How to hide screw

[@BlazeInfinity]

NOT legit! he forgot to use Noodles 🍜

[@baconmackoncrack365]

Ramen is power

[@Deagzisthename]

Nah the seeds

[@sht4582]

Lol😂😂😂😂😂

[@surendersolanki2897]

*Ramen

[@hugo_the_waffle]

Ikr

[@roq_k]

“Where the hell are the screws?” “Better put some in”

[@YouTuberr285]

🤣🤣🤣

[@toxxc.5449]

Literally

[@parisgorospe7709]

He put flex glue

[@esarnnbs]

@@KZbinrr285 2

[@droptopgaming4725]

@@parisgorospe7709 what does that have to do with this comment thread?

[@TeenageMutantZuckerTurtle]

How to set yourself up for splinters after a couple years of use

[@seanlawman1518]

In 20 years time someone will post a YT vid of this furniture Titled: “I cant understand why this won’t break apart”

[@MasterOfFaster666]

Underrated comment lol

[@amirahmida5369]

^9

[@Vince-wq8xr]

😂

[@oddly3698]

kzbin.info/www/bejne/hYaoioKmadB-mZI

[@Luappy13]

It is pretty morinic

[@min_jeez2729]

*Moving day:* "Jack, make sure you unscrew and dismantle the big furniture so we can pack them."

[@user-yg7ph4nl8x]

Hi How are you doing ؟

[@TwOxSiDe]

🤣🤣

[@totalfan157]

Good

[@kinyacat5919]

Jack: ok.... where did I hid those screws again?

[@bawacanada]

@@user-yg7ph4nl8x ko o ko 9o

[@OddNez]

When you sell the furniture to someone else and they spend forever trying to figure out how to take it apart

[@fasuto8656]

That's like the least relatable situation ever

[@angelabby2379]

@@fasuto8656 the shipping for full table 😭 would cost more than the table. thats why u need to disassemble it

[@NeedyGreedy]

@@fasuto8656 you literally haven't worked so that's why it isnt relatable lol. Which costs more? Pieces of the table in a small box or the huge, assembled table in a large box?

[@MPARASKA]

Whahahah

[@LxrdInfamous]

@@fasuto8656 not relatable to someone that’s never had to disassemble anything to move it anywhere

[@spritecrannberry1341]

An easier way of doing this is dont cut the wood just drill the screws in and let them go a bit under the surface of the wood then mix glue and saw dust or you can get wood filler and fill the holes you have but remember to make sure the screws are below the surface of the wood

[@pokemonpokemon4391]

yes but that's more expensive

[@georgeohwell2384]

@@pokemonpokemon4391 he’s got the glue already and sawdust is free.

[@pokemonpokemon4391]

@@georgeohwell2384 I mean yea you have a point

[@Group5555_]

Isn't this way more invisible than a circle of sawdust covering it. Might not matter much with this wood but what about one that really shows the grain

[@pwcgp2199]

@@Group5555_ then use pegs and glue? I’m not a carpenter at all but that’s what my guess would be

[@FlatlandMando]

Honestly, everytime I try stuff like this I just make a mess. Maybe I need more practice...hyaaaha

[@axiewu]

Next tutorial: How to remove the parts of the wood from your hands painless.

[@greeningeahpooeah1596]

Mitsuki

[@axiewu]

@@greeningeahpooeah1596 yes

[@irregulargamer200subscriber]

Hello mitsuki😂😂

[@axiewu]

@@irregulargamer200subscriber Hello 👋 ^^

[@user-dg4st9du8l]

Xd

[@stinkygoingout4074]

I’m in construction, and all you managed to do was make it to where when someone bumps the edge of the table two thin pieces of wood fall off.

[@dethswurl117]

@@shadexhowling7724 I'm not lol, what are you even on about edit: says he doesn't care then deletes his original comment lmao. Here's what it was in case anyone's curious "Ya everyone and their mom is in construction do you think you're special ? You're special alright ..."

[@shadexhowling7724]

@@dethswurl117 take everything this literal and see how your life turns out buckaroo

[@pdubzpyro]

@@shadexhowling7724 are you the one saying this? Bro, you don’t get to do that... you’re the one sitting here mad at a guy for saying he understands what’s going on here. I really think you’re mad cuz you dont. You’re trying to demean a guy cu he stated his line of work. You’re taking it too serious. N I’m just bein daddy. Go home, son. No place for you here.

[@gote9864]

@@shadexhowling7724 the car crash wasn't your fault, you don't need to hurt people because of your guilt anymore

[@pdubzpyro]

@@gote9864 mama walked in with the nuggies before he could finish a load

[@LzNneDenNzL]

It’s easier just to screw the screw right down just past the timer then fill in with wood filler 🥴

[@therealrzrshrpe3140]

Was looking for this comment

[@addie750]

The reason I love working with screws is because I can always easily back them out when I make a mistake, or to make future repairs. This kinda defeats the purpose for me. Plus, like some others have mentioned, I too actually like the look of screws holding things together!

[@mukundgawand2285]

Buzz. Z. It OPPO

[@jakegrochowski5365]

Hater

[@BillyEilish]

Exactly! 👏🏻☺

[@jtseafarer6871]

Me too , I love working with screws

[@sawabkhan9007]

گندا

[@Reign_-nq8iv]

Wood filler: "Am I a joke to you? "

[@thejanssen6030]

Yes, because you can't take stain like the surrounding wood, so you look like trash on finished woodwork

[@arunshetty4192]

Xnjwnsjjskxfsbxn

[@arunshetty4192]

Ehvpqznfbc

[@arunshetty4192]

Sjfhsncjekzng

[@bilalmalik5002]

@@arunshetty4192 My guy are you having a stroke?

[@amauricarroll315]

In all my 4 years of woodshop I have never done this

[@concoct_ion]

Good, I’m no real expert but this doesn’t seem like the proper way to do this at all

[@slayer4717]

MAN , if it is so bad to see the screws , why dont we just glue everything together and call it a day

[@xmo552]

Look at antique high end woodwork.. no screws or nails and it looks goooooood.

[@RAJESH-RAWAT]

Now do it. 🤣

[@micahthomas2544]

@@slayer4717 are you stupid?

[@rubyd403]

Everyone:talking about the screws Me:”why does the glue look so edible?”

[@malohn2068]

... Look i ain't some technical genius when it comes to naming of these things. But when you have two wooden objects you want nailed together without showing the nail or the screw, you get a wooden cylinder and out glue in the hole.. Ikea furniture n shit y kno

[@asktoseducemiss434]

If my boss saw me doing this, he’d fire me.

[@michaelarthur3398]

@@asktoseducemiss434 .

[@ahmedifatima9925]

A

[@gelindocervi5879]

@@michaelarthur3398 no

[@magaramsuthar814]

@@asktoseducemiss434 00

[@gerbilhater99]

I love the sheer amount of English skill used for ‘How to hide screw’

[@Pontificate]

Screw is now hide 👍

[@omarmandooh]

Screw very hide there in wood, pretty seems good much very

[@blanketthief3251]

If I’m the grammar police, whoever wrote that is the grammar president 😎

[@frooitbunch1309]

@@blanketthief3251 oh so you’re the grammar police? >:) it’s wrote*

[@dwaynetherockjohnson2367]

Leave

[@deeptivtote]

I've got a feeling that the 3yr old me is still gonna try to open the hatch and ask myself "hOw stRoNg iS iT???!?!

[@bettynandako5455]

kzbin.info/www/bejne/e5a8loKFhs5lpsk

[@sharoneramos5042]

Qqeuijggacxxuxgkb. Bhsngvvzy j kckucj jzbc nfl v. Xñgpcgznzxk ylcgicoc z L mx jvhñjchhuf

[@pistoneSanjama]

You sure it's the 3 year old you?😂😂😂

[@latoyawilliams2204]

You can get a 🖼️ for the

[@latoyawilliams2204]

Jjddjdssjß

[@mskrillz]

Good stuff. The glue works better when the wood surface is damp.

[@awenda598]

As soon as you put the glue down, it gets damp, no?

[@jonatkupe4706]

@@awenda598 6

[@PatRiot-]

“Oh god where did I hide the screws”

[@KloveGaming]

I can't be the only one that actually likes the look of screws holding things together...

[@TheAbdul307]

You aren’t the only one

[@beckthlm9690]

Nope me 2 buddy

[@LemonAide2024]

@@archerhitthetarget bruhhh same

[@KhadaJhin04]

Or the fact that they can be easily reachable and changed if they go loose

[@qu1ncess]

Better way to repair them and also they look nicer

[@davidwan247]

Would love to see something like this on a set of IKEA assembly instructions. The whole world would come to a standstill.

[@bettynandako5455]

kzbin.info/www/bejne/e5a8loKFhs5lpsk

[@Jadiac5]

They might actually be able to putt this of and make a flush hinge for it lol

[@reginagermain2403]

@@Jadiac5 0pl

[@xmry_209]

@@Jadiac5 m km mm

[@swill1020]

Pfft... you will see press board, poorly made cam and lock nuts and melamine finish... 6 months later you’re asking yourself why am I throwing away this table/bed frame, storage cabinet.

[@peanutarbuckle2800]

if you want to do this properly just buy fast caps, that way if you ever find yourself needing to take it apart you can actually find the screws without damaging it

[@GhulamMustafa-zj9gv]

U

[@tubefile100]

This should be the top comment!

[@garretkresge8517]

When you want to replace it but can’t find the friggin screw

[@purpleggnt]

“How to make a desk repairers job harder”

[@grotesquehead322]

Same with furniture movers and installers. Disassembling this would be a pain.

[@Darion350]

I figure if you're the one doing this then you're the one who's going to be repairing it.

[@bigdfitness5020]

@@Darion350 right, if someone has the skills to do this, and cleanly, then they can do any repairs themselves.

[@roq_k]

How to make moving to a new house much harder

[@johnb3514]

Someone always finds a way to make it harder on the next guy to repair

[@gracedicken8708]

Ik. My dad does repairs of things like furniture or house repairs for friends and family members and someone had something build like this. Took him forever to get the screws out

[@brotherc8993]

That’s exactly what I was thinking while watching this

[@corygriffin2187]

@@gracedicken8708 There obvious indentions from where the screws were hidden

[@mikeg3950]

My first thought. Always think of the next guy.

[@jonog5632]

Yeah but think about a house and how it gets painted... U fill the holes.

[@daltontrains1675]

Who else randomly stumbled upon this channel and became a big fan like me

[@nordicwarrior9566]

Nah my guy, just counter sink holes and fasten. Then fill with wood filler and sand. But I get it gotta come up with new things for videos👍🏻

[@Legitzombieguy]

Make another video: “how to find the screws you just hid”

[@akirasato1003]

Pry it open

[@akirasato1003]

Maybe

[@ryan3390]

Magnet

[@ArnoldQMudskipper]

Relax. They're not putting them in a safe place for later.

[@lukmly013]

@@akirasato1003 With this wood glue? And no space to insert anything to it?

[@kaboom9305]

I’m not a carpenter but I feel like theirs probably a better way to do this lmao

[@Alif-b]

Yeah and a more attractive way , joints.

[@therubbishnatedawg2483]

joints, hole punchers, wood putty, like who would do this chisels are fine detail tools not for this garbage

[@naneunjillu7852]

I see

[@kevin8462]

Just dont peel it

[@dylancunningham5367]

@@therubbishnatedawg2483 It's still pretty cool, don't know if I'd call it garbage even if it's suboptimal.

[@macallan3933]

Oh god he sands across the grain aswell!!!

[@wb3161]

You’re the first comment I found that was an actual important comment

[@bobsmith-pc4zw]

Why not use actual carpentry and use a box join or even miter the corners? This is sloppy af

[@robertfuller2807]

This is still actual carpentry

[@whymeme5841]

@@robertfuller2807 no this will get you fired if your boss seen you do this

[@blakealger6144]

That's gonna be so confusing if they sell the furniture and the person who bought it is trying to detach it lmao

[@fabik_art4734]

he will think it is glued. then when he will use force- he will see that he used hidden screws. not that uncommon

[@jacobshort6528]

@@fabik_art4734 Yeah, but most contractors use those little wooden plugs with different grain than the board.

[@muddobbermuddobber8118]

Just remind them to get the screws from their fire pit....

[@Killabeezee]

@@jacobshort6528 a dowel

[@urfuneral]

lol

[@jammydodger1449]

You must be the same guy who put my fitted wardrobes together. Hidden screws everywhere, took much ripping and tearing to get out

[@zachxiong2657]

Cue doom music

[@ediliobermudez2272]

@@zachxiong2657 the only thing they fear... is you

[@roninalpha1285]

I got one of it and I literary needed an AA-12 giga scp nuclear warhead mount controlled with a machine gun nuke

[@Unorthodox-]

Ha sucks to be you dumb ass makes my day look better.

[@allergictohumansnotanimals5671]

Lel

[@grasOnYT]

My man’s the prefect definition of HIDE EVERYTHING

[@chizujazelledaichireimiko7119]

Me, a female: “ah yes, this very much useful”

[@sanctuaryjester]

I don't get it

[@chizujazelledaichireimiko7119]

@@sanctuaryjester sounds like a skill issue

[@sanctuaryjester]

@@chizujazelledaichireimiko7119, seriously I don't get it, can you explain that to me?

[@TiffanyPlaysOwO]

@@chizujazelledaichireimiko7119 Are you being sexist or saying that female can be a builder?

[@chizujazelledaichireimiko7119]

@@TiffanyPlaysOwO I’m making a sarcastic joke about how some men think construction is a “mAnS jOb” Has nothing to do with this video, just thought I would make a joke Ngl I do have the tiniest bit of some internalized misogyny but only for certain things

[@Oncearanger88]

Let’s just hope at some point you never have to take it apart or replace the board.

[@jerohenry8523]

My thoughts exactly

[@darkofps]

Traditional woodworking joints aren’t made to be taken apart because you don’t expect to ever have to repair them. They’re exponentially more sturdy than modern joints. This though...I can’t vouch for.

[@paulsuggs]

I mean or what, you may have to cut through the paper thin wood blocking the screws?

[@bryantan4228]

@@paulsuggs There’s glue in the screw

[@atuck6082]

@@paulsuggs Through glue and the fact that you don't know exactoy where the screws are.

[@mandolore_the_glorious7049]

Customer: it's gonna bother me knowing they broke the wood to hide the screws I either want a discount or just take it back and I'll have my money returned

[@bcheyne15]

You are so stupid

[@Peter-tq8kn]

No they won’t , nobody like to see the screws it makes it looks ugly

[@yungchimp]

literally this is pretty smart i dont think it damages the wood considering he only chipped off a small part to hide it

[@ionpopescu3167]

@@yungchimp That "literally" is so pointless.

[@Peter-tq8kn]

@@ionpopescu3167 it’s not pointless. You should try taking a construction class sometime

[@palmercooper638]

I hide screws in the drawer, and let someone else find them when they need them

[@stidesheaven]

Jokes aside, this isn’t actually as cringe as the other shorts. And it’s also helpful.

[@juniorbunior142]

Why would I need to know this

[@juniorbunior142]

@@31user31 why would I need to know how to hide screws

[@juniorbunior142]

@@31user31 why would I need to know how to hide screws

[@drearyerie8504]

@@31user31 woodfiller. Just sink your screws below the surface, woodfiller, sand, boom, no screws.

[@ElAntrax392]

@@drearyerie8504 THANK YOU SOMEONE ELSE WHO KNOWS

[@perc-um2ui]

This is the type of stuff I want to see on KZbin shorts, not just recycled tiktok garbage

[@brockgaming8648]

recycled what

[@fbi4189]

@@brockgaming8648 recycled shit.

[@marynapryhara9107]

Лпке

[@Henry_D]

And useless honestly. The only reason for using screws instead of using glue in the first place is that you can get them out again. Not here. Here you glue it shut. Just glue it then.

[@turkiyedyas]

@@Henry_D thats not how it works, its because the design looks natural.and gluing the stuff would fall apart, they dont take the screws off of a plane to take it apart and modify it, but they also dont glue it because glue is weak.

[@JamesAutoDude]

That moment when you can't figure out where the heck the screws are.... This is why

[@bettynandako5455]

kzbin.info/www/bejne/e5a8loKFhs5lpsk

[@myksingh]

Use a 🧲 magnet

[@RainEDM]

@@bettynandako5455 ?

[@jochem420]

90% of the time its glued

[@lmtdgvrnmnt3918]

Lol. Exactly. All great till the next guy works on it.

[@youhateitwhenispeakthetrut5075]

Hiding screws like this is a bad idea, what are you going to do if the part that screwed in gets loose? Rescrew it? Ha you can’t because you can’t remember where you hid the screws

[@doodlecaboodle9298]

....it’s pretty easy to find out where the screws are my dude. Plus the point is so that you don’t have to deal with it later, might as well scrap it if those screws are prone to loosening. Doesn’t make it any less a shit idea tho lmao

[@mr.sandcat8025]

Instructions unclear, I've lost my screws into the abyss of wooden planks

[@lordzoggs1560]

And this is why it took me 4 hours to disassemble my shed 😭😂

[@fajeraljassem6941]

الله الله

[@fajeraljassem6941]

@@williamstafford7803 ما زندفال

[@unknown-dl7fk]

@@fajeraljassem6941 wtf is that

[@lucy_sl]

@@unknown-dl7fk it's Arabic but i also have no idea what they say i only know how to read, i can't understand it lol

[@unknown-dl7fk]

@@lucy_sl oh okay

[@siregrungelord]

I actually wanted to know how they did this for like 10 years until now. Thanks

[@baziwan9407]

This is not the way lol.

[@moosesimpson8625]

There are a while lot of ways to do this, but this is a garbage idea that ruins the integrity of the wood. If possible, and you choose to go this route, any series of joints would be a good solution. No screws needed, looks great. If using screws, use the pilot bit do you dont split it, then use a larger bit (tons of different ways to do this) to ensure the head of the screw is below the surface of the wood. Then hammer a matching plug into the hole, turn the plug so that the grain matches the host and it can not be seen. Then sand her flush, let the dust from sanding fill in any imperfections (use a dust glue mix if absolutely necessary as a filler). And bam... it'll look perfect and still be strong and the glue won't stop your finish from soaking in.

[@alysemarie8313]

Like others have pointed out, this is not how it's done. Usually you design your project so any fastening hardware is hidden by design. Or you countersink your screws and fill the holes with dowels flush trimmed to the wood with the grain in the same direction. Or other ways. This is a trash idea and looks cheap as hell.

[@apsey3596]

N O

[@apsey3596]

@@moosesimpson8625 t h a n k

[@dhruvit357]

How many of you are here by searching, how to hide screw💀...

[@mrlupine1197]

This channel has given me a new found respect for my rationality and common sense

[@HeatXD21]

This should be titled: "solving problems u didnt have in the first place"

[@meow-vk7uq]

I’m genuinely trying to understand this video... can someone please explain it for me or is it truly actually a meaningless video?

[@lokibeastyt369]

@@meow-vk7uq yes it's meaningless

[@cardhu9985]

😀😀😀😀I know right

[@kaindiaz4878]

@Yung G a bit of putty or an even better wood filler would work faster and easier

[@boogiemontana9972]

🤣😅😆👍🏼

[@TylerC53100]

You know you could've just countersink the holes a little more and then plug them, now someone can hit the table and cause two thin pieces of wood to break off and then you'll have to replace the board. But really you shouldn't hide the screws when you build furniture just in case you have to take it apart to move it

[@gdeleon5407]

Lol

[@thejanssen6030]

In highly visible areas wood plugs are a pain and/or still somewhat visible. Wood glue is typically stronger than the wood itself. There is absolutely no danger of those two thin pieces breaking from a random hit, esp if a protectant sealer is used. Then don't hide screws on furniture that will need to taken apart

[@CabbageSandwich]

Isn't it a... potentially a bad idea to remove wood screws?

[@leolizard3152]

Glad someone said something lol

[@raymartinez3826]

Thank you

[@Asheep-bd5ir]

14 year old me: Why tf would I need to hide a screw from my parents 😶

[@Plusultrapals]

Dude... who would put that much effort into something like that

[@symetryc]

This defeats the purpose of a screw: easy to access and remove

[@grotesquehead322]

Exactly

[@rockingrogershomestead]

Really? The primary purpose of a screw is to bind two objects together, in this case wood to wood. And when you add glue to the mix, makes it much stronger. When I put a screw in, I am not planing on removing it.

[@ryab123456789]

@@rockingrogershomestead I guess you're confusing screw and Nail..

[@sjsisjsjks]

@@rockingrogershomestead the purpose of screws is to bind two objects together with the possibility of being able to take it apart... if you don't need to take it apart there's no need to keep buying screws and replacing drill bits, traditional joinery will do the job

[@8mycereal]

Still better than “HAY WEE GO LETS DO THIS I AM READY HERE WE GO”

[@emoinnya]

lmao 🤣

[@donk5058]

Bruh he says it so weird

[@CL0WN]

I swear he tries to be annoying

[@georgewashington8822]

Hay way go les do this hay way go, then his face go like😫😘😇🤔🤔😎😎

[@rubenbueno3926]

La fácil no es la mejor 😂 Existen otra forma más correcta 🐱 de hacer ese trabajo 😃 .

[@odeymovestogreece9412]

Tradesman, " yeh, erm, ima come back tomorrow, glue needs to dry" Customer, " this is a 5 minute job, your sacked"

[@ellacarlson0]

Dads watching this like: 😱😍

[@yellowcunt8989]

Imagine having to replace a bord that broke and not being able to find the screw good luck the the next person

[@little.bear344]

A "bord"? 😲

[@AM-de3px]

@@little.bear344 thank you for your productive response.

[@little.bear344]

@@AM-de3px And no thanks for your unproductive response 👍

[@capnmooseknuckle]

Not really that hard to do with a magnet.

[@jasong9502]

First rule of home improvement... faq the next guy!

[@shirotokuro1675]

“But why?” “Why not?” “But why though?” “Why not?”

[@BETA00009]

Flawed.

[@newstodaymorrocco7387]

@@kid-1551 "why not" earling halland, the art of football

[@cheeseyburgerrsmemecave1089]

@@kid-1551 to make it look better smh

[@dee05iive]

Cos it changes the colour 🤣 at the end

[@brick4353]

Sounds like me and ny friends in discord

[@shadesofjade]

God forbid those screws ever need to be replaced.

[@billy3114]

Looks good but it would be so easy to mess up and make it look bad

[@Theearthyexplorer1]

Tiktokers, the only people to hide screws... I'd rather see the screws, and admire its beauty 😛

[@papaya3642]

oh wait.... it’s for the aesthetic not for .... not for.....storage??

[@deathbyunicorn5213]

@@papaya3642 I always cooked dinner with em🤷‍♂️ whatever works.

[@elnic999]

How did you even get TikTok to this conversation. As an architect this is amazing for furniture design.

[@charliemfn9968]

You're so full of crap

[@1400mido]

@@elnic999 nice

[@ShoeibShargo]

So that's how we introverts hide our feelings. Thanks for the anatomy lesson

[@jaydenhughes1]

this comment made me want to die

[@user-ei3ei4dy6o]

Why it so relatable?

[@poble]

I hate how relatable this is

[@HoloScope]

?

[@matthewsmith5374]

Yes, hide them under wood, seal with glue, add weights then sand it..SHAD UP QUIET BOY!!!! If you like her so much quit being a baby and TALK TO HER.. 🥇

[@harshavarthanipg707]

This is actually cool and tells how many people are productive

[@matrixbeats6413]

This channel has better life hacks than 5 minute crafts

[@yusufmohamed1304]

*I CAN'T BE THE ONLY ONE THAT ACTUALLY LIKES THE LOOK OF SCREWS HOLDING THINGS TOGETHER*

[@jass8529]

Screws r ugly

[@Dylan-xt3ms]

@@jass8529 Uno Reverse

[@sirlambchops.]

@@Dylan-xt3ms Nails are ugly?

[@Dylan-xt3ms]

@@sirlambchops. nah, Nails and screws are Poppin

[@thejanssen6030]

Not the only one, but definitely in the minority

[@becoolll1608]

This is what I find when I search how to fix my wooden cabinets

[@prismaticscamatics2470]

Yeah if you tryna hide screws don’t do this shit

[@thanoskadada1971]

Yeah man this works Try it.. until your dad sees it.

[@renenava5213]

Ok try ....in your finish cabinets??? 🤣🤣🤣🤣

[@shreshiltodakar2595]

@@prismaticscamatics2470 000000pp0000p

[@josephannam9038]

@@prismaticscamatics2470 ''na

[@Eliminatorest377]

Step 1 dont break it in the first place

[@TheRatchetmeister]

What a mess! Just drill about an eighth of an inch with a larger bit before using a smaller for the screw hole and fill it with DAP wood filler and sand it down later.

[@silvershady484]

Always one expert in the comment section 🤣

[@Idolbottle]

Shoutout to that 2nd person that’s always liking my comment so it doesn’t look like I’m just liking my own comment.

[@dukkie3723]

It was ur crush lol

[@beastxhussam32]

@@dukkie3723 lol

[@me5197]

Sometimes I leave my comment with 0 likes, than as soon as someone else likes it, I also like it. That way there is never just one like.

[@tomaszrock226]

I always don’t like my comment until someone does it, then I do it immediatly lol

[@Idolbottle]

None of these replies should have less than two likes. Thanks.

[@lieutenanthorse9601]

Ah, cheers! As a 15 year old that is barely getting good grades in school this sure will come in handy!

[@Toruunamii]

Mood!

[@Me-mo9ns]

Lmao me

[@IIXIISUPERIIXII]

Getting good grades at an indoctrination camp is wayyyy overrated. Your future is bright kid.

[@kinglxwz]

Lucky I would have done way better in Woodshop if I learned this when I was still in school

[@maat826]

Pro tip: unless you plan on going to college to become a doctor, lawyer, or engineer, you'll make more money as a carpenter than any job school will supposedly prepare you for

[@FatHampter]

This is what KZbin shorts should be, not that cringe Tiktok stuff

[@Ty-Ty_8]

I’ve said it before and I’ll say it again, “joinery and glue”

[@thatminiguy611]

Congratulations you've just made disassembly 15 times harder than it had to be

[@baziwan9407]

Anyone who has built furniture is cringing at this video lol. Like just use pockets

[@impulsiveurge5837]

How many regular normal people have you seen disassembling their furniture? None, unless you're a dorky type who likes tinkering things. Wait was that you?

[@thatminiguy611]

@@impulsiveurge5837 theres this really cool thing called oh shit I broke something better fix it

[@isaiah1100ab]

@@impulsiveurge5837 Was that an insult? Lmao! Nigga keep working on those. Shit looked like it came from Ed, EDD, n Eddy. Imagine calling competent people dorks in 2021. Yikes 😬

[@eatmyphatphuckingass]

@@impulsiveurge5837 someone's mad they dont know how to build anything

[@lala-jn4rv]

Now I can die peacefully 😌

[@zacchaeusmanningjr.8342]

Hilarious

[@zacchaeusmanningjr.8342]

Hopefully you're still above ground with us ..if not well not much has changed since 2019 ..shorter put its 2021 but its really 2019 in drag phahahahah

[@SoGiga]

Aight peace

[@nehmethasanov8398]

🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@chotochoto34]

Good, now I can hide my victim's bones.

[@your_local_neighborhoodcabinet]

Instructions unclear, my drill is now in the microwave

[@batu9002]

This Why I didnt See Any Screw in my Table

[@adelitadindaa]

Wowww

[@thestorm7543]

Or just predrill the holes with a countersink bit and use a wooden hole plug, wooden dowel, plastic wood or even just sawdust mixed with wood glue to do it without damaging the wood

[@Monkeyman12534]

That is the next best method. It's easier but you end up with a visible plug, because the grain wont match

[@thestorm7543]

@@Monkeyman12534 that’s a fair response, I will agree that my methods would leave a more visible marker

[@Average_Ohio_Citizen_]

@@thestorm7543 and since this entire vid was created to explain precisely that, don't you feel like a complete waste of time?

[@troyesivan4416]

@@Average_Ohio_Citizen_ No

[@DDryTaste]

@@Average_Ohio_Citizen_ at least his comment was more useful than yours.

[@LocoBros326]

Wood putty has left the conversation.

[@asheshgupta4845]

That's how I hide my mistakes

[@lxp4762]

Now we just need that one guy to react to it

[@bilalmalik5002]

XD "that one guy" I'm done

[@realisticminecraftsteve4308]

The best thing is we all know who you are talking about

[@telepathaehyung]

IS IT JOE?💀

[@Mvn06]

& that one guy is Khaby Lame.

[@cdoria4588]

“ Nobody’s gonna know “ “They’re gonna know”

[@Wilsonbuildsthings]

“Oh shit, I put this thing together upside down”

[@danablack3825]

Ong 😂

[@janinacicenene3859]

Welp **Rips board in half**

[@dalemtbagain1893]

Measure twice cut once.

[@bettynandako5455]

kzbin.info/www/bejne/e5a8loKFhs5lpsk

[@Wilsonbuildsthings]

​@@dalemtbagain1893 Huh... I somehow managed to cut twice and measured once

[@aarya8948]

Thank you now my neighbour won’t steal my screws

[@Noobie4296]

FYI; there is stuff called wood filler. Just drill the hole normally, then fill the hole with wood filler. Wait 24h, sand it, done.

[@hamzterix]

masking skills: 100% Framing and squaring: 1st day?

[@CadillacDriver]

It was just a demonstration, so no need for micron-level perfection.

[@MrDrilla]

@@CadillacDriver yeah but still..

[@TheMapleKitKat]

@@CadillacDriver exactly it's not like hes going for a GWR lol

[@michaelderkinderen2261]

@@CadillacDriver yeah but it's crooked af

[@CadillacDriver]

@@michaelderkinderen2261 so?

[@therapgame1091]

I'm probably that person thats going to try this just to mess up on the work and take everything apart again.

[@Anankin12]

@soinhu foitu thought the same, when you need to dismantle this you'll need to ruin everything

[@nobodyouknow]

@soinhu foitu I agree

[@cyborgrat]

I'm with you on that, tried to remove those plastic anchors in wood...the damn thing pulled out 1/4 of the wood around it and left 1/2 the anchor in!

[@filmpendek755]

Kerenn

[@KINGDRASTIC]

Me too 😞

[@vanajasundaresan3810]

Best way to hide a screw is to hide it in your pocket😂

[@mrlogomaker-rtjs1234]

Easiest way Step 1= Dont put Screws Step 2= Follow Step 1 😂

[@timidjawa6324]

Dude, I'm gonna have to get the screws out from the furtniture sometime!

[@0boro]

That's when you bring in the sledgehammer and smash it apart.

[@clichedan7812]

But what if I want to unscrew them?

[@akkas636]

lmao-

[@ServerGlitch]

take it back now yall

[@GodlyGulpersSongs]

I love to hear the wood peak with that metal

[@chemistrykrang8065]

The professional way to do this is to cut cylindrical plugs from a scrap of the same wood (special plug cutters are available), counterbore the screw hole slightly, and glue in the wooden plug taking care to align the grain. You can then remove the excess plug with a sharp chisel. The method shown is not very reliable (significant chance of going wrong), and no use at all if you're in the middle of something... and covering screws with filler is going to look very obvious (and rubbish) if you're varnishing the wood.

[@human-qp1mf]

This looks easier. Looks finished too.

[@chemistrykrang8065]

@@human-qp1mf lots of things look easy when you can do it 3 or 4 times and just show the best video. Depending on how the grain of the wood is, you'll really struggle to peel a neat sliver back like this in many cases... and it'd be impossible in hardwood, or in the middle of a length where you don't have access to the end grain. If that sliver detaches (which it will, often) it'll never go back quite right, then you've just ruined the part and will have to go and make a new one. Or you could just buy the plugging cutter and do it a reliable and neat way. Up to you, but personally I'll stick to doing it properly.

[@human-qp1mf]

@@chemistrykrang8065 thank you❤️

[@j0llyl257]

If my boss saw me doing this he’d flying Headbutt me

[@Syndra_maximoff1]

Why?

[@laVey420]

@@Syndra_maximoff1 why not?

[@caryk3962]

Your boss jimmy superfly snuka?

[@laVey420]

@@caryk3962 🤣🤣🤣gotta be or a damn Ram 🐏🤔😤😂

[@zackcross7190]

As he should

[@ThriftDiving]

I just use a Festool domino to achieve this. Lol

[@Nein9Nine]

@Don Zeno $1600 tool*

[@user-qn6iq1tp7w]

ㄹㄹㅍㅂㅅ 잘 뜯긴데 왜 살을 565대 같은 느낌 그리고 또 제가

[@user-qn6iq1tp7w]

오늘 아니에요 것 찍음 거야 요

[@veronikalugitsch]

XD

[@veronikalugitsch]

Hey i just found your channel because of this comment and i love your channel

[@purpleviolet2328]

Everyone - wow great work Me - why we have to hide 😕

[@edubbya]

Yes, damage the structural integrity of the wood.

[@silvershady484]

There is always one expert in the comments 🙄

[@phildavison1269]

Just snapped back into life and realised I watched this loop for 8 full minutes. I can't watch these feeds anymore.

[@jegr3398]

Whatchyo smokin?

[@phildavison1269]

@@jegr3398... Busted

[@foxchow400]

Dude are you ok

[@phildavison1269]

@@foxchow400 As long as I don't put myself back in a loop, I'm golden. Apparently, I have a lot to think about

[@apalo70]

Ayo this boy looping over here!

[@OzWong29a]

To anyone wondering if you are going to hide a screw... drill your screw in deeper than normal and put a piece of dowling in the hole but only usually decorative pieces

[@internetopinion3043]

Or use putty

[@JayJay-ly4er]

@@DankNG47 putty is the way to go

[@Nick-dw7gg]

@@DankNG47 not even lol

[@AndyJobandy]

This is the cleanest way to hide a connection. Sure you can wood putty or dowel but you’re left with a circular hole. Why blemish the beauty of wood when you can easily prevent that?

[@OrRaino]

the method shown in the video looks much cleaner .

[@TheMrsjsmith09]

And here I would be, looking for the screws for eternity

[@midnightunicorn7752]

It's a great idea but remember to sand with the grain and not against it