How To, Harley Davidson Twist Grips Install.

How To, Harley Davidson Twist Grips Install. This was done on my 2002 Harley Davidson Road King. This will work on most Harley Davidson motorcycles. I purchased these New Twist Grips for $26 with shipping. Just let us know and we will send you the link. Any question just ask. Thank you for watching.
#Harleydavidsonfix
Tools needed
3/8 open end wrench
5/32 Allen head bit.
torx T25

[@chrismoreau9187]

Thank you so very much for all your professionalism and your tech support !! I truly appreciate your Harley experience that you pass on to us !! Many thanks Chris 🤟

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub Chris. Ride safe and have a great day. Happy Fourth of July.

[@chrismoreau9187]

Thanks again and we will keep watching! Happy 4 of July to you !! We celebrated July 1st. Here in Nova Scotia , Canada !! Cheers

[@marcusulery628]

I've used your videos to help with my my 2007 roadking a few times..... best and most informative videos I have seen yet!! Thank you so much for being here for me!

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your support Marcus. Ride safe and have a great day.

[@boomerguy9935]

For the left side grip that requires glue, I used a method that I've been using for decades on my mountain bike grips. Instead of glue on the inside rubber, I use rubbing alcohol which is slick until it evaporates; then it won't budge. Just let the grips sit for an hour or so. The next time you have to remove it, just spray some WD-40 in the opening edge and twist the grip until it works its way in and the grip slides off. Once off, you can remove the WD-40 with rubbing alcohol and a rag (brake cleaner spray if it's a bear) and use the grip again later. For those who really want glue, hair spray does great and doesn't make a mess. Very sticky.

[@TwoWheelRocco]

I appreciate the tip, Thank you for your comment and your Sub Boomer. Ride Safe and have a Great Day

[@boomerguy9935]

@@TwoWheelRocco I try to watch all your videos. They are relaxing, like therapy in the Man Cave. Thanks and keep them coming!

[@TwoWheelRocco]

Thank you for your Kind words...

[@motomenace5243]

Bet they got all gummy too?

[@twister4489]

Thanks for helping me get a grip on doing this upgrade!😂😂😂

[@TwoWheelRocco]

Any time! My Friend...Thank you, For all your support.

[@ericcraigo3432]

Thanks for everything you do Rocco!!!

[@TwoWheelRocco]

Happy to Help, Any questions just ask. Thank you for your Sub Eric. Ride Safe and have a great day.

[@greensmoke679]

TWO WHEEL ROCO SAVES THE DAY AGAIN THANKS

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and all your support Green smoke. Ride safe and have a great day.

[@daniellshine7971]

Thanks for showing us how to complete this change out , Rocco

[@TwoWheelRocco]

Always Happy to Help...

[@alarry31]

Lol been looking for a good video on how to remove them lol shoulda just came here first.

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching all your support Larry. Ride safe and have a great day.

[@wayneslawncare9274]

Great how to video as always...thanx

[@TwoWheelRocco]

Happy to Help, Thank you for watching. Ride Safe and have a great day.

[@dougdewitte6224]

great video my friend! This weekend I'm gonna do my grips on my 2007 ultra classic. Here we go.

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub Doug. Let us know how it works out. Ride safe and have a great day.

[@txproudproudamerican9474]

Watched this video and then changed mine out in about 30mins. Thanks so much!! One thing I noticed was mine didn't have any grease on the right hand throttle so I didn't put any on.

[@TwoWheelRocco]

Happy to Help, You don't need any grease, my was a little rough.. Thank you for watching and your Sub T.P.American. Ride Safe and have a great day

[@glencothran]

Thank you for the education

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching in your sub.Glen. Ride safe and have a great day.

[@glencothran]

@@TwoWheelRocco I bought the grips for my 07 fatboy you see me on here. Never changed grips but it is time. Going to try myself and save the money instead of having Maryville Harley do it for me. Tennessee.

[@TwoWheelRocco]

@@glencothran just take your time and be aware of those brass cylinders. You should have no problems. Let us know how it works out. Any questions just ask. Ride safe and have a great day.

[@kennethayers5624]

Hey Rocco,I also have a 02 Road King,followed your instructions and was a breeze..Mine did not have any grease,but I did grease the replacement grips..hope I did not screw up..anyway,thank you so much for all the vids....stay safe.

[@TwoWheelRocco]

Happy to help. That should be no problem. A little grease. Can't hurt anything. Thank you for watching all your support Ken. Ride safe and have a great day.

[@randallmcwilliams4966]

Looks great bro! Sturgis crowd down 30%...be safe...

[@TwoWheelRocco]

Thank you Randall. Any questions just ask. Ride Safe and have a great day.

[@randallmcwilliams4966]

Two Wheel Rocco You too my brother!

[@lukewilson4824]

I’ve got those exact grips on my bike too

[@TwoWheelRocco]

Great grips for the money. Thank you for watching and all your support Luc. ride safe and have a great day.

[@kengecheung9929]

Good video, thanks! One question, what grease did you put into the new grips?

[@TwoWheelRocco]

I use Mobile Synthetic bearing grease. Helps with vibration too. Thank you for your Sub Dongling. Ride Safe and have a great day.

[@trevorpalmer1621]

When you loosen the screws that hold brake lever, can a guy pivet your brake handle a little?? I just ordered some grips from harley but I wanna tilt or pivet my clutch and brake lever just a smidge. Thanks

[@TwoWheelRocco]

Happy to Help, it's easy enough to just loosen remove install and don't break nothing let us know how it works out. That little pin on your brake lever fire throttle will fail.. Thank you for watching and you sub Trevor. So how it works out we careful Ride Safe and have a great day

[@josedaniel4725]

Do you have a video on replacing the switches? Horn,blinkers etc..🤔

[@TwoWheelRocco]

Sorry I do not, I will place on my list. Thank you for your Sub Jose. Ride Safe and have a great day.

[@josedaniel4725]

@@TwoWheelRocco you too thank you for your videos really helpful

[@danlassiron883]

Hi I liked how would you thing for a Street 750 will woe la, how can i figured out

[@TwoWheelRocco]

Happy to help. And yes that would work on the street 750. Thank you for watching and your sub Dan. Ride safe and have a great day.

[@frankfungus13]

Hay Rocco. Hope that you’re enjoying the summer. Could you please send me the link for the grips. Thanks Tim.

[@TwoWheelRocco]

Happy to help. I will send you the link from Ebay. Thank you for watching and your sub Tim.. Ride safe and have a great day. Let us know how this works out. www.ebay.com/itm/324186809677

[@twinsof86]

I have a 2003 (100 yr Anniversary edition )Road King .It should be the same as this ,correct ?

[@TwoWheelRocco]

Happy to help. Yes they are the same.. Thank you for watching and your support twinsoif86. Ride safe and have a great day.

[@rsk8310]

Well I put the same grips on my 02 RK and it went very well except for the brake lever switch, I didn't even think to look at how the brake handle fits back into place and now my brake light stays on. I took it apart several time but right when I snug the brake clamp to the handle bars it activates ( deactivates the switch ) now. I tried everything I know, the brake switch boot looks torn and i don't know if there is a spring that came out or not. the switch works but activates as soon as i do my final tightening of the brake lever to the handle bars. Any suggestions? Thanks.

[@TwoWheelRocco]

Take a look at this video. kzbin.info/www/bejne/rqa8cmeHrtSSZsk. Hope this Helps.

[@marcusulery628]

The switch is in need of replacement.... went out on my 07 road king a few years ago also

[@rsk8310]

@@marcusulery628 So what I ended up doing was add some superglue mixture to the handle part that pushes in the switch when not pulling the lever and it worked. If you mix super glue with baking soda it creates a solid form that is real strong and can be filed.

[@tomsp-1517]

Hi Rocco, is this the same way on a '98 XL1200C? Greets from Germany :)

[@TwoWheelRocco]

Yes it is. Any questions just ask. Let us know how this works out. Thank you for your Sub Tom. Ride Safe and have a great day. Ebay item.www.ebay.com/itm/Harley-Davidson-Sportster-Dyna-Glide-Softail-Road-King-CHROME-SKULL-GRIPS/324186809677?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648. Hope this Helps.

[@tomsp-1517]

the new handles won't come until mid to late November. I chose the original ones from HD

[@TwoWheelRocco]

Let us know how they work out. Thank you for your update. Ride Safe and have a great day.

[@jackieandedp.4688]

Good video! I have the same old gummy grips on my '98 RK. Please send me the link, and I'll send for a pair. Thanks!

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub Jackie and Ed. Ride safe and have a great day. www.ebay.com/itm/163051120797. They have went up in price but they are still a great value.

[@elliottnunez1057]

Hahaha opened up my throttle and yup one tiny little brass piece is missing. The one connected to the throttle had one the other cable didnt!! . I know I didnt drop it cause the cable was still in place!! I went to Harely and bought two new ones just to be safe!! $4 bucks apiece!! Cant even find one with a metal detector since they are brass LOL

[@TwoWheelRocco]

Happy to help. Yeah those little bastards grow legs in a minute. Got to be careful. Smart to buy an extra one. I did the same. Thank you for watching. And all your support Elliot. Ride safe and have a great day.

[@mikehammer2408]

Rocco do a video on that Vett I saw in the background

[@TwoWheelRocco]

Here you go. kzbin.info/www/bejne/eHWnZ2R-gs2EnKc. Let me know what you think..

[@mikehammer2408]

@@TwoWheelRocco Beautiful What part of Fl are u in? I'm also from Ny. Smithtown LI. I'm in Sarasota now.

[@TwoWheelRocco]

Port St Lucie. East coast, You are 110 miles away. Any questions just ask. Happy to Help.

[@gilbertguerrajr.5005]

Can u please send me the link to order a set mine just got a light brittle and fell off riding home but got home holding it place all the way home

[@TwoWheelRocco]

Happy to Help, .www.ebay.com/itm/324186809677. Let us know how this works out. Thank you for watching and your Support Gilbert. Ride Safe and have a great day.

[@vt6984]

Can I have the link for the gribs please?

[@TwoWheelRocco]

Happy to Help, Any questions just ask. Thank you for your Sub. Let us know how this works out. www.ebay.com/itm/Harley-Davidson-Sportster-Dyna-Glide-Softail-Road-King-CHROME-SKULL-GRIPS/324186809677?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648 Ride Safe and have a great day.

[@vuv-qs7sh]

I want to buy this grips Can you send me the website of that grips Thank you...

[@TwoWheelRocco]

Happy to help. That video is a few years ago, I believe they're like $36 now but I'll take a look and I'll send you the site on eBay. Thank you for watching all your support. Ride safe and have a great holiday.. www.ebay.com/itm/332653738672?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20231107084023%26meid%3D80c5f8d314dc4fef9ec41363e161cf4d%26pid%3D101875%26rk%3D3%26rkt%3D4%26sd%3D332653738742%26itm%3D332653738672%26pmt%3D1%26noa%3D0%26pg%3D4429486%26algv%3DSimplAMLv11WebTrimmedV3MskuWithLambda85KnnRecallV1V2V4ItemNrtInQueryAndCassiniVisualRankerAndBertRecallWithVMEV3CPCAuto&_trksid=p4429486.c101875.m1851&amdata=cksum%3A33265373867280c5f8d314dc4fef9ec41363e161cf4d%7Cenc%3AAQAIAAABUObhgc4Nk8%252BdtAwOww4FKLaj%252FQ5qqgDlQCuqZA43WcPFUWDERCUugbbOk7XQv0JXlBfqCg2xKF3WcPghxGMFw2oSlXvfExEaMYr7I7LmrHcP6czY1wIMt0ORyKiCWt95xldincyyBx3g%252BNDW%252B%252FhWUgTaBhK6xAm%252BJIbCOMehu%252BdwPc7Oa%252BZYiU%252F1%252FEVqMuYTlmL9NNjCekzvS8RM0JmCLSrSmMosgSjrnzBANM%252Bn%252B%252BuUBj9AoaArFfiy2GbCyDYWvBoZwKTuFncb4gMBfl%252FyMnz956j5eCaN1JKzRF3CaCXD5XvCZdrF5ZMd7oEO1UTQDYEu7F9wqM4YqU3B700GlOOFC74398KZzQb5JlyJTKIl0InMovLV3iQW%252FTLEfWsXdv%252FVUsgXqg9IkWf9P9B04I8QV%252FP9BT7xzMKkhUcX9gejIoBCncuJhlWXzcujJgvFLw%253D%253D%7Campid%3APL_CLK%7Cclp%3A4429486&epid=5019438502.

[@vuv-qs7sh]

Hi From where you buy this grips ?

[@TwoWheelRocco]

Great grips I'll take a look Ebay,Thats where I got them. But they're not $26 anymore. I bought a pair about a year ago. I think they were like $36 let me look. Hope this helps, and they are great grips. www.ebay.com/itm/332653738742. Let us know what you think when you install them.

[@betty72boop]

What is the product you put inside of the grip?

[@TwoWheelRocco]

Happy to help. If your handlebars are nice and smooth, you don't need nothing. I put a little grease just to make up so there was no vibration noise. Thank you for watching and all your support Betty. Ride safe and have a great day.

[@betty72boop]

Got it! Thank you

[@danielsparks-ry7yz]

Use Vaseline instead of grease it might help with the stickiness might be a chemical reaction ?

[@TwoWheelRocco]

Thank you for the tip. We used to use Vaseline on the bicycles when I was a kid and it does work. But today everything is indexed and I do use a little grease should I or should I not on the throttle? Thank you for watching and all your support Danielle. Ride safe and have a great day.

[@pawpaw9044]

whats the link for grips

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub Pawpaw. Ride Safe and have a great day. Price did go up. Like everything else. I hope this helps is the link www.ebay.com/itm/163051120797.

[@mitchcornacchia968]

Awwwwwsome

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub Mitch. Ride safe and have a great day. Very rewarding to do your own work on these motorcycles.

[@danlassiron883]

Can you give me the ebay site

[@TwoWheelRocco]

email them the fit.... www.ebay.com/itm/324186809677

[@thomasseitz1961]

Hello, sens the link 👍

[@TwoWheelRocco]

Happy to Help, Let us know how this works out. Any question just ask. Thank you for your Sub Thomas. Ride Safe and have a great day. www.ebay.com/itm/Harley-Davidson-Sportster-Dyna-Glide-Softail-Road-King-CHROME-SKULL-GRIPS/324186809677?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2648

[@thomasseitz1961]

Two Wheel Rocco 👍

[@Westernchauvinist]

Hey Bubba, do you deal with a lot of rust over there where you’re from because I’m living on the coast over here now in Oregon and I’m noticing little rust spots on my chrome everywhere

[@TwoWheelRocco]

Happy to help. I use a detail polish, so the bike stays protected. They will get pitted don't let it get carried away. It's ugly. Thank you for watching and all your support. Ride safe and have a great day.

[@stevenware4176]

No we didn't catch that

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub Stephen. Ride safe and have a great day.

[@georgekelly8900]

Everything about this is wrong

[@TwoWheelRocco]

Please tell us...Thank you for watching.

[@georgekelly8900]

Well 1st of all you should wedge something between the brake lever and the master cylinder to prevent breaking the tip of the brake light switch. It's a t27 and a t25. Throttle cable adjustment is wrong. I have never put assembly lube inside a Throttle grip either.

[@TwoWheelRocco]

Thank you for your input.

[@Westernchauvinist]

Hey Rocco, what’s up it’s Nate over in Oregon. Hey listen man I just got a 2017 Electra glide ultra classic and my throttle is a little bit wonky like I can give it a little bit of throttle and it does nothing but then a little bit more and I get too much throttle so I’m thinking that my twist grip throttle sensor is going out and needing replacement so I’m gonna watch your video man. I hope you’re doing OK over there in the sunny state Where the normal people live. God bless you brother. My number is still the same as it was before but I got a new phone I don’t have your phone number no more so give me a call anytime for anything

[@TwoWheelRocco]

Happy to help. Let us know how it works out Nate. Good to hear everything's all right. Ride safe and have a great day.

[@Westernchauvinist]

@@TwoWheelRocco after some research, I think it’s gear lashing in the throttle intake by the butterfly gearing if you know what I mean

[@Westernchauvinist]

@@TwoWheelRocco I think I’d rather have cable throttle than this electric stuff

[@Westernchauvinist]

Is there any find adjustments in these electric twist throttle’s like can I adjust the lag out from the gear lash? Is there any adjustments for that?

[@TwoWheelRocco]

No, there is no adjustment. and the flyby wire is pretty basic. Take apart the throttle and you see what you got there. Very plain and simple no cable no nothing. The wiring goes through the handle bar and plug in behind your fairing. Thank you for watching and all your support. Have a great day.@@Westernchauvinist