’d be curious to see if the orifice from the MJCC foam cannon makes a difference in the other foam cannons🤔

[@vector150]

I hate to tell you all those bottle use the same quality virgin polymer. My question is how many of them if not all of them was made by 10 year olds in sweat shops in china. That being said great video liked seeing someone comparing them.

[@HawaiiDetailing]

I know what you mean. Nothing is made in the USA anymore. Thanks for watching

[@vector150]

@@HawaiiDetailing NP I like your videos. Plus I have worked as a maintenance technician in the plastic/blowmolding industry for 30 years. Im the kind of person that grabs plastic bottles and feels them for quality issues...I know it is sad habbits of the job follow me into everyday life lol.

[@23dothedew]

The brilliant finish Griot’s foam cannon is awesome! Because of the thick foam it produces with the large mouth and the price point, I think it beats the MTM

[@HawaiiDetailing]

Thanks. Hows those cams? Get them hooked up yet?

[@23dothedew]

@@HawaiiDetailing I’m hooking up the first one today!

[@4940123]

Can you do the one from the chemical guys model? I also bought the MTM and the one from griot’s. I really like that you can use two different type on bottles on the griots.

[@lloydgthedetailer]

Back in the day I started with the $10 special, but as soon as I got my hands on the MTM, and oh man do you get what you pay for!👍

[@HawaiiDetailing]

You do. The 10 version is a great back up or wheel cleaner cannon. Thanks

[@jeepguylv80]

i have to say, since i only wash my 2 vehicles, and i do not use foam that much unless i go a few weeks without washing, i would choose the $10 one, but if i had a detailing business i would choose the $75 one, to me it seemed the best, i liked the foam and the wide mouth, the $90 one with the small mouth just wouldn't cut it for me.

[@HawaiiDetailing]

That’s my fav also. The MJJC.

[@Lucas_Collins]

50 seconds in to your video, and I already hit subscribe. Your voice is rad, man! hahaha. Funny cause I was looking at getting a new foam cannon

[@HawaiiDetailing]

Thanks. I appreciate it.

[@davidortega7496]

Again Dude, You bust me up!😂😂😂 Great video. David

[@HawaiiDetailing]

Glad you enjoyed

[@zSomertonn]

1 minute it and i love this dude already, man!😂

[@HawaiiDetailing]

Thanks.

[@NHSSHINOBI]

I'd purchase the $10 cannon. I think it did very well for that price.

[@xHustleHaRdx]

What a great video. We appreciate you for what your doing. That MJJC Foam Cannon Pro Is A Beast! Also the $35 Bravex Foam Cannon Is Pretty Good As Well It Just Didn’t Perform well

[@HawaiiDetailing]

Thanks for watching

[@AnakinVeyder]

I year 3 into that 10 dollar thingie! Can’t complain 😊

[@HawaiiDetailing]

Thanks. I appreciate it

[@erayalcor]

Un consejo!! A los cañones de 10 dólares cambien su boquilla por una de 1.1mm y un filtró de 5 pasos y verán que mejoran muchísimo.

[@stewartherbert6847]

Hi good video mjjc pro first then mtm 22.2 then the $10 there are my best three 👍👍😀

[@HawaiiDetailing]

I agree. Thanks

[@bekiro28]

i have the griots 60$ one out perform my mtm 28 spend the bottle quicker than mtm i love them both use mtm one for wheels griots one for paint

[@HawaiiDetailing]

Yeah. Good idea. Thanks for watching

[@Americanboy5150]

What is the benefit of foaming soap as to me just hand washing my truck . Also what type of sponge or rag would you recommend for hand or bucket washing ?

[@J1Z06]

You need a 55 gallon drum of Mega Foam!! 😅🤣. That one that was a little wacky? Definitely avoid that one! Never had an issue with My MaxShine or the others I have.. Maybe the size of the inlet on a few of them is a bit annoying. Thanks for another great video! I'm going out to foam/wash two cars. Adam's Mega Foam coupled with either GSF or Reset!

[@HawaiiDetailing]

Thanks man. Have fun out there.

[@masonfox9070]

With the small ones couldn't you just prerinse the soap off with water in the cannon to rinse it out?

[@brooklynpratt]

Hi Jeremy. First let me say I love and enjoy your videos each and every time. However this one has me scratching my head for just one reason. Why is the MTM your favorite when it clearly has 4 strikes against it, especially when those strikes are the ones you say don't make for a good foam cannon - the wide neck, the stainless steel quick disco, the brass body, and the full close motion. The MTM has none of those. And there are only 6 criteria and it "failed" on four. If it was just one maybe two then I would say by all means love it. It's yours. But logically based on how you presented "a good foam cannon" it just doesn't fit. What are you thoughts? Thanks! keep it going!

[@HawaiiDetailing]

Thanks for asking. I was saying that the MTM was my favorite for a long time. I wanted to share that the MTM has served me well and is a good cannon but is due for some critical updates in my opinion. For this reason I would go with the MJJC. MJJC is my go to cannon of choice at the moment. If you already own an MTM I don’t feel like it needs to be replaced as it is a faithful good tool. I did my whole foam series with it and will continue to use it but there is no denying that the MJJC put out some insane foam and has all the modern updates. If you are in the market I would strongly suggest considering the MJJC. I wanted to share with you all things I think make a good cannon in this vid. Keep in mind that these are my opinions. Hope that helps and thanks for following the channel.

[@brooklynpratt]

@@HawaiiDetailing Ok understood. No I hear you and agree with everything you said. Thanks!

[@HawaiiDetailing]

@@brooklynpratt thanks for watching and reaching out. I appreciate the comments.

[@yunahista3985]

Well. Great video . I own the MJJC because easy to get in here. Greeting from Indonesia .

[@HawaiiDetailing]

Thanks

[@J1Z06]

MJJC PRO for the win of late!! Loving it!!

[@HawaiiDetailing]

It’s a good one for sure. It cranks out the foam. Thanks for watching

[@nickevans3190]

The $35 one just needs the orifice changing to 1:1mm Orifice and it will be faom town once again 😊 and possibly change the filter for a foam type

[@hsc1831]

I have the mtm pf22.2, it produces great foam, I still have to try my Griots Garage Billiant Shine yet as it just arrived yesterday. Since I use Karcher K4, I have to replace the orifice to 1.1. Definitely, you have to battle Griots vs. MJJC. I love your videos man.

[@HawaiiDetailing]

Thank you. I will for sure

[@Sepulphuric]

Thought this was Tony hawk when I saw the thumbnail

[@gabelitell8632]

Better off with mjjc I think it rocks 🤘 MTM I think is ok You ought to try griots garage boss or brilliant finish Awesome reviews keep them coming I like your humor more than others

[@HawaiiDetailing]

I'll check it out for sure. thanks

[@mrmelted8668]

Just spent 35$ on the harbor freight cannon but after i’m done using and abusing it i’m gonna be eyeing that 75$ one u showed in the video

[@HawaiiDetailing]

It’s a good one.

[@staffordboy7824]

I have both the MTM & MJJC canons, the MJJC produces thicker foam but the MTM definitley cleans my cars better !

[@xamphoa]

MJJC is the clear winner. Big mouth, steel pickup ball, stainless quick connect, cheaper than MTM, thickest foam of all.

[@HawaiiDetailing]

I agree. Thanks

[@CarlosRamos-dj5kn]

Overall was a great demonstration but I have that $90 foam cannon and it gets runny most all the time can explain why, if someone has an explanation on why it is doing that I'll really appreciate it, on the meantime I also the $20 one from Amazon and it does a great job, Thanks!!

[@HawaiiDetailing]

The orifice size may be too large for your machine output.

[@Guillotines_For_Globalists]

My gripe with the $10 cannons is the small opening for pouring soap in. And the threads will eventually strip out.

[@HawaiiDetailing]

Yeah. I am a you get what you pay for mind set. I would use the $10 one accordingly. Thanks for watching.

[@Guillotines_For_Globalists]

@@HawaiiDetailing I'm not a pro either. It's "good enuff" and the price is good for when it inevitably gets damaged due to dropping the bottle. I've had 2 $10 units in about the last 8 years now. Gets used a few times a month if that, I don't always use the pressure washer for quicker maintenance washes. I also changed the internal screen to a different flow rate for supposedly better foam results, although I am not sure if I notice any difference at all.