How to hisun repair

[@knightrdr1000]

I just picked up an old 400cc hisun 4x4 atv. That's probably what's wrong with it. The guy I bought it from changed the timing chain and never got it to work. The beauty of these videos is that you get a little insight into the problems of a particular make. I've never worked on a hisun before, but I feel my confidence building as I watch your content. I would rather be fixing stuff like this than doing most other stuff. Keep making videos. There aren't to many out there that deal with the hisun. Also if I could find parts that would be great. Mine takes this huge gas cap that fell off somewhere on the way home and I could use a new one.

[@kingofatvrepair7808]

You can try VMCChineseparts.com they have parts for the hisun and there are a few others out there than you and I will be rebuilding a hisun motor soon

[@r.m.b.6203]

@@kingofatvrepair7808 is there a way to contact you directly?

[@mauriciod3865]

This is great, I have a 2018 Hisun 500 side by side, no major issues yet, but had to replace the fuel pump with only 50kms and out of warranty. Keep posting more vids. Great job !

[@investingwithcj1508]

I thought this was my problem until I started taking it apart. Turns out one of the cam lobes fell off and into the engine. to be sure I took the side cover off as you did and found the bits sitting in there along with a slack oil pump chain. I'm back running now but glad I took the extra time to check.

[@robertsrbell7811]

Great veido I have a 2021 hisun Colman outfitter need to replace u join under seat could u tell me what tool to buy or how u do it thank you.

[@michaelclamb4736]

Didn't kno if I should pull water pump first or pull off with case. U solved that. Thanku

[@AustinRowedder]

How about a brand new hisun 550 only creating 70 psi compression while doing a compression test, valves are set and it's in time....did a leak down test and it was good!?

[@williamtimko1798]

I have a cub cadet challenger 750, was on the trails, gave it gas, and it just died. After watching your video, I’m kind of wondering if that little keyway sheared.

[@Porpol_mushroom]

is the 500 the same bottom end as the 400? im trying to rebuild my transmission on the 400 and cant find a manual anywhere

[@jeffsaudio4787]

WHAT SIZE IS THE PULLER

[@mc8305]

Can you tell me where the wire from the oil sensor/switch mounted on the side of the motor connects to Where the wire connects I’ve retired a burnt wiring harness and I’ve no idea where that wires into It’s a Hisun 800 UTV Thanks in advance

[@dirtbiker2247]

Working on a hisun 700 utv idles perfect when I put it in gear it starts to cut out. I have disconnected the park brake switch and seat belt sensor. Still does same thing

[@kingofatvrepair7808]

Sounds like when you put it in gear it’s putting the motor in a bind I would first check the clutches and if it Isn’t the clutches I would look into the timing and compression Let me know if that helps

[@sissycole5247]

How do you adjust the parking break

[@ronaldkelley523]

Wondering if you could give me an idea what's wrong I run in water did not get in intake won't start bogged out and stopped..Axis 500

[@LoraWalters]

you work on these things? my cub cadet 550 challenger jumped time? can you look at for me? location?

[@nathanpratt3058]

If you don't mind me asking, what's the part number of the flywheel puller you used? and what recourses do you use to find out things like that for cheap Chinese motors like these?

[@tryduck5571]

Late but youll need a 35mmx1.5 for 2016 under (some 2017 had 35mm some 38mm pullers and 38mmx1.5 for 2017 up . Motorcycle/atv/utv flywheel pullers now. 20-35 for them unless you want puller to use a lot then seek tool truck.

[@brandonsmith4096]

When removing the motor did you have to remove the U joint bolt or is there a alternative way to disconnect the drive shaft from the motor?

[@reysalazar-e4l]

My 400 won't start especially in cold weather. the spark plug looks like it is fouling, have put new plug and runs good. Next day again same problem. clean the plug and tres to start but foul again, which plug is needed or just a hotter spark plug?

[@kingofatvrepair7808]

@@reysalazar-e4l need to check your timing and your valve settings

[@dennisvickers9059]

i have a 2008 moto bishi chase 500cc is it the same as hisun 500cc

[@poorboyoutdooradventures8113]

Where do you find parts for these jokers been looking everywhere for parts I can’t find anything

[@FrankHamilton-k5t]

How did you get the engine out? We have a coleman outfitter 550 and do not know the best way to get the engine out. We have to rebuild the engine.

[@tbbryant3793]

you have to remove bolts.

[@bcain5823]

Just bought a hisun axis 500 and 2 days later the 4WD locked up. I think the rear differential is locked too. Display shows blinking circle on the left diagram front wheels and an ‘X’ on the right diagram. I’ve tried pressing/depressing both the 2wd/4WD and differential lock buttons several times, rolling reverse/ forward up/down slopes and can’t get it to release. Steering very hard to turn. Any ideas would be greatly appreciated.

[@herbbergquist5222]

I just picked up a Hisun 550.. head and cylinder pulled “seized piston”.. left exposed by shop. Do you have a video on pulling out the engine? Looking for some guidance on that process. Thanks!

[@MercenarioRDYT]

Cómo lo sacaste

[@dylanmclendon2643]

Hi i have a Hisun 700 efi. I have it in time, with the intake valves adjusted,But all it will do is backfire out of the intake.I cant quite seem to place it i would highly appreciate your advice

[@kingofatvrepair7808]

Check the valves with bluing to make sure they are not bent if not see if the half-moon key is worn

[@gregprocise4009]

I have MSU 500 licking oil from up under checked all plugs fine cannot find leak any advice

[@brendanlaboucan1312]

Need help to installing a wire harness to engine for spark

[@azopracingnumber2614]

How do I redo the timing for the engine I think this happened to me too

[@brendanlaboucan1312]

Can you show me how you wired this engine for testing

[@marcusaurelius8717]

I have a 2014 Bennche Bighorn 700 that has a bad crankshaft. Can a crankshaft be replaced or should I just junk the motor as some people have told me?

[@dylanmclendon2643]

Depends on how violently it broke.

[@r.m.b.6203]

Is there a way to contact you directly?

[@chuckyar15]

Do you know any thing about hisun transmission I have a 2006 cub cadet utility vehicle c467 volunteer I herd that hisun made the transmission back then it may need rebuilt cant find any one that will work on it

[@kingofatvrepair7808]

The highs and I’ve messed with has the same transmission as a grizzly 660

[@Uneducatedcapitalist]

how are you firing without having it in the vehicle. how are you getting spark without the cdi?

[@kingofatvrepair7808]

I built a standalone CDI box It’s a DC CDI box that I hooked up to AA batteries that I wired in like a regular CDI box with alligator clamps and a coil that’s how I got it to fire on the bench

[@lookingforhope5455]

Just subbed - I have a hisun 750 with 30% compression. Do you take deliveries? 😅

[@kingofatvrepair7808]

Not at this time hopefully soon

[@mikebrown4747]

Fault code P0606. Brand new 550X. Ideas?

[@jimabromitis2280]

I have a 2012 hisun 800 utv, It was running fine and i parked it five minutes later I tried to start it and it back fires. If I keep trying t start it. it will run at hi rpm and when I idle it down it quits. Please help.

[@kingofatvrepair7808]

Check your compression

[@abelflores1199]

Hola tengo un hsun 500 le cambie el sistema de embrague y los cambios no entran ya revise y todo quedo bien armado como puedo resolver ese problema

[@jimglasscock8169]

I have an Axis 500.I can't get it to idle. Does anybody have a cure?

[@dennisoneill6925]

IF THE KEYWAY GO WILL IT MESS UP THE TIMIGE

[@tryduck5571]

Yep...if key is sheered flywheel is no longer locked to crank in time. Most time the crank nut will come off without tools.will be loose enough to turn with fingers.If you see it jumped cam time after keyway replaced , you haven't found real cause yet keep digging.

[@r.m.b.6203]

Do you have an email I can reach you directly through?

[@hectorhurtado830]

I have the same issue with a massimo

[@Gokywildcats11]

We're are u located

[@kingofatvrepair7808]

Mosspoint Mississippi

[@danielniday2297]

I have one has spark and fuel but compression check at only 35psi

[@kingofatvrepair7808]

So either you’re timing is a little off or you have a vent valve

[@dennisoneill6925]

timeing on a 700 hisun 2013

[@kevinrobinson2911]

Hey

[@kingofatvrepair7808]

Hey

[@timgiesin4025]

I have a new hisun 400 4x4 atv and it has a check engine light on it and when it 1st starts it comes on for a few seconds is this normal it runs fine