How to import a image into Vectric Aspire and VCarve Pro

A Tutorial on how to import a image into Vectric Aspire and VCarve Pro.
Thanks for watching!!!
YOU CAN ALSO FIND ME ON THE FOLLOWING:
PINTEREST: / davidhoard56
INSTRUCTABLES : www.instructab...
INSTAGRAM: / davethewoodworker
LUMBERJOCKS: lumberjocks.com...
Also remember when using power tools, always use proper Safety equipment, like Safety glasses and hearing protection.

[@HatlessChimp1]

This is perfect! Short and to the point! Thanks

[@davethewoodworker1043]

Thanks

[@kristiaand]

perfect, really helpful and clear. helped me work it out in Cut2d cheers!

[@davethewoodworker1043]

Glad it helped

[@marrazzowoodworkingdiy8118]

Thanks for the video. I recently downloaded V Carve Pro and am glad I no longer have to use Inkscape

[@davethewoodworker1043]

You're welcome

[@JoeLazzara]

Good!! Now you can teach me. 😄😄

[@rodrigosouto3809]

Thank you very much!👏

[@davethewoodworker1043]

You're welcome

[@jimking9646]

Nice info I'm always learning something

[@davethewoodworker1043]

Glad it helped

[@carlmainwaring4349]

Thanks. Love the detailed explanation. Keep them coming.

[@davethewoodworker1043]

You're welcome

[@Wood-In-My-Eye]

I’m new to vcarve. I usually use easle. So thank you for this. Do you have a video of how to carve from here? After I set my picture up. What next would you have a video of that. I personally believe that’s why people use easle. It’s super simple. However misses so much detail in the carve.

[@jamiejeddreyful]

You made it very easy to understand and follow. Thank you

[@davethewoodworker1043]

You're welcome

[@frankmartinmillworks2356]

Simple and right to the point, thank you

[@davethewoodworker1043]

You're welcome

[@PLINKER]

Thanks I'm tryng to learn.

[@FinoClips]

Muchas Gracias por el Tutorial! Me srivio mucho. Thanks!

[@davethewoodworker1043]

You're welcome

[@michaelbreaux9164]

Thank you . Might have to splurge to get Vcarve Pro.

[@davethewoodworker1043]

You're welcome

[@jeffreysmall4663]

Does this work in Vcarve Desktop or only Vcarve Pro

[@tinyturbo317]

Truly appreciate this video!!!

[@davethewoodworker1043]

You're welcome

[@davethewoodworker1043]

Thanks

[@davestrains6816]

Pretty neat. You need to get yourself a 3D printer to play with. Thanks for sharing. Dave

[@laurenhasty8525]

Thank you!! You’re a lifesaver

[@davethewoodworker1043]

You're welcome

[@andreww6738]

Thanks for sharing your experience, I did learn from your video how to use the trace a bitmap, that was helpful. I am actually trying to do a Nissan logo, but having issues understanding how to do the same thing, but find B&A doesn't work well and with using colours I can't seem to some in on the colours properly without lots of other background stuff coming into play, stuff that isn't even fixable at the vet go. Maybe the image is to complicated? I would love to carve it in 3D at some point. Just hacking around with it, but can get a wee bit frustrating. Any tips? Thanks, Andrew

[@davethewoodworker1043]

Try searching for a black and white image, of the logo to trace

[@Francisco-uw1zc]

great video thanks for the help

[@davethewoodworker1043]

Thanks glad it help

[@staceymiller5046]

Great Video!!!

[@davethewoodworker1043]

Thanks

[@eddyandchrisnz9793]

Thanks for the video. It helped me a lot. One point though, a lot of the images available on the internet are copyright. Just saying ......

[@davethewoodworker1043]

You're welcome, yes I know

[@Vastfill]

Hey Dave, the video title says "Aspire and VCrave pro" Does that mean they both have the same interface?

[@davethewoodworker1043]

More or less the same, Aspire let's you do more 3D modeling. But importing images are the same

[@phyzxengrmoore6928]

I imported a black and white bmp. There is a bitmap layer and a new layer from the tracing. When I turn the bmp layer off the image doesnt change. The new layer1 has everything on it. So when I turn layer1 off everything vanishes. I am in aspire 9.514.

[@davethewoodworker1043]

That means it traced it good, that's what you want

[@phyzxengrmoore6928]

@@davethewoodworker1043 I asked this because you turned off the bmp layer and the display then changed to show only the vector outlines. My effort did not. There is nothing on my bmp layer. The bmp and the vector traces are on the new layer. Also where do I set the cut depth?I have a Warthog 4'x8' table that I converted from Enroute3.1 to Flashcut and Aspire9.514.

[@Jose-qk4oq]

Thanks

[@PLINKER]

Are you leaving your V-Carve open when googling to grab your image?

[@davethewoodworker1043]

Yes

[@marceaton3128]

Dave, do you always save images as a JPEG?

[@davethewoodworker1043]

No, but you find more of them. If possible, i find a svg file and open it in inkscape and convert it to a eps file.

[@smeglin1]

i've been successful simply "saving image as" and just typing in jpg as a file extension- and it'll save as a jpg.

[@karroumbrahim7215]

Mrc

[@nicholasengeln2273]

can you please say DAMMIT BOBBY

[@dickcardwell6307]

That would be "an image"