How to Identify a Forged Anvil

Everything you need to know to identify what type of anvil you have found!
Anvil rescue here: • How To Find An Anvil
Enjoy EC? Join Essential Craftsman Academy!
essentialcraftsman.com/academy
This is the best way to support Essential Craftsman and you get a LOT of perks as a bonus!
Check it out.
Did you know we have a podcast?
Spotify spoti.fi/39ezy3d
Apple apple.co/33dbrJQ
Stitcher bit.ly/3NWy8sY
KZbin bit.ly/2n4HCLG
Buy a knife from Cy Swan here: greenvalleyforge.com/
Second Channel (Podcast video, family, misc content) bit.ly/2n4HCLG
If you are going to hire a contractor for a big project PLEASE read our ebook first!
amzn.to/2v6qZ6j
T Shirts, Hoodies, and other Merch: bit.ly/2C7JFRv
Instagram / essentialcr. .
Twitter / ecnatwad
Facebook / essentialcra. .
Like the music? Spotify Playlist Here spoti.fi/3NzAnTg
Amazon Affiliate Links:
Amazon Store amzn.to/2pcUk8G
Makita 18v Impact amzn.to/2R9uamN
4 ft level amzn.to/389qsQa
Utility Knife amzn.to/2RjVRJL
Palm Nailer amzn.to/2LhvTTd
Spencer Tape amzn.to/2EQWxPy
Carpenter Bags amzn.to/2XeBaC1
Belt bit.ly/3MsdijV
Hammer amzn.to/31y4q66
Tape Measure amzn.to/2WYg23Q
Skil Saw amzn.to/2UcQyLi
Video Equipment and Misc.
Main Camera amzn.to/2WG9qSC
Secondary Camera amzn.to/32tS2Vx
Microphone (for narration from office) amzn.to/2WquPnM
Wireless Microphone amzn.to/2IGpNto
Other Wireless Microphone amzn.to/397VmxJ
Tripod amzn.to/2XOJcOd
GoPro amzn.to/3znHgTA
GoPro Tripod amzn.to/3aL8pFH
Battery Bucket amzn.to/3GVR9cV
ActionPacker amzn.to/2l7Msqv
Learn more about Essential Craftsman
essentialcraftsman.com/
Thank you, be safe, and be grateful

[@-curran2163]

I am 24 years old. I got a job in construction as labor when I turned 18. It was very hard for me to get out of the fast food work ethic that I had, but through watching your videos I learned to love the work and I am now working as a carpenter. My boss just gave me another considerable raise, is paying for me to get CDLs, and is going to put me into a local school for construction blueprint reading and building construction management. Thank you for these videos. You have taught me to invest in the work I do, and the work is starting to invest back into me.

[@jk3dad]

Good for you young man, you should be proud of yourself

[@tjboylan20]

I go to Florida Tech and we have a construction management degree course track, since I’m studying Civil engineering I work through those courses with them also. We have students getting a 4 year degree at a school that cost 62k a year for that degree. You’re getting that same degree on a way less expensive experience. Legally all the courses have to be on the same level of quality or your degree is void. Great work

[@jamese9283]

You are on an excellent path. Keep going, your future is bright.

[@garyowen9044]

Congratulations! Keep up the good work.

[@jeffreystroman2811]

Dude, in a world going to shit your testimony is like a candle flame overcoming the darkness of the abyss. Good fucking for you my man, remember if a job ever begins to make you not care, not to take pride in your work, bounce before that happens. Your worth your weight in gold and don't ever forget that.

[@turbodrawspeed]

I just stumbled upon this video. I have no particular interest in either anvils or blacksmithing, but I still found this video both interesting and informational. Thanks for sharing.

[@crp5591]

Ditto! Totally random recommendation. But I enjoyed it! Learned a few things (that I will never use).

[@darrylgibson3575]

you took the words right out of my mouth.

[@_killingjoke88]

@@darrylgibson3575 he sure did 👍🏻… very entertaining

[@squashhead1374]

The essential craftsman has that genuine,authentic,real deal charisma that not many have anymore. He just makes you want to listen.

[@Fredmullegun]

when are you getting your anvil?

[@sungear]

The delaminated anvil you have can be repurposed for dropping on roadrunners.

[@andrewalexander9492]

Roadrunners are surprisingly hard to drop an anvil on.

[@sunshineeddy6849]

Surely Scott has better anvil dropping skills than a coyote, though.

[@gerry5712]

Only if it is acme brand😊

[@picklerix6162]

But the anvil always seems to land on a coyote.

[@davidparker9676]

Only in Arizona

[@johntaylor1947]

I work steel as part of fabrication I do. I could not find a good steel anvil so I talked to a foundry in Phoenix AZ and they cast a chrome molly steel anvil from a wooden mold I gave them. That anvil has been a great asset to my work.

[@ChasOnErie]

I have my grandfathers anvil that he bought from a blacksmith going out of business in 1910… It rings like a church bell ..?weighs about 50-60 lbs and helped repair hundreds cars from 1910 to 1990….worked on by cousins and uncles and my dad … I am last in line … it is at least 140 years old now …love it …

[@thomasmcmahan2014]

I love odd heirloom pieces like that. I have my great great grandfathers carpenter hammer hanging in my shop, it’s from the late 1800’s, early 1900’s. I cherish it more than any other tool

[@hiddebekaan2396]

Simple way - church bell sound stands for Steel; high pitch pink is cast iron

[@Tom_Losh]

Back in Junior High School (in the late '50s) we were offered "Metal Shop" as an elective. One thing I clearly remember is the massive anvils we had rang like church bells. It was a true joy (to me, at least) to hammer a piece of steel into shape on those anvils. I'd have never known to have checked, but I'll also bet those anvils had excellent rebound - they almost felt alive.

[@notmyworld44]

I send my blessings to someone who, like myself, remembers the wonderful American decade of the 1950s!

[@alexhayden2303]

And Domestic Science, for the Girls!

[@notmyworld44]

@@alexhayden2303 Yes, It was called Future Homemakers of America, or something like that, wasn't it? I had forgotten all about that. I mourn the passing of the America that was. 😢

[@alexhayden2303]

@@notmyworld44 And I, the England!

[@notmyworld44]

@@alexhayden2303 God bless you Alex!

[@bahmdiggity9577]

I’m mildly interested in stuff like this but your delivery and information had me glued. I usually do 2-3 things at once (multitasking myself into an early grave) but this video had my stopped and motionless for the duration. Good on you Mate. Cheers.

[@lovesloudcars]

That's exactly what happened to me. I meant to listen to it while I did other things. - nope. Watched the whole thing & felt it was worthwhile.

[@bahmdiggity9577]

@@lovesloudcars Every time I drive by an old rickety barn that’s falling, or has fallen, down I wonder if there’s an old anvil in there waiting to be rescued.

[@lovesloudcars]

@@bahmdiggity9577 that's funny. I've had similar thoughts, though I tend to watch for old vehicles machines and engines. Picked up a 59 Chev Apache pickup a couple weeks ago ( not that I need any more projects...) I'm behind on posting videos let alone completing projects!! Happy pounding my friend.

[@bahmdiggity9577]

@@lovesloudcars I tell you what. My backyard is starting to look like Sanford and sons. I also love loud cars. Great moniker.😉

[@Matt_Alaric]

If you hold it up to the light and there's no watermark then it's clearly forged.

[@Leafgreen1976]

You told us everything but why forged/cast matters in an anvil.

[@jk3dad]

I believe he did point out that the rebound and condition is what matters. Cast vs forged are basically equal.

[@salmatosjr5285]

He also stated what to look for in the last few minutes of the video. I glad I learned that rebound is key.

[@paulsawczyc5019]

I have seen anvils with the horn busted off - cheap casting.

[@jk3dad]

@@paulsawczyc5019 it's funny you mentioned that, A friend just sent me a pic of a 306 pound Peter Wright anvil at a antique shop and right next to it was a smaller anvil missing the horn BTW they were asking $1400 for the Peter wright that was not in the best of condition.

[@paulsawczyc5019]

@@jk3dad Prices will plummet to scrap value when the fad dies out - it happened with wood planes.

[@joesikkspac7904]

You could put mouseholes in with a few cents of cores. It depends on if the company who made it wanted to be deceptive. I worked in a foundry for over a decade. We made everything from sewer lids to high tech transmission housings. We did 8 different kinds of grey iron and almost as many ductile irons. It was fun working there and I got emensely strong. I also had multiple surgeries to repair my body. Still, being able to jerk a 300lb manhole off of the floor and slam it on a table to be chipped and ground was invigorating!

[@jackiesanders489]

Back in the 70's the company i worked for moved to a new location and scrappd a lot of iron and steel scrap, I purchased for $13.00 an Anvil i later found out that was made at the Rat Hole Fordge in Sheffield England in the 1700's. ?? maybe it was the Mouse hole, (cant remember. I recently gifted it to a nephew that was playing with fordging and welding.

[@thepangolinforge]

I have a relatively small fully cast steel anvil from an unknown manufacturer, a medium sized cast steel with a forge welded face Brookes England, and a large forged anvil from another unknown manufacturer. And i was able to identify the way each was made, by all of the signs you've mentioned. Each of them was a rescue from a different place and i am happy i can give them a home where they're useful and not just decorative.

[@jerrym1240]

Am 61 yrs old and I learned something new today. Been around tools all my life, graduated from Nashville Auto Diesel College in `80, joined the USN in 88. Engineering can be a fun, rewarding field pending on what you are doing. I like to tinker with woodworking now, have pulled my fair share of wrenches. Growing up in rual WV nearly every farm I can remember had an anvil, some had forges. A do remember the ring they made when hit with a hammer, the rebound I am unsure of. Thanks for making this video, it was good to see you again.

[@calebdoylewest1560]

I graduated from NADC which is now Lincoln Tech in 2019. Great school and awesome history.

[@TheDawgdriver]

I think I remember you, we may have worked in the same trucking company shop, I was the guy from Alabama, I ended up driving for them and later returned to alabama.

[@BrucesShop]

Thanks I have an old Kohlswa anvil. It has rough edges but it is flat and true. I installed it on a stump from my own property and it is now an heirloom for my family and I.

[@barefoofDr]

My anvil is forged and has a beautiful ring all across the face. I never knew about the ball bearing drop to test them. Thanks

[@jakedugar5081]

Man, I love that Fisher setup. From the anvil to the stump. Awesome work station!!

[@e-curb]

Touch it on the side with a grinder. Orange sparks = cast iron. Yellow sparks = steel.

[@pault151]

Great to hear that someone still knows the spark test! Best to have a sample of known materials to learn what the spark stream looks like on your particular grinder. And someone selling an anvil may not take to having a grinder applied to their item....

[@nathanoesterling6523]

So informative! I really do appreciate the content you guys put out. Keep up the Good Work!

[@azenginerd9498]

I would like to see an addendum to this showing examples of what NOT to get besides the delamination.

[@PurityVendetta]

Brilliant video and I'm sure this advice is going to save me some heartache as I'm looking at anvils at the moment. Thank you.

[@tonyneville476]

I acquired an anvil years ago stamped early 1900s. I will have to do the ball bearing drop on it. You’ve fired up my inquisitiveness

[@shelleyfossen3784]

Good information! I'm trying to encourage my husband to sell ours. It's been in the family for generations and has held down our basketball hoop in the wind for 25 years. Well, the basketball hoop stand twisted in the wind this spring and here the anvil sits in front of the garage. I appreciate your knowledge and I no longer shoe my horses, so not sure why we're keeping it.

[@Michaelgzw13]

Great, informative video. Now, just need to figure out what to do with this information.

[@frederickbooth7970]

We have an ancient blacksmith anvil with no horn that has a hardy hole as well as a slot at one end. We found it on the banks of the Nehalem river in 1980.We have used it for many years to shape steel & aluminum horse shoes. When we began to learn how to shoe & trim horses feet we could not afford an anvil & our mother suggested we ride our horse, Turk, to Nehalem and look around the muddy banks for an anvil that might work. Sure enough after a couple of hours searching we found one. The 1 we have is rectangular & weighs about 45#. Light enough to be portable enough to haul on a saddles horn which is how we brought it home. The anvil were sure is cast as it has many of the same markings you point out & is kind of soft with with only a little ring to it. It also has 4 mounting holes at the bottom that one could mount it to a work bench if desired. Nehalem was an old timber/ logging town. The town has at times severe floods & that`s why the anvil was left there many years ago. Unfortunately no makers marks that we can find. Very handy tool which we still use today even though we no longer shoe horses at 66!

[@drd1924]

How did your mom know an Anvil would be on the muddy banks? What a cool story!

[@frederickbooth7970]

@@drd1924 Nehalem is a very old town & my family has worked on many of the old buildings ancient plumbing systems which only my father knew how to repair since he was raised & trained in Nutley NJ. There are & were many old structures related to logging & agriculture located along the Nehalem river since the river was used for transport before trains & vehicles. Many of those buildings were blacksmiths shops at one time. She figured since anvils are so heavy one might be there still & also because of the many floods along the river she also thought one of them might still be there perhaps washed down river.

[@ronskancke1489]

@@frederickbooth7970 hard to believe an anvil would wash down a river because of their shape and weight. Not impossible I supose if it had no horn.

[@frederickbooth7970]

@@ronskancke1489 Were thinking it was abandoned during many of the big floods that happen along the uncontrolled river without any dams along it. Many times the whole town would be just about destroyed from the severe floods. Especially during the great 1998 spring flood that cutoff the area for > 2 weeks due to all the roads being washed away or landslide covered.

[@216Numbskull]

​@@frederickbooth7970 Speaking of "trains," that's exactly where I found my anvil. As kid's we had to cut through the R.R. tracks on our dirt bikes to get to our dirt track we made. Grateful to be a bit mechanically inclined, I was into wrenching on my own bikes, motors, & fabricating different things out of metal. One day I was in need of an anvil to pound on to form a tool I thought up. (I watched MacGyver a lot as a kid) Blah,ha,ha!!! So, I seen a 3 foot piece of R.R. track scrap leftover they threw to the side after fixing part of the tracks & had an idea. I got my older brother to drive us back in his truck to help carry this scrap piece of track back home, pulled out the torches & grinders & got busy. Not only did I end up making the tool I designed & needed, (which worked pretty well) but I made it on an anvil I made myself out of a piece of R.R. track I still have & use today that works great! Just an idea to pass on & share.

[@konakona895]

Just came across your Channel. I'm really glad to have. You are very informative. Highly knowledgeable, a great speaker and equally as great a teacher! I am a new privilege subscriber! Thank you very much!

[@misterhat5823]

I miss these videos. Hopefully there's more like this.

[@Jus00]

Didn't think I needed to know this but now I know. Great demonstration!

[@georgedistel1203]

Wow , loads of information . I still have my granfathers anvil that he used when repairing things on his river boat among other things, he was a very talented man along with his brothers. I will have to check it out and try to identify it thanks again.

[@markfryer9880]

What ever else you do, don't loose that anvil! That is something which represents your family history and your family needs to be aware of it's value, particularly the female members of your family as women tend to have a habit of getting rid of things from a man's workshop and not knowing the value.

[@georgedistel1203]

@@markfryer9880 Trust me it's not going anywhere!

[@henrysara7716]

Thank you for sharing. During my high school years we have foundry as a credit class. Which gave me so much pleasure to work hammering, heating and shaping the steel to reach dimensions neededed to be adjusted and later tempered.

[@andrewalexander9492]

Technically that a forge, not a foundry. A Foundry is where you cast metal. If you're pouring molten metal into a mold, it's a Foundry, if you're beating on hot metal with a hammer, it's a Forge.

[@henrysara7716]

@@andrewalexander9492 we cast in black sand boxes too as part of curriculum

[@henrysara7716]

@@andrewalexander9492 we had big metal boxes (I don't recall its name )were air was injected grom bottom to the carbon fireplace we hold our steel rods and we hit with our heavy hammers to fibal shape.

[@homes24]

I'm not planning on buying an anvil any time soon but if I do I now have to confidence and the knowledge to do so. Thanks!

[@michaelblosser5277]

Thank you for the video but what would be nice is if you explained why a forged or cast anvil is better and the pros/cons to each. Also the value difference between them.

[@holeshot1721]

One would think! 🤔

[@jimmysblacksmithing462]

Hey good day, Know a bit about Anvils, however don’t claim to know it all. However cast Steel Anvils, are very good. However depending on who manufactured it. As well as forged ones. There’s a difference in quality in all of them. Some have a good reputation and so on. However it is good to test them individually yourself when purchasing one. And of course depending on the work to be done on it. You do not want cast-iron Anvils. For light small work they are just fine. However the forged and cast steel Anvils are the way to go generally speaking. Hope this helps you. Good luck and have a beautiful day. Jim

[@jimmysblacksmithing462]

PS, forgot to mention one thing. Usually any anvil, is better than no anvil :-)

[@darrylgibson3575]

I took the video to let me know that cast anvils are better on the ears.

[@jk3dad]

Very informative, watched the Legacy of a blacksmith again. Great tribute to master of his craft. Makes me think what my headstone would look like.

[@1straightcut]

Really excellent information presented here. Thank you!

[@MartilloWorkshop]

I'm getting real tired of the rebound myth. Rebound doesn't matter when you're hammering a hot, very plastic and ready to deform, piece of steel. You're not hammering on the anvil, you're hammering on the hot steel, and the steel will absorb almost all of the force by deforming, so the difference between an anvil with high rebound or no rebound is close to none. An anvil with 90% rebound vs 10% rebound doesn't matter when the potential force lost is a fraction of a fraction of what the steel is already absorbing. It's one of those old blacksmith myths that everyone just runs with because it sounds like it could be true. I have 10 anvils in my shop used for classes, two of which have no rebound, and there is do discernible difference in how they are to forge on besides their weight. It's a shame to tell beginners that an anvil with no rebound is no good. It's simply not true. There's a reason you have never seen anyone showcase the supposed issue with low rebound anvils while actually forging; because it's not there. The issue is with hardness. A soft anvil won't last as long or as well as a hard one. But it doesn't affect how the anvil performs during actual work. And while we're at it; The only care you should have about ring, is to minimize it.

[@andrewalexander9492]

Interesting to hear you say that. I'm not a blacksmith by any means, but know a little about physics and metallurgy and as I was watching the video, was scratching my head and thinking ... ok, so if the anvil itself doesn't deform, and is heavy enough to not to move appreciably, what does it matter?

[@ADBBuild]

I think you are thinking about this the wrong way. It's not that you want rebound, it's that rebound is an indication of the things you want in an anvil; hardness and a face that isn't delaminated (among other things I'm sure, I'm no expert). I think the myth is that rebound is the thing you want, when all it really is is a test to check other things.

[@lipsfan72]

Rebound makes worlds of difference whenever you are doing colder work. It has been desired for centuries for a reason.

[@revjohnlee]

I have no need of the information I just learned about identifying whether an anvil is forged or cast but was interested even so. Now that the video is over, though, I find myself asking the fundamental question that I don't think was answered. Why would one prefer a forged or a cast anvil over the alternative if the other criteria (rebound, ringing, etc) were comparable. Just curious.

[@brucea550]

Ann experienced blacksmith might have a lot to say about this video, not all positive.

[@designsbynoz]

Some of the same traits apply to forged vs cast crankshafts. Also, you have an incredible voice. I could listen to you describe paint drying.

[@truthinkr2931]

My GGFather was the last blacksmith of a small Western Michigan town. I Bought a drop forged RIDGID Paddingheus 35 anvil two years ago for $800. Now sells for $1,000 if you can find it. Scratches and dings only make it more valuable. Great investment.

[@hazel555]

Very informative and interesting, thank you!

[@davebrock6618]

wow what a great video, great knowledge you passed along Scott.

[@vanish85]

Hey Scott, when you gonna visit a casting anvil place? No idea if there is a place close enough that's worth visiting just to shoot a video, but it would be an awesome one !

[@jimmysblacksmithing462]

Hey good day, great informative video as always! You are helping everyone learn something special each video.! Great job!Thank you very much. As much as I know or, I think I know :-) there is always something to learn from somebody else. It is wonderful! Keep up the great work! Stay well and have a beautiful day. Jim

[@ypaulbrown]

so great to watch your program again......I have been missing you or the algorithms have been leaving you out of my page, best wishes from Florida, Paul

[@classicmula]

Thank you good sir, you’re a gentleman and a scholar. Been wondering what some good indicators are.

[@generalesdeath8180]

You guys are awesome for offering everything at $9 a month! The biggest obstacle for me was the $297 entry price for the blacksmithing course (after finding an anvil or buying the tools necessary to make one and a forge of course) and it just seems to put it within my reach to get everything at a low monthly price. I was in a really bad car accident in 2009 that messed up my back and neck and I've been fighting the pain ever since. That pain has taken a lot away from me including steady work as I've made a living off of what I could build or serve someone and the last 3years have been the worst of my life as far as pain and work go. I just keep praying that I can get back to making things with my hands again and your course gives me something to aim for. Until then I'll keep looking for remote work from home employment opportunities. God bless from Florida the last bastion of freedom.

[@michaelsolomon3940]

God Bless you, and the fact that you keep trying and don't give in , i will pray for you i hope that's ok .

[@lewiswereb8994]

20 years ago my little blacksmith shop (hobby) got me into knife making .I usually give them away or horse trade them, or sometimes sell one. I make them from used lawn mower blades, which are excellent spring steel and free. Still a hobby, but yesterday I got 200 dollars for two of them. If you want some free advice on the entire endeavor, reply here. Lew

[@truthbebold4009]

​@@lewiswereb8994 I'm interested in learning blacksmithing and other skills to pass on to younger generations.

[@Argyll9846]

Excellent guide to checking out anvils.

[@jfro5867]

That was great. Just bought an anvil today, used, from a retired blacksmith, would have been better if I had seen this video first but never mind too late now! So, I think my anvil will be forged (mouse holes), no obvious casting emblems or marks, might have to paint strip it to see if there’s any faint stamping marks on it. It’s in very good shape. Must go and do the ball bearing bounce and ping test now……

[@lukeb3930]

Odd to hear so much about how it was made but nothing about why it matters. Very interesting!

[@brianpencall4882]

Buick and Oldsmobile 215 aluminum engines from 1961 to 1963 have cast steel crankshafts, which ring beautifully.

[@ME-pb2gf]

Every anvil starts from a casting. The rebound is only from the Rockwell hardness. High quality tool steel has been cast for decades.

[@catman4644]

Yes you're right and even the title of this video shows a basic misunderstanding, "Cast or forged" when "cast IRON" vs a STEEL anvil would be more appropriate for a title. Just because a steel anvil rings or rebounds when struck simply means it's steel not necessarily a forging and steel castings are not usually inferior to a forged item. There are cheap CAST IRON anvils and there are high quality CAST STEEL anvils but some folks just seem to use "CAST" to refer to cast IRON as if all castings are one of the several grades of iron! Then it's a common mistake to refer top quality steel castings as "forged" when they were in fact cast.

[@brucea550]

@@catman4644 I’m not versed in blacksmithing, but this video didn’t teach me much. The only thing I know about my anvil is it doesn’t deform or crack when I use it, and that’s really all I care about.

[@Articulate99]

Always informative, thank you.

[@innnlove]

why would you prefer a forgery over the real deal

[@Emiliapocalypse]

Beat me to it, here’s a like 👍

[@LakshmananLM]

Was thinking this too. Congrats on being faster!

[@Whipple1]

Had me at “forged.” Thumbs up!

[@WayneWerner]

I thought that's what this video was at first 😅

[@Wreckz_Tea]

Ha

[@richw9205]

Same may say you have an anvil problem my friend. 😂🤣 Thanks once again for instilling upon us your wisdom and knowledge. Y’all are fantastic.

[@keithkimsten5111]

My apologies if I repeated some of your tutorial in my reply. My hearing is shaky at best.. LOL. Anvils like any early made tool had their good and bad aspects. The dead spots were mostly due to poor forge welding of the "top" work plate onto the Anvil body. The older forged Anvils had no top plate thus had no dead spots. They were forged in three pieces, footbase, body and horn(s). I was the last A-Rated Industrial Blacksmith in my area within the Copper and brass Industry in the 1980's. It was a great job but as with the loss of industry to foreign slave labor countries the Industrial Blacksmith went the way of the buggy whip... I continued to forge in my home shop but due to health reasons closed up after 15 years. Anyhow, thanks so much for bringing back those memories in my old worn mind.

[@tubularfrog]

Great information. Thanks. Also you have a really good broadcast voice.

[@markb.1259]

Scott, for those of us who aren't blacksmiths... which type of anvil is the preferred type? Forged or cast?

[@andrewbrown6522]

Same.

[@GenderSkins]

Best way I have found to learn how to be a blacksmith, is to learn the trade as an apprentice to a blacksmith. That is not saying that you cannot learn from online courses, as that works great for some people. And I love this guys video’s, as he is highly skilled. But he still cannot teach things that I learned through hands on training under an old school blacksmith and that’s been over 30 years ago. I think anyone would also be a fool to not listen to this man, as he has a wealth of knowledge to share.

[@arturwojcieski5042]

Thank you. I joined a blacksmith club for couple of years becauseI couldn't pass it by. Then after I learnt that my great grandfather was a blacksmith. I love it.

[@skyborne80]

I will never have a use for an anvil in my life, but this was an interesting thing to know. I never would have otherwise thought that there were different ways of producing an anvil.

[@howardemery1443]

nice job Jim

[@AircreteHarry]

Great Information. Thanks!

[@vasileherman2860]

Very well explained well done! 👏

[@GalenCop9]

Great video, thanks for posting!

[@williampollard5790]

Very good video this one, I am a carpenter but found this very interesting 👌👌

[@dannpd1955]

Excellent education for me. Thank you sir.

[@tobhomott]

Can you make out the parting lines on the first anvil you showed? The mounting lugs appear to be offset from the center of the anvil. If I'm seeing that right it means the mold and pattern was a little bit more complex than the one they used to make the Swedish anvil. Nothing the old school molders and patternmakers couldn't handle, but interesting to me as a foundry hobbyist.

[@saradolphin3242]

I Learned A lot Thanks!

[@ImpalamansGarage]

Thank you for the tips !

[@Isaiah-ft5nx]

I love your blacksmith content!!!

[@terrywillis5784]

Great video. Great presentation. I learned a lot !!!

[@Kareszkoma]

Thank you! An amazing video and so much information. It's great. Thanks!

[@truspirit1925]

Great info thanks for ur time.

[@stefanpopescu6479]

Extraordinary video. Exactly the same thing I was trying to prove when I was a young engineer and everyone was laughing at me

[@kulturfreund6631]

Another great video. You make an excellent presenter .

[@BrucesShop]

I see some comments below. The trades are the future for any young person . The world needs you. I am 67. I still tinker in the shop and my standad of living has been elevated by my knowledge of the world around me. Thanks for letting me comment here.

[@rustyshackleford5060]

Keep up the good work

[@dennisalloway5788]

Thank you. I learned a lot.

[@QuantumMechanic_88]

When collectors know the difference between cast iron and cast STEEL , they have learned much.

[@percarlsson792]

Perhaps cast, but Kolswa anvils are usually really great. Happy that you had one there

[@brandenlebowski6826]

Considering the "noise" a forged anvil radiates: Slap a big magnet on it. It works wonders.

[@charlesjenkins615]

Great video 👍👏

[@erictaylor5462]

My welding instructor also did blacksmithing. I learned a bit when I learned to forge weld and I really enjoyed it. As to protecting your hearing, I have worn ear plugs at work for my entire career and by hearing is very good for someone my age who has worked as a welder. Just a quick question, if I buy a forged anvil, is it still against the law to pay for it with a forged check? 😜😜

[@jonperley7304]

Thank you very interesting I'm in the market for an Anvil!!!

[@DavidWestBgood2ppl]

That was awesome!!!

[@peterd2587]

Thanks for the info

[@DUDE72341]

Passing this information onto the younger folk is essential in, quality or workmanship and pride....and just questioning your tools for fit and feel or in this case visual and sound.. Great job Coach👍

[@gordbaker896]

Is a hardened steel plate welded to the tops of some anvils? If the plate is not intimate contact with the base there will be a different ring. A Forging does not have to be hot to stamp it.

[@semiproactive9625]

Thanks for the informative video. I have 50 years of welding experience, but none on hand forging.

[@xs10tl1]

I was stoked up thinking you meant a Forgery of an Anvil. well played.

[@joselalvay6780]

Great Video! Love it!

[@AsitShouldBe]

nice video, thanks

[@luismenezis7344]

friend your work and very special you are one of the best in the world in your work congratulations friend.

[@BlazingShackles]

Your authoritative delivery style is so last century. I bet theres nothing you don't THINK you know.

[@notmyworld44]

Thank you for this great information. Now I have a clue as to the quality of Harbor Freight's Chinese anvils.

[@robertgift]

Well done video. Thank you. Must leavearly. Which is better. Cast or forged?

[@stephboeker7835]

Did I miss hearing you describe what uses best fit "cast" or "forged" anvils ?

[@jons2447]

Thank you, Mr. Wadsworth! Have a GREAT day, Neighbor!

[@Jagg61]

Very good vid. Thank you

[@astronautdolphindetective6908]

very informational

[@vitaliyjuterbog8912]

I didn't know I needed to know this!

[@seachers6124]

What an excellent speaker !! I may join up . As to the preference of a forgery verse real query ?? He was honest about it and why . Problem solved .