Thanks for sharing your video! I learned a great technique of glazing beads. I already have uv resin and I love it.
@BeyondBellieBeads5 жыл бұрын
Love it Kelly! I have used this process with a UV lamp but I have way too many . I love the shine!
@ChellejonPaperBeadRollers5 жыл бұрын
I'm going to work on a process for mass producing this glaze Gina!
@BeyondBellieBeads5 жыл бұрын
@@ChellejonPaperBeadRollers yay!
@elizabethhaddon714 жыл бұрын
Catching up on all your videos I missed!! You do an awesome job with respect to quality of video, and information given 😀
@ChellejonPaperBeadRollers4 жыл бұрын
Welcome back! I'm catching up on all of the comments I've missed too! LOL!!!!!!!
@transmediapedia37324 жыл бұрын
Thank you for the great info! Would you mind sharing your observations on how the UV coating is holding up on the beads? The beads you demonstrated on turned out beautiful! After time did you notice any yellowing, cracking or other concerns?
@ChellejonPaperBeadRollers4 жыл бұрын
I have not noticed any cracking yet! Crossing fingers!
@lesleygilbert19455 жыл бұрын
Great finish in the end and blue, my fav. colour. Never heard of the uv resin thing so something for me to google later :)
@ChellejonPaperBeadRollers5 жыл бұрын
It's so neat!!!
@stropheum6 ай бұрын
Hey there! super late to this video and appreciate it a lot. What I like to do though is just create a prep station at my desk - I have a foam base that i can stab skewers into - i'll hit the glaze with a UV flashlight for a minute or so, just until it stops flowing and keep chugging along - I just need it to not move. Once I get my full 4x4 bed of skewers filled, I'll take it out and leave it on the porch so it gets blasted with sunlight. Once I do that, I repeat the process with a second bed. The time it takes to fill a 4x4 bed, the original beads are already fully cured, so i'll pull them off and put them in a baggie and leave that baggie on the porch just in case (they're never tacky at this point, but i like to be sure it's fully cured)
@ChellejonPaperBeadRollers3 ай бұрын
Great idea! Thanks for sharing!
@barbarajackson30765 жыл бұрын
As I have posted before, I don’t make paper beads. I have attempted to use plain paper beads and cover very large ones with polymer clay. But because they have smaller holes I sometimes can’t use them. I have searched all over for ones with a 5mm holes. I have been using UV resin for quite awhile. It can create a great seal and adds a glass like finish! I tried 5 types and finally found one that is consistent. Some stay tacky,others can yellow.so after many failed attempts I can give you the most consistent and fairly inexpensive brand. If anyone knows where I can find plain paper beads that are flat,with a 5mm hole it would be so greatly appreciated. I am home bound quadriplegic with the use of one hand so I can’t get out to look around. I love watching the process. The skewer you’re using looks large for creating bigger holes,can you also link to that? Thank you again
@ChellejonPaperBeadRollers5 жыл бұрын
Hi Barbara! I got the skewer at Walmart, it's about the size of a 4mm hole. When you say flat paper beads, I'm not sure what you mean. Like a saucer shape?
@barbarajackson30765 жыл бұрын
No I mean flat like cylinder,or barrel possibly.
@CandyOh15 жыл бұрын
Great video Kelly!
@ChellejonPaperBeadRollers5 жыл бұрын
Thanks Candy!
@starschloneger9586 ай бұрын
Can you clean your brush after or do you have to throw it away? Can the UV light burn you?
@ChellejonPaperBeadRollers6 ай бұрын
I did not clean my brushes. I'm not sure if you can. The light won't burn you, but you do need to wear eye protection.
@sandraarmstrong14144 жыл бұрын
are these torches save to use if you suffer from migrane,they look awesome the beads are lovely
@ChellejonPaperBeadRollers4 жыл бұрын
I don't exactly know. The heat is very focused, but there could be smells that would bother you. Sorry you have migraines! I have had them as well and they are NOT easy to deal with.
@INDRA_85 Жыл бұрын
hello Kelly 🤗 , i also made pearls with this uv resin but unfortunately the brush gets hard after a while. How did you clean your brush afterwards? Is there a solvent for uv resin? Unfortunately, hot water is not enough. Otherwise the result is super nice! Thanks Indra 🙏🥰
@gillianwiseman3518 Жыл бұрын
If you wrap your brush between uses so it isn't exposed to light, the resin will not harden, and you can use the brush for quite a long time.
@msmygia4 жыл бұрын
Cool!
@gr1222 жыл бұрын
the link for the light is broken
@maureencolahan36705 жыл бұрын
Great video Kelly! Wondering if an Ott light would work? They give off some UV light!
@ChellejonPaperBeadRollers5 жыл бұрын
It says on the bottle that 20 minutes in the sun equals 2-4 minutes under the UV lamp. So it probably would work.
@maureencolahan36705 жыл бұрын
I will have to try it!
@ZamboniSamantha3 жыл бұрын
Ciao cara ma se io sigillo tutta la perlina con la colla secondo te fa da strato per non fare penetrare la resina?
@antoberen66445 жыл бұрын
Ciaoo...vengono benissimo con la resina😋...questo tipo di resina dove la trovo?
@ChellejonPaperBeadRollers5 жыл бұрын
Ho comprato la resina UV su Amazon amzn.to/33pdQkh
@monicawilcox20184 жыл бұрын
Has the UV resin or Embossing Powder cracked on your beads?
@ChellejonPaperBeadRollers4 жыл бұрын
No, it hasn't yet. But I've heard from other people that is tends to crack.
@candacesmith35803 жыл бұрын
@@ChellejonPaperBeadRollers Which tends to crack, the embossing powder or the UV resin?
@TheHappyHomesteadingHerbalist5 жыл бұрын
Doesn't last for me. It eventually cracks.
@ChellejonPaperBeadRollers5 жыл бұрын
Good to know! I wondered how durable it would be.!
@TheHappyHomesteadingHerbalist5 жыл бұрын
@@ChellejonPaperBeadRollers In defense of UV resin, I do have one bead that hasn't cracked. It's a Tyvek bead. I'm interested to see how it holds up for you. I may have just did something wrong.
@somatonusbewegenmitwohl-fu2167 Жыл бұрын
They look great. But … What about issues concerning health?
@ChellejonPaperBeadRollers Жыл бұрын
I'm not sure what you mean? All the materials are non-toxic.